LJ Ent m601: LJ Ent m601 PCA connect internal.
Does anyone know if connector J2002 (top of the Exchequer, just under the USB connector) should be something related to it?
My service manual says 5 connectors to disconnect to change the Board but I saw 4.
And in most cases (as for the DC controller) if there is an empty connector the manual mentions that.
If anyone knows that there should be 5 cable 5 connectors please help me find whre who 5th going to if I can try to find it in the printer.
Thank you
Dan
Hello
J2002 connector cable is designed for HIP (M602 and M603) models only the Pocket Hardware integration.
Sound off for printer 601.
Concerning
HP.
Tags: HP Printers
Similar Questions
-
Two servers to connect internal using the virtual machine even in a swimming pool?
I was deploying a pilot here VDI environment. Working with the deployment with the planning guides, most things went smoothly. However, in practice (and by the guides and information online) I learned that ultimately it works best to have two individual servers to connect internal (not replicated). a dedicated to access internal only, and the other coupled with a security server in the DMZ.
My question is, can a system (physical workstation w / agent or VM) live in a resource pool manual for two managers of internal connections? What is the best way to manage a scenario in which a worker would use a specific virtual machine during the day (and thus the internal connection manager), verus remotely using this same VM?
Also, when you have a connection to Server 2, should a 2nd database of events created in SQL, or if it can share the same database of events?
Thank you!
sketchy00 wrote:
However, in practice (and by the guides and information online) I learned that ultimately it works best to have two individual servers to connect internal (not replicated). a dedicated to access internal only, and the other coupled with a security server in the DMZ.
Lol this is not correct. For a mode environment that supports both internal and external users, it is true that you should have one or more servers dedicated to the internal connection and one or more dedicated for external, but they should all work as a replica group. for example, to install the first as a standard instance and others as a replica instance. In this way, users can access the same pools they are internal and external, administration can be performed only once on the entire environment.
Architecture and planning guide is a good reference.
http://pubs.VMware.com/view-50/topic/com.VMware.ICbase/PDF/view-50-architecture-planning.PDF
In particular, look at the diagram page 61 that shows this. All 4 connection servers are in the same group of replicated, then it will have been installed as a standard and others installed as replicas. Of course, you don't have to have 4 unless you have HA needs, you can have just two and so without balancing the load, but in all these cases, the connection servers share the configuration via the replication data.
I hope this helps.
Select this option.
-
ORA-00257: archiver error. Connect internal only, until that releases
Hi all
From the connection to my 10g database, I encounter the error ORA-00257: archiver error. Connect internal only, until released by.
How to connect internally and to solve this problem step by step.
Kind regards
StephenDollongo wrote:
Hi allFrom the connection to my 10g database, I encounter the error ORA-00257: archiver error. Connect internal only, until released by.
How to connect internally and to solve this problem step by step.
Kind regards
StephenYour disk space or the flash recovery area is full, delete the old archivelogs or backup them and then perform
rman target / crosscheck archivelog all; delete expired archivelog all;
or connect with sqlplus
sqlplus "/as sysdba" show parameter db_recovery_file_dest_size alter system set db_recovery_file_dest_size=
alter system switch logfile; -
I get this in my weblog.
"Apache/2.2.26 (Unix) PHP/5.3.28 with Suhosin-Patch mod_ssl/2.2.26 OpenSSL/0.9.8za DAV/2 (dummy internal connection).
What does that mean? Should I be worried?
Thanks in advance.
The "internal dummy connection" is normal and expected behavior of the Apache web server.
What is a little more regarding here is the other parts of this message... OpenSSL 0.9.8za is old and was completely obsolete and known vulnerabilities (he is about two years, and OpenSSL moves pretty quickly), 2.2.26 Apache and php 5.3 are also two bottom review. I don't know the module mod_ssl GLib version.
If this box is running Lion Server, then please consider an upgrade to something more recent.
-
Please how can I know if inside the drive is sata native or with USB soldering on the circuit board?
My model is: HDTB115EK3BA
Thank you.
Hello
Unfortunately, the Toshiba STOR. E BASICS - BLACK 2.5 specifications page "-1.5 to provides no details on the controller, but in my view the inside of the box, you will find a common SATA 2.5 which is connected to a controller HDD USB SATA."
http://www.Toshiba.EU/hard-drives/portable/store-basics/hdtb115ek3ba/You can also try some freeware like HDDscan for example tools to scan the HARD drive and get more details.
