'Lost connectivity to storage device' on a SAS controller is installed locally?

Similar Questions

• Loss of connectivity to storage device

  It seems that I get one of them at least once a day.  A few times the data store is unknown and other times told me the name of servers.  I have 4 servers in my cluster, all Dell and an EqualLogic iSCSI SAN.  I'm really at a loss about why it continues to be.

  Loss of connectivity to storage device

  NAA.6090a028d0d00181588b241d3c7352b1. road

  vmhba33:C0:T25:l0 is down. Affected

  data warehouses: unknown.

  error

  2009-09-20 14:47:02

  Hi Chris:

  Make sure that you have configured according to the PDF attached things EQL. There have been some changes of VI3.5 regarding the iSCSI configuration and initiator software was completely re-written in vSphere. For example, multiple paths is a little different, and they recommend you actually have a vmkernel port for each physical NIC and that substitute you the failover parameters. You are or ESX servers can be remove connections that the volume rational access EQL moving to different Eth interfaces on the controller (just a thought). This is explained in the document.

  There is also a video cool tech that goes along with the document. http://www.EqualLogic.com/ResourceCenter/video.aspx?ID=8455

  Let me know if it helps!

  Dave

• E3000 - frequent lost connectivity to wireless devices

  Hello, recently installed E3000, very happy with it. But began to notice that my iPad and Galaxy phone sometimes seem to lose their Wi - Fi connection. Always, they indicate both the Wi - Fi to the E3000 is good, but any attempt to navigate or run of network applications just hangs. I don't notice the problem while I am with them, when I pick up after a few hours or a day. Turn off the devices and retry them cleared up the issue, but not the way it should be. Any suggestions greatly appreciated. Thank you, John

  Thanks for the explanation as well as the detailed proposal.  I made the simplest changes first: renamed the SSID for the 2.4 and 5 GHz bands, and each of them to channels 6 and 48 pegged respectively.

  Smartphones found 2.4 GHz links, but I was pleasantly surprised to see the iPad find the two bands (different SSID) and wait for me to choose who to connect through.  Nice to see.

  I'll give it a few days and then look in the rest of the solution if I need, or to accept it as resolved.  Thank you!

• USB Mass storage device drivers software has not been installed successfully

  Auto install usb drivers fail

  Hello

  * You are able to get USB devices working in one of your USB ports?

  In addition, please see the following link for steps on how to perform a clean boot on your system to see if this clears this can cause this problem.
  Here is the article that lists the steps to perform a clean boot on your system:
  http://support.Microsoft.com/kb/929135

  Post back and let us know what you are able to find out by performing a clean boot on your system and if all your drivers are up to date and up to date.

  Kind regards
  Clement Kumar. Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Deletion of data (step by step) USB storage device

  I need to know how correctly, step by step, remove a usb port connected data storage device. I am currently using, Windows visit Home Premium. Thank you...

  By the clock in the bottom right notification area, you will find an icon. Hovering over it said something like 'remove hardware safely '.

  Double click on this button.

  Find the usb storage device in the hardware list.
  Select this device.
  Click on stop / remove safely

  Wait until you receive a notification that can be removed.
  Remove the USB port.
  If so, you can now safely unplug unit from wall outlet as well.

  I hope this helps.

• storage devices does not

  I use win 7. whenever I connect a storage device that is to say a USB key or an external hard drive, it falls under the category not SPECIFIED in devices and printers. But my xbox 360 controller works fine. I also tried to uninstall the device in Device Manager, but it is not uninstalled. Help, please

  Information about this could do the trick. See:

  My external hard drive is "not specified." I want to just copy - Microsoft Community
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/my-external-hard-drive-is-unspecified-i-just-want/d0a89bd7-E231-4c04-8c50-652ebfd1451c

• How to display the list of never installed or connected storage devices

  Original title: list of installed storage devices

  Is there a way to get the list of already installed or connected storage devices?
  I know that I can use USB and USBSTOR branches registry for these purposes. Is there something like that for CD/DVD, HARD disk drives?

  I guess the device driver installation and connection events are recorded somewhere, but I don't know where to find this information.

  Sorry for my English.

  Hello

  You can check the link provided below for more information on what information appears in Event Viewer in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  To the event viewer Windows XP Click on the link below.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx

• lost a storage device and you want to search the computer for 2 weeks ago word documents

  How can I searc this computer for MS Word files that after an hour, would be in the location of recent Documents, but it has been 2 weeks? Please and thank you... Advice will be useful as I am computer illiterate.

  Hi BenDempsey,
   
  -Were the files saved in the external storage device or in the computer?
   
  Method 1: If the document was saved earlier on the computer, follow these steps and check if it helps you to find the file.
   
  a. you are able to locate the document in the "My recent Documents" list, right-click on the file and click Properties.
  b. on the general tab, check the location of the file and open the documents from there.
   

  Method 2: You can also use the search function and check for the image on your computer.

  How to search for files and folders in Windows XP

  More information on:

  Windows XP Search Assistant it is faster

  If the document has been saved on the storage device that you have lost, you can't find the file on your computer.

• XP SP3 cannot remove Windows Update: ITE - other hardware - UMass Storage Device (330). Causes BSOD when connecting memory card reader.

