Launch not appearing is not in 11.5.10.2 administration processes

Similar Questions

• I do not change the settings of my administrator. My account is now limited.

  Didn't change my administrator account settings but it changed to limited. The other account is not even at the beginning upward on the desktop.

  I went in the BACK, F8 to boot more known, then try the 'safe' mode, but still not access administration settings. This is Windows XP home.

  There is a built-in Administrator account that cannot be deleted.  Try to connect using this account and then restore on your user account administrator privileges.  To access the administrator account, follow the instructions here:

  'Forgotten your Windows XP Home password? "- Part 3: define a new password as an administrator.
    <>http://support.Microsoft.com/kb/894902 >

  What the "Administrator" settings you can not access?  The quick check for an administrator is to right-click on 'start '.  If one of the choices that appears is "Open All Users", then you have administrator privileges.

  HTH,
  JW

• Error Msg: "not enough server memory is available to process this command" tries to open the network when the folder shared

  Hello.  I did some of my files of Windows XP Dell system accessible on my home wireless network.  When I try to open the folder (which appears in the network folder) on my Sony Vaio with Windows Vista, I get the error msg that I have stated above in the title of this Post.

  The entire message starts like:

  \\DOUG-DELL1\Denises at the bottom of the folder is not accessible. You could

  are not allowed to use this network resource.  Contact the

  Administrator of this server to find out if you have the permission to access

  "not enough server storage is available to process this command" tries to open the network when the folder shared.

  I have a bitmap and a Jpeg screenshot captures showing the specific error message as well as the objects on my network - is possible I can join to this post?

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows Server 2008 32 bit - "not enough server storage is available to process this command."

  My operating system is Windows Server 2008 32-bit. When I install SQL Server 2008, system throws me error.

  "Not enough server storage is available to process this command."

  Free space in my drive C is 195 GB.

  Even I checked upward with IRStackSize, and is to have a value of 50. I still get the same error.

  Kindly guide me to solve this issue.

  Concerning
  Hitesh Parsawala

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  Hello

  Enable or disable the guest account the
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-the-guest-account-on-or-off

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

  \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
  I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
  There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
  What I've tried so far on my pc (XP Pro):
  1. click on start, run, type regedit, and then click OK.
  2. Locate and double-click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. on the right side, double-click restrictanonymous setting.
  4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
  5. close the registry editor.
  6. restart the computer.
  I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
  File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

  The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

  Hello

  Please visit the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

• Operation not supported. Cannot open a document processed by the engine of JRC in the C++ stack.

  I have visual studio 2010 with Crystal reports extension add on.  Everything works perfectly in development (Win XP Sp3).  When I create my Web site and try to access a report crystal on my web server (Windows 2003 R2 32 bit) I get the following error:

  Unsupported operation. Cannot open a document processed by the engine of JRC in the C++ stack. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.

  Exception details: System.Runtime.InteropServices.COMException: Operation not supported. Cannot open a document processed by the engine of JRC in the C++ stack.

  Source error:

  An unhandled exception is generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception below stack trace.

  Stack trace:

  [COMException (0 x 80041811): no support of operation.] A document processed by the engine of JRC cannot open C++ stack.] CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open (object & DocumentPath, Int32 Options) + 0 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open (object & DocumentPath, Int32 Options) CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened (+ 95 + 270) [CrystalReportsException: load failed report.] CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened () + 333 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID () + 31 CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport (context RequestContext, Boolean bAddToCacheWhenCreated) + CrystalDecisions.Web.CrystalReportSource.get_ReportDocument () + 201 Reports_POD 438. Page_Load (ByVal sender As Object, ByVal e As EventArgs) + 55 System.Web.UI.Control.OnLoad (EventArgs e) + 91 System.Web.UI.Control.LoadRecursive () + 74 System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) + 2207

  I installed CR2008, 2011, etc. nothing works.
  I've looked everywhere for a solution to this error.
  If anyone has a solution please post.  It would be much appreciated!

  Thank you

  WS

  Salvation Will Stoner,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the MSDN Windows Server forum.

  http://social.msdn.Microsoft.com/forums/en/vsreportcontrols/threads

• Three computers networked fine then suddenly the error message «...» Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "

  I had a network that worked very well with three 2 computers running Windows XP Professional and Windows XP Home Edition 1. Suddenly, the network has just stopped allowing certain communications giving the above error message (I have another thread address with XP to Vista computers). The main computer with XP Pro, I'll call A, the second computer with XP Pro, I'll call B and third with XP Home will be C. All computers can share files and printers then without any changes to the system that occurred the following:

  A can access the documents and printers on B and C

  B may NOT have access to documents or printers on one, but access to documents and printers on C

  C cannot have access to the documents on one, but CAN access A printer and CAN access the documents and printers on B

  When access is denied error message is displayed:
  "\\A\My documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "(\\A\ being the computer that I am trying to access)

  As I said access from all computers on this network was working fine a week ago and there has been absolutely no changes made to the network. I checked the following

  1. workgroup name on all computers are the same
  2. file and printer sharing are enabled for all computers.
  3. all computers may been from each computers just denied in some cases.

  The firewall that runs on all three machines is AVG and there were no changes to the one last week, but I checked that sharing is allowed.

  I even tried to run the Configuration Wizard from the network on all computers to see if it works, but the same exact problems occur after doing this.

  I met this problem now THREE times. I can't believe that I'm the only one who has this problem and I can't believe that there isn't a solution for it. None of the Microsoft documentation has even a hint of a solution for this specific problem.

  I need a solution that closes completely the network at my church, and they cannot afford to buy printers and others for each of their computers.

