LEGO set

Similar Questions

• My LEGO is flat...

  attempt to create LEGO-dust or sort of LEGO explosion.

  The brick is made in one minute (see preview screen Center), but when I do the group a cell particle is "flat":

  

  Although 3D, looks like it turns only around an axis... (??)

  tried various settings - no hope.

  Someone at - it advice?

  Sorry, but the way that you set it to the top will not work.  The 3D groups used as source for the cell particles get flattened, it has always been thus.

  By example, if you have 3 circles separated on Z in a 3D group and create a transmitter out of this group, the source of the cells still gets flattened, you don't actually have a particle composed of 3 circles of offset. You get a particle of cells that are flat, but the transmitter can project them in 3D space. For text 3D, if you use the object text 3D (single layer) as the source it will provide no flattened in the transmitter.

  That said, there is an "easy way" to do this and hard a way. First of all easy:

  1. set up your "Trade marked building block" in a group and Center it in the group.

  2 animate the rotation on two of the chains of the Group (X / Y for example).  I used the behavior of rate with slightly different values.

  3 export this output as a movie, and then import it into the movement.

  4. use the film as the source of the issuer. Make sure that the random boot image is checked in the settings of the transmitter.

  -You may need to adjust the rotation speed. I used this method to create particles of blood cells in the past and it worked fine.

  Pros: Simple configuration works in most cases. Faster and better performance.

  Disadvantages: Not true 3D, you must perform a new rendering of the sources of the cell if you need to change the items.

  90% of the time that this method will be good enough.

  Here's the hard, but it has limits (I'll get to those).

  1. in a new group, create your basic "box" using text in 3D. Using the commands to set layer transformation origin (Center of the world) on XYZ, is visually very well.

  2. based on the Properties tab, move the anchor point for the box originally as well. Check the position of the top, front and one side. You can reduce the opacity to see the grid in 3D.

  3. now, create a new text layer object to be the 'peg '.

  4. use the rotation settings in the appearance tab text to get the ankle facing the correct direction, associated with the box.

  5. move the layer 'peg' in the right position related to the area using the 3D transformation controls.

  6. once in place, select the layer and again move the anchor point toward the center of the world.

  You have now two objects which will have all created transformations effectively from the same point. The shared location of anchor is essential to make it work.

  7. Select the first box and create a 3D with that issuer.

  8 copy the random start in the control of the cell value. You will need it for each post.

  9. drag the layer peg on the transmitter, which will create a new cell.

  10. glue the random seed value in the box, the cell in peg.

  Here is where I would test the basic settings.

  IMPORTANT: THE VALUES IN CELL OR CHANGES NECESSARY TO EVERY CELL AND MATCH FOR ALL THE CELLS IN THE TRANSMITTER.

  For each cell in the change in the rate of birth to something low (I used 2) so you can see what is happening.  Reading and verification of the animation. If everything is configured correctly (original anchor point points are at 0,0,0 in the values of the world, random seed for the match of cells) that you will have the pegs that stick to the boxes.  If things don't stick you probalby have problems with the anchor positions (they do not match) or values of cells.

  Once you have set up the first peg and know that it works, you can add extra pegs by using the previous steps.  Then check that the anchors are centred and correspond to cell values. for each cell in the transmitter.

  So here are the limits.

  • Easy to break delicate installation (but not too bad).
  • If you wish the transmitter to turn cells, they will turn only on a single axis (z).  You can work around that, by linking the rigging the rotation of text object layer together values and then animate these on another axis, as Y.  However, this will affect all cells in the transmitter, so things a still fairly uniform.  To work around this problem, you can duplicate the text layers, create an another particle emitter with a few shifts (birth rate, direction of rotation, speed). When played together, they will look more random.

  Again, the most important thing to get this second method works is paired things (anchor points, the layer changes, cell parameters). Knowledge of the rigging/link can help.  FWIW, this configuration can also be much more intensive treatment depending on the purpose of text how he takes and create the number of particles, your mileage may vary (this is why there is the easy way).

  Good luck!

• Lego Mindstorms silent installation

  Hello!

  I want silent install edition teacher of Lego Mindstorms Education EV3. But I can't make it work.

  I use the command line: setup.exe having/q /acceptlicenses Yes/r: n

  I used this credit:

  ; --------------------------  How to use this file  ---------------------------------
  ;
  ; To run this installer in silent mode:
  ; 1 change the information below to match your company's information and the installation location.
  ; 2 run: setup.exe /q /AcceptLicenses Yes. Passing the value 'yes '.
  ;    the /AcceptLicenses parameter indicates that you accept the license agreements.
  ;    Alternatively, instead of / q, / QB can be used to run the installer in basic UI mode.
  ; 3. the installation program will automatically restart your system after the installation is complete.
  ;    To prevent the restart using the command line: setup.exe /r: n/q /AcceptLicenses Yes
  ;
  ; For more information on the automation of the installation visit www.ni.com/info and enter the code exdir3 info.

