low speed on dvd by mast * a uj - 841 s writing

Similar Questions

• Satellite P100 GPU fan turns costantly at low speed?

  Finally something strange happened on my laptop and I wonder if even happened to other users of P100 series laptop. All of the sudden GPU fan began to operate at low speed all the time. Before he reached 60 ° C and then had shrapnel short until it cooled down to 50 ° C and the order. But now it runs at very low speeds and temperatures are around 48 C. It is not noticeable and I'm very happy with what (it should be like that from the start).

  Now I wonder what could have triggered that. Do you have bios that has changed (I have the latest 2.40). At the beginning when I changed the computer bios worked as before, but then at some point I changed muffler in performance mode and since that day, the GPU fan runs constantly. I tried to change it to silent mode, but the GPU fan runs all the time. My laptop is P100-115 (Geforce 7600)

  Hello

  Looks like you re a happy with the use of the fan.
  I think that the new BIOS has been changed and that's why he has better influence on the performance of cooling module and so it works at very low speed. I think it is much better than the rotation of the fan restless.

  As you have already mentioned the Toshiba power saver controls the speed of the CPU and cooling method. If these settings could affect the cooling of laptop.
  But believe me; It of much better to have the constant low temperature and fans completely.

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• Satellite A100 - 192 Windows Vista USB low speed

  Hello

  I installed vista on A100-192, I configured everything correctly, all the drivers installed, but the USB transfer speed is totally low and when hollow transfring usb I have sound and video form. / CPU usage is 100 percent when data transfer from my camera or compact flash. Same thing with the PCMCIA card.
  On windows xp, it worked great!
  I guess it's something about drivers, because when I connect my hard drive usb hollow it works very well/windows sees it as a hard drive, but when I connect something else, and windows sees it as a removable drive - about low speed starts :/

  Any idea on how to solve this problem?

  Best regards
  Krystian

  Hello

  do you have what drivers installed? That you have downloaded the drivers, have you downloaded the correct drivers? Sorry for my question, but I'm sometimes on certain things and then I can't explain the errors that are produced.

  Welcome them

• Low speed on Wireless N

  I'm trying to implement a DV6 on Wireless N. I have a Linksys WRT160N router and get speeds up to 120mbps on a desktop wireless located near 100 feet from the router. I can not get over 54 Mbps on the laptop, even within 10 feet. I checked the properties of the device and verified that the width of the channel is set to AUTO and 802.11n Mode is ENABLED. I noticed the rest of my system below specs. Any help would be appreciated.

  LAPTOP MODEL: HP DV6

  Operating systems: Windows 7 (64-bit)

  RAM: 4 GB

  WiFi ADAPTER: Intel WiFi Link 1000 BGN

  PILOT: 13.0.0.107

  ROUTER: Linksys WRT160N

  FIRMWARE: 3.0.02

  After much research, I believe I have solved the problems with the Wireless N of low speeds, especially with Intel WiFi Link 1000 BGN configurations. Here's what I could learn from Intel support forums.

  "The IEEE * 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast encryption algorithm." If you use these methods of encryption (WEP, WPA-TKIP), your rate will be reduced to 54 Mbit / s. Intel® WiMAX/WiFi Link 5350, Intel® WiMAX/WiFi Link 5150, Intel® WiFi Link 5300, Intel® WiFi Link 5100, Intel® WiFi Link 1000, and Intel® Wireless WiFi Link 4965AGN client drivers connect using a legacy IEEE 802.11 g connection rather than failing to connect altogether which complies with the IEEE 802.11n draft standard. "This means that you must use a connection Wi - Fi Protected Access * (WPA2-AES or WPA2-TKIP).

  I have reset the wireless security on my router to use WPA2-AES, reconfigured my laptop for the same security settings and options was immediately connected to more than 200 Mbit/s.

