Lightroom CC becomes slow after several cultures

Similar Questions

• Satellite A100 - Internet becomes slower after 10 minutes

  Hello

  the Satellite A100 worked well for a few years, the internet has become suddenly too slow after 10 minutes of the start.
  The laptop switched on the first time that the internet works very well the 10 first minutes then becomes slower and slower until almost no packets are received but the connection does not completely down.

  Suspected spyware, rootkit, is cleaning up, and then installed from the disk recovery

  Then I tried the same thing. Uninstalled the connection to the local network and then reinstalled from the Device Manager, nothing.
  I figured that the Ethernet port is a failure. Then I used an adapter usb-to-Ethernet D - Link is completely independent of the integrated Ethernet hardware. Nothing, same behavior, working, first fine then Firefox displays a downtime

  The modem, cable, internet are all very well since I have tested with a PC and a laptop Fujitsu (5 years) and they all work very well. Even the D-Link works fine.
  The Toshiba pc diagnostic tool specifically says "Network Fail", but it crashes exactly?

  An idea or a similar experience?

  Hello

  Hmmmmm... It sounds quite complicated.
  What is with WLAN? Have you noticed the same behavior using the WIFI connection?

• laptop computer becomes slow after a while of use and when the charger is connected, becomes normal.

  Hello

  I use HP Compaq Presario CQ62, Windows 7 Ultimate 32 bit OS, 4 GB ram, Intel core i5 processor. It is a portable 4 year old. The battery was changed 8 months ago.

  Now, coming to the problem, my laptop will work very well for a few minutes at the start when I turn it on. After some time, the laptop everything becomes so slow it takes forever to work. This occurs when the power is not connected. If I connect power, less than a minute it starts to work faster. But the laptop would become very hot.

  This problem started when I updated my iPod. After update iPod, I had this problem even while the charger is plugged. Later, I changed the OS Win7 Home premium genuine to Win 7 Ultimate. (Pirates). I have run the genuine Antivirus, cleaned the registry and everything. The problem persists. Please help me with this topic.

  Thanks in advance

  -Kere

  kaaranjikere,

  So I checked the error you are getting, and it is not the battery do not, it is the power which is a failure and that includes everything for the power.

  So it is likely that something wrong with your motherboard.

  You will need to take the system to someone looking over everything.

  I would like to know how everything goes

  Nice day.

• Lightroom CC running slow after recent update. [was: most of the time it's very slow]

  After that the 2015 update is very slow to 90% of the time

  Hi raleighg,

  Suggest you follow the steps below:

  1. go in the Lightroom preferences > General > uncheck "Show Add Photos Screen.

  2 preferences > Performance > uncheck "use the graphics processor.

  3 restart Lightroom, and check again.

• Lightroom will not open after several tries

  I'm unable to open Lightroom and get the following message appears each time:

  "Lightroom has encountered an error when reading the previous cache and needs to stop smoking. Lightroom will attempt to solve this problem, the next time it starts. »

  It does not solve the next time and I'm unable to open Lightroom. Help, please!

  Rename your .lrdata file. This will force Lightroom to create a new cache file and Lightroom should do it again for you. After you have things running again, you can delete the folder you are renaming.

• Why a sql statement has become slow after upgrade to 11g database

  Hello
  
  My previous version of the database is 9I and any sql statement are well-developed.
  but after upgrading to 11g database, a sql statement become slowly.
  
  My senior dba friend told me there are a few different calculating methods from 9i to 11g.
  is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
  
  Sean

  The administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
  http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366

  And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.

  HTH
  Aman...

• Selection of CS5 tool becomes slow after that put 12.0.3 updated

  The right marquee tool can't stay with the cursor. If I make a selection, the edge of the rectangle is like 100 pixels behind trying to follow the cursor that I am away. Same thing when it comes to drag the selection; the selection of mobile looks like 0.5 seconds late behind my cursor.

  Try to set the open gl in advanced base settings.

  That should speed up operations as the text tool.

  MTSTUNER

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• I7 quad PC, 12 GB RAM, 64-bit slows down after several click operations

  My usual assembled quad i7 PC is about a year old.  I had a recurring problem of the working speed using the mouse during video editing.  The first mouse functions start clicks quickly to the Premier Pro and other Creative Suite CS5 software.  However, after only several mouse clicks, nothing appears to register.  After a short time, mouse clicks become active again but the PC becomes slow.  It was recommended that I check with Adobe to confirm that my system complies with the specifications of the Creative Suite CS5.  As far as I know, the system exceeds the specifications of the software box.  I fear that one of the RAM modules may not be meeting the specifications for speed.  How can I check this for the following configuration or other suggestions?

  -ASUS P6TWS Professional Motherboard

  -Intel Core i7 920 CPU

  -12 GB OF DDR3 1333 RAM

  -4 HD 1 TB

  -Video card ATI RADEON 4670 1

  -Coolermaster 690 case separate real power 700W

  -LG BlueRay writer

  My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer, I built, with similar and very different things

  Win7 64 bit Pro with all updates (automatic) and with all updates (automatic), so the body is 5.0.3 CS5 Master Collection

  Wired keyboard and mouse (old style, no USB) using the generic driver for Win7... not intellipoint, I've read in other messages CAN cause problems

  Connection through DSL modem, which is also a network of House (2 computers) via the DSL modem

  I had ZERO problems of any kind, with the body

  My best guess is that, Yes, the "bells and whistles" of your intellipoint mouse driver CAN cause problems... but with a wireless mouse, YOU indeed this specific driver to make the mouse work not at all

  Sorry... I don't have any other ideas to offer

• Firefox has becomes slow and unresponsive after that I tried to install the addons (not installed)?

