Lost the driver when restart
I use an all-in-one Deskjet 3052 a on Windows 7-64 bit laptop. Whenever I put in Hibernate or stop, when I start again I have to reload the driver for this printer. Does anyone have a solution?
Well, you should read your manual routers and change check/change some settings. Check the start and end range IP DHCP from the router and then change the IP address of the printer is not inside this window.
Printer does not keep the wireless connection.
http://support.HP.com/us-en/document/c02817031
Step 6 to set the static IP address.
Tags: HP Printers
Similar Questions
-
Original title: windows media problems
Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,If you restart WMP when this problem occurs, which helps?
It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:
-
Satellite 1800-354 is unable to load the driver when it is turned off during the night
Hi could sombodu help me to solve this problem.
My laptop wives is unable to load the driver when its been delivered overnight. It's normal runs when the drivers installed and when it was turned off for about a half hour.
The laptop has windows xp sp2, the card is a belkin f5d7010 802.11 g and I downloaded the latest drivers for it. Thank you louis.Hello
This driver is the problem for the PCMCIA port or wireless network card?
Good bye
-
Original title: Dell Printer 966 all in one
Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?
Sam SolimanE-mail address is removed from the privacy *.You shouldn't if you get it from Dell.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error
- I have a HP officejet V40 and have lost the driver cd could you let me know an address where I can download a free driver for this please?
- Thank you very much
- Andydeee.,.
- Recent changes to your computer
- What you have already tried to solve the problem
Go to the above link > click your printer model > then your particular operating system > and then the HP reading tips.
See you soon.
Mick Murphy - Microsoft partner
-
Webcam, I lost the driver disk
I have a web cam but I lost the driver disk, on my desk I plug it into a usb port and it appears on my devices like a web cam, now this is fine, but how can I make it work?
OT:
Cam sex
I have a web cam but I lost the driver disk, on my desk I plug it into a usb port and it appears on my devices like a web cam, now this is fine, but how can I make it work?
Hello
Access the site of the manufacturer of the webcam (Logitech, etc.) > get your Webcam model number > and then the operating system > download and install the drivers/software for this.
See you soon.
-
I lost the driver for my USB 2.0 - CRW. Any idea where I can download it?
I lost the driver for the USB 2.0 - CRW. I think that his is a Realtek and the software is version 6.1.8400.39030, but I can't find it anywhere to download. Any ideas?
Hi Ian,
Thanks for posting your question on the Microsoft community forums.
I understand you are trying to install the USB 2.0 - CRW drivers. Check out the link and download the drivers designed for Windows 7.
http://www.DriverMax.com/driver/update/USB/compatible-USB-storage-device/USB2.0-CRW/436978
You can install the drivers in Windows 7 in Windows 8 by using compatibility mode. Follow the steps.
(a) access to the start screen
(b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)
(c) search for Troubleshooting, click settings in the right-hand column.
(d) click on troubleshooting. Click run programs made for previous versions of Windows
(e) click on Next, select not listed. Click Next
(f) click Browse and select the installation program that you downloaded via the link above.
(g) click on Next, click program troubleshooting
(h) check the program worked in earlier versions of Windows but won't install or run now
(i) click next , select the latest OS known functional for this driver (probably Windows 7)
(j) click Next
Let us know if you need assistance.
-
Computer will not use the drive when you restart.
I have a Pavilion dv 9000 and had problems more and more lately (win explorer fails, application launcher fail, blue screens, crashes etc.).
I decided to use the recovery disk that was created at first boot. According to all the manuals that I found (on - and offline), it is just to put the recovery disk in the DVD-ROM and restart.
The problem is that nothing happens. The computer does not use the disk when it reboots.
Anyone experienced the same problem with the recovery disk?
I'm not having any other problems with the ROM, works perfektly once Windows is running.
Thank you
You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I'm trying to:
1. download the rtexe on the target in real time
2. download the file or - rt.ini of the RT target on the local disk
3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
4. download the ini file edited to target RT
5 reset
6. the new rtexe should start to runWhen manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.
However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.
When I try to reconnect, he said:
"Errors were detected in the log of the target when connecting to the target:
LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »
Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?
If there is an easier process or to achieve this goal, please suggest.
Thank you
Problem solved. Problem was never in the INI file.
Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.
-
I can't connect to the Internet, because none of the network drivers are showing. I'll use this for Microsoft Flight Simulator so what card Ethernet buy to install or usb wireless driver do I need to buy to install. The current Ethernet is built-in to the motherboard. The number on the Ethernet Jack real housing is p53-153-11z9, and it's a salmon motherboard.
