Logging off CC 2015 also disconnects CS6?

Similar Questions

• Computer not finding networks, stuck on the Logging Off screen in Vista

  For the past two weeks, if I simply close my laptop while it is running, most of the time when I try to open it up my wireless network does not connect automatically. I have to click 'Connect to' in my Start menu and manually connect to the network. The only problem is, sometimes it will fail to find a network and when I try to manually go to 'Connect to', it does nothing. Nothing comes up at all. I have to restart my computer. Once I try to restart, it sticks on the screen "Logging Off". I also tried to disconnect just opened a session back, but it's still stuck on this screen. I am then forced to make a hard closed down by holding down the power button.

  Any ideas?

  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Hello
   
  1. you broadcast the SSID of the wireless network?
  2. have you idea of changing the settings of the preferred wireless networks?
   
  Method 1.
  Try to change the order in which your computer connects to the network.
  The list of networks connected to before is sometimes referred to as your preferred wireless networks or your preferred list.
  a. open manage wireless networks by clicking the Start button, click Control Panel, click Network and Internet, click Network and sharing Center, and then, in the left pane, click on manage wireless networks.
  b. your saved wireless networks is displayed. To change the order in which your computer connects to networks, drag the networks upwards or downwards in the list.
  c. to change preferences for the network, right-click the network, and then click Properties.
   
  Method 2.
  Also, check out the articles below and check.
  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx
  http://support.Microsoft.com/default.aspx/KB/929661
  
  Method 3.
  Also the question of trial in the State of clean boot and check. You can also check the shutdown problems in the boot.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 4.
  Also check the eventviewer on stop error logs.
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Ntuser.dat locked by system after log off

  tons of stuff on the internet about this but no real difficulty. We currently use roaming profiles on a 2 k 3 Server for our Citrix configuration. We met the issue of temporary profiles created because the ntuser.dat file is locked by the system in their ordinary account profile. This has actually been a problem for several years to the contract and I am now cleaning.

  We have the GPO to set to point to a share to store profile data, refers to the configuration of the roaming profile.

  first thing I noticed was tons of SID keys under HKLM\Software\Microsoft\Windows NT\Current Version\Profile list. I deleted all these keys and profiles on the servers of applications under Docs & settings. now on the first login my account has been created on the server, SID created key. after disconnection of application, he removed key SID in the registry, writes data to the profile on hand but profile left on application server because ntuser.dat has been locked. then, the next time you connect, it starts to create profiles of temperature.

  Maybe it's a little much info for the real problem at hand, but I wanted to explain the Setup here incase it helps.

  does anyone have a solution for this?
  UPHClean is not an option because we use roaming profiles. they are always locked.

  or does anyone have a script that I could use that force a version of the log off?

  any info would be much appreciated. Thank you guys

  Hello

  You can ask your question in the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/home

  Thank you.

• Windows Vista - stuck on logging off the screen

  I have this same problem with Vista Home Premium that others have had.  When I tried to shut down the computer laptop last night, he is stuck at logging off-page - with the active circle always renewable.  After 20 minutes or so I was tired so close by using the power button.  This morning when I turned on the laptop, he went to the same page of disconnection. 3 hours later, it's still there!  My technical knowledge is, to say the least, "limited."  I tried to open safe restart mode and pressing F8, as suggested on other threads, but which didn't work - I can not go beyond the logging off the screen. How can I solve this?

  I had the same problem... This method works.

  Turn on the computer and when the screen shows recovery Windows press the space key.

  You will be presented with 2 options - either to continue with system resume or to remove the Hibernation file and start with primer system - choose the second option - you're fixed!

• Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

  At all to being able to help solve these problems successfully:

  When I bought my office, it came preloaded with Win XP (a FANATASTIC/s o!) with an installation disc free for Vista Home Premium. I have installed Vista until recently due to support XP being more available.

  Problems currently on a regular basis (every reboot) are:

  (1) long startup (sometimes nearly 10 minutes)

  (2) the "Blacktop" (AERO) Vista appears generally "gray" (like Win Classic) but with VERY little
  Services (icons missing, unable to run diagnostic programs, etc.).

  In this situation, I usually 'Log Off' and 'Connect' again and it fixes the problem-"bitumen".
  is back with the functions of the al. Despite this, I'll restart desktop using Services.msc. for all the functions

  are available.

  System information:

  (A) AMD 64 Athlon 3500 + (2.20 GHz)
  (B) 3.00 GB RAM
  (C) Vista 32 Bit (SP1 and SP2 installed (all updates current)
  (D) ATI Radeon XPress 200 Series (current driver)
  (E) all drivers are current (no changes required)
  (F) update BIOS (not not required)

  Note:

  (1) I am the user ONLY if the 'Default' options are regularly 'Log In' (as admin) - no guest accounts, etc.

