Light, next to the stack of DVDs orange blink?

Similar Questions

• FaceTime Camera: the green light next to the camera makes a slow blink, and there is no picture

  MacBook (retina, 12 inch, early 2015) El Capitan 10.11.5 now ongoing enforcement.

  Whenever I try to access the camera FaceTime (FaceTime, Photo Booth Apps) the green light next to the camera made a slow blink, and there is no picture.

  The system report > camera > model ID: Apple camera VendorID_0x106B ProductID_0x1570

  The numbers of the vendor and the product are correct?

  The camera worked for 6 months passed and I used FaceTime several times without problem.  Several users are affected.

  None of the recent changes to the system.

  Since the problem began, I have:

  (1) installed Skype to see if one application other than an Apple app had a camera problem. Skype has no camera or.

  (2) improved 10.10.4 to El Capitan Yosemite.  Hoping that the upgrade would reload the application Face Time.   No change in symptoms

  (3) reinstalled the El Capitan using the OS X Internet recovery.  I have not used the time Machine.

  (Note for everyone, it was simple and painless and does not need to reinstall applications.)  I want to reinstall MS OS was too simple)

  (4) several other threads suggested to reset NVRAM and SMC memory, even if they do not seem to be associated with the prob. who - without success here tried either

  Any advice to determine whether it is hardware or software?  Still dig while you wait for a response.

  Note: This problem is not resolved

  Also, over How to troubleshoot the iSight - Apple Support .  Any assistance to the problem.

• When I turn on my laptop, only the light next to the button Cap Loc flashes.

  Model G61 - 408 CA

  Windows 7 operating system.

  In the last session before the problem occurred online, I noticed the operations were very slow.  I checked the speed of the internet and it was good.  I tried to reboot several times but nothing comes of usual noises from the machine to report that she has been commissioning.  Only LED the arrow next to the button CapLoc and another light next to the Altec Lansing logo at the top right of the machine kept flashing.  Nothing else happened after 15 minutes.  Pushed the power button to close.

  Tried again a few days later.  Still nothing.

  Hello

  Yes, I would say you are right and it would certainly be my first not to replace what looks like a defective module.

  Kind regards

  DP - K

• Blue light next to the PSC 2400 cartridge

  I wonder because I can't find anywhere in the documentation.

  I have a PSC 2400 (no network capabilities).

  Next to the cartridge is a little blue light which is still active. You can see it on paper when it prints, and you can even see when opening the printer (for example, paper, stuck or when replacing the cartridges).

  I wonder what 'blue' light is... Why is that?

  It is inside the printer, next to the cartridge and moves with the cartridge. It is not an indicator of some sort.

  Thank you!

  It's an old printer, but that the light operates as a sensor. Function of the printer, it helps with the process of alignment and remote sensing possibly different types of media/paper.

• How can I turn on the light next to the camera on the X 301-resolu

  Solved

  Function of the keys (Fn) + Page up

  Toggle

• Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

  Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

  If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

  Think I'll get a laptop samsung...

  Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

• HP Jet 11-r010nr: stream hp 11 does not startup, the led next to the button / stop is on

  I have a friend who brought me their 11 2 weeks older HP flow because all day yesterday they tried to restart the laptop and may not have to start at all.  I tried the famous hard reset by holding down the power button for 8-10 seconds of course which is suggested (I have it pressed for a good 40-50 seconds).  I also now tried the power button and the mute for 40-50 seconds.  No luck.

  Unfortunately, the battery is good behaviour and because he is still under the manufacturer's warranty, I can't remove the back and turn off the battery in this way.  (Can I ask what is the point to make the inaccessible battery that the mere fact that you earn more money by forcing people to return the product to HP to avoid the cancellation of the warranty?  Apple does it too well, please do not follow their trend!  I love HP, but this is going to force me to buy elsewhere!)

  Can someone help me or point me in the right direction to help with this?

  The light next to the power button is on and the light on the projection side, it is turned is on but the screen is black with no cursor.  It has been unplugged for 3 hours in the hope, the battery is going to die and I can get somewhere with him but I'm not sure how close it is exactly to be dead.