Hello:
I compressed upwards and tied the ethernet driver that shows support for the hardware ID you have validated, below.
You will need to manually install the driver as follows...
Download and uncompress the file that I attached to his record. Do nothing with the files in the folder.
Go to Device Manager and click on the ethernet controller requiring driver.
Click on the driver tab, click on set to update driver.
Select her browse my computer for driver software option and navigate to the folder you unzipped.
Make sure that the include subfolders is selected, and I hope that the driver will be installed.
Then restart the PC and see if you have network connectivity.
-
I want to copy pictures on a DVD. The first step is to format the drive. I followed the instructions online and insert a disc in the CD, DVD player and I continue to get a message that tells me to insert a disc when there is already one in there. If I remove the disc and try again, I get the same message.
Hi Ronald Danilowicz,.
1. When did you start to question?
2. you remember to make changes to the computer before this problem?
3. this happens with a specific disk, or all?
I suggest you try the fix it from the link given below and check if it helps.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Hope the helps of information.
-
Invites to insert the disc in the drive when you try to copy photos on CD - R or DVD + R
COPY OF PHOTOGRAPHERS SENT BY E-MAIL ON A CD - R OR DVD + R
I'm trying to copy photos that have been sent by e-mail to me on a drive. What is the right way to do this? When I think close to execution of this task, I got my disc is ejected and it tells me to insert the disc in the drive? What I am doing wrong?
I'm trying to copy photos that have been sent by e-mail to me on a drive. What is the right way to do this? When I think close to execution of this task, I got my disc is ejected and it tells me to insert the disc in the drive? What I am doing wrong?
===========================================
If you copied (recorded) the photos in a folder on your hard drive?The following article is maybe worth a visit:
Windows Vista-
Burn pictures or videos to a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVDIf this does not work... the following link may be worth a visit:
Windows Vista Solution Center
http://support.Microsoft.com/ph/11732#TAB0
(scroll to the bottom and select: "your CD or DVD drive cannot read or write media")Good luck...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Lost the video when the transition from XP to Windows 7
After the Upgrade from Windows XP to Windows 7, I lost the video. Upgrade is not completely finished, but I can't do anything to fix the problem I have no display. I need to go back to XP or difficulty somehow the video from the command prompt. What can I do?
How to uninstall Windows 7:
http://support.Microsoft.com/kb/971762How to uninstall Windows 7 by using the Windows.old folder:
http://support.Microsoft.com/kb/971760 -
I bought a Packard bell Imedia mc pcworld 1608 in 2005 it had windows xp edition already downloaded to the media center computer. I have recently been in need of pc unfortunately when I load it it requires up to the bootable discs which I lost. I still have my product key and other information. is that what I can do to get back on this machine without buying a new windows disk.
Have you tried to contact Packard Bell for a replacement CD?
Also some computer come with a "recovery Partition" on the disk, see your owner's manual. Try typing the key F11 repeatedly when first start you / turn on the computer.
J W Stuart: http://www.pagestart.com
-
I installed windows and now whenever I try to play a song or anything it says no audio device detected. I go to the control panel and verify it says multimedia audio controller not working do not. so I reinstall yhe driver and my computer restarts during the installation.
Hello joshuap79,
Thank you for visiting the Microsoft answers community.
What drivers are you using?
There is a topic on HP about the drivers for your model: click here
Hope this helps Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
115 - p189na vs 15-p189sa? : Pavilion 15-p189na Notebook vs laptop 15-p189sa Pavilion
What is the difference between HP Pavilion Notebook 15 - p189na and HP Pavilion 15 - computer p189sa laptop?
-
If I create a new partition (partition storage) to store my default programs, files, images, and music. Will be wipe my files if I do the recovery to remove spam and viruses (and maleware + spyware)?
-
SX50HS - a photo stitching problem.
I tried to open PhotoStitch and upload the photo and it will not accept them. I downloaded pictures of "My pictures" and "Windows Live Photo Gallery", who accept the photo and then copy and paste of PhotoStitch. PhotoStitch will not accept the comman
-
What happens with the support of the seller now?
After a year on the world of BB, my last update of the app was rejected for a mention of a competitor device, including the help, even if this text is in the HelpFile for the app was introduced a year ago. I had several problems with the notice of re
-
Photoshop element is suddenly incompatible with Windows 7
How can I use this program now. It worked a month ago and I had it isn't install the update in Windows 7 pro