  (2) I reduced some Desktop effects, which are not necessary (Menu Fade in and out, etc.) according to

  instructions of MSFT community on how to do this and what is safe to disable. This helped a little
  and I don't miss these features.

  (2) I deleted the "Windows.old" folder (as there was nothing to add to the Vista o/s).

  (3) I have NOT deleted the Partition which was part of the Win XP System Restore feature as)
  "I don't know if I should as well as to think that I should keep this system offline and running XP).

  (4) I use a security program that securely wipes deleted data, cache password, etc..
  Under Win XP, there was the possibility of "Protect Restore Points" (not required for Vista).
  I do NOT use the option "delete shadow copies".

  My questions are:

  (A) what is the cause of the boot extended both office and how to tackle it successfully?

  (B) what is the problem with the desktop computer? I don't mind the Log in and out a lot but would like to get rid
  me of this disadvantage.  I would like TO have the Vista boot WITHOUT having to Log in and out to

  ensure that the AERO desktop is available and functional.

  (C) should I delete the files and restore Partition in Win XP? Is this the cause may be a conflict with
  Vista? Also, please let know us if you think it would be better to keep these files available if no
  conflicts are possible or probable.

  (D) what is the path, the file name or folder (path if necessary) which governs the entire desktop
  (startup, appearance, services, etc.). so I can enter my security software to exclude it from
  be affected?

  Thank you in advance for any help you can offer.

  Incidentally - for all owners of Scanner Epson 1200U running Vista Service Pack 2:

  YES! Successfully, you CAN install and run this scanner on Vista with the EPSON Twain 5.53 driver without twisting your registry, etc.

  Steps to follow:

  (1) download the file of v5.53 (10245.exe) driver TWAIN Epson

  2) extract to the folder (default location or a location of choice) and open the folder

  (3) right click on the "Setup.exe" file, go to properties and set the compatibility to Win XP SP-2

  (4) run the configuration file and wait for Windows Vista to give up the search on the web, ignore the 'warning' when he

  comes to the top and connect the scanner to complete installation as you did under Win XP (or earlier versions)

  NOTE: You will have to wait a long TIME for the next window appears once complete Vista

  research on the web. It seems that the reason why a lot of Vista with the Epson 1200U Scanner users are

  running out of patience, that it was my problem-so, the Eureka moment happened!

  My camera works great! The only loss is you open TWAIN in the application, is not
  automatically start more. This may be fixable, but I'm glad it works and I don't know enough to make the necessary changes in the registry, etc.

  Thanks again for your help!

  try to use MS-FIXIT

  http://support.Microsoft.com/mats/slow_windows_performance/

  If that didn't help, then maybe you would not survive the installation completely, and you will have to reinstall vista with updates it's still once, don't worry, it happens to all peoples.

• Vista will not register, the computer crashes with log off

  Computer crashes with log off of Vista.

  Hello

  Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
  on closed session, restart, or stop. Those who do this will be often blocks that you met.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I remove "Log Off" from the Start Menu?

  The Shut Down window includes Log Off option, and I accidentally disconnected when I did not.

  Hello

  You are using the classic Start Menu?

  Check if one of the steps helps you accomplish the task.

  Step 1: Remove the option of logging for the Normal Boot Menu.

  a. click the Start button, type gpedit.msc and press ENTER.
  b. click User Configuration > administrative templates > Start Menu and taskbar.
  c. double click on logout remove from the Start Menu.
  d. Select enable and click on the OK button.

  Step 2: Remove Logoff to the Start Menu classic option.

  a. click the Start button, type gpedit.msc and press ENTER.
  b. click User Configuration > administrative templates > Start Menu and taskbar.
  c. double-click Add Logoff to the Start Menu.
  d. Select Disable and click the OK button.

• Create and add a message in the log off screen on a Windows 7 PC

  Original title: Log Off Message

  Hi, I was wondering if it is possible to create and add a message in the newspaper off the screen of a Windows 7 PC

  I searched and found only information on adding text in the log to the screen. This text will include the verbiage "Don't forget your USB."

  You can use a script to logoff to do, which is a file that runs automatically when the computer disconnects. http://TechNet.Microsoft.com/en-us/library/cc753583.aspx

• Remove Windows 7 Log Off button

  Hello. How can I remove the logout button in the Menu start Windows 7 Professional? I already disabled Shutdown, lock and SwitchUser, but for some reason, I can't remove the Logoff button.

  I have already tried using gpedit and regedit, but somehow, it's still there and I can still click on it.

  Another way I have not yet tried?

