Lost Connection using the Magic Mouse

Similar Questions

• I tried to use the magic mouse with macbook pro and it froze the computer. Help?

  my screen is now frozen as "Welcome to Office: Mac - I can't use the computer despite stopping repeatedly.

  You can try resetting the smu or zapping the pram, faling that, try to boot from the recovery partition (close, and then press command + R while re-booting (.)) Instructions on how to do the 2 first things found on Apple's site, if you are lazy like me, google works fine, too

  Good luck

  John b

• Using the wireless mouse at startup

  Hello

  I use iCloud account so El Capitan requires me to connect to the startup.

  I bought a new mouse (associated without a dongle) wireless that I would use to select the user to the login screen, but it does not work.  Can I use another mouse with a dongle, or I can use the magic mouse (which is a point of total sale).

  I use a Logitech MX Anywhere 2.  Once I log in, it works perfectly.  Any ideas?

  MacBook Pro 13 early 2015

  I found this on their Web site. Not sure if this can help. http://support.logitech.com/en_ca/article/Connect-the-MX-Anywhere-2-mouse-to-a-B luetooth-device? product = a0qi0000008tB99AAE #mac_osx

  Kim

• the magic Mouse loses connection

  I have an iMac 21.5 "running 10.11.6. Recently, I added a to an existing stereo system bluetooth connectivity so I could broadcast on the system. By the way since then I lose my connection to the mouse. I get "connection lost" notification even if the mouse is sitting idle without hands even near him. I tried the suggested pieces of paper, battery replacement and any other thing, I found displayed. Nothing works. As I was typing that I got the message several times, and I'm not even using the mouse! I have another computer in another location and plan to try to see if the problem changes switching. I suspected that the additional bluetooth device could be the culprit, but I tried to unplug and had the same results. It is not a problem with another computer running the same operating system, even if a year or two older hardware. The intermittent mouse problem existed before, but I've lived with him because he doesn't seem to be that bad. Now, I have moved and am in an apartment complex and wonder if there is an interference cause me pain. I do not know to replace the mouse by a non Apple device can solve the problem or if I need to use a WIRED one remedy! The keyboard has never given me problems and with the exception of the low battery notification, it has worked perfectly.

  Hello...

  May be corrupted Bluetooth preferences.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/com. Apple.Bluetooth.plist

  Click OK, and then place the com.apple.Bluetooth.plist file in the trash.

  Can it match the Magic Mouse > OS X El Capitan: use an Apple wireless mouse

  If this does not help, because you are having problems with the battery, Reset System Management Controller (SMC)

• the Magic Mouse that came with my iMac to work but it does not recognize HP USB Wireless Mouse

  the Magic Mouse that came with my iMac to work. I tried to use the HP USB mouse that I use with my MacBook Pro at home, but it does not recognize. I went into the settings but it only sees the mouse Magic Mouse.  I tried configuring it as a PC mouse.  How to recognize the USB of the computer mouse.  I need a HP bluetooth mouse?  I can't work with this mouse, it has a funny scroll for it. It is too fast or too slow.  Help!

  < published by host >

  There is no reason why the iMac should not be able to use a USB mouse. With the mouse connected to the computer off the computer tower and turn it back on. Now it doesn't recognize the mouse? If this is not the case, try a SMC reset.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Sensitivity of the magic mouse 2

  OS X 10.11.3 (15 d 21) model name: iMac model identifier: iMac14, 2 name of the processor: Intel Core i5

  I recently changed to a Magic Mouse 2 and it worked perfectly. Recently the sensitivity seems nave has increased as evidenced by the fact that I have to hover over a link to activate it. How to restore to original operation?

  Hi DCRIOW,

  If you want to adjust the settings of your Magic Mouse 2, take a look at the resource below to adjust the settings in system preferences.

  Using system preferences

  Preferences system systemic control ("global" settings) and is available in the Apple () menu in the upper-left corner of the screen. Preferences system allows you to set things like your resolution screen, keyboard, mouse, sound, taken the printer settings, settings, accounts and more sharing.

  Customize your mouse

  The preferences panel mouse look different depending on what type of mouse you are using. These settings allow you to set the mouse sensitivity to control how quickly the pointer moves on your screen when you move your mouse, and adjust your double-click reflexes. Other controls may be available, depending on the type of mouse you are using.

  

  1. In the Apple Menu, open system preferences.
  2. Choose View > mouse, or click on the mouse icon.
  3. To control the speed of the pointer (cursor) moves across your screen when you move the mouse, click on Point & click and use the tracking slider to adjust the speed.
  4. If double-click speed if poster, you can use the double-click slider to adjust the speed.
  5. To change the action settings, click the tab more moves. You can enable and disable the gestures for blow and the Mission control.

  Configure your Apple wireless devices

  Mouse Magic 2, Magic Keyboard, Magic Trackpad 2

  Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

  1. Connect the lightning to USB cable to the port of lightning on the device and plug the other end of the cable to your Mac.
  2. Make sure the switch is in position I. (Green will be visible).
  3. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
  4. The Bluetooth Preferences window shows the status and costs connecting your device. When the device is charged, unplug it for wireless use.

  Note: The Magic Mouse 2 unusable when you are connected to the cable.

  Take care

• Pair magic keyboard or the magic mouse 2 with multiple Macs

  We have two El Capitan 10.11.3 running MacBook Air.  We have an office for a docking configuration environment / clamshell with an external monitor, a keyboard of magic and Magic Mouse 2.  As one of us needs to use this office Installer, anchor us the MacBook and then use the Magic Keyboard and Magic Mouse 2.  However, whenever a MacBook is exchanged, we must re-pair the mouse and the keyboard using the connector of the lightning, because the Exchange system throws a 'unsuccessful connection. Please connect the device again. "error.