-
Can I eject my usb devices connected internal SATA hardrive...
OK we know that when you plug in a usb flash drive, you can click on the usb icon in your taskbar and then eject the device... Well well my internal sata HDD my OS running on shows in this list as well! I think it's a bug. Just a thought.
Hi, the fireballs
I don't know if this is a bug or not, but it is interesting.
I think that I him would NOT eject just in case. He'll probably just a mistake.
But as I said, I wouldn't do it. It could make your system unbootable.If you want to report to Microsoft and see what they say, I included a link to a site for reporting something 'interesting '.
Matt Hudson
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
VPN remote access - no network connectivity internal!
Hi Experts,
I understand that it is a very common problem when considering the implementations of IPSec VPN for remote access using Cisco VPN Client. But for the last six months, I have tried to configure remote VPN access to as many sites customer and gets stuck to the top with the same question!
-The remote VPN Client connects, authenticates successfully to the local user database (to make things easier, I used the local user authentication), the tunnel is set up (I could see the exit of the isakmp #show her as a AM_ACTIVE ). So I think that the parameters of encryption and authentication for Phase 1 /Phase 2 should work because the tunnel is having successfully established
-Now comes the question, no connectivity to the internal network. I tried all the possible solutions, that I could find online.
1. the most common problem is NAT - Traversal not active
-Compatible NAT - T with the time default keepalive of 20
2. None of the configurations NAT to exempt remote VPN traffic
-A ensured that Nat configurations not present in configuration and internal network 192.168.1.X VPN traffic networks VPN 192.168.5.X /192.168.10.X being exempted NAT
3-Split tunnel configurations
-Reconfigured Split tunnel access list configuration Standard access list expanded (although not required as a Standard access list is more than enouugh, if I'm not mistaken) to allow traffic selected from 192.168.1.X for 192.168.5.X/192.168.10.X that will create routes on Client that allows users to simultaneously access VPN resources and access Internet VPN client. The Tunnel from Split network group was added again to the group policy.
4 enabled Perfect Forward Secrecy (PFS) /Disabled
. It may be an extra charge, it has been disabled / enabled
5. the road opposite Injection
-Ensured that a temporary reverse route has been injected to the routing table by allowing the reverse Route Injection to insert automatically the temporary static routes to the remote tunnel using the command set reverse road networks
A few more interesting things were noted:
Encrypted and Bypassed packages found when a continuous ping started the ASA inside the interface.
No decryption happens of the VPN Client, which means that there is no answer back from the network traffic statistics.
Decryption and packages are found be increasing when I try to ping of the IP address to the customer (192.168.0.10) has published the SAA. But on the SAA, I'm not back any response and showing as? . So that would mean that there is communication of ASA to the customer via the VPN tunnel while no communication is happening from the internal network to the customer
The entire configuration is shown below
ASA Version 8.2 (1)
!
ciscoasa hostname
activate the encrypted password of AS3P3A8i0l6.JxwD
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
address IP X.X.X.X 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
access-list extended SHEEP allowed ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
ST1 list extended access permitted ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
IP local pool testpool 192.168.0.10 - 192.168.0.15
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 X.X.X.X 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dyn1 1jeu transform-set FirstSet
Crypto-map dynamic dyn1 1jeu reverse-road
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
mymap outside crypto map interface
crypto ca server
SMTP address [email protected] / * /
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.1.10 - 192.168.1.132 inside
dhcpd dns 8.8.8.8 4.4.4.4 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal RAVPN group policy
RAVPN group policy attributes
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value ST1
the address value testpool pools
dk Z6zukyDvwVjP7o24 encrypted privilege 15 password username
sv i1gRUVsEALixX3ei encrypted password username
tunnel-group testgroup type remote access
tunnel-group testgroup General attributes
address testpool pool
Group Policy - by default-RAVPN
testgroup group tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:48f0863a70b8f382c7b71db0b88620fe
: end----
Could you please help me identify where I'm going wrong. Its been a long time I have trying to figure out but nothing seems to work! ;-(
Help, please!