• Where to ask for the CD/DVD CS5 Master Collection

  Where can I ask for the CD/DVD CS5 Master Collection?  I intend reformatting a computer, but miss me a cd in my old install files. I always have a working serial code. I tried to download the file, but really perfer a CD/DVD since I keep making mistakes and my internet connection is not the greatest. Any help would be great. Thank you. I heard that the CDs for the CS5 master collection are only $9.95?

  -47034 http://prodesigntools.com/All-Adobe-CS5-Direct-Download-Links.html/comment-page-19#Comment

  You can not buy old records of software via adobe.

  You can either purchase through a third party or adobe download.

• DVD of Satellite M70 of burning low speed

  Hello world

  I bought my laptop a few months there, it's a Satellite M70 which has a stack * a UJ - 841S of speed which registration should be around 8 x, but I can't check greater than 1.2 X on DVD and 8 X on CD, it takes me 40 minutes to record a DVD, can someone help me?

  Is there an update for this?

  Thanks in advance

  Hi Diogo

  The DVD writer is not the only factor that determines how fast the media must be written. I'm sure you know it depends on media itself and burning software too.

  Have you tried to use DVD media to check the burn speed? I recommend you to use well known as TDK DVD producers. I use it for a long time with different burners and until now never had no problem and the speed of combustion was always declared on DVDs.

• Low speed according to Bredbandskollen (2, 47 MB) instead of 13, 14 Mb

  Hello
  I get to low accelerated according to bredbandskollen.se 2, 47MBs, but with
  Google Crome I get 13, 14MBs. have a FF 14.0 beta now but the same problem. What to do at the speed it uo?
  Regards Carl

  You can check the problems caused by a recent update of Flash 11.3.

  • https://support.Mozilla.org/KB/Flash-113-doesn ' t-charge-video-firefox

  What security (firewall, antivirus) software do you have?

• Can speeds of DVD - I play slower pre-recorded DVD - Satellite P20 801

  I have a Satellite P20 801. I think to buy a DVD burner, so I can transfer VHS to DVD hardware. If I recorded it at a slower speed, would I be able to play on my laptop? How can I tell if the DVD on the P20 player can play different rhythms - assuming that's possible?

  Thank you.

  Hello

  As far as I know that the recording speed is not relevant for play. You can save on the minimum or maximum speed DVD and the DVD can be played on your P20. My previous laptop was P20 and I never had no problem with this.

  Good bye

• DV6 6c65se: hp pavilion dv6 6c65se RAM update more low-speed clock frequency

  Hi I dedided to chenage my original RAM memory to a

  Corsair CMSX8GX3M2A1600C9 NB Vengeance 8 GB (2x4gb) 1600 MHz CL9 DDR3 SO-DIMM two memory Module Kit Performance

  When I changed to RAMto a new and restart a system, I was surprised the classification System went down from 7.6 to 7.4 could someone explain to me why this happened if the old RAM was unbraned in trouble from China? Why my new performance as Corsair is defined by the hardware to work on the low clock speed, also is there nothing in the BIOS to change the clock speed of RAm etc.

  Could someone help me in this regard?

  Thank you

  Hello:

  I can't tell you why the performance of WEI memory went down, but he certainly wouldn't.

  The faster the memory will run in your computer laptop is 1333 MHz, because it is the fastest speed of the processor i7-2670QM FSB can run to, so installation PC3-12800 (1600) memory provides no advantage.

  The original memory regardless who did, should have been 1333 MHz.

  You need a PC with an Intel 7 series chipset and the 3rd generation of processor core to memory to operate at its rated 1600 MHz.

• Satellite L500-19 X - what speed of DVD should I use?

  Having just bought a laptop, as above I am faced the question of how fast DVD to use.
  John Lewis PC after sales help service advised me that time 16 DVD sometimes causes trouble and I should get 8 X and use them if possible even if they say they are now almost as rare a hens teeth. Say them a 16 X can be OK but X 8 would be more reliable.

  I have not started my laptop but as am waiting for supply of X 8 I found on Ebay as recommended DVD-R NOT + should be used. I see that the disc tray is marked rewritable + leading to more confusion.

  Make a copy of the operating system upon receipt of the X 8 and not before.

