lose sound at idle

Similar Questions

• Have a HD Sony Wega KDF E60A20 TV that loses sound and image for a bout a minute then comes o

  Have a HD Sony Wega KDF E60A20 TV that loses the sound and picture for a bout a minute then light up again.

  I'm sorry to hear what is happening with your TV. I need more information about the problem you are having with the unit. When the TV loses sound and the image is there any light that flashes on the control panel of your TV (e.g. lamp, timer or power)? What is the video source connected to the TV?

  Follow the steps below to troubleshoot the TV.

  A power reset.

  1 turn off the TV.
  2. unplug the power cord of the TV from the power outlet.
  3. let the TV remain without power for 60 seconds.
  4 plug the power cord into the power outlet.
  5. turn on the TV.

  If the problem persists, try to pull up the TV menu when the sound and the image is lost, just press the Wega door button on the supplied remote control. See the menu? Note If there is no light, which will blink on the Panel of the TV when the problem occurs.

  If my post answered your question, please mark it as an "accepted Solution".

• Windows 7 and Bose Companion 5 speaker system lose sound intermittently.

  I use Windows 7 Ultimate RC, bought the version complete, simply have not yet installed.  I also use speakers Bose Companion 5.  Card mother Asus M3A79-T Deluxe and an AMD Phenom II processor.  My problem is this, my speakers work for a period of time, usually less than a day, then all of a sudden they'll stop working, is in the middle of playing World of Warcraft, viewing a video, whatever, all of a sudden they just stop working.  The speakers are still reported by default in the sound settings and remain are worth in the hardware Manager, I can unplug the USB and plug it back and he presents himself as the work, etc. but no sound until I restart the computer.  I do not use a hub and have tried different ports, please help.  I read around other people have problems with the function of ' cool n quiet AMD acting, but mine is disabled by default in the bios and I also ran the AMD power monitor, the two have no effect, I always lose her completely and randomly.

  None of this works... the problem still exists.  I thought I had resolved in the power settings... If you go to advanced there is a place to turn off USB, select suspend settings, it worked for 3 days this time before deciding to just turns off again.  Anything that you can do to watch it all would be appreciated.

  You encounter a driver problem, and the only real solution is a driver of his best. You should keep control of driver updates, if you want to use the devuice in Windows 7.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• T520 loses sound after sleep

  Hello

  I recently bought a T520 and have problems with the sound. When the computer goes to sleep, then is resumed I lose the output of the sound card. When I check the sound properties in the Control Panel, everything seems OK, but no sound is output from the speakers. The volume is about half.

  Sound card: 20672 Conexant SmartAudio HD

  Sound card drivers version: 8.32.18.0

  It is the latest version according to Lenovo System Update.

  Deactivation and activation of the device in Device Manager do not help.

  Any ideas?

  @benc,

  Latest driver for the T520 should be 8.32.23.0.

  Try to update and see if it helps.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-76999

  JMT

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.

• Toshiba 40L6353D lose sound on HD channels at random

  TV is around the age of 18 months and recently started losing sound/volume cut on HD channels. If you turn off, then back on it comes back for a while, or if you simply change channel it comes... Not sure if it is just the HD, but it seems to be.

  Can anyone help? I tried a firmware update, but he said: it is up to date, I tried a technical support via the Toshiba site, but I guess becaause that's old, they can't stand it anymore...

  Thank you all.

  Hello Leigh

  Can you please confirm if this problem is still present, as the broadcaster make some changes by region, so it might take awhile to roll out to all users

  WBR

• Loser sound/image during rewind Live TV in Media Center

  Using Windows 7 and Media Center, upgrade to Windows Vista.

  All other parts of the Media Center seem to work normally.

  I can watch Live TV very well, but if I hit the back of chapter button to go back a few seconds, it works for the first two clicks, but then the screen goes black (the preview window and timeline always functions at the bottom of the screen).

  If I have wind and then forward to the current zone 'live', picture returns but with no sound. Need to get Live TV to get her back.

  The machine is used only for Media Center, but also installed PowerDVD.

  The back of the net...

  Hi Dylan Tusler,.
  Registry warning

  
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
  
  Find and delete these two registry keys and restart to fix the problem:
   
  [EntVersion entVersion\Media Center\Extensibility\Entry Points\ {7e7a8710-9e4a-40a3-824a-7b0baf38abcf}]
   
  [EntVersion entVersion\Media Center\Extensibility\Applications\ {a0cd8951-e5b6-4662-9c9c-d56c5b38ca59}]
  
  
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Lose sound and resolution

  Hello

  All in one shot, I lost sound completely and since last night, I also lost the resolution too and now I work with very weak graphics and no noise at all.

  There are many other functions that I can't use more for example, I can't download a video recorded.

  I would be grateful if you can help me.

  Thank you very much.

  Fareed Saiepour
  removed phone number *.

  Hello

  · Were there any changes made on the computer before the show?

  · What is the service pack installed?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  You can also check the link: no sound in Windows: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• (GER) SWF loading and lose sound

  It is the same project, but I feel that these two issues could be addressed in the same way. I have for sovereign wealth funds, let's call them 'Main' and 'Challenge '. Challenge has its all, except one, exported for that in the first picture, as I have several ACEs triggered events (onSoundComplete) that moves the read head. However, the size of the file became a little big (about 6 M), so we have added an external preloader, but now the sounds do not play. Similarly, 'Hand' calls for the 'challenge' for level1 after an onRelease, and audio also went to compeltely. So we are back to square one and try to understand if the preloader should be incorporated in the "challenge", but also to avoid the issue with her challenged level1 above 'hand '.
  
