lpdj3050a_j611.cab required

Similar Questions

• Why is disk1.cab corrupted on each software download / install?

  Hi, I would be grateful for the help I'm confused on how I can solve this problem.

  Whenever I have download new software on the web and run it to install on my computer, whether upward with an error message that is usually based on the "disk1.cab" file is damaged. I uninstalled IE9 I thought it was that which was it corrupts. This is not the case. I tried Firefox and the same thing happpens. I deleted the download folder, and I even tried to register the software on the desktop. Always without success.

  It doesn't work if I download the software on another computer (which is also on the same network) and install from a memory stick in my computer, but this is clearly not a long-term solution.

  The failure always refer to the "cab" file then the obvious from the point is to look at the installer msi Windows (!).

  The messages are as follows:

  Error 1335. The file 'disk1.cab' required for this installation is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  OR

  Error 1335. The file 'media1.cab' required for this installation is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  Using Vista Home Premiun 32 bit OS, SP2.

  Thanks for your help.

  Hi JonConnor,

  You can try these steps and see if it helps.

  Method 1:

  You can try to save the download to another drive other than drive C: hard disk and see if it workss.

  Method 2:  Run Check disk to repair bad sectors on the hard disk.

  a. open the command prompt window by clicking the Start button, tap all programs, accessories, and then right-click command prompt.

  b. at the command prompt, type chkdsk /f and then press ENTER.

  Now type in the command chkdsk /r and press ENTER.

  c. restart the computer and check.

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, this process there is a chance of DATA loss from this particular area, so you can take a backup before starting the checkdisk.

  For more information, see the following article:

  Check your hard drive for errors

  Hope this information is useful.

• Someone knows how to fix a corrupted file mib.cab? 2350 error code? The result of the installation failed for Mindstorms NXT 2.0 on computer vista laptop, service pack 2.

  Tried to install the Lego NXT 2.0 software (programming robotics), a message "file 'mib.cab' required for this installation is corrupt and cannot be used.  A message gives the error code 2350.  Someone knows how to fix a corrupted file mib.cab?

  Try in the Forum of programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• vCenter Converter: Installshield Error 1335 data1.cab P2V Wizard

  I'm installing vCenter Converter v4.3 (P2V) on a Windows XP SP3 computer.

  The installation process fails with:

  "Error 1335: Cabinet file data1.cab required for this installation is damaged and cannot be used.".

  This is an error of Installshield Wizard.

  I checked the Md5 of the file installation (VMware converter-all-4.3.0 - 292238.exe) and it is correct.

  I used a copy of the installer on another computer Windows XP SP3, and installed correctly.

  I tried the following unsuccesully, the same error occurs each time:

  1 / /Unregister and then/regserver MSIEXEC

  2 / deleted MSI. DLL, MSIEXEC. DLL, MSIHND. DLL and re-installed the latest Installer Microsoft MSI v4.5.

  3 / delete C:\Program Files\Common InstallShield

  4 / implemented a fix registry CAB file.

  5 / rebooted the PC in a minimum configuration (MSCONFIG to disable all services by default, no provision of the automatic launch at system startup, but)

  6. completely uninstalled antivirus, firewall

  7 / made sure the path of the destination folder is short (ex. C:\VMC)

  Any suggestions please let me know.

  Randy

  during extraction worked among other files, you should find an MSI - you can doubleclick as MSI

• Error 1311 - missing Data1.cab file

  I studied this problem and still need help because I think my problem is different. First of all, here is what happened...

  I bought and legally own CS4 Master Collection. I had it installed on my desktop. I ended up uninstalling Adobe Acrobat 9 pro. A week after having done that I had to do a system restore point BEFORE restore I uninstalled it. If the program obviously showed once again, but with the error. Due to the mistake, I uninstalled CS4 completely, thinking I could reinstall it again. Well when I went to reinstall, he already said that Adobe Acrobat 9 is already installed so I could not select to reinstall. All other installed programs very well. And then when I try to repair Acrobat 9, it shows not even during installation with the other CS4 collection. And when I double click to open it, it opens and when I go to fix it, it will open a box to install saying it will install and then gives this error 1311 saying the Data1.cab file is missing. And it is absent.

