LPT1 port not found

Similar Questions

• Re: Tecra M11 - 15W - Parallel Port LPT1, not found in Device Manager

  Hello

  I have Tecra M11 with PA3680E-1PRP Docking Station. BIOS Version 2.9.

  Problem is, I want to use the Parallel Port LPT 1, but in anchorage additive dosent device manager there.

  Thanks much for the tips

  Hey Buddy,

  What device is connected to the LPT1 port? Usually if you connect a device to LPT port and you turn on you will be asked for drivers. AFAIK the LPT device drivers must be installed before connect you.

  Several years ago I also used LPT connection for my printer but one day it didn't work. The problem was only a defective cable. I replaced it with a new one, and then the connection to the printer has been recognized again correctly! :)

• When I try to reply to messages on some websites via Outlook, I get: "no socket error 11001 protocol smtp port 25 google host was not found."

  When I try to reply to messages on some Internet sites via outlook, I get, no socket error 11001 protocol smtp port 25 google host cannot be found.  also when attempt to send from outlook, I get, google found 3 error socket port 110 Protocol pop 0X800CCC0D.i am not very good at such things but can follow directions if they are not complicated to. A few years ago someone set up my computer and I remember their delete something with outlook, because I was going to use google to e mail.but I'm not sure. This problem became a big drawback.

  original title:, not socket error11001 protocol smtp port 25 host not found google, google can't find ox8oocccod

  Hello

  see this link:

  http://www.FixYa.com/support/t2859101-cannot_get_or_send_mail_error

• I.ncredimail 2.0 incoming server is not found 1104 error Socket port than 110 Pr0tocol P.0.P cannot find the host. SUPPORT emails are there just can't get

  My Email is incredible mail. Upgrade to the latest version 2.0. Impossible to get my e-mails that he says incoming 'P0P3' is not found, well I can't find and is not fault

  try, I am an old lady with severe ME and exhausted.  The info, I get up, it's "impossible to find host error Socket 110004, port ProtcolPOP the name is valid, but no data found.»  Someone out there help

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://forums.IncrediMail.com/

  It will be useful.

• I can't send e-mail messages that SMTP is not found that POP3 could not be found Socket number of Server SMTP PROTOCOLSMTP PORT 25 secure (SSL) No. error11001 error 0x800CCC0D

  SMTP could not be found POP3could not be not found serverSMTP Protocol SMTP 25 port secure (SSL) No socket error 0x800CCC0D number error11001

   

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• T60p w / no BT not found, no access I/O port menu!

  Hello

  I have a T60p w / bluetooth factory, no BT option (under preload Xp or another drive of W7, in that I was going to Exchange).

  installed all the updates, update BIOS giving, nada.  No BT device not found, no radio BT under FN + F5, all the usual stuff fails.

  strange thing is that I have NO menu 'I/o port access' to all security BIOS.  That's where I would allow BT (if it is installed and not dead).

  as in this post: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Does-the-ThinkPad-have-Bluetooth/ta-p/49160... even if there is no BT, there are other products covered by this I/O menu, such as wireless, USB, etc.  How do I have an I/O menu and how to fix this?

  it sucks.  I have a 2nd T60p machine (this one without BT option), and that there is no menu access I/O port security BIOS either.  What is going on?

  Thanks in advance.

  problem solved.  It was in the bios, had to scroll down, not before, see active hidden past.

  has had a lot of work to get the stupid TP BT laser mouse to connect, but there finally.  Windows Update stopped working, gave service does not no error message.  tried everything on the net without success.  Finally fixed by the Assembly of updated Storage Manager intel of all things.  Looks like everything works now.  W7 was not a transparent installation on this machine.

• I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

  I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

  Usually, by unplugging the USB device and plug it in then that she return to should force Windows redo the settings.

• Finger by scanning and mouse ports usb is not found - now! In addition, password does not work!

  My finger swipe and the USB mouse positions is not found - now! In addition, I forgot my password for the unit - VGN-AW120J! I think I have at the office this unit under the username above with a different through Sony password when I buy the unit - some time ago!

  Hi Robert,.

  It seems that the Windows login password has been forgotten and the prints Print sensor in does not.

  In this case, I suggest you to perform a complete system restore to solve the problem. Follow the steps here to perform the system recovery: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C459775

  It is necessary to take backup of all data before performing the system recovery, it clears everything from the computer and restore the computer to factory settings.

  If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/p/service.pl

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Adobe 8.12 - printing to the LPT1 port error

  Wonder if anyone can help with this question

  Recently repaired, a version of Adobe 8.12 because it was not convert documents to PDF via the normal methods.

