Re: HP 6500 has more print head always needs replaced

Similar Questions

• Why my hp officejet 6500 has more printer take ten minutes to four pages of fax?

  HP Officejet 6500 a Pus E710n-z series

  Windows 7

  Why my hp officejet 6500 has more printer take ten minutes to four pages of fax? No change has been made and no error message. This seems to be an extremely long time for only four pages!

  Firmware has been day t0 then did a hard reset and tested a fax. seems to be faster, but was not a very detailed page. will be able to say when I have more pages to send. If this is no better at this moment, will post back.

• OfficeJet 6500 has more printing problems

  My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

  Can anyone help?

  N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.

• Office jet 6500 has more printer offline

  HP Office Jet 6500 has more problems with the paper jam.  The printer now shows "offline".  The printer works correctly when you use the copy function.  This is a wireless printer.  I tried printing HP and Scan doctor but the test page does not.

  I reinstalled the driver and who took care of the problem.  Thanks for the quick response.  I will try your solution if it never happens again.

• OfficeJet 6500 has MORE printing problem

  Y at - it a setting to load the paper? My print jobs is now too high on paper. I have recently updated my computer to Windows 8.1 but I do not know if this concern began before after I've changed computers. I printed the page diagnosis and the letters are about 1/3 cut top

  Welcome to the mike325 forums

  I saw your post on your Officejet 6500 more model cut your impressions. I suggest an alignment running on the printer to see if that helps. You can also run the HP print and Scan Doctor to solve printing problems and that the tool can help to clear up the problem.

  To help alignment, click here and scroll down until "step 5: align the print head": align print head

  I hope that these steps to do the trick, please let me know the results!

  Have a wonderful Thursday

• Re: Officejet 6500 has more - printer goes to sleep, wakes.

  Hello

  Location: HP Officejet6500A more - new iMac 27 "with Mac OS X 10.7 (Lion) - new driver installed OK HP - printer is connected via USB and I turned off the power on the printer wireless.

  After that full power on the work of the printer scans well, work, fax work - but what printer goes to sleep "indicated by the power LED flashes slow" I can't wake him again when sending a new print job - I need to do a full power off/on power by removing the power cable.

  When the printer is "asleep" utility printer HP cannot connect until I do a power full printer deactivation / activation.

  While the printer is in standby, pressing the flashing slow power switch / light has no effect to wake up the printer, only a full power/turn off works.

  I could not find info on the led slow blinking power manual?

  Any thoughts?

  Thank you

  Tony

  Hello

  Thanks for the post.  With this one, I recommend following the steps listed in the link below.  Make sure you are plugged directly into a wall outlet, not a power strip or conditioner.  Good luck!

  http://support.HP.com/us-en/document/c01321436

• Re connecting my HP Officejet 6500 has more print

  my printer has stopped working.  I disconnected everything... reloaded - shows in my devices, but still is not printing

  Hi Karen,.

  Please answer these questions to better understand the issue.

  1. do you have that you have installed the latest drivers of printer that is compatible with Windows 7?

  2. you are trying to connect the printer via a wired or wireless?

  3. do you get an error message?

  You can follow the steps in troubleshooting of this article. This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also the suggestion of this link to HP support:

  Printer HP Installation troubleshooting

  http://WWW8.HP.com/UK/en/support-topics/printer-installation/printer-troubleshooting.html

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• 6500 has more: printer was working fine and then stoped feeding. Found a small gear broken wheel-shaped plastic

  Printer was working fine and then stoped feeding. I found a small gear broken wheel on the stack of paper.

  Well, your printer is broken. If under warranty call HP.

• OfficeJet 6500 has more: printer will not use BLACK ink to print in BLACK. Mix of colors rather than use BLACK.

  Printer prints BLACK ink BLACK, instead he mixes the colours to make BLACK.  It creates copies in BLACK only, without mixing colors to achieve the BLACK, but when I ask it to print something it automatically uses the ink color.