  She becomes very frustrated by that and I don't blame him.  She's at the point where she will return it and switch sellers totally if it can't be fixed.

  The battery is eventually died.  I plugged in the charger and Windows restarted without problems.  Research in the logs to see what happened, I noticed that it didn't have an update for Windows 10.

  My guess is for some reason any it failed but the laptop supposed it was finished, restart it it basically says "wait, what am I I loading?" and froze.

  Needless to say, I downloaded the update from Windows 10 and installed successfully.  I restarted the laptop and now everything is fine!

• I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility? The Express flashes an orange light.

  I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility?

  The Express flashes an orange light.

  I tried to reset to factory by using a paperclip for a little more than 10 seconds (green LED flashes).

  The Express flashes a light - orange after the reboot - that seems normal to me.

  I use an iPad or MacBook Pro (without port cat 5) set up.

  I would like to extend my WiFi network and stream of music with it.

  Read the manual and did some research but I'm stuck.

  Thank you for taking the time to help...

  NOTE: I also have a second generation version which works very well.

  Let us first make sure that you really have a 1st Gen AirPort Express. To do this, look for the model number on the side of the Express. It is difficult to see, with grey lettering on a white background, but the number starts model with an 'A' followed by four digits.

  You do not want to see A1264... not A1084 and A1088.

  Share your findings.

• The Previous/Next buttons are stacked in HTML

  Although the buttons Previous/Next to the Composition on this page are to the left and right in Muse, in all browsers stacked on each other on the left side.

  Here's how they appear in - Muse

  

  Here is the link to the download site-

  Homepage

  Curiously, I created a new Composition in duplicate on a separate page, and the buttons worked properly, so I just copied this slider to my homepage.

  Thanks for the reply!

• Dashboard orange next to the brand of sequence

  What is the purpose of this little orange dashboard next to the brand of sequence in the timeline editing?  It seems to create this small cut at the end of some of the clips whenever I have insert another element that is barely visible, unless you approach.  Small cup is about the same size as the orange line, so I guess that there is a correlation.  What is its role, and how can I get rid of him?

  

  Hi Realjonwu,

  realjonwu wrote:

  What is the purpose of this little orange dashboard next to the brand of sequence in the timeline editing?  It seems to create this small cut at the end of some of the clips whenever I have insert another element that is barely visible, unless you approach.  Small cup is about the same size as the orange line, so I guess that there is a correlation.  What is its role, and how can I get rid of him?

  In fact, you can view the playhead to a very close-up view. You cannot "get rid" of him because that's the way it is designed. You have all just never noticed because you can't have zoomed in and noticed up to that earlier.

  Here's how I describe it: the reading head itself represents the entire frame. The leading edge of the read head marks the beginning of a single image. The right edge of the playhead indicates the end of the same frame.

  It is good that you have noticed that you should be careful when you use the read head to mark an out point. If you do, you cut an additional frame you do a crash edit. If you use the playhead to mark an out point, don't forget to go on the left of an image before marking allowing the head to end reading (or orange little dash, as you said).

  Final Cut Pro 7 and earlier versions also has this problem with Avid Media Composer. Media Composer has this cool feature where, if you move your playhead to Out point add a keyboard modifier, it will break the point at the leading edge of the playhead, an end of the reading head (small dashboard orange) no output. If this seems like a good idea, please request a feature: http://adobe.ly/feature_request

  If you need to score inside and outside for a clip, a better route is to use the Clip of Mark. Defines the in and out of the points at the appropriate places.

  There are a lot of editors out there who is self-taught and never get to hear this notice or explanation. I hope that helps you never cut a stray frame, because you is drawn using the "little dash orange."

  Kind regards

  Kevin

• When I click on the tab with a + on it, located next to the current tab, a new page does not open. If I click on 'New tab' in the file menu, a new tab do not ope

  When I click on the tab with a + on it, located next to the current tab, a new page does not open. If I click on 'New tab' in the file menu, a new tab does not open.