  ; --------------------------  Set feature states  ---------------------------------
  ;    Valid service States are: local, Absent, NoChange, default
  ;    Local - install (on the local hard drive). If already installed leave that he installed.
  ;    Absent - do not install it. If already installed uninstall it.
  ;    NoChange - do not install it. If already installed, leave it installed.
  ;    Default value is equivalent to not register the function in this file. The feature follows its default behavior.
  ;    To install EV3 in student mode, delete the "EV3_EDU_Mode" parameter on line 24 by removing the entire line.

  [Features]
  LEGO_EV3_EDU_Feature.ev3.edu.100 =
  EV3_EDU_Mode.ev3.edu.mode.100 =

  ; -All install directories-
  ; To use the default paths, remove the following section *.

  [Directories]
  LEGO_EV3_EDU_Feature.ev3.edu.100 =

  ; -Set the parameters of the General installation-
  [InstallationType]
  ; uncomment one of the following lines for student vs. teacher install
  DefaultRadioButton = TeacherInstall
  DefaultRadioButton = StudentInstall

  If I add = Local to the syntaxes features, that it returns an error when you attempt to install, saying that it is an incorrect syntax.

  When I install silent with equity, Lego Mindstorm installs students edition.

  If I try to create a new credit memo with /generatespecfile setup.exe, the installation process hangs.

  So what I am doing wrong?

  Apparently this depends on the version you are trying to install, you must therefore take account of this version in the features section.  For example, I was trying to install version 1.2.1 today and it did not work until I did the following:

  LEGO_EV3_EDU_Feature.ev3.edu.100 = local
  EV3_EDU_Mode.ev3.edu.mode.100 = local

  changed to

  LEGO_EV3_EDU_Feature.ev3.edu.121 = local
  EV3_EDU_Mode.ev3.edu.mode.121 = local

  And the installation in silent mode now works correctly.

• just the job for DB set to true

  Hello

  I did VI this post to a MySQL DB when you press the touch button of Lego NXT on port 1, but right now, it display the States True and False, and I only need the true statements.

  I can't find a VI that only returns True and sends to the DB connection and just throw the fake.

  Is it possible somehow, (it must be possible)?

  Zaico wrote:

  Heres my VI

  But with a structure of the case, I have to set the real time output and false, I just can't seem to throw false and use only true... but it's maybe just me?

  Can you take a look at my VI and see if it's just me?

  Thank you

  You do not use a case structure in your VI.  You used a select statement.

  Please, start the tutorials.  A case structure is this notion important fundamental and in LabVIEW that if you're not familiar with it, then you are a long way away from being able to do the same programming LabVIEW base.

  You would put the DB tools insert given Subvi in the case of true value.  You would put nothing on the case of false except the son reference and error wiring connection in.

  You don't want to put the connection open and tied inside the while loop.  Put the front opening and close error.  It's a waste of resources continually open and close each iteration of the while loop the same connection.

  You probably also need a timer waiting inside the while loop.  Unless there is something in the Subvi that control the speed of execution of the while loop, you will use this loop at such a fast speed and it consumes 100% of the time CPU.  This is going to hurt the functioning of your VI and perhaps the entire operation of your PC.

• 64-bit LEGO Mindstorms NXT pilot

  During the installation of the driver 64 bits for Lego Mindstorms NXT, it stops and I get the following message. "Installation ended prematurely because of an error". Has anyone else had this issue and know a solution.

  Hi Mark Janovetz

  ·         I suggest all the previous version of the drivers associated with the program and then try to install and check if it helps.

  ·         You can even try to install the driver to boot. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Steps to perform the clean boot and check if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the Load Startup items check box.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  VI. click OK.

  VII. When you are prompted, click restart.

  VIII. after starting the computer, try to install and check.

  See link below: http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click restart.

  Link for more information please refer to: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lock the coordinates or set open coordinates

  I would like a way to keep the location/contact information on the page set when scrolling between pages or opening a document while zoomed in. For example, I have several documents of several pages where I need to display information in the lower right of the pages. I need a way to open the document zoom in on this area and keep it in mind when you go to the next page. If there is a way to do or add-in available please let me know.

  Here is the code that you can copy and paste into a text editor. Save the text file with an extension of .js file and copy it in the JavaScript file that you determined by the instructions provided above. The code creates two new points in the palette "tools > tools module. You right-click on each and select 'Add to quick toolbar tools' to make them more easily accessible. They have only the default icon, so they look like Lego pieces, but you can change it if you wish, it is not as easy at it. You can also add them to a custom toolset that you create in Acrobat 11.

  app.addToolButton({)

  cName: "ZoomScrollLowerRight."

  cLabel: "ZoomScroll_LR."

  cExec: 'ZoomScroll_LR (this, this.pageNum);',

  cEnable: ' event.rc = app.doc; "

  cTooltext: "Zoom on bottom right.