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on A computer.
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Network access error: not enough server storage is available to process this command

  Hello
  I can't access the other computers on my network neighborhood.
  If I try to use \\computer\d$ running, I get "not enough server storage is available to process this command."

  I look in the case of newspapers and I have an error: "{the browser service has failed retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{97851F92-8FAC-4FB2-A6C9-CAB1B0FE6593}." The secondary Explorer stops. »

  I enjoyed all the ideas. I hope I don't have to reinstall the system (Windows Vista Business 32 bit)

  Dan

  I'm glad that you got this sorting. You were one of the rare cases where there was not enough space on a hard drive. Generally, the "not enough space" is misleading. In all cases, it is good to know things work now. Thank you for taking the time to let us know. MS - MVP - Elephant Boy computers - don't panic!

• Error when you try to connect to a shared network drive by car on the portable XP from VISTA desktop: "not enough server storage is available to process this command."

  Hello
  I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
  but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:

  "The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."

  Desktop is HP Pavilion a1410n
  Windows XP SP3 Home Professional 3 GB RAM
  Laptop is HP dv5z
  Windows Vista Edition Home Premium SP2 4 GB RAM

  I would like suggestions.
  Thank you very much.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Steve,

  Thanks a lot for the link to this article.
  It was most helpful.

  I also found this forum useful post:
  http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.html

  In particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
  I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
  On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.

  To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
  When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.

  He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.

  Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
  then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).

  I then went in regedit on the desktop in XP for the
  HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
  There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
  I rebooted and tried to connect but still got the same error.
  The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.

  So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.

  I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):

  http://support.Microsoft.com/kb/285089

  http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp

  I typed this all this while this might help others who may encounter this same
  Error "not enough server storage is available to process this command" when you try to
  Map a network drive (or just try to connect) to a XP computer from another computer.

  Thanks much for the lead.

• Some programs will not work for me as an administrator, but will work for other users on the same computer.

  Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.

  Did you run the System File Checker?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try Safe Mode (you have this problem in Mode safe?).

  315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCH

  If you cannot reproduce the errors in Mode safe see if you can further isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Create another user and see if they have the same problem as your current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

• Shared documents do not have this permission, contact system administrator

  Have a document saved on my desktop. I can access and edit on my laptop. However when I try to save it, I get a message like this. I get the message that I do not have this permission, contact system administrator

  How to take possession of an item in Vista. Works also under Windows 7
  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/ 

• Error: Static content was not deployed. Ask your system administrator

  One of my users gets the following error of static content was not deployed. Please ask your administrator to help system.
  
  Anyone had this before, or what someone knows what it is referencing. This happens whenever it runs a report and the report formats not correctly.
  
  At present, it seems that for him, but I don't think it's the control panel that she run Citrix and all other existing users on Citrix are not complaining.

  I,

  I saw him, it happens randomly to some users and nobody else, we have seen the year last a few weeks and then it stopped and restarted again in January then stopped again. Log a call with CC and give them this CR # 12 - 1QK0RRZ, the last update I have on it, it is "understand that this will require some changes to the code before its fixed. However, I am unable to provide you with a scheduled time of implementation at the moment. I will update you as soon as I hear more about this one. "but it was in March.

  2 things, is not happen in Firefox if it is an option for the user, AND we found if you connect to staging and then return to prod, he did disappear, don't ' don't ask me how or why, but it seemed to work for us.

  good luck ;-D
  Alex

• How can I get the original icon HP Quick Launch (NOT the shortcut!) on my DESKTOP?

  I have a HP 2000 t - 2d 00 Notebook PC with operating system Windows 8.1.  The computer was recently repaired, but when I bought it, it had initially provided with HP Quick Start icon (square blue tile - like appearance with the rocket / is NOT a shortcut with an arrow inside!)

  Once it has been repaired, the original official HP QuickStart icon was on the desk.

  However, something happened, I have no idea what (!), and the original official HP QuickStart icon disappeared from the desktop!

  I would be very happy if someone could tell me how to get the original icon HP Quick Start (blue tile in appearance as square with the rocket) on my desk.

  I don't want a shortcut; I know how to create a shortcut!  I am certainly difficult and would like to have some things on the desktop exactly the way they were when I came to the computer.

  Thank you very much to all those who can help me.

  You missed my questions in my first reply to your message!  The link you provided for the program that can get rid of the arrows on the desktop shortcut icons does not have audio, or am I missing something?

  And since you said I could try a system restore before that the icon has been "modified" - does this mean that the original icon, when I got the computer brand new, * has * indeed an icon for HP Quick Launch / is NOT a shortcut?

  Thank you.

  Great-tree Deku wrote:

  Hey @BJ22 ,

  Welcome to the HP Forums!

  I understand you are trying to add the quick launch of HP on the desktop of your laptop.

  The icons on the desktop for programs preinstalled by HP are actually shortcuts. The executable file can be moved from its installed location without breaking the connection to the .dll for the software files.

  If the arrow bothers you, you can use this light application to remove the arrows from shortcut icons: Windows shortcut arrow editor.

  You can also try to restore until the icon has been changed. Using Microsoft System Restore (Windows 8).

  I hope that it is a viable solution for you.

• EQ2 Station Launcher and EQ2 maps will launch not game fatal error comes up and stops the game activation...

  SOE EQ2 game will not launch! In addition, EQ2 maps will not launch... I had no problem until I upgraded to Window 7 Pro... I have a computer of video cards Radeon HD 4860 dual Quad Core, 64 bit...

  Problems of Troubleshooting program compatibility in Windows 7 Andre Da Costa http://adacosta.spaces.live.com | http://www.ActiveWin.com | Microsoft MVP