M17x R4 killer wireless

Similar Questions

• Only intermittent problem with wifi on alienware m17x with qualcomm wireless killer

  Hi, I have an alienware M17x with windows 8.1 and qualcomm wireless killer. I have a serious problem with intermittent wifi, that appears when I use programs like Skype, steam, multiplayer games, etc.

  Even if the wifi is connected, the connection suddenly stops working sometimes, especially when I use the applications mentioned above. (if I try to load a Web page during this time, the page remains attached to "resolving host"). Strange thing is if I disconnect and reconnect to the wifi Internet starts working immediately. Or I can wait a few minutes and the connection is re-established automatically. This isn't a problem with the network, because I had this problem on countless wifi networks I've worked, and all my other devices work fine in the same time, that my laptop no longer works.

  Additionally, this problem occurs only on wifi, if I use a connection cable, this never happens. (this is not yet a case of the wifi signal strength, as happens even when I am sitting right next to wifi router and wifi in the notification area icon is visible full signal).

  In the last months, I tried various possible solutions, but none of them have solved this problem:

  -Updated to 8.1 windows

  -Update of the qualcomm network drivers

  -Stop of various applications that I think might have been the origin of the problem

  -Uninstall completely different applications

  -Close all anti-virus programs

  Still after all of these steps, the problem persists. It would not be a big problem, as the loss of connectivity is not permanent, but what makes multiplayer games completely unplayable on my alienware machine. :(

  Just today I tried to launch AlienAutopsy test for my network card in Killer Wireless - N 1103 several times, and each time that the "transfer of data verification test" failed due to no connectivity (all other tests passed very well, only this one test failure all 6 times). I thought that it could be linked and gave me some hope that I might be able to target the cause of this unique problem. Therefore, I post here. If anyone can help me, it would be much appreciated!

  +++ S.O.L.U.T.I.O.N. +++

  «Go to network-> Network and Sharing Center-> change the adapter settings-> Wireless - N 1103-> properties (right click) Killer network card-> and finally UNCHECK it (the f * cking) "Qualcomm Atheros control bandwidth «»

  Enjoy the rush.

  See you soon

• Fall Alienware M17 Killer Wireless N1202 Connection

  Hey guys and girls, I'm here to ask about a problem that I've seen a LOT of people have with this laptop / particular wireless card. I recently bought the M17 and the only problem I had with it is the card Killer Wireless N1202 give up my connection randomly and reconnects.
  I have "business" with him for a few days now, but the drops random during the time of the browser, videos, and games really starts to break my nerves.

  So far, I checked the firmware and etc is updated in my laptop. Tried to disable the Killer Wireless Manager. A flick of some power in the performance options. Nothing seems to work.
  Anyone has a final o the problem solution?
  Thank you!

  so I think that the thing most important to do is to go into Device Manager, right click in the wireless card and choose uninstall.

  Reset.

  Windows will see it and reinstall it. It should work now. Give it a shot.

  If you use the Killer-N driver probably doesn't really matter.

• Disables the killer wireless 1535 under heavy load

  I just received a brand new 15 R2 in the mail a few days ago and have had any other problems with the wireless. It works very well under normal load IE internet browsing or streaming videos. When I try to download a game on steam or push the signal degrades slowly until the wireless card turns off. Then, you cannot activate the card via the hardware switch or click with the right button to enable. Any ideas? See the reference video.

  cs_setInnerHtml ('video_5eed075f-5174-43dd-b4cf-997c702184ea', ");

  I uninstalled all the software/drivers killer, deleted the drivers and reinstalled the drivers Slayers of the killer and dell Web site.

  Alienware has finally got resolution. They came and replaced the 1535 with an Intel AC 8260 killer. I'm going on two days with zero problems and more than 100 GB downloaded on my 5 GHz network to nearly 15 MB/s, which is what my internet caps to. Kudos to Alienware to send to the Intel card the next day. There he sent Tuesday of this week and the technician was home Wednesday afternoon. So far so good. I hope that Killer will solve questions 1535 a Windows 10 and 5 GHz, but unfortunately with imminent deployment, I have not time to wait for her.

• * KILLER Wireless 1535 disconnection from the wifi

  I have a new Windows AW15R2 10 Pro, everything worked fine during the first week.  I downloaded my games on Steam on my laptop (big 5 GHz speeds AC).  Since the last game I downloaded, I installed a wireless Xbox One adapter / controller and now my wireless guard fall.  I uninstalled the drivers for the Microsoft controller and always the same question.

  The wireless card downloads to approximately 20.0 MB/s for 30 seconds, then drops to 0 MB/s, I get a yellow exclamation mark on the icon turns off wireless and light up again.

  Please give advice on this issue.

  Thank you!

  Never had any problems with wifi killer.

  Have you tried to update the wifi and the Bluetooth driver from the site Web of Qualcom?

  www.killernetworking.com/.../Driver-downloads

  Alternatively, you can try to disable wifi automatic energy saving mode.

  Open Device Manager, and then right click on your wifi card, then select power management, then uncheck the box that says "turn off this device to save power".