  I recently format my computer and reinstall windows 7, since it was the only way I know of to solve the problem with Firefox (I already had this problem too). I download the latest version of firefox 33.0.2 and install it. This version was super fast. But becomes slow and unresponsive when I tried to install the Add-ons. I visited the official site of firefox and searching for addons, when I tried to install addons, Firefox crashed. Therefore, it has becomes quite slow and cannot restore previous sessions. Even to type my email address, it takes more than 5 minutes and reacts more frequently (after typing each letter).
  I want to know if this is due to some viruses, or this version of firefox is not "stable".

  Hey there,

  We are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID begins with bp - and then back to your forum question but that stick in the box of "Post a response. (Please do not take a screenshot of your plant, just copy and paste the ID image below is just an example of what your Firefox screen should look like)

  

  Once you have done so, you could try the Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  I hope this helps!

  Curtis Parfitt-Ford
  Support for Mozilla

• Search slows down or stops after several research

  When I use Safari, I might have to do more research to get the answer I want. However, after several searches, the search Calera; or, worse still, I have to press return activate my browser again. But when I run once again, the same thing will happen after some research.

  I noticed that several criteria research complicated the problem. Or a research topic of the kind of obscure.

  My system is relatively new, so I'll try to understand why this is happening. I always had a few applications to the toolbar, but that's never been a problem before.

  Advice, fixes or solutions? Thank you!

  It seems that the problem can be mitigated by disabling the prefetching. And then I found this article online:

  ING-dns-prefetch http://appletoolbox.com/2010/09/Fix-Safari-Slowness-STALLED-page-loads-by-disabl.

  So far, it's worked.

• VI causes CPU load after several days of running

  Hello

  I have a strange problem. I have craeted a control test VI bench and it runs on five computers, five test of control systems. All PCs have almost the same hardware, same card mother, same processor, etc.

  Normally the CPU load is around 50% when I run the VI, but to a PC, CPU load goes up to 85% after several days (maybe a week) market continues and the PC is almost tied up - VI execution becomes very slow (10 times slower) and the mouse moves only very slowly.

  I have first thought that the PC has a problem, but the problem disappears as soon as I stop and restart the VI!

  I don't even have to put an end to LabVIEW - only my VI and then all is well again.

  The problem does not occur in the other four PC, but I can't say for sure.

  The Task Manager indicates that LabVIEW causes CPU - use swap file load is small.

  Is it possible to analyse the causes of high CPU load?

  I use LabVIEW 7.1 Professional

  Operating system: Win XP (SP 2 or 3 that I can't remember)

  P.S. I have no loops without waiting-functions.

  johanneshoer wrote:

  ...

  the PC where the problem is occurring only 2 x 512 GB RAM, others have 2 x 1 GB. Maybe I have the upgrade of RAM would be my first action...

  ...

  Assuming that it's a typo problem, is you have run out of memory physics and are returning to the virtual (which is 1000 X) slower than real memory.

  Christian has nailed.

  Ben

• EA6500 BECOMES SLOW INTERNET

  After you have installed the EA6500 router, my internet has become slow. I have connected my PC to the router by ethernet cable and I disconnected all of the Wi - Fi device and measured 8, 75 MB. So I connected the modem cable directly on the PC (no router) and measured 17, 8 MB. Why the EA6500 goes down fast? Could someone help me? Note: my firmware is 1.1.28.146856.

  It's more than likely the solution. Download and upload in media prioritization parameters settings limit the speed of networks together values they are willing to, then in the case of several devices try to access the internet, priority devices have priority over other devices.

  To work around the limitation of speed, you can set two values '0' to indicate the router to not limit the maximum download & upload, or find your maximum speed of connections and input the correct values. I say you understand because that due to various circumstances, that your internet connection is perhaps not able to realize what your internet plan, or it may exceed what it is supposed to be like mine don't. You can of course just go with what it is supposed to be so, nothing wrong with that.

  Edit: If I remember correctly, the reason that this, he must keep the coherent connection and, with the known maximum rates, the router can better determine exactly how to limit devices non-priority when there is to do.

• When you use your hard disk defragmentation process starts but seems stuck and won't end evn after several hours. How I can remidy this?

  When you use "Defragment your hard drive" the process starts but seems stuck and won't end evn after several hours.  How I can remidy this? I was already able to defragment successfully.

  Hello

  How do you know that never, it ends when there is no GUI on Vista for Defrag?

  in vista, the defragmentation process works silently in the background

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

• Satellite A300 - after several months, it became noisy

  Hi all!

  I have a problem with my Satellite A300. The cooling fan is not functioning effectively. The fan runs almost constantly, even if the PC in standby, when I do nothing on computer.
  I cleaned the fan holes and ventilate the air, so it is very clean. I checked the cooling modules in the Toshiba Power Saver, as well as in the ATI PowerPlay.
  All settings are OK...

  The question is, why my Toshiba works fine, when I just bought it, but after several months, it has become a noisy machine? It was very very portable and fan worked perfectly...

  Thanks a lot for your help!

  Hello!

  In your case I would use compressed air jet on the underside and on the left side of the laptop to make sure that blow you the dust from the cooling fans.

  After cleaning your laptop, you should look into the Vista power management. Here you can change the cooling method and choose another option, for example optimized battery.

  Maximum cooling performance method means that your CPU can run on the highest speed and so it needs more cooling.

  Good bye