Thank you
ANUP
(1) pls replace the tunnel ACL ACL standard split as follows:
no extended ST1 192.168.1.0 ip access list allow 255.255.255.0 192.168.0.0 255.255.255.0
access-list allowed ST1 192.168.1.0 255.255.255.0
(2) add icmp inspection:
Policy-map global_policy
class inspection_default
inspect the icmp
(3) Finally, I add the following so that you can test the ASA inside the interface:
management-access inside
-
Connection internal drive Bay multimedia input usb dislodged the HP Pavilion m9350f?
I got my PC back from "That Chick" computer for the video card GE Force faulty repair and connection hard drive of personal media on my HP Pavilion m9350f Bay PC came off in transit (i "give he's the center of repair a break). When I plug it on the motherboard for the internal USB connection back in? the electric connection is OK only the small connector 5 pins for the usb connection that is on the motherboard hangs inside the case, I might refer to "The Computer Chicks", but tha would be cos on another $ 100.00 of service and shipping costs, and if I knew where on the motherboard, it will I could plug it in me. Thank you if you could send me a picture or a motherboard layout where it happens I would be very grateful.
Richard W.
Check this: http://support.hp.com/us-en/document/c01421635
Normally, this Pocket drive USB headers are connected to the motherboard via the 'F_USB1' or "F_USB2" but I see a different type of USB plug labeled "F_USB3' through 'F_USB6', so it can use one of these check the plug to check the connection type
BTW: Scroll to the tab layout of motherboard on the linked page and click on it to see where the plugs are on the photo page layout I'm talking about.
-
Archiver error. Connect internal only, until that releases
Hello
I have Oracle 10 g on HP UX instaled. When I connect to it as sys I get no error. But when I login as another user (WEB_EDTOR) I get the error "archiver. "connect to internally only until that releases. I quried SET * OF V$ RECOVERY_FILE_DEST. I know the SPACE_LIMIT is 4070572032, SPACE_USED, space_rec AND NUMBER_OF_FILES are all 0. What could be the reason for this error? Thanks in advance.
Published by: Mikail October 20, 2011 22:41
Published by: Mikail October 20, 2011 22:49
Published by: Mikail October 20, 2011 22:57After more than a few things here
(1) the output of the query below
Select name
floor (space_limit/1024/1024) "size MB"
ceil (space_used/1024/1024) "used MB"
v $ recovery_file_dest
by name
/Which is physically free space to mount point? Because the views are logical...
(2) SQL > archive log list
(3) SQL > show parameter db_reco
Expiry of logs archiving or expired backups?
RMAN > delete all. expired archivelog
Thank you.
-
Hello
I get this investment very error in 10G. My 12 GB Flash recovery area size. 10G I found there are a lot of files to archive log generating. Why this is the case, is it possible to minimize this log files.
This makes me to have a single resource to monitor this log files. Please help in this regard.
Thank you and best regards,
Delphine KThere will be 4 or more "automatic" jobs you'd see in DBA_SCHEDULER_JOBS
AUTO_SPACE_ADVISOR_JOB
FGR$ AUTOPURGE_JOB - this one probably is not running
GATHER_STATS_JOB
PURGE_LOG(for example query: {color: #ff9900} select job_name, run_count, last_start_date, last_run_duration from dba_scheduler_jobs order by 2;) {color})
A job can be disabled with
sys.dbms_scheduler.disable exec (' '< owner >'.) "< job name >"'); -
I have a SBRIO system with an isolated supply
http://www.NI.com/PDF/manuals/375052c.PDF
It is said on page 15, all connections of Earth GND D AI, AO, connected internally to the earth terminal.
the negative terminal of the power of the J3 connector is also grounded internally?
I have a system mounted on a box aluminuim, which owns the land on the Earth, and also the supply, which is used to power the sbrio gives voltage isolated, but now if the negative terminal of the J3 connector has an internal connection with the holes and the spade of Earth, how can I use my isolated power supply with the negative terminal is not connected to the ground its main power supply the connection output not the soil Earth domain controller.
I can't open my system sbrio jury at that time to check directly.
can you please help if negative - ve terminal J3 power connector is connected internally to the ground lug and mounting holes.
Thank you
Hi Freemason.
I think I just you send an email in this regard, but to confirm, Yes, connector J3 is connected to earth ground in-house. You should still be able to use your power for the sbRIO.
