Load the HP Factory Defaults

Similar Questions

• Need to load the form No. Default RadioButton (checkbox)

  Through this useful forum, I learned how to override a group of checkboxes, radio buttons, when I wanted to force either / selection for an or/no answer Yes. But now it seems that this will necessitate that I put one or the other be the default response. I much prefer to require the user to look AT the issue a little more carefully, and then select one or the other. All I need is to have NO box when the form loads, then once an answer is selected, resume normal radiobutton - type operation. Help? Thank you.  -Kip

  You have your buttons set up according to the needs. Note that for both the option 'Button is checked by default' is not selected. Now all you have to do is to reset the form and it should work as you want. To reset the form, you can set up a button with an action to reset the form, or select "forms > clear form.

• FOUR installed at the factory DEFAULT to leave prevents the DUAL BOOT LINUX

  HP laptop: dv7-4173us

  Current hard disk partitions:

  Size (approximate) volume file system status

  (C primary NTFS Partition 444 GB)

  HP_TOOLS (F): 99 MB primary FAT32 Partition

  Recovery (D primary NTFS Partition 21,28 GB)

  Primary SYSTEM NTFS partition 199 MB

  I came across this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-disk-management-UTI...

  I want to install linux in dual boot, but the link above from Microsoft, said a MAXIMUM of

  4 PRIMARY partitions is allowed.

  Currently I already have FOUR primary partitions on my laptop HP as factory default PARTITION!

  What is the SYSTEM partition?

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-boot-partitions#1TC=Windows-7

  Excerpts:

  “.... The system partition contains the hardware and the startup folder indicating a computer where to look to start Windows. By default, Windows 7 creates a separate system partition when it is installed from scratch (as opposed to upgrading from a previous version of Windows) on an unpartitioned hard disk. This partition is 100 MB in size. “

  Looks like I need to remove one of the main partition above.

  And it also looks like my choices are:

  HP_TOOLS (F): 99 MB primary FAT32 Partition

  Recovery (D primary NTFS Partition 21,28 GB)

  What are the consequences of the removal of one of the scores of HP.

  I suspect the HP_TOOLS above (F and recovery (D are dependent on each other.))

  I understand, it's likely that I lose the ability to recover and have to reinstall windows directly from CD/DVD.

  But I have TO install Linux in DUAL BOOT.

  What choices do I have?

  Please advice.

  Thank you.

  hpng wrote:

  I finally got to work, including by using:

  https://help.Ubuntu.com/community/boot-repair

  Hoot Hoot!

  In install Ubuntu LTS 14.04, it allows to installtion of lights-out auto side by side.

  I noticed that the (NTFS, FAT32) file type is not displayed for the Ubuntu partition in the disk of wind 7 management.

  So, what is its file type?

  There are two Win 7 bootloader when the laptop starts.

  Here's the boot options for dual booting:

  Ubuntu

  Advanced options for Ubuntu

  The memory test.

  The memory test.

  Windows 7 (loader on dev/sda1)

  Windows 7 (loader on dev/sda2)

  First boot of Win 7.

  When I select the 2nd choice (last), I got error "Info: the boot selection has no b ' cos a required device is not accessible."

  Which partition is dev/sda2 corresponds to?

  How will I know?

  I also tried to delete the partition HP_TOOLS after successful install Ubuntu and dual boot,

  but WIn 7 has said it is currently in use, and force the deletion can cause problem.

  What should I do?

  Thanks for all the help.

  Linux uses a different label than Windows. Windows using C, D, E... drive, but linux uses sda1, sda2, sda3 (sda means the disc and 1,2,3, partition) labels for partitions. The sda2 partition is probably the 100 MB system. Linux also uses different file systems incompatible with NTFS/FAT32 for Windows file systems. The most common are EXT2/3/4 and also swap which is something like a pagefile (pagefile.sys) on Windows. You can delete the partition HP_TOOLS of linux, but if everything works and you do not need more partitions don't do that. There are stored diagnostic utilities. However, you can create a USB key with the same properties as HP_TOOLS partition:

  http://support.HP.com/us-en/document/c03801890

• where is the button located size lithium battery. I want to upgrade my camera to factory default

  because I can't delete or remove photos from my camera that I am trying to reset to factory default.  I can't find the battery lithium button size to do so.  Help

  where is the battery located on my sony cybershot camera 16.2 megapixels that it will not load

• Is it possible to set Firefox to load complete sites by default rather than mobile sites all the time?

  I would like Firefox mobile to load the sites full automatically instead of mobile sites by default and have then check the website box full load.
  Any suggestions?

  Hello mabok01, you could try with this addon: https://addons.mozilla.org/android/addon/desktop-by-default (I had to exit the application once and restart it after the installation of the addon is taken into account)

• I did the security two-step for iPad.  Apple support is a restoration that took it back to factory default.  Now I have nothing in iCloud I can find, photos, notes etc.what can I do to get back them.  They are still on my iPhone 5 s

  I have an Air of iPad and iPhone 5 s.  I did the two-step verification and wrote the secret code 4 digit.  I couldn't get into my iPad.  Talked to about 4 Apple technicians.  They guided me to restore my iPad to factory default.  My photos and notes and videos have disappeared.  They are still on my phone.  I never went to iCloud to see hat is here.  My iPad has said there is nothing in the iCloud shouldn't the same thing that is on my phone.  I went to Verizon and they said it was a problem for apple.  Help!