  So my question is, how do I uninstall when there is no option to uninstall. Or how to make the Data1.cab required instead to see if it will indeed install correctly?

  JeneenSW you have the option to uninstall through programs & features/add and remove programs?  I'm sorry that you have not specified which version of Windows you are using?  But yes, please run uninstall before running the cleanup tool.

• Trying to load PRE8 on Win7 but I get a data1.cab error

  Hello world

  I bought a Department of education through 8 bundle Photoshop and Premier.

  I tried to load both on my laptop.  Photoshop worked but first Elements 8 keep saying error - Error 1335. the file 'Data1.cab' required for this installation is damaged and cannot be used.  This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  I have it loaded on a computer with Xp and it worked.  I then removed and tried again on Win7 and the error appeared again. I sent again and they sent me a mistake a same new happened.

  I'm not lost.  Any suggestions?

  I have a HP Pavillion DV7 in WIN7 32 bit operating.

  Thank you

  Amanda

  Amanda,

  The CAB file is a "CAB" file and contains a large part of the code, which is installed in a container archived and special. This error message usually occurs when the installation DVD is damaged, scratched, or has fingerprints on it. For some reason, the Setup program cannot read in the DVD.

  Since it is forbidden to make a backup copy of the program installation discs, I use a DVD, such as the free ImgBurn copy utility and copy your DVD. Often, that you will have a better copy of the DVD, if the damage has to be light. I got several DVD system that could not be read by the installer, which worked perfectly through just to make a copy.

  We can then copy the entire contents of the DVD to the computer. Most do this on the desktop and install from there. Again, make the copy (although on the HARD disk here) seems work for many.

  Finally, contact Adobe and ask filter replacement, because it seems that yours is damaged.

  Good luck and hope one of these works for you.

  Hunt

• Error 1335 during installation of NI LABVIEW Run time engine 2009

  Hello

  When installing Labview 2009, I get the following error.

  Error 1335: The file 'mib100.cab' required for the installation is damaged and cannot be used. This may indicate a network error, error reading from the CD-ROM, or a problem with this package.

  I tried to install the software using 2 different CD-ROMs, and hard drive. I also uninstalled software OR previous and tried to install Labview again.

  Screenshot of error during the installation of the hard disk is attached.

  Thanks in advance,

  Hyacinth D

  The installation was successful, after replacing the DVD drive.

  Thank you!

  Corinne

• Error 1335

  Hello

  I just bought a new laptop running Windows Home Premium (32-bit) Service Pack 2 and I am trying to install Steam. Whenever I do, I get the message Error 1335 indicating that the "file 'Cabs.w1.cab' required for this installation is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package."

  I don't think that a network error is the cause that I have Steam on my main PC that runs on the same network as my new laptop computer. Steam is also downloaded not installed from a CD. Any ideas?

  Thank you.

  Hello

  You can try the steps in one of the articles mentioned in the steam forums. One of the users seemed the solution given in the link.

  http://forums.steampowered.com/forums/showthread.php?t=950829

  Solution was given in the link: http://developer.valvesoftware.com/wiki/Cleanly_reinstalling_Steam

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of all software folookund on the Internet and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software Internet.
  

  Concerning
  Anthony.

• Smartphones blackBerry Curve 8900 Device Software for Rogers - DAMAGED Setup FILE

  Hi all

  I was wondering if someone else ran into this problem (if there is no BlackBerry Rogers on this forum). I tried to download and run the software for the device for Rogers out of the BlackBerry and the installation site, I came across the following error message:

  "Error 1335. The file 'Data1.cab' required for this installation is damaged and cannot be used. This may indicate a netowkr error, an error reading from the CD-ROM, or a problem with this package. »

  When I try clicking on ignore, I get this message:

  "Error 2350. FDI Server error. "

  I wish that I was good enough to know what that means, but I'm completely lost here. I tried to install this on two machines (XP Home SP2) and Vista, both give me the same problem.