  How to do this? Help!

  When you create your sound instance, replace

  var something: Sound = new Sound()

  with

  var something: Sound = new Sound (this)

• With Vista Home Premium, I lose sound to my Linksys Extender when Iplay internet tv. No problem on my pc or i-player. Thank you

  Extender on wired network thro smc 11n router modem. Have you tried linkingextender Sony wihHDMI TV and non-digital led with the same result. Grateful for any suggestion
  iangs

  Hello iangs,

  I suggest that you post your question on the Greenbutton forum which is a forum dedicated to this topic for a better answer to your question. Here is a link that you can follow to ask your question:

  http://thegreenbutton.com/forums/

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Sound on boot to top... turn crackling, distorted and then no sound

  Hello

  I hope someone could shed some light on my sound problems. My sound started to do. I turn on the computer and the sound seems to work very well, and then after using the computer a bit, the sounds can range from the crackling or distorted and then off. Sometimes, but rarely, the sound will come back from time to time.
  I can restart and the sound is back again... or I can both lose sound, reinstall the driver and I have sound, until the same thing happens.
  I installed the most recent driver, direct x, the windows media player 10. I have a toshiba mobile phone running windows xp. I have install recently more... two ram 512 chips, different brands.

  best buy think my motherboard can go...
  any ideas?

  Hello dawn

  It's very strange question. I've never heard of this. Unfortunately, I have no explanation for it, but I can't imagine that it is caused by the wrong driver or something like that. In any case, you can try and remove the sound card in Device Manager, then restart the device. Operating system detects hardware and install the driver.

  Otherwise, maybe is it some problem with connections and the sound is just sometimes.

  As I have already said, it's very strange question. I am very interested in this topic and if you have a solution please let me know.

• HP IPS 25es monitor: does anyone know how to prevent my monitor of pop sounds?

  bought this monitor from best buy a few weeks, connected via HDMI on my desk. I had read a little about my question, but had not found a solution and had read that HDMI sometimes has a problem with the sounds of monitor

  If it is not really a solution, just noises and its not the damage goes, I guess that the sounds are not so bad

  I tried to disable audio monitor via windows reading devices, noise will pass anyway.

  the noises are usually a pop sound, but sometimes (I think upward) is more than a crack, like a sound of house-settling

  I also turn off during the night because sometimes POPS are bad for my bed time (it always appears in mode 'sleep')

  Hi there @poppop25,

  That the Forums are with you!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your screen speakers make different sounds when idle.  I'm happy to help you with this.

  Start by: monitors flat panel HP - troubleshooting with the monitor speakers sound problems. Also make sure that your display drivers are up-to-date. HP 25es 25 inches

  You must also make sure that all drivers on your computer are also updated.

  If the problem persists, try again through these institutions: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers. They can help to isolate or remove possible software or a driver issue that could be causing the problem.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• T520 sound stops working when HP Monitor is connected

  Hi all

  Any help would be great. I have a new T520 and a new external monitor (HP ZR2440w).

  As soon as I plug the DisplayPort connection, I lost the sound on my laptop. I also lose sound through the headphone jack.

  Please help thanks.

  BR, K

  He probably forwarded to the monitor. The view port manages sound and video.

  This monitor have speakers? If so, you should hear him on them.

  Regarding configuration differently. I don't have the installer to experiment.

• Sound of my laptop HP continues to spoil

  My laptop sound continues to spoil after a while. I'll play the songs on YouTube and after awhile it stops for like a second and then comes back but plays sound when idling but everything else, other that sound is working at normal speed. Is there any fix to what I can do on my laptop, or what I need to get the laptop?

  Hey HmmZack,

  Thank you for the information. To begin troubleshooting to hopefully solve your noise problem. Please follow the steps in the document No. sound from speakers (Windows 8) . Now, I know that's not exactly the problem you are experiencing, but the steps still works for your particular issue.

  Please let me know if the audio troubleshooting cannot find any problems, but also what is the result of the troubleshooting steps.

  Looking forward to your reply!

• No sound from the computer with connected generic speakers VISTA SP2. Symbol pregnant shows active with the Digital Audio device.

  I have vista SP2, I connected to generic stereo speakers using the green light at the back of the computer. Vista does not recognize the speakers. The speaker symbol at the bottom right shows "digital (HDMI) 2 high definition output audio device." It shows active. I had this problem before, and VISTA should pick up 'speakers' something to that effect. I have no sound until it captures "speakers". I can't get VISTA to recognize this. It keeps starting with the digital audio device. Don't know what to do, checked all the forums. It should just pick up these simple generic markets good speakers. Before SP2, I lose sound when VISTA is in standby mode. He would then turn off the stereo speaker and replace the digital output device driver... However since SP2 I can't get VISTA to recognize that I have just connected speakers and not a digital output device.

  Yes, when I uninstalled the driver, THEN shut down the computer and then restarted, he picked up the device high definition audio "speakers" good pilot is NOT the

  "digital (HDMI) 2 high definition audio output device that he used to pick up."

  I now have sound!

  I hope that it stores the right driver now as in the past, when VISTA went into sleep mode, it will disable the speakers, and you have to restart every time.

  Thanks for your help.

  You can add instructions to boumediene, the fact that you must RESTART your computer to search for new drivers, once you uninstall.