LaserJet pro 400 m401 will not pick up paper

Similar Questions

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations

• LaserJet pro 400 m425dn mfp: mfp laserjet pro 400 m425dn will not connect to the network

  I just bought a mfp laserjet pro 400 m425dn printer/phtocopier and I can't seem to connect to our network.  I have it plugged into the router and it says "cable disconnected" without an IP address.  I don't have the USB cable to configure the machine and I was hoping to do it via the network (which tells me is an option).  I don't know if that has something to do with it.

  Any help would be greatly appreciated.

  The printer should be released the box set up using DHCP for addressing.

  When plug you it into the router it should pull an IP address, if it is its cable disconnected then you might have a bad port on the router, a bad cable or a bad printer.

  Plug something else into the same port with the same cable and see if it works, if you have a defective printer and need to return it and get a replacement.

  You may also be able to find someone to replace the trainer who has the network port to it.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Inkjet Pro 8600 more will not pick up paper photo

  The printer works fine with regular paper, but I was not able to pick up the photo paper.  The printer keeps issuing the message "on paper."  The book that I use is Kirkland Professional Glossy Inkjet Photo Paper (68 lb 10 mil.)  Anyone else had problems with photo paper?

  The paper is thick.

  

• LaserJet pro 400 mfp wil not install

  I tried setting my new laserjet pro 400 color mfp m475dn, two upward ways described in the installation guide; either via the automatic installation and CD rom. I followed the instructions exactly each 10 times I tried. I even downloaded the software again on the HP site and tried to install that. Each time the same result:

  "Install operation has been too long..." Fatal error etc."after he had reached and hung 99% installed.

  Any ideas guys?

  I am running Windows Vista Ultimate 64-bit.

  See you soon,.

  Neil.

  ndpadgett,

  You have two options:

  1. If you try to install this printer via a USB port, please do a network install and use the driver from hp.com.

  M475 solution print driver full

  2. If you unble to do a network installation, then please look to see if you have a universal print driver installed on your machine. If you do, then you must remove the UPD driver, re-boot and re - install the m475 SW.

• HP 8600 more will not pick up paper photo

  1 HP 8600 stand more

  2. with the help of Windows 7

  3 error message 'in paper '.

  4. This is a new printer, works very well with plain paper

  5 printer is not picking up quality photo paper.  To receive a response like "use photo thin paper", that is to say, not quality, is not an acceptable option.  If a more acceptable answer is not given, my answer is to turn the machine to another machine.

  Answer: To get an Epson. It solved the problem

• OfficeJet Pro 8600 (CN578A) will not feed photo paper.

  New N911A will not feed paper tray default photo. It gives an out of paper message. Regular paper feeds very well. The optional feeder is not installed (I have not). This is a brand new, out of the box machine replacing a C7280 with failure of distribution of ink. I used this article to all my printers previous HP with no problems. This is HP Advanced Photo paper (66lb/10.5 mil, sense of self)

  Just got off the phone with HP... my printer BRAND NEW so... Remove the tray paper... tip top printer has left... using a clean t-shirt... Clean the gray rubber roll... a little... hard paper will feed properly...

  That is all... should not have to do, BUT it's best that packing this f * er on the rise and water and the ascent to Costco...

  have a nice day

• LaserJet pro 400 m425: laserjet pro 400 m425 does not start

  I recently replace the trainer because of someone damage the port network, has worked the case. Works very well with the new trainer for the days, one day come to her and the screen is white. power cycle it, the screen remains black all the info/LED button around the display stay turned on, return, cancel, wireless, arrows, etc.

  It is not the trainer, I put the old return it and it has the same. I did not see somehting like this mention in the manual of service or troubleshooting.

  Am I assume the dc controller dead in the wrong way?

  Thank you

  Somehow, my solution was to abolish the POS.

• HP laserjet pro 400 m401 dw - how do you get to recognize the second impression tray?

  We just bought this printer about a month ago, and we love it, so we bought the second tray (or drawer, however you want to think of it) because my biggest complaint every day is reload the paper trays. WE have tried everything we can think of to get the printer to recognize the second tray and pull the paper away when the first is empty, but its does not work. It's like we bought it for no reason. Anyone know how to make it work? Thank you

  You must distinguish between the following:

  • Printer - does the printer itself knows that the tray is present? Check by printing a report 'configuration', or by checking the settings with the built-in Web server. If the tray is not recognized, this implies a physical problem with fitting tray, etc.
  • Of the computer - the printer driver on your system knows that the additional feeder is available? On a system Windows, look at the device settings tab in the printer properties dialog and check the extra tray is set to installed and not installed.