  These two devices are unable to maintain matching configurations to multiple Macs?  I read several reviews on this site that describes how to join multiple Macs using the mouse Magic Mouse and wireless keyboard.  It would be very disappointing if this feature has been ruled out.  In fact, let's make these devices if this is the case.  We understand devices does not simultaneously connect to two Macs, and it would be nice if we did not re-pairing through lightning connector whenever we swapped the laptop used in the office,

  Thank you!

  You can only pair you with one device at a time. They are not multi-user features. You can use on a single computer at a time.

• The magic mouse disconnects all working

  Everything working on my Macbook Pro connection bluetooth magic mouse stops every now and then on his own. I have to wait a few seconds before clicking on, reconnect the mouse. It looks like a period of connection, but I can't find an entry in the system preferences, where I can fix this.

  Asked a solution in some Apple stores, a.s.o. iCentres, but nobody has an answer that solves the problem. Someone at - it an idea? The problem started with the implementation of Yosemite.

  As you have upgraded to El Capitan, you are unlikely to achieve the full functionality with your mouse A1296.   The magic mouse 2 has been designed to work with El Capitan and superior and is now generally available.

• the magic mouse 2 must remain always on?

  I have an iMac nine of the end of 2015. Y at - it recommendations to maintain in good condition the keyboard mouse Magic 2 and magic that comes with it?

  I tried to find answers in the documentation of the iMac, but cannot find anything. So my question is: should I turn off my magic mouse 2 everytime I turn on my computer? Or should it remain always on? (same question goes for the magic keyboard)

  Thanks in advance for your answers!

  Zhinyuu,

  https://manuals.info.Apple.com/manuals/1000/MA1739/en_US/magic-Mouse2-Userguide. PDF

  Note: When you are not using your Magic Mouse 2, he falls asleep to save batteries. If you do not use your mouse for an extended period, it goes o to save even more.

  follow https://manuals.info.Apple.com/manuals/1000/MA1738/en_US/magic-keyboard-UserGuid

  Note: When you are not using the magic keyboard, he falls asleep to save batteries. If you do not use your keyboard for an extended period, it goes o to save even more.

  

• Green flashing light on the Magic Mouse

  I thought that a green light flashing on the Magic Mouse 1 (not rechargeable), means that the necessary batteries replaced or recharged.  I put new batteries in, and yet the green light continues to blink.  This is a new mouse, sent to replace their defective Magic Mouse.  The defective mouse works, but I can't get the new one to work.  I can't get support to help me with this. I tried to use the conversation, and they have disconnected while I was writing my question. RRR

  Anthony,

  Look at my answer to the other thread.   It may be better to keep all questions here at the moment.   The other thread is no longer.

• The magic mouse 2 works with iPAD PRO

  The magic mouse 2 works with iPAD PRO?

  No, you cannot use a mouse with an iPad.

• HH.exe crashes - lost connection to the online help and Support window

  HH.exe crashes - lost connection to the online help and Support window

  SYSTEMATICALLY, FOR MONTHS, WHEN I SEARCH WINDOWS HELP I got THE MESSAGE.

  "You have lost your connection using Windows and Support website. . Try to connect again. "
   

  Windows Error Reporting shows several times:

  1. HH.exe hangs and does communicate with Windows
  2. MsSearch TerminateProcess & #x000d
  3. ApphelpSoftBlock & x000d #.

  I have no problem connecting to Windows Web sites otherwise or to other sites on the web.

  Can someone tell me how to fix this?

  (I'm running VISTA 32 bit)

  Hello

   
  This behavior is caused by a corrupted or damaged HH. DAT file.
  
  This may occur if Antivirus or a firewall, you have installed the program it blocks.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• HP DV6T-1300 lost connectivity to the internet, error display 701

  I have a laptop HP DV6T - 1300 Entertainment who has lost connectivity to the internet, and it displays error 701. All of my diagnostic checks, I think that he has lost the pilot because he does not have a wireless card. I downloaded the drivers wireless (five each) HP support and assumes that the Realtek driver is the original. What is the purpose of all other drivers (Broadcom, Atheros, Wireless & Bluetooth Pro) and they need to be installed or not? They are updated day or improvements or are drivers for the other cards in different models of this computer? I use the laptop for my wife to access the net until I fix this. Thanks in advance!

  After that to install the Realtek driver (original), I discovered that the software does not recognize that there is a wireless card. In my view, the map is part of the motherboard and may have failed. I suspect that my best solution may be to buy an external wireless card and install it. Any suggestions?

  I don't know exactly what happened, but after restarting a couple of times, the wireless card started working again. He works actually better than what he has. The downloaded driver was an updated version, and this may explain the improvement.

  Different cards for different models of different computers in your model class.  You only need the driver for your system.

  The updated driver for your model of correction probably your problem.  The fact that it works better than before is, of course, a plus.

  If you don't already have it, here is the wireless connection manager:

  HP sp54945 V4.1.25.1 Connection Manager

   

  Connecting to a network with the 4.x connection manager

   

   

  For your reading pleasure:
  

  Domestic use Wireless-G and Wireless-N devices on a network

   

   

• Unable to connect using the current password

  Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
  Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?

  Unable to connect using the current password

  It is far from a complete problem description.
  Please explain in detail

  • what you were doing
  • That's happened

  Using the current password which only had 6 characters

  6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.