Load paper printer

Similar Questions

• HP Photosmart D5360: How can I load paper printer

  I just bought this printer and have problems to load the paper. I think that it is loaded in the back of the printer, but I don't know how to do it.

  Thank you

  Hello

  Please use the following Manual:

  http://h10032.www1.HP.com/CTG/manual/c01151748.PDF

  Chapter 6, page 15.

  Kind regards.

• Canon lbp5050n says load paper printer when the bin is full

  Worked very well. I reinstalled the driver - no change.

  Hi Michael,

  Thanks for the reply.
   

  Run the fixit:

   

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

   
  As we tried possible measures to solve the problem, I suggest you to contact Canon support for assistance on the issue.
   
  For Canon printer Support:
  http://www.Canon.ca/inetCA/contactus?m=loadcontactus&lang=en&commId=3&typeid=1&msegid=2
  Hope this information helps you. Please report if you encounter additional problems with Windows in the future.

• error to load paper in the tray of the printer

  Although I have a lot of paper in the tray of the printer, my hp c309g-m all-in-one printer screen tells me to load paper, that is, the clip from the sensor to the rear does not work (the one with the Green Strip of rubbery material about it, I guess.) I removed and put it back on a few times, thinking it was wrong set, but it didn't work.  I cleaned the rollers, etc., too.  I try to use the same types of paper, I used for a year without problem.

  I have half of my book printed and don't want to change printers because the quality is not exactly the same thing. so, I would BE ESTATIC IF someone COULD HELP me to SOLVE THIS PRINTER.

  Thank you very much

  You need to contact HP about whether a repair is possible.  It is a hardware problem, not a software problem, and you can do that in Windows can ignore this error.

• HP photosmart d110a printer load paper message demo lights after power to the top

  After changing the black cartridge, when I turn on the printer, it always comes up with the message "loading paper".  There are in the paper machine.  I removed, repositioned, tried different papers, etc.  I have the choice to see the demo or "OK to continue".  Whatever it is, it then puts to the top of the screen, which suggests that I run the alignment process.  It is the only choice.  When I press OK, it now says 'print alignment page' and displays the blue bar pulse, the Red 'X' and the power button flashes, but it remains that way forever.   Oddly enough, I can still print, even when paused trying to print the alignment page.

  Hey there. Try following the steps described in this paper: a "undetected alignment page" or "Cannot be alignment" Message displays on the all-in-one

  Even if the title is not correct for your mistake, it goes through the same troubleshooting steps. Let me know if this is not the problem. If she does not show returns with a new details and we will continue from there.

  Good luck

  Sean

• HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

  I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

  Hey @cmm3,

  Welcome to the Forums of HP Support!

  I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

  Step 1: Load the paper:

  To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

  Step 2: Check the print settings:

  Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

  1. Open Word and click mail merge to top
  2. Select "envelopes" in the upper left side
  3. A page of envelopes and labels should now open. Enter your delivery and return address.
  4. Select 'Options' on the lower right
  5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
  6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
  7. Make sure that you choose the option "Face down".
  8. Also ensure that 'right-hand Rotation' is selected
  9. At the bottom of the window, select the drop-down list of pet food
  10. Make sure that the feeding method is set to main tray rather then select automatically
  11. Press 'OK' and 'Print'.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• my printer image Runner 2520 collapsed impression after that installation says load paper so he asked peprs on two sets

  I recently installed a new Image Runer 2520, I used for 2 days then upgraded my computer to Windows 7 Professional, when re-installed the driver soft order print a message "loading paper".

  Thre are paper loaded on two trays, main and Baypass.

  Kindly help

  You need to contact Canon support for the answer to your query...

  This is the support site for UK...

  http://www.Canon.co.UK/support/

  and it is the global site (I think)...

  http://global.OCE.com/products/Canon-imageRUNNER-2520/default.aspx

• The printer message ' load paper in the printer "appears when the paper is still in the status bar.

  I rebooted the paper in the tray several times, and the message still appears. I have tried rebooting printer several times and the message to load paper continue to appear.

  jmtbat

  Please read this post then provide some details.  What printer model?

