Lightnig Cable burn!

Similar Questions

• Satellite Pro P100 - cable had burned down due to a faulty graphics card

  Hello
  I have a problem with my Satellite Pro P100 where to win t start, including trying to restart without the battery.

  I took it for repairers who managed to get it working again. They said a cable leading to the screen had to be replaced with requiring a General Service Officer, as it has been clogged up with dust.

  However once I got it home it works ok, but when I tried to access the options for Nvidia graphics display an error message came upward, which suggests that I have maybe need to install a driver of cassis, which I did immediately and restart the computer the problem has reappeared, computer wouldn't boot.
  I brought for repairs for the second time and they said the cable had burned down again because of a faulty graphics card and would cost a lot to replace.

  If someone has had this problem, it is possible to have just the graphics card replaced without replacing the motherboard and it is likely that the motherboard is too damaged.

  You will appreciate all the comments/tips

  Strange, but I think that there is no other way to replace the motherboard.
  The graphic card it s soldered on the motherboard if the entire motherboard must be exchanged.

  I know that's not good news for you buddy but if the graphics card is faulty, it should be replaced. :(

• Ban + DVD burner + cable compatibility

  So I'm considering buying a ban docking station for my X 201.

  Lenovo offers three different types of recorders of DVD for the ban. I see no real difference between them. If anyone can sound?

  In addition, Lenovo DisplayPort to DVI - D is $ 25, monoprice has an adapter for $10. MonoPrice asserts that their adapter is passive and requires the DisplayPort port to be able to carry signals DVI. This is the case with the ban or do I have to buy Lenovo adapter?

  Thank you.

  UltraBay slim is 9.5 mm, and ultrabay enhanced drive 12.7 mm. You cannot hold the latter into the former.

  Just get the ultrabay slim drive is available for T400, T500, W500. 43N3214 should be serial ata ultrabay slim dvd burner, so yes it's one you should get.

• How to burn 'Audible' book on CD?

  How to burn a 'Audible' book on a CD?

  Hello:

  I bought a book "Audible" format and have it on my iPhone. He plays a lot. However, it is very annoying to have physically plug my iPhone on the Flash cable in my car listening to the book whenever I'm in and out of my car. So, I want to burn the Audible format on a CD book and leave the CD in my car so that every time I get in the car, the book begins to play automatically.

  The question which is for the life of me I can not understand how! I don't remember how I got the audio book on my iPhone, but it does not appear in iTunes anywhere on my iMac: non-library: audio books or library: authors, or when you do a Spotlight search on the iMac looking for the title of the book.

  When I go to devices: MyiPhone:Books and then click the devices tab: MyiPhone:Audiobooks in iTunes (with the iPhone connected to iTunes) it does not appear there.

  I am a novice with computers, but I'm totally stumped! Maybe I downloaded the audio book to my iPhone wireless originally and that's why it does not appear on my iMac, but it shouldn't show somewhere when the iPhone is plugged into iTunes? Again, the book plays perfectly the iPhone, but I just want to burn it to CD for convenience when driving.

  Thank you very much!

  12.4.2.4 iTunes

  Mac OS 10.11.5

  iOS 9.3.3

  audible 2.14 (on iOS)

  Type "burn audiobooks to cd" or similar tool in the google search bar.  You should find the info you need there.

• chip burned wireless

  Reg: Pavilion p7-1120

  Serial number: {personal info deleted}

  Product number: QP777AA

  Warranty status: expired

  Contract status: expired

  This was purchased new. I've never used the wireless feature. I recently changed my ISP & projected computer blue and was not restart in safe mode.

  I took it to a computer retail store. They opened the office computer system unit. And found that the chip wireless cables were burned. I have been informed by retail technology that he had never seen it in its 10 + years of work. For me, I learned that the system could have started on fire.

  I kept the chip and the small cable connecting to it.

  I can't understand how to report a problem when I'm out of warranty HP should know about!

  Hi AAIA, sorry to hear that you are having problems with your computer.  I want to give you the number free of charge for HP Total Care.  1-800-474-6836 or if it's outside your calling area, please click on the following link.    http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Thanks in advance

• Equium P200 - video cable

  Hi people - my video cable has deteriorated for months - red screen etc. - Ive tried to replace it, but I received a strange burning smell, and now there is no image on the screen at all - advice please?

  I can't find a video tutorial of how to do to replace the video cable for this model at all?

  Thank you very much

  What you need is the maintenance manual document. Problem, it is that this document is not a public document, so you can not find it for download.

  Want to replace video cable?