  });

  app.addToolButton({)

  cName: "ZoomScrollLowerRightNextPage."

  cLabel: "ZoomScroll_LRNP."

  cExec: 'ZoomScroll_LR (this, this.pageNum + 1);',

  cEnable: ' event.rc = app.doc; "

  cTooltext: 'Zoom down to the right, next page'

  });

  var ZoomScroll_LR = function (doc, page_num) {}

  Set the desired zoom value

  var zoom_value = 100;

  Go to the specified page

  but do not try to pass the last page

  doc.pageNum page_num = > doc.numPages - 1? doc.numPages - 1: page_num;

  Get the size of the current page

  var PDB = doc.getPageBox ({nPage: doc.pageNum});

  Set the zoom

  doc. Zoom = zoom_value;

  Scroll to the bottom right of the page

  doc. Scroll (PDB [2], 0);

  };

• iPhone 6s more 'Phone noise cancelling' setting Grayed Out

  I have a 6 more than 128 GB iPhone running iOS 10.0.2. I can't activate the 'Phone noise cancelling' setting in settings > general > accessibility > telephone noise cancelling because it is grayed out. I have attached a screenshot for reference.

  I've tried hard restart my iPhone (Home + Power button) without success. Any help is very appreciated! Thank you.

  

  Hey there, Stephen Bond,.

  Thank you for using communities of support from Apple! I see from your post that your iPhone more 6s on iOS 10.0.2 does not work as expected because the cancellation of noise from phone toggle is grayed out. I'll be happy to help you.

  First check to see if the hearing aid Mode is enabled in settings > general > accessibility > hearing aids. If this option is enabled, then telephone noise cancelling will be grayed out as you describe. If this isn't the case and that the option is grayed out, please continue.

  How to back up your iPhone, iPad and iPod touch - please backup your iPhone to ensure that your personal information is safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - this process will completely erase the iPhone to allow a new copy of the iOS to install. The first time, select "set up as a new iPhone. Once your iPhone is back to the home screen, check the setting of the new. If everything works as it should, use the "restore from backup" link in the section «Get help» If it is not, under the same article, "Contact Apple Support".

  Take care and have a great day!

• Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Settings > display and brightness > raise to Wake

• I am trying to set up my new iPhone 7 more but it says SIM necessary?

  Im trying to set up my new iPhone Plus 7 but it says "SIM" required?

  You must use a sim card to activate the iPhone.

  Don't you have a?

  Where did you buy this iPhone?

  Has not chosen a carrier when you purchase it?

  Don't you have a cellular carrier that you want to use iPhone with?

• power of Attorney of iOS 10 setting does not save

  Hello

  I'm having a problem with the proxy settings in iOS 10.0.2

  It was working fine before the upgrade, but I've been on the vocation and when I return to work I could not wifi configuration to use the proxy.

  I put it on manual and whenever I entered my (proxy, port, and authentication) setting it back to off.

  Is anyone else having the same problem?

  anyone?

• Cannot set the time on the lock screen in iOS 10

  I guess that's a stupid question, but that's.

  I've just updated to iOS 10 days previously.

  Previously, I had my iPhone value never expire and go to the lock screen. I prefer to leave the phone on until I'm ready to turn it off.

  After the iOS upgrade, the screen starts to weaken after a minute or two and if I don't hit the button or other it turns itself off.

  So I have to waste time, it opens by pressing the button Home, inputing my 4 digit code and have spent the necessary iCloud screen - I don't do iCloud.

  Looks like that I used to go into the settings > passcode lock > and there was a framework for '' never. '' Placing it now longer available is 4 hours, which is what I now have it together, but it is still greys out and hangs and then after about 1 minute.

  Is this a bug or I do something wrong?

  The setting has been moved to iOS 10. He is now in settings/display and brightness.

• How to set an alarm on my watch unless it is also put on my iPhone?

  I have a Apple Watch (series 2) and an iPhone 6, two running the most recent versions of the OS. I put an alarm on my watch and when it fires, it is also an alarm on my iPhone. I just want to turn off the alarm on my watch and I want to shut up my iPhone.

  How can I do this?

  If you set an alarm on the watch itself, and he made his appearance in the list of alarms on the phone? Or is it just by alerting you on the phone?