• HP LaserJet Pro 400 M401dw: HP ePrint App and Android 2.2

  Hello

  I hope that all is well.

  How can I find and install HP ePrint for Android 2.2? I just found this link https://play.google.com/store/apps/details?id=com.hp.android.print for Android 4.0 and more. For your information, my printer 'HP LaserJet Pro 400 M401 dw' and my smartphone ' HTC Desire, Android 2.2 ".»

  Thanks in advance for your help.

  We wish you the best.

  Mrwan

  Hello @Pooneh,

  Welcome to the Forums of HP's Support. I understand you are trying to install the HP ePrint app on Android 2.2 device. The ePrint application is only available for Android 4.0 versions and later versions. It is not supported for earlier versions of the Android operating system.

  Sorry if this isn't the answer or the solution you're looking for. If you have any other questions, feel free to ask.

• Printer will not feed the paper card stock

  We have an Officejet Pro 8600 who will not feed the paper card stock. It was the printer that I used when I worked and did a great job on standard paper, but it won't take my wife stock card paper craft. We used to have a Deskjet F4400 HP all in one and we were able to print. Any suggestions would be greatly appreciated.

  John

  John,

  Welcome to the Community Forum of HP.

  Try indicating what type of media you print to the printer - if your media in the printing preferences settings do not understand "card", you should choose something else which is similar: Matt Brochure, card, 'something' that kind of card stock for the printer to the printer waits 'thick' paper looks.

  Printing preferences - Windows and Mac

  and... not really related, but may have some relevance:

  Print Labels_Business-Cards_Cards

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• LaserJet Pro 400 M451dn: Toner HP Laserjet Pro 400 does not fit

  Probably I'm missing a small detail, but after extensive research and contemplate, I decided to ask here.

  I have a LaserJet Pro 400 M451dn, who came into my office with no toner cartridge at all. We ordered the appropriate cartridges, 305 a (checked on the box of the printer and here on the website of HP), three more black color.

  I opened only the yellow and blue, but not appropriate. In the left and right corners close, there is a piece in the tray of the printer which does not allow to slip into the cartridges. Everything seems correct with regard to the location of the electrical contacts, tabs, etc., but no amount of stirring or twist will allow cartridges to fit in the status bar to which they belong.

  I feel a bit stupid if it's something incredibly simple that I'm missing, but I want to know rather than continue to try my own solutions that do not work.

  Any suggestions?

  I don't know there is a way to get it free. I never looked at the model number on the front of the printer, but I have now. It came on the Pro 400 area (where it fit well), then glanced at, very quick inspection, like the one on the box. I worked on the wrong model of printer. It's actually a CP2025 which, of course, uses different toner.
  I'm sorry to bother you. You probably had something valuable to contribute to the world during the past days dedicated to thinking about my mistake.

• LaserJet Pro 400 - M475dw, not recognizing USB drive-resolved

  I've been scanning to .pdf on a USB for about 6 months on my LaserJet Pro 400 - M475dw.  All of a sudden, it says "Insert USB Flash drive" whenever I try to scan, even if there is a pre-installed flash drive.

  I tried all 3 USB keys I've already used, more a few others.  I also tried their reformatting.  All to nothing does not.

  Today, I have updated the firmware of the printer to see if it would help - but no.

  Tried to turn it on and out, several times, including leaving them for a few days.

  Has anyone else had this? Did you solve it?

  P.S. This thread has been moved from Laserjet multifunction and all-in-one. -Hp moderator of the Forum

  handsome young man came out today of HP and replaced, the USB port and the Board at the back of the machine, we have proven that the cable was still very good.  BUT it (I was certainly not int eh room right here) was able to break a little different - so that the ordered summer and he will return to replace the fuser unit tomorrow.

  HP were super helpful and REALLY happy with the printer was still under warranty.

  Thank you for your help chaps.

• LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

  On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

  Very hard to advise without additional evidence (such as samples).

  With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

  Attached is a zip container file:

  • Small text in the abcde.txt file that contains the text "abcde".
  • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
  • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
  • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

  Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

  copy  /b  abcde.prn  \\computer-name\share
  

  in a Windows command prompt session, where:

  the computer name is the name of the workstation;

  share is a share of the Windows printer instance name.

  The resultant prints show the watermark of the SAMPLE ?

  If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

  Can generate something similar to your driver for analysis?

  [You will probably need help moderating to attach files in this forum].