• install dvd burner lightscribe Pavilion in my HPEnvy Phoenix

  How can I install burner lightscribe dvd supermulti/cd of drivers of my old HP Pavilion a6500f to my new pc to HPEnvy Phoenix 810 - 150se dt

  Hello

  The Lightscrbe in your old PC Player uses a SATA connection by the HP documentation.  These HP published instructionswill show you how to add a second optical drive. Look for the extra power connector near the existing optical drive.  You will need to buy a SATA data cable and then plug it into an empty SATA port on the system board.  Use one of the empty SATA 3 Gb/s ports. See the image below.   You can consider wearing a latex medium weight glove to avoid scratches and cuts on the hands.

  

  The last issue is to install the LightScribe system software.  Try to reinstall underlying lightscribe systembefore installing your burning software.  In addition, you will need an application that will support Lightscribe.  Burning CD/DVD from Cyberlink or Roxio applications should support optical drives Lightscribe.

• Male F/W adapter/cable Thunderbolt or alternative

  Need a solution to copy files from my Mac Pro 2006 1.1 (OS X 10.7.5) on my end 2015 Refurb Thunderbolt Apple iMac. 10.7.5 is not do and cannot, by Apple's Support. Something other than burning files on disks. I have seen FireWire adapters are female to male. m - m need to go from one computer to the other. Information system States FW bus/built in the hub is up to 800 Mb/s; Unknown device is up to 400 Mbps. thanks in advance!

  There are three FireWire cables:

  FireWire-400 regular are six PIN to 6-pin

  Are cables FireWire 800 9-pin to 9-pin (and a different shape)

  the camera cables are Firewire-400 without power cables, so that they are four pins to four pins.

  to convert almost anything to anything, just buy the cables with the right plugs and the cable automatically performs the conversions. Or you can buy an adapter and use a standard cable, if you prefer. There is no electronics in the adapter - it has just two different connectors on it...

• Install external DVD burner on NB200

  Hello
  It is a first post of time following the purchase of a NB200 using OS WinXP installed standard. With the NB200, I also bought a LG GP08LU10 "External Super Multi DVD Rewriter". When I plug the DVD climb in the NB200 it powers and the NB200 recognizes hardware such as a CD-ROM drive. However, it is disabled. The Assistant added of Harware WinXP running causes the message "this device is disabled (Code 22)".

  A check of the CD that came with the DVD reveals that there are no drivers on the CD only DVD burning and playback software.

  I plugged the DVD player on my laptop Lenovo that is also running Windows XP and unity "plugged and played" as you would expect.

  A search on the web based on product LG GP08 ID creates very little success with one or two it seems to describe similar symptoms, but not solutions. More talk about the installation of a driver, but I was not able to locate a driver on the LG site (or as I said, on the product CD).

  The DVD player comes with a 'standard' USB cable and a USB power cable. Each single cable and two cables with the NB200 plugged into the power supply and it still is not plug and play.

  Does anyone have any suggestions?

  Kind regards
  TESA

  Hello

  According to the Microsoft page, 22 error means that the device is either disabled or not started. Eventually he hasn t started in your case.

  There are several proposals for solution.
  One of them told you he must remove the Device Manager and reboot the laptop.
  After that new reboot of the operating system should recognize the DVD drive connected again.

  On the other hand, you could try to remove all USB hubs and controllers from the list of devices USB and should restart the laptop again.
  This help to refresh the USB drivers.

  I not quite sure if deleting upper and lower filters change anything but maybe what it s worth m to try.
  Start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the laptop and check the functionality of DVD USB drive s.

• Portege R100, PXE - boot problem - E61:Media Test failure, check cable

  My portege r100 4004GAH original hard drive has had some problems recently, so I decided to replace it with a bigger 4006GAH. Specifications, it seemed that it would be appropriate.

  So I tried to install standard windows top. Unfortunately as I soon discovered that didn't work and lead to BSOD. I looked online and remembered that I had in fact to use the recovery of three discs. Fortunately for me I still had the freshly sealed and I've also owned a combined remarkable Targus CD drive supported. If in the three discs are gone. All seemed well and after that the last drive ended, I was asked to remove the disc. The laptop has rebooted and then gave me the

  PXE - E61:Media Test failure, check cable
  PXE - M0F: Exit Intel PXE ROM
  Insert system disk
  Press a key to continue...

  I thought it might be in the order of start, but verified that and it seemed right. HD was first. I also changed the order and the same error came.
  I thought while another component of my laptop may be broken. So I put my old hard drive in. It started fine.
  The next thought that the new hard drive was defective.