Best,
Dan N
Technical sales engineer
National Instruments
-
Connect the power supply for NI UMI 7772
Hi friends,
I'm trying to connect a UMI-7772 on P70530 drive to control a stepper motor
It is written in the manual that came with UMI - 7772, that: after connection + 24V terminal lead and ve - V to Terminal C, V terminal must be connected on V_iso C connector for terminal C_iso. I was wondering if that means I have really physically connect terminal V V_iso and C_iso terminal C on the NI UMI-7772 map?
The question arose because it seems unnecessary to make the external connection, it could have been easily connected internally to the plant itself?
Thank you
With respect,
Partha
Partha,
Viso and CISO are used to power external systems such as switches and sensor detection and fault (I highly recommend the use of an emergency stop switch). The 24 v supply is used to power the UMI himself. If the external circuit uses a different voltage of 24V, you can define Viso to this voltage (in the range of 5V to 30V). If you do not switch/sensor external, you must connect as you said in your post, you can always power external devices, but they are not isolated from the internal circuits UMI you can meet ground loop problems. The connection is not made in-House have isolated the available power source.
Ben
-
has obtained a new wireless network and I can not connect the printer to it.
I have a photosmart c4780 wireless. Got a new Airport Express Wireless yesterday. It is connected to my MacBook Pro without problem, but I can't get the printer to connect to it.
I have a MacBook Pro, OS v. 10.6. My HP Photosmart C4780 worked perfectly on my old system wireless (Apple product). Yesterday I bought a new wireless Airport Express and I can't get the printer to recognize the new system. Where it shows the name of the printer in the system, the box below (called location) is empty. I tried to put the name of my Airport in it, but no luck. I know it just needs to be connected internally somehow, but can't find where the information goes. I don't have a USB port. The printer is connected to a modem, and the modem is connected to the radio (is this is what is called the router?) Airport Express - just like it was yesterday when he was working with my old wireless.
-
GPO applied to laptops when not directly connected to the network?
OK, I have a question that should be easy.
Are Group Policy objects applied even when a computer (such as a laptop) is not connected to your internal network?
So if I had a laptop that is used normally on my internal network, and then I bring home, Group Policy objects that affect the laptop when I am connected internally, still influence the laptop when I am at home? Thank you!
WJ
To be honest, you will get a more complete answer on the Technet site.
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
"BOLD" of blackBerry Smartphones connect internet not, BBM, email
Hello forum!
This morning my Blackberry Bold 9000 worked very well, I've had into Web pages and had also received emails. Something went wrong somewhere during the last four hours.
I first noticed I wasn't getting emails, and then when I went to try internet it wouldn't connect either. The error message for emails is 'impossible to contact service' and for the internet, it's just can not connect at all (most recently the small icon blackberry disappears an hour after a hard reset, then the internet says 'network coverage not sufficient to process your request. Please try again later. »)
I tried all (pull hard, return the service directories, check the routing table host, check to ensure that the data are enabled) and I was on the phone with AT & T and nothing works. I was hoping that's a service issue at their end, but they tell me that doesn't seem to be the case.
Can anyone please help me or point me in the right direction?
http://www.BlackBerryForums.com/General-9000-series-discussion-bold/173229-bold-wont-connect-interne... -C' is exactly what I saw! would it be a hardware issue even if this morning the phone was fine?
Any advice would be much appreciated thank you!
I give it an hour or two and try EVERYTHING that once again... Powered ON the battery pull, service books, etc.
There is probably a local problem of ATT.
Maybe you are looking for
-
When I select a photo from any website by clicking right, popup options. But the option "Save as" does not work.
-
I can't seem to find a new tab page as an option, the change.
The button square with a +, used to open a new tab. It brings me to find facemoods. How can I change this to... maybe Google. I don't see an option to change this in the options.
-
service host process windows error and error of bad image with diasymreader.dll
I recently got a computer(windows_xp).i plugged card reader and unfortunately, I opened movies (host process for windows services). This is the only mistake made by me.there after, as I begin my computer a dialog titled FORM 1. whereupon my computer
-
My computer is stuck in "updates to configuration 3 3 0% complete" loop.
My computer is stuck in "updates to configuration 3 3 0% complete" loop. I tried to go into safe mode, but it does not start in safe mode. I don't have a vista cd and cannot work, how to get a dell stop as my warranty has expired. What I have read on
-
Registration or driver issue.
I had just downloaded "RegWork" and did a scan. The DVD player still turns but does not read.