  I feel there may be a problem with the software on the site. Could someone else confirm this or get an idea of what to do?

  Thank you

  -Antonio-

  you are absolutely right

  It's something like a lottery. Guess a lucky time for downloading a file

• Installation of CS5.5 on Windows 10 everything is good BUT Acrobat

  All programs in my install installed no problem but on Acrobat, it fails. When I run the installer there is a message that a reboot of the machine is detected... it does not exist.

  I've updated Windows (and anything else I could find), repair Microsoft Visual C++ uses the Adobe cleaning tool, uninstalled all CS5.5 and started with a new download. Turned off the coast of all software viruses represented install.  I had 8 errors up to these 4 bore, any help would be great. The computer on which I installed is less than a week.  I use this program every day for work, and until I can run I'm stuck on my old computer which is almost dead!

  Errors in the log are as follows:

  Exit code: 6

  
  -------------------------------------- Summary --------------------------------------

  
  -0 fatal Error (s), 4 (s), 0 warning (s)

  -Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0.

  
  ERROR: Error 1335.The 'Data1.cab' required for this installation file is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  
  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message: file 1335.The error 'Data1.cab' required for this installation is corrupt and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  ERROR: DW050: the following payload errors were found during the installation:

  
  ERROR: DW050:-Acrobat Professional: installation failed

  
  -------------------------------------------------------------------------------------

  Make sure that there is no other acrobat and any drive on your computer/browser version.

  If you use an installation cd, copy the installation files to a desktop directory and install from this directory.

  CS5.5: https://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

• javaw.exe missing on view Security Server - view 6.2.1

  Hello

  I'm trying to associate a view Security Server with a connection to the server (point 6.2.1).  Both servers run Windows 2012 r2 and ran into a new error (for me anyway).

  I have install the matching password, and when I go to install the Security Server component, I get an error of coupling .  I can access the server from the server security with https connection and think that other DMZ Firewall rules are configured correctly.

  Looking through the papers, I find a mistake on not being javaw.exe is not a recognized command.  I drill down to the path of the log entry and find that javaw.exe is not where it seems expected.  It seems to be a dynamic path created by the installation process

  serverInstUtil : 18/12/15 10:15:11 lancement « « C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\jre\bin\javaw.exe »-Dcom.vmware.vdi.orchestratorj.nativelib=ws_java_nativeNODEP-Djava.net.preferIPv4Stack=true-Djava.library.path="C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\bin » -cp « C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\sslgateway\lib\ * » ; «C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\lib\ * «;» check the 8009 "C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\cache" com.vmware.vdi.tunnelpairing.XmlAjpClientNew 10.97.1.129 ".

  serverInstUtil: 18/12/15 10:15:11 Matching of Java SS returned cheque ' ' C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\jre\bin\javaw.exe "' is not recognized as an internal or external command ".

  serverInstUtil: 18/12/15 10:15:11 ERROR: an unexpected error occurred while determining if advanced Security Server matching is supported

  I used this binary installer to install the server of connection corresponding without problem I've noticed so far.  I just downloaded the 6.2.1 installers yesterday (17/12/15) and the files are dated 08/12/15.   I have not found any related to the release notes for this version, or in the installation guide.

  I can certainly install java runtime and copy the files in place (although I do not know what version).

  Any suggestions or ideas?

  File this one, by virtue of be sure to double check...

  I have disabled UAC, re-directed the installer - the same error.