• Alienware 17 R3 - BSOD ISSUE/FIX - killer E2400 Ethernet Driver / Version: 1.1.56.1236_A01

  This question/correction is in what regards the Alienware 17 R3 model. It has not been tested and confirmed for other models! ***

  The following information is presented to assist you (and DELL) with a DRIVER from DELL problem that causes WINDOWS 10 fixing to the accident of BSOD & MAKE YOUR SYSTEM unable to boot in windows desktop!

  I have listed the factors that are causing the problem and then follow up with what (I have laboriously have troubleshooted for over a week now) pilots are currently working without problem. I hope that this helps you turn it back on, and if you have a message of the moment and let me know! ((DELL-S'IL VOUS PLAÎT PASSER CE LONG À N'IMPORTE QUEL DÉPARTEMENT DE PRESSE NOUVEAUX PILOTES!)) PLEASE PATCH/FIX!))

  Device Manager > network adapters

  Bluetooth (personal area network) device / driver Version: 10.0.10586.0 (21/06/2006)
  (Heading RFCOMM Protocol TDI) Bluetooth device / driver Version: 10.0.10586.0 (21/06/2006)
  Killer e2400 Gigabit Ethernet Controller / Driver Version: 9.0.0.5 (27/04/2015)
  Killer Wireless-n | a | AC 1535 Wireless Network Adapter / Driver Version: 12.0.0.137 (23/08/2015)
  ***************************************************************************

  Control Panel > program and features

  Suite of killer Network Manager / driver Version: 1.1.54.1220
  Killer wireless drivers / Driver Version: 1.1.56.1236
  Qualcomm Atheros Bluetooth 61 x 4 Suite (64) / driver Version: 12.0.0.102
  ***************************************************************************

  Latest drivers available from dell.com (Alienware 17 R3)

  Killer Wireless-AC pilot 1535 / Version: 1.1.56.1236_A01
  ((Nom de fichier/.exe: Network_Driver_2WDXK_WN64_1.1.56.1236_A01))

  Killer E2400 Ethernet Driver / Version: 1.1.56.1236_A01
  ((Nom de fichier/.exe: Network_Driver_C95MK_WN64_1.1.56.1236_A01))

  Driver Bluetooth Killer Wireless-TA 1535 / Version: 10.0.0.102_A00
  ((Nom de fichier/.exe: Communications_Driver_PJ4XH_WN64_10.0.0.102_A00))
  ***************************************************************************

  When you try to install the Killer Ethernet Driver E2400 / Version: 1.1.56.1236_A01, the following problems occur:

  -ATTENTION ERROR/InstallShield DLL custom Action
  [Exclamation point in a yellow triangle] "Cannot find the entry point of the function"TweakLOMPerformance", make sure that it is implemented. .

  -L'installation will not continue or complete until you click a button 'OK' for the above warning ERROR

  -Once you click on 'OK', the installation will be complete and inform you that your system needs to reboot. At this point, 1 of 2 things will happen
  -1. The system will be blue crash screen immediately when the complete installation
  -2. The system will be blue crash screen after reboot, at the stage of account log-in/enter windows password

  -There are three possibilities BSOD:
  1 BAD_POOL_HEADER (most common result)
  2 KERNEL_SECURITY_CHECK_FAILURE
  3 IRQL_NOT_LESS_OR_EQUAL

  -Once the BSOD occurs, you will not be able to boot in Windows 10. The system will crash, restart, crash, reboot, and then win 10 implements its program of recovery/repair of the system. If you have a system restore, then you can reverse this pilot plant successfully, which will allow you once more in Win 10 w / no another BSOD. If you do NOT restore the system save point, your options become more extreme: 1. restore/Reset before installing the affected driver listed above; 2 restore/reset; 3 NOTE: Starting Windows hotfix fails to solve the problem

  Variables

  On an another Alienware 17 R3 (exactly the same card/construction material), installation and the following drivers work correctly without BSOD:

  Device Manager > network adapters

  Bluetooth (personal area network) device / driver Version: 10.0.10586.0 (21/06/2006)
  (Heading RFCOMM Protocol TDI) Bluetooth device / driver Version: 10.0.10586.0 (21/06/2006)
  Killer e2400 Gigabit Ethernet Controller / Driver Version: 9.0.0.8 (28/07/2015))! ANOTHER DRIVER VERSION VS. Above!
  Killer Wireless-n | a | AC 1535 Wireless Network Adapter / Driver Version: 4.0.1.137 (03/09/2015). ANOTHER DRIVER VERSION VS. Above!
  ***************************************************************************

  Control Panel > program and features

  Suite of killer Network Manager / driver Version: 1.1.56.1236! NEW VERSION of DRIVER!
  !!! NOT INSTALLED/NOW! (Tueur sans fil pilotes/Driver Version: 1.1.56.1236))
  Qualcomm Atheros Bluetooth 61 x 4 Suite (64) / driver Version: 12.0.0.102
  ***************************************************************************

  TCOLE334:
  Thanks for the solid recommendation; your post on the removal of the Dell printer provided Killer drivers (wireless network and ethernet), and then update directly from the site of the murderer himself worked like a charm.