  Fortunately, this is not the case. Because when I used the recovery disks not only heard disk hard turns to the top, but the hard drives were detected and recovery installation displays the correct memory size.

  I'm completely stumped on hat w what is the problem. Any help would be appreciated.

  It is not easy to say what the problem is but you said the Portege started fine with the old HDD. So I think that there is something wrong with the new.

  In your case I test the HARD drive with a special tool like Drive Fitness Test. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  In addition I am interested in what you have the same problem with a Microsoft installation disc if you have one.
  So try if your HARD disk has no errors.

• Satellite L665D - No POST after LCD cable Strip

  I have a Satellite L655d S5550 and a few months ago, it has no video after a break caused by the process of closing LCD I've ever done.

  After her, I try:
  a power draining
  turn to the memory of RAM slot
  Turn on with just a memory
  Odd and band and reaset hdd cables
  Clear CMOS

  None of this works, the computer displays leds and its hard drive, cooler works normally but still no video.
  I forgot for a couple of months so I try to fuel once and 2 times it displays video normally, but after the third time without problem the video returns.

  After it, I opened the laptop and with it under tension, I did strip the cable of the LCD of the motherboard, then the system closed immediately.

  So, since it does not supply the computer power with or without baterry.
  The power led flashes and don't fill POST heatsinhk does not work.

  Any idea? I fear it's a motherboard burned, because I am of the Brazil and there is no replacement for it.

  I think that there is a hardware problem but from my point of few Interior/LCD display isn t the troublemaker.

  The point is that even if the internal screen would be defective, the laptop must turn on correctly and in an external monitor, it should be possible to use the laptop.

  For me, it seems that the motherboard or card mother as GPU (graphics processing unit) could be faulty.
  This malfunction is a worse because the replacement of the motherboard is a very expensive procedure and I think that it s not worth to fix it in case the warranty isn't valid more.

• Tried to set my magsafe but I think I burned my macbook

  Has tried to fix my magsafe welding cables (to the Board of Directors of the friend of small white square) but I put them in the opposite direction, did not work.
  Now, I bought a new one and it is not even to turn on the light, I burn my macbook?

  MacBook pro 15 a1278
  85W MagSafe power adapter

  You could certainly give your MBP a minor shock with pole reversal.  Start with a Reset of the MSC because that * can * help the hardware controller is found... Reset the management system (SCM) controller on your Mac - Apple Support

  Perhaps a visit to the Apple Store, but try the MSC first

• Satellite 1730CDT, DVD burner replacement

  Hello
  is it possible to replace the CD with a DVD burner drive?
  This laptop does "cable select"?
  Guenter.

  Hello

  normally, you can only replace the existing by that same player, but you can visit http://www.toshiba-europe.com/storage and watch if a DVD burner fit!
  You need to know which drive you have!

  Good bye

• How to make my computer send all audio data via an optical audio cable instead of making headphones?

  Howdy,

  To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

  Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

  (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

  (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

  Thanks in advance!

  My office is:

  WANT to h8xt,
  • Windows 8 64
  • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
  • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
  • 1 TB 7200 RPM SATA hard drive
  • No secondary hard drive
  • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
  • 300W power supply
  • DVD SuperMulti burner
  • LAN wireless-N (1 x 1) card
  • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
  • No additional desktop software
  • No additional security software
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound
  • HP USB volume control keyboard and mouse with Win 8 keyboard
  • Adobe Premiere Elements and Photoshop Elements 10

  And the laptop:

  HP ENVY 15t Quad

  Hello @_goma,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

  To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

  Step 1. Click on the button of the Windows key on your desktop

  Step 2. Type "Control Panel."

  Step 3. Select "Control Panel" in the upper right corner

  Step 4. Select sound

  Step 5. On the Read tab, right click on the white box under available devices

  Step 6. Select "Show disabled" and "show disconnected devices".

  Step 7. Connect your Audio optical cable

  Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

  Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Satellite A40 burner compatibility

  I want to improve my carpet * a combo drive to a DVD burner, I tried the 6650 NEC and SONY DW-Q58A, the machine does not recognize one or the other. Is anyone out there who will work can recommend?... Thank you

  Hey Ross,

  I replaced the combo drive in my A30 with a carpet * a UJ825S several months without problem. Generally, you can use any of the same physical size as DVD burner long that its configuration matches your existing combo player. Optical drives can be one of three configurations:-

  1 Master

  2 slave

  3. Select Cable (C/salt)

  Your existing combo drive will be one of the above and your new drive must be the same, otherwise it will not be recognized.

  Unfortunately, most dealers specify what their readers are so you need to check first with them or even to consult the manufacturer to find out.

  Kind regards