Shaw and my new Linksys WRT310N router

Similar Questions

• I'm unable to set up my new Linksys E1000 router to my computer dell Inspiron B130 laptop.

  When you try to configure my linksys E1000 new router I get... We can not define your... router wireless connection requires Wi - Fi connection are managed by microsoft windows.  some computers have a different wireless connections Manager... I tried to disable my dell 1470 wireless unsuccessfully lan card to get the new router loaded... any suggestions?

  Hi Devar,

  When you configure a new Wifi router immediately, you can connect to the radio

  you have to go on the wireless router and you also need an ethernet cable to connect the router to your pc wirelessly

  normally all routers come with an installation cd. But if it does not

  Open your web browser and type the ip address of the default gateway

  The IP address of the Linksys routers is 192.168.1.1

  from there, you can set the security features and everything and after that you have set up passwords and everything please connect your modem to the wireless router so that you can access the internet

  to manage your network wirelessly with the windows wireless client, please activate your Automatic Configuration WZC wireless

  follow these steps to activate the automatic Wireless Configuration

  Start menu - click on RUN

  type in SERVICES. Scroll down the list until you see SMC Wireless Auto Configuration

  Double-click and should be in service type: automatic

  and also, click Start to start the service.

  Hope that helps

• Configuring router user name and password for Linksys WRT120N router?

  Im trying to forward my ports for games, but I can't access my router. I put the usernam admin and leave the password empty vice versa and user name password and username password vice versa. This is a new router and this is my first time trying to access.

  Thank you

  Well, it was an old password for quite awhile ago. I didn't know that he will use an old previous routers. ??? Weird. Well, I want to change the password and the user. where should I do all here?

• Inspiron 8600 and an adapter Intel wireless & new Linksys router

  We recently bought a Linksys Wireless G router and my Inspiron worked very well.  Randomly, he stopped yesterday connecting to our network.  I have the excellent or good signal strength.  When I run the repair feature, the limited or no connectivity message appears. My IP address may not be renewed.  I tried scanning all available networks, and my computer 'sees the router' but when I chose connect nothing changes.  Is my adapter wireless misfunctioning or broken or is there something else I should do.

  
  

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• Linksys wireless router is not my new Motorola modem Internet access

  I am relatively new to setting up home networks, so it's maybe a stupid question but I'm stuck! I bought a new modem Motorola (SurfBoard 1621) as my old Motorola modem was not favorable to the increase of the speed offered by Comcast. The modem I bought was a model recommended by their web site. They recorded the new modem last night and I can access the Internet when the PC is connected directly to the modem, but not when the laptop is connected to my Linksys wireless router. (Sorry, I don't know the model because it is at home and I'm at work!) Is there something I should do for the router to recognize the new modem? The router recognizes the wireless laptop, but it can not connect to the Internet.

  Thanks a lot in advance for your help.

  Success! Thanks a lot for your answer. My router is a WRT - 54G links.

  The instructions were very informative, although I have a suggestion. Just restart the modem and the router did not work. I had to reboot other equipment in my system (a NetGear firewall and a level switch 5 ports) and the router and the modem. I would like to see the reboot of reference tracking "and other devices. I guessed the appropriate power of sequence (modem, firewall, switch, router, computer), and fortunately, it worked.

  Again, thank you for your quick response.

• I have a belkin n1 vision router and a new printer all-in-one hp Office pro 8500 has, but the

  I have a Belkin N1 Vision router and a new HP Office Pro 8500 all-in-one printer (HPA7864C), but the wireless connect. I followed the instructions of the printer, but the better report reports that "MAC filtering" is enabled to possbly (or on) on the wireless router. I checked the router, but the "MAC filtering" is set to off (or off). What could be the issue that the printer will not connect to the wireless router?

  Best report:

  Without thread - OK

  Functions without wire - OK

  Network name (SSID) has been found - OK

  Security - OK

  Print settings are OK with the settings of the router - OK

  Unfiltered - NOT OKand then it stops!

  Connection - do not run.

  Problem was solved by changing the channel 6 to 11 of the channel on the Belkin N1 router.

• connection printer MG7520 problems with password, and the new name of the router

  I had to change my router network name and the password (the actual router is the same, but the network name and password is different). Now my Canon MG7520 won't 'talk' to my lap top, room rvia wired or wireless LAN (that worked before). My guess is that I need to "tell" the printer name and the password are different, but I know dn't how.  I tried to download the software and run it (that is to say, all over again) but when I do I get an "unable to acquire information on the driver and software.

  Any suggestions?

  Hi sdwhite,

  Yo are quite right that any time changes to network configuration, the printer must be given new items.  The printer can be connected directly from the operations Panel, and I have included full instructions HERE.

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

  This has answered your question? Please click on the button accept as Solution so that others may find the answer as well.

• Problem with printing with new Wi - Fi router and 7410

  My HP 7410 print perfectly with my old router - but who died.  Today, I installed a new Netgear N750 with WPA2 security.  I finally had to downgrade times the speed and the performance of the router and other equipment for the HP7410 could recognize the network under WEP security.  However, now it does not print, even though it recognizes the network.  How can I resolve this short of buying a new printer?