  Hi C,

  Don't know what you have tried in the registry, but here is the solution. You can simply run the compiled registry change or make the changes manually. Here's how:

  Delete in the registry:

  1. download the file edit registry at the following address:removestartmenulogoff

  2. double-click on the registry file, and then click Yes to the confirmation message.

  3. restart your machine to see the change.

  Or, if you prefer that this can be done manually:

  1. Type "regedit" in Start menu, right click and choose "Run as Administrator".

  2. navigate to the following key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  3. in the right pane, create a new DWORD value namedStartMenuLogOff and set the value to '1 '.

  4. close the registry

  5 restart the machine

  Reference:

  http://www.intowindows.com/how-to-removedisable-log-off-entry-on-Windows-7-start-menu/

  * Note: Also the walk through this link register also provides an additional option to remove log off via Group Policy.

  (If this post wasHelpful ("useful Vote") or response ("brand that answer") your question, please click on the corresponding button to help others find the answer more quickly.) Besides, if you feel that someone else has been useful, mark them too. Also, if you have any othercomments please let us know.)

  Hope this helps,

  Steve <> Microsoft Partner

• Computer freezes on logging off the screen.

  Our computer required a restart of the system, we have followed all the instructions (computer restored last time it updated) & was able to connect and find our computer in a normal state.

  Then told us to restart. The computer is now frozen on the screen "logging off". What does that mean?
  original title: frozen on the screen "logout".
  Hello
  1. why the ' computer required a reboot of the system?
  2 have you made any changes to the computer before the show?
  3. you are working on a domain environment?
   
  Method 1:
  If you have external devices attached to the computer, I you recommend trying to disconnect and then try to shut down the computer.
  Method 2:
  Step 1:
  You can try to use the power button to turn off the computer and then try to start at startup and check if the problem persists:
  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.
  Follow this link provided below to start your computer in safe mode.
  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  Step 2:
  If it works fine in safe mode, and then perform a clean boot.
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  Method 3:
  You can update the drivers and application software by visiting the manufacturer's Web site.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
  I hope this helps!

• Close, do NOT restart, Firefox, WITHOUT reboot (or log off) Windows.

  I want to stop, NOT reboot, all open Firefox windows and tabs, WITHOUT reboot (or log off) Windows. That's all. Thank you.

  Have you tried one of them:

  • the orange button Firefox > output
  • File menu > exit

  If Firefox does not correctly close, he may be suspended during the cleaning process. This article has a few suggestions for this: Firefox crashes or does not - how to fix.

• Satellite M200 won't stop "Logging off."... »

  Model: Toshiba Satellite M200
  OS: Windows Vista Home Basic

  Problem: I tried to restart the computer and it will not stop "Logging off."... "I tried to turn the computer off and restarting, but every time I restart it I always get the «Off login» window... "and the turning circle that indicates that he is still trying to close the session.

  I would be grateful for any advice on how to close the bloody thing and restart. And, no, I don't have a boot on my disk but have access to a PC so that I could download and burn a.

  TIA

  I think that it s something wrong with the operating system on your laptop
  And in this case the new resettlement would help to solve such problems small system.

  > And, no, I don't have a boot on my disk but have access to a PC so that I could download and burn a.
  I put t know why your laptop did not with the Toshiba Recovery CD, but it would be desirable to restore it to factory settings in order to check whether it is useful or not.

  Good luck

• Windows Vista hanging at "Logging Off" of the prcoess judgment stage.

  At the stop, Windows went to automatically install updates and shut down my Dell portable computer. But he is now stuck at the step "Logging Off" and not shut down, even after hours. When I stopped manually and restart, it just goes back to the "Logging Off" screen and I can't do anything else. Several shops here have said they need to do a thorough cleaning of the hard repair disk in order.  Really? Is there another way to get the computer to block this process?  Thank you.

  Amanda,
  If you are still having this problem then validate with what version of Windows you are using.  First thing to try is to start on the Advanced Boot options , and select the last known good configuration.  If this does not work, then try to start safe mode.  Let us know the status.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I closed my Windows Vista computer, it reached the "Logging Off" screen and seems stuck.

  Sporadically, when I turned off my computer, it reached the "Logging Off" screen and seems stuck.  I walked away from my computer for a returned more than an hour to find the screen always showing "Logging Off" with the small circle in the middle of spinning.  The only way I can close down is to do it manually and then when I use the computer at a later date, I ger the message that my computer has been shut down improperly and I should log in safe mode.  This happened only since I upgraded to Windows Vista.  My computer is a Toshiba laptop Satellite P105-S6147.

  original title: Shutting Down computer

  Hello

  Please, try the suggestions made by the former MVP Malkeleah in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-stuck-at-logging-off-screen-after-trying/d99659e2-03d4-4b18-b3f1-cba3a438f07e