  Ativa AT-52N13 card reader worked fine until I installed the update from the window: ITE-other hardware - UMass Storage Device (330).  As soon as the card reader is connected I get a BSOD: BAD_POOL_CALLER.  Windows stopped not to damage your computer.

  Stop: 0x000000C2, 0 x 00000007, 0x000000CD4, 0 x 02040001, 0x8996A808

  The update is not listed in Add / Remove programs.  I don't know which driver I should delete.   Ativa, Office Depot, does not list the drivers for this device on their website and have been zero help.  Cannot find how to remove this update of any resource of Microsoft.  Any help would be appreciated.

  Windows XP device drivers using beats BSOD
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_july09.mspx

  Tip: Only get required updated driver from the download page of the manufacturer of the computer or device, NEVER of Windows Update (i.e., hide driver updates available through Windows Update).

• A storage device is connected.

  I bought a HP Pavilion dv3000 laptop in February 2009 and am getting irritated now with a repeated warning that keeps popping up every few minutes.

  The ball says:

  "A storage device has been connected. If this device is a port multiplier, only port 0 port multiplier will be active. »

  Is this a problem? or can it be solved.

  Help, please.

  Maybe it works for you...

  First update Your Bios to the latest version from here.

  How to do?

  You plug the adapter to the computer.

  Disconnect from the internet. Turn off any antivirus and firewalls.

  Start the update of the Bios. It may take some time. Do not turn off your laptop, unplug ac and don't do anything on this subject during this update is running.

  Follow these steps below only what evolution of the Bios do not solve your problem.

  Find in menu start Intel Matrix Storage Manager and run it. Choose help he-> on the program. This way you know what version you have here now. If it is 8.0.0.1039 has then this version is also on your model site here.

  Uninstall Intel Matrix... and try to reinstall it from this link I gave you. Even if it's the same version.

  When the problem will always appear then uninstall it again, download and install this version of the Intel site.

• Windows Explorer in Windows 7 restart when the storage device is connected

  Well actually, I have Windows 7 Professional running on my netbook and every time I connect a mass storage device (for example, my phone, external Hard Drive etc), Windows Explorer keeps restarting.

  I have MSE running, and there is no virus in it.

  Anyone can do more about this light? / Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are able to access the data in the device of storage without any problem?

  Follow the steps mentioned below.

   

  Step 1:

  I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the boot options.

  b. Select safe mode from the menu and press ENTER.

  For more information, see the article mentioned below.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  Perform a clean boot and see if the problem is resolved.

  Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Step 3:

  I suggest you to scan your system for viruses and malware using a care Microsoft and Microsoft security essentials. Check the links below.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security_essentials/

  If you think that it is a file that is infected, then I suggest you to quarantine or delete it from the system.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

  I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

  The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

  When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

  For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

  I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

  This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

  My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

  Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

  Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

  I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

  I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

  I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

  EDIT:

  Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

  In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

  Thanks for any help.

• How can I prevent users to connect to a USB storage device?

  I would like to block the connection to a device of USB storage except adminisator account?

  Referring to the following link, there are no instructions on how to do it.

  Anyone have any suggestions on how to do this in Windows 7?
  Thanks in advance for your suggestions :>

  http://support.Microsoft.com/kb/823732

  You need to remove the menu setup USB device, as if it was never installed. Physically

  Remove the USB device - run USBDeview and remove it - Reboot - then set up the
  Users do not allow a USB - reboot and you connect as a user - NO ADMIN - try to insert
  the device.

  You can get more ideas on the TechNet forums I listed previously.

  You have really need professional or above to be able to set security policies.

  Rob - SpiritX

• Transcend storage device when connected gives error "Windows has stopped this device because it has reported problems. (Code 43) »

  Original title: Windows has stopped this device because it has reported problems. (Code 43) ».

  Hi, I have a storage device 'Transcend', but when I connect it it gives me "Windows has stopped this device because it has reported problems. (Code 43) »

  . in the last ididnt have had problems with this unit. what I can do.

  Shirly

  Hello

  1. What is the brand and model of the device of Transcend storage?

  2. other USB devices work on your computer?

  Error code 43 indicates that one of the motors controlling the unit notified the operating system that the device failed in some way.

  Method 1:

  Step 1:

  I suggest you try plug the storage device Transcend to another computer and check if it works.

  Step 2:

  Also, try to connect the Transcend storage device on another USB port and check if it's work (which you know are working perfectly).

  Method 2:

  You can run the diagnostic Fixit tool. Check out the following link.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  You can check after uninstalling and reinstalling the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  Note: the information provided in the article mentioned above are applicable to Windows 7 too.

  Method 4:

  You can try to install the latest drivers for the storage device Transcend on the manufacturing site and check if it helps. Check out the following link.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = ws.10) .aspx

  It will be useful.

• Laptop HP Pavilion: mass storage device problems

  I have a 1 TB mypassport mass storage device connected to the computer.  When I access the camera or only 32 MB of storage is displayed. You go to properties and looks like it is partitioned and do not show the capacity of all of the device I'm so lost

  I discovered what had happened. I had put off the hard for the recovery of the system and, in so doing, so blocked 32 MB disk and the rest was just let go. I had to go back and assign a new drive for the rest of the unused portion. I always learn something... Thank you all.