  In properties, advanced, I checked the box to print in BLACK only, but did not help.

  In the printing preferences, shortcuts, where it says printing in grayscale, do you feel black ink only as a default?

  I don't know if it will work, I do not use this parameter or the Advanced setting, I have been using high-quality grayscale, but I'm interested to know why, also, when I print 99.9% of the time with color, what I need to change the color ink cartridges so frequently.  You say the color of those who are used to make black.  That makes no sense to me either why the printer would do that, except high-quality grayscale means he uses color inks vs only Black Ink is not.

  Test printed with two parameters, and that is exactly the same, so I won't set my default preferences for levels of gray-black ink only printing and see what happens.

  What how can you tell whether or not the printer is mix colors?  (by the way, if you use unusually fast color ink)

• My new HP 6500 has more printer will install properly and paperjam, on the contrary.

  This printer is new and I tried new drivers, no Jam (when he's going to say that instead of print).  I almost fixed everything on my pc before, but it made me very frustrated.   I reconnected the printer several times, but also I do not believe that the printer receives adequate controls of the PC which leads me to believe that other readers download I downloaded and the printer cd does not work for some reason any.  I'm trying to figure our why it seems that the printer will not receive any orders, before it says "paperjam" reason appaqrent.

  Hello

  Follow the form of measures troubleshooting article and check if that helps.

  'Paper jam' message displays on the all-in-one

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02441153&cc=us&DLC=en&lang=en&LC=en&product=4083977&task=solveCategory

  Also, try to contact HP support and verify.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• OfficeJet 6500 has more will not print black - Solution

  My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

  How to reset the 6500 has more

  Thank you

  I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

  My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

  Steps to fix it.

  1. remove the cartridges

  2. remove the cartridge door / carrier, lift the big lever to release him.

  3. clean the contacts of the cartridge with water and cloth.

  4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

  5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

  We then conducted cartridge alignment and it 'Fail' printer still does not work.

• Setting up my HP Officejet 6500 has more the Question: first install the disc?

  Hi all!

  I was wondering if I should install the disc that came with my HP 6500 has more printer FIRST before connecting it to the top wireless? Or connect upward wireless first before installing the drive?

  I saw somewhere where the plug & play when the connected printer caused some problems that did not accept the disc that came with the printer it seemed to replace the drive.

  Any help would be appreciated before doing anything with the hook to the top of my new printer.

  Thank you!

  If you connect the USB printer that the answer is YES.

  First run installation, during installation, you will be asked to connect the USB cable, then only, you need to connect.

  Kind regards

  Shlomi

• HP 6500 has more transport Jam

  I have a HP 6500 has more printer that has stop working.  Appears on the printer 'Transport Jam'.  I search the web and find videos that have troubleshooting steps to correct this problem, but they have not been of any help.

  When I turn on the printer, I hear a clicking sound until the "Carriage jam" message appears on the printer screen.  The print carriage is stuck on the right side of the printer and will not move.

  Any ideas?

  I'm sorry that you are having this problem with the printer. Here a link to a document from HP that addresses transportation for your model of printer jams. It will give you the troubleshooting steps that should be taken to resolve the issue you are experiencing with the printer.

  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• replace the print head, always print the habit or alignment. OfficeJet 6500 has more E710N

  cleaned print head, installed new print head, always feeling used or align.

  Hello @tgrtlr , welcome to the forums there.

  I understand your Officejet 6500 a is not by aligning, or print for you and I have a suggestion to use your troubleshooting steps.

  Check out this guide and try the steps: "Alignment failed" Message appears on the printer control panel

  If these steps do not help, and the alignment is still not completed successfully and you cannot print, you can also try these steps by Bob_Headrick: black ink does not

  If you want to follow through with instructions to Bob, I would recommend only read and carefully.

  If all else fails, I would finally call HP to see what your replacement or options trade can be.

  Details of HP:
  If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada: click here.

  All the best! Have a great Monday!

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.