  Managed to solve the problem of button to convert documents but I am now presented with an error when printing to the LPT1 port.

  The problem is got round by removing the print job, but I would like to delete the error message.

  Found my own fix eventually

  Error while printing LPT1:

  Rename C:\Windows\Inf\Infcache1

  to: infcache.old

  run a repair on acrobat to adobe via Add Remove Programs, reboot and its fixed.

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• 3480CT, device not found driver Portege

  I have a problem,
  I have a laptop toshiba portege 3480CT and is not an operating system. I am trying to install win98 SE, but when it starts to install this message appears:
  device not found driver: "OEMCD001."
  Invalid device CDROM drivers selected

  : so, how can I get these drivers, the computer has only CD-ROM drive, FLOPPY No.. CDrom drive is a pcmcia drive.
  Please help me!
  :)
  I also tried to install XP pro but with bad results, it gives errors when it tries to start the windows installation...

  WHAT to do, any help much appreciated!
  Thank you

  Hello

  If you have installed WIN 98SE on the device you need Toshiba drivers and utilities.
  Win 98SE OS you install all the applications in the following order:

  Display drivers for Windows 95 (for S3M7 Savage MX/IX) V4.11.01.7006 - 7.02.88 - 01
  YAMAHA AC - XG Audio Driver for Windows 95/98SE V.4.07.1011
  Floppy disk Win98 companion W98C09
  Logitech MouseWare for Windows 95/98 V8.37 BLD246
  V5.77 - MR577ALL004 modem driver
  Driver for TEAC V.1.06t (FDD Version 1.08 t) USB floppy drive
  Driver drive disk USB for YE - DATA V.4.30 Beta
  Panning of Driver Support (panning.sys) V3.0 (included in the display driver)
  Multi Media Port Replicator IDE Driver V.1.1.2.0315 with the file catalog
  Driver NDIS for V.2.21 de MSIR3.0 (driver Win98 OBOE)
  Toshiba Fast Ether LAN adapter (Intel 82559) V.2.01
  HALLOC. EXE (included in the Toshiba utility) V2.0
  Toshiba W983480US utility
  PCMCIA. INF for Windows98SE (support ToPIC100) V1.0
  QFE Win98Gold/Win98SE QFE KB:Q239697
  QFE Shutdown QFE Q242934
  QFE DiskTsd.VXD V.4.10.2223 Q246387xx8
  NDIS QFE Q243199 QFE
  QFE Win98SE USB QFE Q241084
  Direct X 7.0
  Acrobat Reader
  The users manual PDF file
  File PDF Manuel Modem internal
  Multi Media Port Replicator manual PDF file
  Toshiba wallpaper
  MS URL security update

  For Windows 2000 / XP in this order:

  Display driver
  TVALD
  TOSHIBA Power 2 extensions
  Toshiba Utilities
  Toshiba Mobile Extensions
  Energy saving of Toshiba Display Driver
  Toshiba infrared driver
  Toshiba IDE driver
  Acrobat Reader 4.05
  Operating instructions online
  Online modem manual
  Online manual users to multimedia Port Replicator
  Audio driver
  Driver Modem
  Country select utility (included with driver modem)
  Copy Toshiba wallpaper in c:\winnt
  Apply Service Pack 1 for the system
  Activate "Show the components of the" unplug or eject hardware trayicon
  Reinstall the display driver to support the new graphik S3 chip

  All the drivers you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/
  Please let me know if it has been successfully

  Best regards

• HP Envy 4500: Printer not found error message

  Just hooked up this printer to a Mac Mini end of 2012 4 GB of ram, processor 2.5 GHZ of Intel, IOS 10.11.5 I get the error message "printer not found."  Still printer is plugged into the USB port and marked as default printer.  Have to pull plug - n-new power printer, then it works.  Please let know us, I downloaded the drivers did I miss something?

  PS Site Web HP says printer out of warranty in 2015.  For 3 years we have used just like a copier to a company.

  Download and install this: http://support.apple.com/kb/DL907
  
  Then, reset the printing system:
  
  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Pro 608: HP 608 Pro will not boot-Boot device not found

  I got my new Pro 608 and installed my software after upgrade to Windows 10. Do okay, but the next day, nothing works!

  Keep saying that Boot Device not found!

  Not sure but it could be HP shield encryption does not work well? now, he cannot read the HD? or HD shot?

  I tried to restore default - but still does not work. Now other bios diagnostics no longer work. That is to say he's corrupt!

