Layout print color or grayscale

Similar Questions

• How to change my default printer from color to grayscale permanently.

  How can I change my default printer of color in grayscale on a permanent basis.  Because for the most part, I print in black and white, I want this as the default value and then can change manually, if necessary, when I want to print in color.  Thank you

  Go to the ORB start and select devices and printers. Right-click on your printer, and then select Printing Options. Here, you should be able to select under gray color and save it...

• grayscale to offshore office 8600 pro won't print color

  A grayscale on for a couple of prints, but now off greyscaleis, 8600 pro office does not print color. A few color cartridges replaced lately. Also had to make a re-install because that wireless was not working

  Hi gbflater,

  I would like to allow you to print in color again. You print from a Mac or a Windows operating system and which version?

  While I wait for you, please use the following document, it can solve and no further action will be necessary. Printer cannot print black ink or color ink, or prints blank Pages.

  Fingers crossed!

• How can I export to PDF for printing Offset, including colors and grayscale of the photo?

  After reading dozens of forum, I not yet found the answer.

  I made a photo album with full-colur and b & w photos for Offset print. I want to be for the b & w grayscale avoid the hues of colors possible. It seems that InDesign does not support the shades of gray, how images become dark. Even with export without any conversion of color or the destination and/or including profiles of original colors, the images are exported to obscurity as a PDF to grayscale.

  
  

  How can I export to PDF for printing Offset, including colors and grayscale of the photo?

  Yes, Photoshop & ID CMYK working spaces are the same

  This can become difficult because 3 programs manage proofing differently.

  Work spaces don't matter, document profiles that handle the preview. So here's the same image in grayscale, placed in the ID on the top and PS on the bottom. I put my info in Photoshop to display the profile of doc in the lower left corner. I can see the profile of my InDesign CMYK Document in my test format (CMYK work is different and is not used). The two profiles are actually the same coated FOGRA39 (Black Ink FOGRA in the case of the PS).

  But the previews do not match because I disabled, so the preview InDesign is Gamma 2.2 or a "screen" media preview overprinting.

  

  If I turn on overprint preview, I get a match because I'm soft proofing for printing:

  

• Print images in grayscale with color covers

  I have an Illustrator CS5 document that uses placed images in grayscale on a white background. Everything seems on screen, but when I print the file a warm gray selection border appears around each image. I tried to use a Photoshop native files transparent, the EPS and TIFF files, but the problem persists. I am Mac OS 10.6.6. Everyone knows a similar problem and, if so, how do solve you?

  Thank you.

  Bob,

  If you save as PDF, buttons appear when you open the document in Acrobat/Reader to screen)? If this isn't the case, I think the question is outside of Illy and with the printer (pilot).

  Y at - he interpreted by the printer color management (pilot; you should be able to see under the ownership of the printer or something)? If so, try disabling it.

• DeskJet 5500 prints color cartridge 57 but your gray of the 58 photo color cartridge

  My deskjet 5550 is supposed to print color photo with the 58 cartridge inserted into the cartridge slot 2. It has suddenly stopped making and now print only the dull grey tone. I replaced the cartridge with a new one and got the same result. Print the same file using the 57 cartridge to slot 1 still gives the color. Replacing the driver produces no change. I'm on a Mac and I'm printing from iPhoto. Having checked that no filter is in use. Any ideas, what could be wrong and how to fix it?  Thank you.

  The cartrdiges 57 and 58 are necessary all to print the photo. The 57 a Cyan, Magenta and yellow. The 58A Photo Black, Light Magenta and Light Cyan. The printer can print photos with the 57 by itself, but the 58 by itself will not be able to print grayscale because there no yellow. In photo printing normal both cartridges are used together, the 57 provides vivid colors and the 58 provides subtle shades and black areas. When you print on plain paper 56 cartridge replaces the 58. The 56 was ink black pigment which is good for text but not used on photographic support. Regards, Bob Headrick, MS MVP printing and imaging

• turn off the photosmart print color 6525

  I use a Mac with OS X V.10.9.4 and have a PhotoSmart 6525. I can't seem to disable printing color for all documents, even when I select ' print black & white ' or ' grayscale print ' in the reference of the printer. It prints colors perfectly, but sometimes I want to just grey quick docs. I tried the HP utility, but could not find the opportunity to let me choose whether to print in color or black & white. I still want the parser must be able to scan in color, but the option for printing.

  Anyone know how to solve this apparently simple problem that me completely baffled?

  Thank you!

  Diana

  @diananmig

  AirPrint driver will allow you to choose the option to print in "black and white".

  

• HP Deskjet series 1510: printer color HP1510 (All In One) custom printed in color?

  I looked in the settings to print something in color. Grayscale is off, and the options of the printer says:

  Color: Yes I don't know how I'm supposed to deal with this :/ My color cartridge is almost full (it did print alignments of color) is not a technical problem, I think it's probably the settings...  Help, please

  Some applications (e.g. Chrome), has the ir printing parameters. What app you print from who has this problem?

• Canon MB2320 won't print color photos

  We have recently installed a printer Canon MB2320.  We use it for our printing needs, including the creation of brochures.  In general, the pamphlets are created in Powerpoint and will include the text color and image .jpg and .bmp files.  In printing, the color of text and elements (blocks or drawings) prints fine, but images may not print.  I tried simply print a picture file, a Powerpoint page with a .jpg and .bmp side by side on the page (to see if the file type makes a difference) and also a Word document with a .jpg file inserted.  In all cases, the printer behaves normally (spit an impression without errors) but all the image data seems to be ignored.  I can, however, print these same files in grayscale and printing photos, but obviously not in color.  All the "print previews" indicates color or grayscale according to what I have chosen.  I sent the same files to three different computers (all networked).