• CP1515n printer says "Loading paper", but the paper already loaded

  Printer ran out of paper and displays "Loading paper", so I loaded the paper in tray 2 as usual, but when the drawer is closed, the message has not disappeared. I rebooted, unplugged and rebooted, reloaded the paper, checked for jams, run the diagnostic utility that reported no errors, but I can't get rid of the message and the printer now will print from Tray 1 by feeding manually in individual sheets.

  Anyone have any ideas?

  Minskintin

  OK, I managed to fix myself luckily.

  Just at the back of the paper tray 2 there is a little black tab that drops down when the tray is empty and interacts with a contact at the back of the printer to tell him, it's empty. This tab bit had folded and was not fall in the right place, not more. I carefully folded it back and it works perfectly now.

  Phew!

  Minskin

• Loading paper folding in Z for Designjet T1100ps

  Cannot load paper folding in z for HP Designjet T1100ps

  Not an update of the firmware will not help, more research shows that this printer is just not set up for this type of paper.

• 1209: loading paper HP inkjet all-in-one

  I need to know how to load paper in my all-in-one, inkjet 1209.  It was my husbands printer.  He died so I can't ask him.  I tried to find the answer online, but I can't find anything.  I hope someone can help me.

  My condolences on your loss.

  The document here can help to load the paper for your HP PSC 1209.

• HP Officejet Pro 8630: HP Officejet Pro 8630 Setup loading paper

  I have a new HP Officejet Pro 8630. Through the installation process, it is stuck at the loading paper. I loaded the paper in the upper and lower trays. I checked the trays and cartridges are seated well. Clicking next translates into a printer Calibration cycle - then returns to the loading paper. Help! Thank you.

  Hey @Zaldar,

  Welcome to the Forums of HP Support!

  I understand that your Officejet Pro 8630 e-all-in-one printer doesn't detect paper during initialization. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed this document explains How to solve problems of choice with your printer. If at this point, you are still unable to initialize the printer, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to discuss the options.

  Please let me know if you are able to reach a resolution. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Message ' load paper ' wrong on Officejet 6500 has more

  I get a message ' load paper ' on my Officejet 6500 has more.  When I first got the printer and installed with my office, it does the same thing, but he stopped after a download from HP.  Today I installed it on my laptop, and now it gives several times the same message despite that I have loaded and reloaded varying amounts of paper.

  Windows 7 64 bit

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  http://goo.GL/NeUWY

  Good luck!

• Want 5660: How can I load paper 5 x 7 to 5660 want?

  5 x 7 is mentioned in the user manual as one of photo papers suggested.  I bought some, now how I load into the 5660, please?  The photo tray seems to accept only 4 x 6.  Worked great with the paper of the sample that came w/printer.

  Hi @byronw,

  I'd love to help you load paper 5 x 7 in your printer Envy 5660. 5 x 7 is considered more paper, that being said, please, look at what I found in the Manual (p. 11) that I thought would help:

  To load small-size paper

  1. remove the photo tray. If you don't see the photo tray, remove the output tray on the printer.

  2. load paper.

  ● Insert a stack of photo paper into the print photo tray to the bottom side.

  ● slide the photo paper until it stops.

  3 push the photo tray in.

  4. change or keep on the screen of the printer paper settings.

  To load paper large format

  1. remove paper tray, slide the guides to the width of the paper to the outside and then remove any previously loaded media.

  2. load paper.

  ● Insert a stack of paper into the paper tray with the short edge forward and the print down side.

  ● Slide the paper forward until it stops.

  ● Slide the width guides of the paper inward to the stop on the edges of the paper.

  3 push the paper tray in.

  4. change or keep on the screen of the printer paper settings

  I hope this helps. If you need assistance please do not hesitate to let me know!

• MX432 load paper more

  My MX432 had a jam of paper some time ago and now it seems that it will not load paper unless I push it.

  Hi maidenjane,

  To try to resolve the problem, with a flashlight or other light brilliant, please check the area of the paper feed printer and check that there are no pieces of paper or other obstacles to the printer that can cause the error.  Then, please make a roll of clean the unit by following the steps on the below link:

  PIXMA MX432 cleaning roll

  We recommend that you try at least three cleanings of roll.  If the paper still feeds not correctly, the printer may require maintenance.

  Please call or write to us at one of the methods on the contact us page to get your service options.