  I saw the event log and has detected an error (event ID 11335) MSIInstaller

  Product: VMware Horizon 6 connection Server - Error 1335. The file ' Replic ~ 1.cab ' required for this installation is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  It turns out that it was the MSI. When I have re-uploaded the file, it works beautifully.   I had just used this file 10 minutes before.  Will show measure twice... really does matter

  Save this here for others to avoid my mistake ;-)

• The VMWare Tools on Windows 2003 Svr Setup error

  Hello

  I'm using VMWare Workstation 9.0.1 build-894247 under Win 7 x 64 and and try to install VMWare tools on a WIndows 2003 Svr Standard guest but keep getting the error "Error 1335 the cabinet file 'Toolbox.cab' required for this installation is damaged and cannot be used...". "The installation of Win 2003 SP2 and all updates from MS, I got this error several times.

  A screenshot is attached.

  Any suggestions?

  I have no problem with installation/update of the VMWare tools for other Windows guests that I recently installed.

  Thank you

  John Davis

  Verify that the checksum MD5 or SHA1 of the file windows.iso in the working directory of VMware Workstation is as indicated below.

  For version windows.iso of VMware Tools file 9.2.2.894247:

  MD5 = 8d9a47fddf3988bb1fcb62bb21d3fa8f
  SHA1 = 6a55b0d276a3442589d6a4892fa8759e8ca42712
  

  These values have been generated, based on the extracted windows.iso file of Tools-windows - 9.2.2.exe.tar should be the same one included in the WS 9.0.1 installed.  Note: The checksum SHA256 for the file windows-tools - 9.2.2.exe.tar has been verified against its value published prior to extraction.

• Lightroom 5.5 on Windows 7 upgrade to 5.7 LR has failed. LR is now missing from my system.

  5.5 Lightroom 64-bit on WIndows 7. Tried to switch to Lightroom 5.7 on the internet. Installer 5.5 removed from my system, but Lightroom version 5.7 has not completed.  Error message States "Error 1335. The file 'Data1.cab' required for this installation is damaged and cannot be used. "Basically I now do not have Lightroom.  How ideas get 5.5 reinstalled or updated to 5.7?

  Hi, you can re - download directly from:

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  If the cab file is corrtpt, you will need to download if it can not be extracted.

  EDIT:

  I forgot to mention also clearly files temporary folder either using using disk cleanup or type folder in the search box, press on enter, select all and delete everything in the directory.

• Adobe Acrobat does not install

  I try to instill the CS6 Design Standard on my computer (I reformatted recently) and everything installs correctly with the exception of Acrobat.  I've tried everything I can think of and nothing seems to help.  The following image, this is what happens...

  

  When I click on the summary of the error, I get the following message:

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF023, DW063...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 7 (s), 0 warning (s)

  -Payload: {94FEA41F-7345-429F-AA31-5C615F24CE29} Adobe WinSoft Linguistics Plugin CS6 1.3.0.0 -.

  ERROR: DF023: impossible to delete the backup file 'C:\adobeTemp\backup\adobetmp288022124' error 5 access is denied. (20 Seq)

  ERROR: DW063: command error ARKDeleteFileCommand Seq (20)

  -Payload: {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0 -.

  ERROR: DF023: impossible to delete the backup file 'C:\adobeTemp\backup\adobetmp302622248' error 5 access is denied. (Seq 38)

  ERROR: DW063: command error ARKDeleteFileCommand Seq (38)

  -Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0.

  ERROR: Error 1335.The 'Data1.cab' required for this installation file is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message: file 1335.The error 'Data1.cab' required for this installation is corrupt and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Acrobat Professional: installation failed

  -------------------------------------------------------------------------------------

  The system configuration required

  any help on this that could lead to a successful installation would be much appreciated.  Thank you.

  See the following help document:

  Exit code: 6, Exit Code: 7 Installation errors.

  http://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html

• 11 items, downloaded said I have a corrupted file. How can I sort this please?

  Downloaded items 11, install. Get error error 135. The DATAL file. CAB required for installation is damaged and cannot be used. Downloaded Adobe then how is a file is damaged and what can I do to install it please

  Luk have you tried to download a new copy installation files?  If this isn't the case, you can download the installation for Photoshop elements 11 to http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=usfiles.