  OK, let's try the following: setting up press façade 7410, 8, 1, 1 to print a network configuration page (you have probably this).  Look at line 3 and put this IP address in the browser of your computer.  This loads the page 7410's built-in web server?  If this isn't the case, then your computer Windows 7 Click Start, type cmd in the search box.  When cmd.exe will appear in the results do a right-click on it and choose "Run as Administrator" and give permission.  Once the administrator command window opens click in the box and type

  IPCONFIG

  It lists the IP address of your computer.  Compare this with the IP address of the printer.  They should be the same for the first three sets of numbers, for example 192.168.1.11 and 192.168.1.3.  If the first series of numbers are not the same the printer and the computer are not correctly on the same network.  (This can happen if the printer is not picking up an IP of your router, or in some cases correctly when it receives an IP address from another router, maybe a neighbor.)

• Linksys 8-port befsr81b and CR-smcd3g cable/dsl router

  Hello

  WAN port on my linksys befsr81b router is connected to comcast cable modem smcd3g-ccr, all the cable modem ports are in auto mode and when I connect to the cable modem it shows 10 Mbps, half-duplex, for this linksys router port is connected to.

  When I connect a PC to the same port on the modem using the same wiring, I get 1000Mbps, full duplex.

  He tells me that the router and modem cable have difficulties at ports the correct port mode. When I change from auto to 100 Mbit/s, two-way, cable modem, the router disconnects and the link light for the modem port shuts.

  I use the version of the firmware 2.45.10, June 3, 2004, on linksys router, which seems to be the latest firmware for befsr81b.

  Can someone tell me what could be wrong with my router or its settings?

  Thank you

  digimonx

  It will not work. The WAN port on the BEFSR81B working on 10Mbps.

• I have a desktop with windows 7 and a linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  Yes, it should work perfectly, if wired (Ethernet) or wireless.

  Click on the network icon in the Notification area

  Click on the available wireless network that you want to connect

  In the list of available wireless networks, click a network, and then click on connect.

  Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.

• Question re: Atheros AR5007 802. 11 b / g adapter and connection w/Linksys E2000 wireless router

  Help! I'm at my wit's end. I just bought a Linksys E2000 router and cannot find a way to get the router to connect wireless on my HP G60-235DX laptop (running Vista) via the WPA2 setting. I know that the Atheros AR5007 802. 11 b / g wifi adapter is the question, and I downloaded the latest driver update... and still have the same problems.

  FYI - I can connect to the computer via the internet cable from the Linksys E2000 router so I know that it is not a modem issue.

  Help... PLEASE, I BEG YOU!

  Thank you, thank you, thank you...

  Paul,

  I solved the problem! After almost return the router to Best Buy today during lunch, I decided to give it a try more tonight and again call LinkSys. After almost decided with the Linksys officer that they only solution is to put another card in my computer, we stumbled on the question.

  We have gone to 5.0 GHz to 2.4 and spent the 'auto' channel to channel 9.

  And now my computer works like a charm (thanks also to update the driver as you instructed).

  Thank you!

• Establishing a new pw for router

  I have a linksys wrt54g router that my brother put in place years ago.  Unfortunately, he is unable to remember the password of the router, and I came out of my own personal network.  I can't reset the password, by going into management services by typing my ip address (it is said he is recorded, however it does not record) and my brother sent me a dl from linksys to set up a new account, but it keeps telling me that my wireless is not on when it is.  Can anyone help me please with this.  Thanks for your time!

  Opening of session in the page of the router by typing 192.168.1.1 in the address bar... Keep the SSID Broadcast enable and click on save settings on the tab Wireless, change the SSID (Network Name) to a unique name, change the channel 11-2 wireless, 462 GHz... In respect of wireless security, enable security... If you use WEP then, note the Key1 as the network security key... Now, try to locate the network on the wireless computer wireless and connect it using the correct security key... Security key is case-sensitive.

• My Y510 does not recognize my new Linksys WPC600 Wireless-n laptop notebook adapter

  Product information

  I put in the card and that it snaps, but he seems safe in there. It can easily be removed. He feels like he doesn't have all the adapter. When I insert it, Vista doesn't recognize or recognize it. The Y510 accepts only a certain type of network card? Because the click of 'plateau' looks strange and unique.

  The card definitely fine functions because I tried on a Dell laptop and it recognizes the card immediately.

  Do I have to download a certain driver for my Y510 to recognize the Linksys adapter PC laptop?

  Thank you!

  This card is the PC card.

  IdeaPads and other new laptops use Express Card.

  They are incompatible.

• 2 PC XP and a new Windows 7 pc + 1 Hub Intena - how to connect to a wireless network?

  I have 2 PC with Windows XP and a new one running Windows 7, but unable to connect them so that they run all on a home network. Connection Internet is via a hub Intena broadband.

  One of the XP PC can not even connect to the internet.

  What should do? Any help is appreciated...

  PDW

  Hello

  To check the PC that cannot access the Internet read this page, http://www.ezlan.net/wireless.html

  ------------------------
  Sharing.

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.