  Thanks for posting the details of your system. I'm skeptical about the "CompTool0234 Community Toolbar". Could you disable some add-ons and see if that helps.

  On this tab:

  Firefox orange (or the Tools menu) button > addons > Plugins category

  Disable «Conduit Plugin»

  On this tab:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Disable the CompTool0234 community toolbar.

  Then very probably a link will appear to restart Firefox to make the change. Does make a difference?

• How to remove the drive of DVD of Tecra M3

  Have an old Tecra M3 which works, but had a defective CPU fan.

  Have managed to get and replace the fan, I came across a problem annoying when disassembly of the case.
  I could not for the life of get out me the DVD drive. According to everything I read the disc should come out just, but he wouldn't.

  I couldn't find anything (like a button or a screw) that it locked in.

  Anyone able to point me in the right direction (today more interest than anything else)?

  See you soon...
  KeV

  Hello

  The ODD on Tecra M3 is fixed with a screw on the lower side of the laptop. You must remove this screw first before you can remove the ODD.

  Underside, there is a latch to remove the ODD. To remove first the screw next to the latch, then slide the battery bay latch, then you are able to remove the ODD.

  Check this box!

• 600xt only occasionally don't market/wake... light green on the AC adapter is released... strange

  In the last 3 weeks or so our TouchSmart 600xt goes into a strange state 4 different times... have been left unattended for a period of time that we return to find the machine seems to be off and does not turn on via the power button (the button on the top right of the screen). He's usually asleep after 20 minutes, and if the Start button / stop he sleep will be orange glowing... in this case the light turns off completely. In addition, in this case the green light on the power adapter is not lit. The behavior of power adapter is quite out of the ordinary; its light never seens is disabled, even if the PC is turned off completely. But it is when this happens.

  The only recourse seems to be to unplug the power adapter, and then plug it back, after which the green light on the adapter lights, the power button lights up and the machine can be turned on by the power button.

  Concerned we will lose some files if stops keep occurred. We had the machine almost a year and this is a new behavior in the last 3 weeks. Note, however, that during each sleep cycle didn't appear. (The machine goes to sleep after being unsupervised on average 6 times a day and it produces "only" 4 times he slept in the last 3 weeks).

  Thoughts? Some circuit for energy in the power adapter went wrong maybe?

  I have come to resolution on this, but in a quite ridiculous way, with HP. My machine is under warranty so I called HP support. They have paid shipping for me to return the PC. The shipping box included explicit instructions, not to include the power adapter. I've included anyway so they could use it in the trials, including a note on the behavior and I figured the adapter not the PC. They I returned the PC with a note saying they were unable to repro the problem, and highlighted with a copy of the notice with the part that I intentionally did not follow! The log files indicate this was true, but he had not yet left on the MTBF I mentioned in the note... So even if they had used the adapter in the test, which is not surprising. The problem reappeared in the days at home. I called again. They paid shipping again. I've included the adapter again. This time they kept the PC on in the laboratory for several days until something of villain that has happened with the graphics drivers... not the unexpected loss of power and not something that I've never seen before in the newspapers. They replaced this material returned set. The problem reappeared in the days at home. I called one more time and said ' Please, can you just send me an AC adapter... If that doesn't work I'll send it back.» They did it. And I started using it. The problem is not reappeared since.

• Satellite A300-16I: how to set up six buttons next to the switch ON / OFF?

  Hello

  I recently bought a Satellite A300-16I.
  My problem with these media keys near the keys ON / OFF, it is that they always start Windows Media Player.
  And because I rarely use this program I would set up, so that it would start Winamp.

  If anyone has any idea how it's dan I would really appreciate to hear from you.

  Yours,
  Gahivelvel

  Hello

  I think that's not possible.
  On my Toshiba laptop control buttons are preconfigured and the settings cannot be changed.

  I presume that it of the case even on your laptop.

  What OS came preinstalled on your A300?

  If you are using Windows XP, then you can view the tool called; Toshiba controls
  It s in the control panel.

  Here you can configure the buttons; CD/DVD and lighting On / OFF

  Concerning

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.