  Tried to update the bios, but doesn't seem to work. The bios still say 7/2015. I tried to update the bios 9/2015. Also used 7/2015 bios, bios Diagnostics but still does not.  I use a USB port and a connector USB Belkin C - I think not that it really is booting from the USB key to install the Bios.  I set the Bios to activate the firmware-C update.

  Sue, the best thing you can do since it is a new Tablet is contact HP Support directly for warranty repair.

  Most likely, they will replace the unit.

  Contact HP worldwide | HP® official site

• 810-160 Phoenix envy: envy phoenix 810-160: try to install Win10 after BSOD and format; drivers not found

  A few weeks ago, I got the BSOD and could only reformat without saving. After a data recovery service ravaged my hard drive, I bought a new drive. My recovery disk is not found (my guess is the woman she pitched in one of his fits of cleaning). Of course, I have to re - install the operating system and bought Win10 home.

  I plugged the USB and started the installation, but now get a message that no driver device were found. It is a pain, but it makes sense. Went to the website of HP drivers on your laptop and downloaded all the drivers, it produces for my specific model.

  Where I'm stuck:

  I have a pop up that says "Windows Setup" and "Select the driver to install", with a window not populated. I plugged my USB key containing the drivers and found him - USB key (H.) I chose this drive and the folder where I placed the drivers. Click OK and I get the message "no device driver has been found. Make sure that the installation media contains the correct drivers, and then click OK. »

  If I have the drivers provided by HP and they are not recognized, how do I proceed?

  Hello:

  Make sure that you dΘmarrez from a USB 2 port.

  You will not be able to install Windows from a port USB3.

  If you have the W10 installation media in a USB 2 port, windows can you are looking for the sata controller driver, so see if it works...

  Download the drivers from this link below (first or second listed file - 1 file listed (64-bit).

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation media W10 plugged into the machine, boot from the W10 installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, W10 will install.

• Example: Pavl'ln Slimline s5-1: Front USB Ports NOT working

  Really need help from the experts here - model desktop HP Pavilion Slimline s5-1: H2M46AA (a Joshua motherboard with H61 Intel Chipset) crashed hard drive and have no original driver. Clean install of Win7 Home Premium SP1. Everything is OK except other devices, Universal Serial Bus (USB) bus controller. Driver is not found. After installing Win7, installed an ethernet driver and the original files Chipset installed HP Web site. All drivers OK except the foregoing who apparently controls USB ports before 2 which did not. Then, installed all updates provided by Windows Update. USB ports before always inoperative. They worked before the new Win7. After much research, unusable before USB ports seems to be a common problem, but none of the planned solutions help (check that the cables, turn off completely, Intel Driver Update Utility, etc.). On my system, the first of the 4 ID material for this device shows as: PCI\VEN_104C & DEV_8241 & SUBSYS_2ADA103C & REV_02. According to pcidatabase.com, this is identified as: "Texas Instruments USB 3.0 XHCI Host Controller" and therefore a possible problem. The ports are, I believe, USB 2.0 and not 3.0 according to Joshua documentation (http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000525 see also "\windows\inf\setupapi.dev.log" shows there is no files on the drive associated with the ID of the above material because they are not found during the installation of the driver.) So the question: How can I get these ports USB works - have installed to each HP update recommended for this system. I'm puzzled!

  You're right, it's just an update of the driver, but I think that this is specified, you can see the technique of reference:

  FTP://FTP.HP.com/pub/SoftPaq/sp70501-71000/sp70786.html

  TITLE: Texas Instruments USB Controller Driver Update
  
  VERSION: 1.12.25.0 REV: A PASS: 2
  DESCRIPTION:
  This package provides the driver for the Texas Instruments XHCI update
  Solutions of controller in the supported models that are running a service supported
  System.
  
  PURPOSE: Routine
  SOFTPAQ FILE NAME: SP70786.exe
  SOFTPAQ MD5: 9bd312c3c424161a6c3357d260dcf939
  REPLACES: SP59644
  ENTRY INTO force: 6 March 2015
  CATEGORY: Driver-Chipset
  SSM supported: No.
  
  PRODUCT TYPE (S):
  Desktop computers
  
  MODEL OF PRODUCT MATERIAL (S):
  HP Pavilion HPE h8-1xxx PC
  Desktop computer HP Pavilion p6-XXXX (Joshua)
  Desktop HP Pavilion p7-XXXX
  HP Pavilion Slimline s5-XXXX
  HP Pavilion p6 PC
  HP Pavilion HPE h9-1xxx Phoenix PC
  HP Pavilion Slimline s5-1xxx PC