  All advice or comments would be most appreciated

  For a long time, I always use the same DVD and I have never, but never really noticed some problems burning, especially not to create recovery media.
  I use TDK DVD-R 1-16 x speed empty media.

• Hello! I have a laptop HP Compaq 6730 s with a windows XP SP2 OS. I need help with my drive burning/writing speed CD/DVD and its ability to play DVD. __

  There an Optiac DVD RW AD-7561 pilot. Before it used to have a 8 X read speed and a 8 X write speed, I can see via NERO everytime I have will burn a DVD. But now the writing speed has become 2 X and therefore more adjustable from a NERO software. And also I tried to burn a DVD every time, he finished but it does'nt displays data that has been burnt at all... I already tried to uninstall this software, rebooted and installing it, thinking that this might well be the cause of the problem, but it's always the same. I even tried to install Roxio 9, hoping that this will solve the problem, but it still shows the same write speed 2 X... His ability to read and burn to a CD is fine, but the problem is when it comes to DVD's just makes a strange noise and takes a long time before displaying the content of the DVD and its ability to burn a data file on a DVD...

  Before this problem occurred, I remember I have inserted a DVD and tried to copy paste its content on my desktop. But while the copy is in progress, I accidentally typed on the eject button while trying to reach for my cell phone, which was placed next to the my laptop cd/dvd drive.

  IM desperate and I need an experts'advise on what to do...

  Thanking you in advance,
  Kirby baki
  KSA

  Hello k. Baki.

  Thank you for your message.  Click HERE to download/install the driver for your device.  There is also a link available at HP that is specifically for the update software to use the Service Pack 2.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• E1200 low speed wired & wireless through L2TP

  I have the L2TP connection. Without the router, just cable, I have 35 MB/s download and 70 Mbit/s upload.

  Through the E1200 wired & wireless, I get a huge download speed 5-14 Mbps.

  I have the latest firmware and I reset it after the update.

  I read a lot of information about it and a lot of people write that this router just can't handle the gear through L2TP.

  Is this true? It could be fixed?

  If you get only 5-14Mbps download speed via the router, which is so far beyond the rate without it, I must say that the router has problems. You can try to lower the MTU settings to 1460, and then do the test using speedtest.net.If that does not solve the problem, I suggest getting a new router, preferably a one gigabit.

• Low speed SSD on Lenovo T61

  I bought new SSDS OCZ Vertex2 120 GB for my laptop, but the speed of R/Wr is low - max 140 MB/s (support SSD up to 260 MB/s) & problems with the FirmWare update are performed.

  It is a Chipset problem?

  This is a BIOS problem.

  old BIOS:

  

  new hacked BIOS

  

  did you update the bios SATAII? in the contrary case, the laptop is limited to SATAI speed, that's why you see only the limit of 140 MB/s.

  If you did not upgrade, then you should try bios update of Middleton.

  http://Forum.NotebookReview.com/Lenovo-IBM/459591-T61-x61-SATA-II-1-5-GB-s-Cap-willing-pay-solution...

• [WRE54G v3 - EU] Strong signal but very low speed

  Hello

  I just managed to get my new WRE to work after digging around several useful threads. My laptop connected successfully through the WRE and I got the signal strength excellent (54 Mbit/s as the status of dialogue shown). However, when I tried to browse multiple web pages, they took a long time to load. I ran a test of speed at speedtest.net and I'm barely 100 KB/S download speed (sometimes, it falls as low as 50 KB/S). Before when I connect my laptop in my room through the living room's wireless router, the signal was weak but the download speed was decent.

  Is that what I can do to help increase the download speed? Any idea/useful experience will be greatly appreciated! My router is not Linksys but custom-made by my ISP to support DSL, phone and TV at the same time.

  Thank you!

  What is the Distance between your router - WRE54G and computer. Make sure the Distance between your router and not more then 40 WRE54G fts 40 fts and the distance between your WRE54G and not your computer. Once you have done this right connections, after that, you can check the speed of your computer.