  As far as I know, I went on every setting that I can think of and everything seems in order.  The color ink levels are lower than black but will not give me any warnings yet.  Any help on this is greatly appreciated

  Thank you

  Hello.

  Troubleshooting with our support group will be necessary to narrow down the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help contact us.

• HP 8600 not print color

  I have a Hp 8600 and I recently changed the black cartridge, the others are setting up those and the printer does not print color more, since I have replaced the black print cartridge (not when I copy or a word in the document). I'm printing off grayscale isn't in printing preferences.

  Hello

  Thanks for providing the details.

  Please try the steps below...

  • on the printer screen, press Setup (wrench), then
  • Touch on TOOLS, then
  • touch the head of PRINTING its OWN.
  • Printer would print a test page, check if all the colors (Cyan Magenta yellow and black are printing).

  Now try to make a color copy and check if the colors are printed.

  If no colors? then its time to replace the cartrdiges Cyan Magenta and yellow.

  Ink level shown are those estimated, the actual level may be lower than what you see on the screen of the printer.

• Print color Officejet 7000

  How can I disable color printing on my printer Officejet 7000 wide format? I use Mac OS 10.6.8 99% of my printing requires only black and white.

  Terry

  Hi TerryP

  1. Start the application used to print print dialog box
  2. Click the box of the most recent selection, named as the Application (TextEdit for example) or Copies of Pages in MS Office
     You can spend the options settings by clicking on the arrow down near the name of the printer
  3. Select the paper / quality
  4. Spend down color Options
  5. Once the definition of the color to grayscale, an option use Black Ink only will appear

  You can save the configuration by clicking the predefined dialog box

  Make sure to use the color ink from time to time so that ink will not get not dry

• Hard drive... do not print color

  It's Photosmart 7510e printer all-in-one. Windows 8 operating.

  This printer will print color when I select something from the hard drive. photos of e.i., etc. - only print in grayscale.

  But when I select something in Internet Explorer, a web page, it prints in color.

  Y at - it somewhere that I might of been lacking the levels of grayscale instead of color?

  Thank you

  Newby-01

  Hello

  Please follow the steps below (click or button you use touch screen or mouse):

  • Hold down the key Win, then press Q.
  • HP type in the search box, it will give the list your printer
  • Click on the printer
  • Click on set preferences (top right)
  • Click Advanced (near bottom right)
  • "Print in grayscale" pick 1 of 3 depending on how you prefer (disabled for colors, shades of grey or black only...).
  • Click Ok/apply to come out.

  Kind regards.

• Management of the print color settings

  I've never had no problem printing from Photoshop on my Macbook Air, until I think I've accidentally pressed some keys on my keyboard which was obviously shortcuts.

  Now, whenever I try to print - the first image attached appears, as it usually happens with normal printing pre box, where you can choose the paper size, layout, color etc etc.

  
  

  I visited the print settings dialog box and everything seemed normal.

  I also went in Edition > settings of colors... but it was a bit out of my League that I don't know anything about the print & color management settings.

  
  

  If this is useful - I've also attached a screenshot of my current color settings.

  
  

  Can someone help me pleaseee - it drives me crazy!

  
  

  Thanks in advance!
  

  

  It is the normal print Photoshop dialog box. This must always come first. Access you the settings of the printer driver by clicking 'Print Settings '. It is also quite normal.

  Do not take into account the color settings dialog box, it is not relevant here.

  BTW, having the printer manage color is a somewhat safe setting, but you can usually get better results by letting Photoshop manage color and make the conversion to the desired printing profile. Then you will need to choose the right profile manually, and also make sure that the printer driver is set to the correct paper type. And the printer to support.

  In addition, the document profile is listed as "Display". This is the profile of Mac OS X will assign to the screenshots, but it is generally not a good idea to use the display as a document profile profile (both are different things and have different goals). Best to convert it to a standard such as sRGB profile if you intend to use the file to something else.

• My 6100 printer has never been able to print colors

  1 day he told me that the Blue cartridge (cyan) is empty, even when I replaced the cartridge with a new one, and he always says that the other colors are 'weak '. I've been printing the words black and white on a page, in fast draft mode, but the only time wherever I tried to print colors, she doesn't--a yellow cuff came out white, no colour at all.  He said always cyan is empty.  Now it will not print black and white at all. Am I supposed to spend $50 + new cartridges whenever I need to print something?

  Also, is there a Ribbon of cellophane that I need to take it off inside the printer?  I see a coating cellophance on transport of the cartridge in the printer, but there is nothing in the manual that says to remove it.

  Unable to print color seems a flaw for me.  Can I make a return?  I bought it two weeks ago.

  Catherine

  Hi CMBoston,

  I understand that you were not able to print anything in color, and you see a piece of Ribbon of cellophane inside. I want to help you with this.

  Please use the following document to solve the quality problem, you meet; Troubleshooting print quality problems.

  The strip inside the printer should be removed if the installation guide you requested otherwise, it is part of the internal mechanics.

  I'm not sure of the return policy where you bought the printer so I can not answer or not you can return the printer, but I can say that HP printers have a 1 year manufacturing warranty. If you're still having problems after following the steps outlined in the document, call HP. The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

  I hope that this information solves your request.

• HP deskjet 960C does not print color

  My printer goldie oldie suddenly decided to not print color since I plugged my new MacBook Pro.  When I used my old laptop from Apple, there is no problem.  I downloaded the driver (I hope that the right one) and replace the color cartridge.  What I am doing wrong?  Any ideas?

  WoooWhoo!

  I am happy to help and thank you for being a teacher. It's hard work, but so important.

  As the person who started this thread, you may have marked it solved by clicking to the right of your response, I think.