  From this page of the User Guide Apple Watch, http://help.apple.com/watch/#/apd27ce65478 , that it would work on the other hand, but an alarm on the Watch not push to the iPhone or the alert on the iPhone. I just tested this on my watch during the drafting of this response and an alarm on my watch was not on the phone or the alert on the phone. Is it possible that you did not create a new alarm, but rather edited a?  Sorry, is not of importance, like all of the alarms on the phone doesn't actually appear on the watch, only the alert is pushed to the watch.

• I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  Hello Dulceallison,

  Please ask questions on iCloud and photos after the iOS 10 update here in Apple Support communities. We don't like hearing about questions after each update or upgrade. I am pleased to offer you some things to check to help you with your photos are blurred and alerts that you have received with iCloud.

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, we need to verify your configuration and ensure iCloud library is enabled and check if you are using the storage optimization feature. Please open this help link: iCloud photo library. There is a section on titled mid-race "save space on the device. He talks about the storage settings optimize. When this option is enabled, you will get in their original, high-resolution images of resolution lower, while iCloud library keeps all your photos and videos. You can check and see what images are stored in iCloud by clicking on this link: icloud.com, sign in using the same Apple ID that is connected on your iPhone. Click on the Photos. If you use iCloud photo library, you will be able to see all your photos. Upstairs in the Center, it allows you to see Moments or Albums, and if you scroll all the way down it will tell you how many photos and videos that you have. Also, some scroll down and try to check a few who appear fuzzy on your iPhone. Icloud.com are also blurred it?

  If you use iCloud photo library, and even if you see lower resolution versions of the photos on your iPhone, they should not be blurred. Make sure that you have made a backup and then please go to settings > iCloud on your iPhone. Turn off the photo library iCloud, wait a minute or two and then turn it back on. It should be re - synchronize your iPhone with iCloud. Check if the images are still unclear. If they are, please fully sign off iCloud on your iPhone. There are options to save contacts on the iPhone, and other documents and other will be deleted form the unit. Don't worry, this information is recorded with iCloud and also saved in the backup. Once all signed, restart your iPhone. This article will help you if you need the steps to restart the appliance: restart your iPad, iPhone or iPod touch. Once the device powers turn it back on, go ahead and return to the settings > iCloud. Sign in with the same Apple ID that was signed previously. It may take a few minutes to return all documents, data, photos, contacts, and calendars, but once this is done, go ahead and check your photos. They match the icloud.com images? Are they accuse still blurry on your iPhone only? See if you can isolate a specific set of images, or if all the photos on the iPhone are blurred.

  I hope that steps with deactivation and activation of photos in iCloud or logout and back in iCloud has resolved the issue, but if not, please provide the information for the steps that we have achieved together so far and I'll be more than happy to continue checking of other options to get this working as expected with you. Thanks again and have a great rest of your day.

• should I "set up as new iphone."

  Hello

  I didn't save my 6s IPhone since I got it and I don't know whether to "set up as new iPhone" or "restore from this backup" (my old iPhone 5).

  I'm afraid that if I "set up as new Iphone" I will lose all my photos my camera etc. For more than 30 weeks I had this 6 s IPhone and I have over 3000 photos.

  Please let me know which option to choose. -I don't mind if photos from my old phone to the folder/location same as pictures of my new phone as long as I do not lose them!

  Thank you

  Holly

  Hello

  When you load an iphone it should automatically be saved on iCloud

  Go to the last backup of settings-iCloud check if it's not very old use that one

  When you set iPhone it will ask you if you want to use backup say yes, if its a recent.

  See you soon

  Brian

• set up a branch to the main ethernet using Airport Extreme network

  Could someone help me with this network configuration please?

  I rent an office and we have an ethernet cable coming into our building to the main network (a fiber broadband building next door). The ethernet line give you IP addresses and internet link.

  I would like to set up our own network in our building-

  1 / would put an Airport Extreme there is the ethernet cable and then plug the cable into the WAN port

  2 / I would implement the EA to distribute IP addresses, but using a different pool - so if the main building uses 192.168.1.1 to 192.168.1.256, I would be created my AE to use 10.1.1.1 to 10.1.1.256

  3 / I would then run an ethernet cable between the port LAN on EI to my Netgear 24 port switch.

  4 / I would connect all our other airport extreme and express again our Ethernet switch and put them all to 'bridge mode '. The switch ethernet cables may be connected to the WAN ports on these airports.

  Anyone see any problem here? We would just to have control over our own IP addresses and be able to restart our Airport Extreme, if we must, do not rely on the building next door to the distribution of intellectual property. I know still need to answer on them for the internet connection, but that's fine.

  Thank you!

  It should work. It would be the basis of a network of mobile type.

  A word of caution. With the exception of the "main" AirPort Extreme that performs as a router, connect the other base stations using their respective ports of LAN. We found some inconsistencies when a base station is in bridge mode and the connection is their WAN port.