  You need start the game up more so that we can see if you have a backup, you can restore from. Go to settings > general > reset > erase all content and settings so that you get the Hello screen. Then, you configure the iPad, sign your iCloud account and when asked if you want to restore from a backup to say Yes and see what is listed to choose from for restoration.

  After the back if you don't see any options for restoring your backup.

  See you soon,.

  GB

• I returned my iPhone5 to factory default and gave it to my granddaughter.  She wants to download games etc but the itunes store guard asking my ID and PW.  How can she save herself?  I received and email to say that PW tried to reset

  I returned my iPhone5 to factory default and gave it to my grand daughter as a Christmas gift.

  • She wants to download games etc but the itunes store guard asking my ID and PW.
  • How can she save herself?
  • I received and Apple to say that someone had tried to reset my password by e-mail.
  • It is probably her mother because she also asked me to tell him my PW and ID.
  • I currently use my PW and ID on my new 1Phone6 and do not want to share this.

  Can you please help.

  Julie Bateman

  She needs to log out of your Apple ID in the store and just connect with hers. Go to settings, iTunes and App Store and tap on the Apple ID, then select Disconnect.

• Cannot create the backup by default factory

  Hello! I have a laptop with Windows 10 ASPIRE E 15 (E5-552-T84G). I want to create a backup of factory default. However, after pressing the "Get started" button in the center of Acer care, only a window with the text "Please wait" and a running progress bar is displayed. Nothing else happens even if I wait for a long time. Is this normal? How long should I wait?

  Looks like you have to give him at least a half hour.

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• I reinstalled windows vista to factory default and during the analysis of the registry errors found 1395 errors

  I reinstalled windows vista to factory default and when parsing registry errors with norton utilities found errors in 1395. what I would do. I have to fix all the mistakes.

  Hi mohdrafi,.

  No need to panic. If you used another registry, cleaner, we could see 2000, 3000 or 4000 even depedning errors that the registry search cleaner. Registry cleaners are so reliable that I wouldn't even recommend them. In fact you don't need a registry cleaner and, contrary to popular reports, your registry "is not" increased cleaning performance. Registry cleaners are noted for the provision of many "false positives" it makes you wonder if the registry cleaner is saying 'what the devil I know, just delete this and the other and hope everything works eventually. My advice? Forget the registry cleaning!

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• «Go back to the factory default» deletes all documents and data personal?

  I'm selling my laptop, so return to the factory default. Someone can always retrieve driver information? Thank you.

  Moved to virus & malware

  Original title: Is 'back to factory default' totally Virgin pilot?

  Sorry I misread your message. As says factory setting puts your computer in the State in which it was when it left the factory. However, a person determined using equipment may be able to retrieve the information you make refers to.  There is a software that allows to avoid this.  For example, CCleaner has a facility that erase the drive.  But again this is not a 100% solution. The only 100% is to destroy the hard drive.  Having said all that I don't worry about this unless you have sensitive information on your computer, or there is very incriminating information stored on your computer.

  PS: If you think about it, you will understand that when you delete something on your computer you are not really delete, everything you do delete the index.  The information remains until it is crushed and even in this case, certain information may be recoverable.

• Reset the factory default ssd is a sure way to wipe ssd

  Using Windows7 64 bit, I have an option when reformatting a SSD (Kingston 64 GB V series with trim support) reset to factory default. Is that what will happen a secure erase so that I can sell the car without the risk of someone access to my personal information such as banking details online?

  Thank you

  Alan

  Hey AlanTaylor_854,

  To answer your question Yes Alan, when you wipe a SSD or 'format' you erase all the information out of him, so that your personal information will no longer be on this disk.

  I hope that this was the answer you are looking for.
  Thanks for posting of Microsoft Answers!

• Get the values of default table row when the page loads

  Hello

  I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.

  I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.

  Steve

  Steve,

  Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?

  In any case, if you're after the execution of methods on the loading of the page, you will find the links below.

  If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).

  https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to

  Advice from the Oracle Johny: ADF: how to run the ViewObject with a ViewCriteria on the PageLoad in Application Web ADF

  It will be useful.

  See you soon

  AJ

• Files Management tab does not appear in the import module. I think that I have configured some settings but am unable to change. I restored the factory default preferences, removed and reinstalled on Macbook, but they are always there for example allow du

  I am new to Lightroom and I followed a guide that allowed me to set import preferences. Now I want to change them, and although I see them in the import dialog box small I don't see a "File management" tab at any time. I have reset factory default in the preferences and removed and re-installed on my Macbook, but they are still there.

  Any advice would be much appreciated as I'm looking for guides and forums but did not find any specific help. Thank you.

  Click on apply when importing

  You see file handling

  If so just select

  

  Hope this helps

  Assani

• Sites Internet slow to load, the steam is horrible...

  Maybe two weeks Firefox has ceased to be usable for me. Web sites are slow to load, and if I, for example, listening to audio streams in a single window and load one Web page to another, the sound cuts. If I'm watching a video, the version low resolution will load and will buffer, play a little and then set buffer again. It's like using dialup. At first I thought it was a network problem. I restarted but still no luck. Then I tried Safari, and everything is just as fast as it should. For some reason any Firefox thinks that I have a slow network. Anyone know what is happening? Thank you.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!