  So, for anyone who has an Alienware 17 R3, or face a similar problem with BSOD by Killer drivers, I can confirm the work of solution of this TCOLE334 and fixed my issues surrounding network causing BSOD drivers.

  Now if only we can get our BSOD problems resolved with the Dell SupportAssist program. Starting from 04/03/2016, I'm waiting on an update of PC Doctor directly (I have been in contact with them for the last month now and work with them to try to resolve this breaker program.) I emailed plant minidumps, memory.dmp, newspapers, etc. We'll see. Patience is a virtue!)

• New WLan for Satellite L500-01u012 card

  The wifi card is dead in my toshiba satellite earlier this week, its out of warranty and toshiba shop wants $200 to replace it with a 2.4 ghz standard card.

  I'm looking to upgrade to a card capable of 5 GHz in all cases.
  I found a card that looks good. http://www.bigfootnetworks.com/killer-wireless-n-1103/
  I wonder if my laptop will support it?

  The laptop is a Toshiba Satellite L500-o1u012 and the old card was Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC card mini pcie half size.

  The description says:

  + Killer 1103 Wireless-N adapters are supported by two bands (2.4 GHz and 5 GHz), 3-Stream MIMO and IEEE 802.11a/b/g/n standards-based in a mini-PCIe half size format. +

  So it s a mini-PCI card and in my opinion, the local network card device must be compatible theoretically

• 15 - f003dx: wifi on 15-f003dx update

  So, I'm looking to buy a budget work.  Best buy has the HP 15-f003dx for less than $ 300, which is the price level, I'm looking for.  I also need a 802.11 WIFI AC capibilities.  Unfortunitly getting the WIFI 802.11ac for this price on a laptop under windows point is impossible (or so I think) so I am now looking in the upgrade this laptop with a new internal WIFI card.  (I don't want to use an external WIFI solution).  After a long, frustrating and very unproductive at Best buy, Geek Squad, then finally HP, I came to realize that no one knows anything about this and they cannot answer even the most basic questions about my problem.  So hopefully someone here can answer a few simple questions about it.  Are the 2 cards, I'm currently looking

  • Adapter Intel Dual Band Wireless-AC 7260 network - PCI Express Half-Mini Card
  • Azurewave AW-CE123H / 802.11ac/n/b/g + Bluetooth 4.0 / mini map low-profile PCI-Express (Broadcom BCM4352 & BCM20702)

  Issues related to the:

  1. What size / model is the WIFI card installed at the factory in this laptop?

  2 either of the cards that I'm looking for to adapt?  (half-size cards)

  3. do I meet problems of compatibility with one of these cards?

  4. do their a different card that I should consider upgrade this laptop 802.11ac

  5 is their another laptop with WIFI 802.11ac point Prize $ 300 I should consider instead?

  muryeaman wrote:
  

  So, I'm looking to buy a budget work.  Best buy has the HP 15-f003dx for less than $ 300, which is the price level, I'm looking for.  I also need a 802.11 WIFI AC capibilities.  Unfortunitly getting the WIFI 802.11ac for this price on a laptop under windows point is impossible (or so I think) so I am now looking in the upgrade this laptop with a new internal WIFI card.  (I don't want to use an external WIFI solution).  After a long, frustrating and very unproductive at Best buy, Geek Squad, then finally HP, I came to realize that no one knows anything about this and they cannot answer even the most basic questions about my problem.  So hopefully someone here can answer a few simple questions about it.  Are the 2 cards, I'm currently looking

  • Adapter Intel Dual Band Wireless-AC 7260 network - PCI Express Half-Mini Card
  • Azurewave AW-CE123H / 802.11ac/n/b/g + Bluetooth 4.0 / mini map low-profile PCI-Express (Broadcom BCM4352 & BCM20702)

  Issues related to the:

  1. What size / model is the WIFI card installed at the factory in this laptop?

  2 either of the cards that I'm looking for to adapt?  (half-size cards)

  3. do I meet problems of compatibility with one of these cards?

  4. do their a different card that I should consider upgrade this laptop 802.11ac

  5 is their another laptop with WIFI 802.11ac point Prize $ 300 I should consider instead?

  Hello

  The new HP laptop is no longer the white list. However, computers laptop AMD based work well with Intel wireless cards. I would go for the Broadcom one.

  1: no idea, probably a chip of 1 x 1

  2: Yes, half mini PCIe are compatible

  3: Intel probably yes, Broadcom I do not

  4: use google and 'Killer Wireless'

  5: probably not. I see some old envy Dv6-7000 with processors Intel Ivy Bridge. Certainly better than this model 7260AC and the support of AMD as my laptop of the signature.

• HP Probook 6540 b & Intel Advanced-N ANHMW WiFi 6235

  Hello

  I have a HP Probook 6540 b with WiFi Intel Wireless-N 1000 (1 x 2) (= Recv Trad. 1 & 2).

  According to the specifications, this laptop can also work with the following WiFi equipment:

  -ANHMW Intel Advanced-N 622 (2 x 2)

  -AGN Broadcom 4322

  My question is if it can also work with the latest maps:

  -Intel Advanced-N 6235 ANHMW (this is similar to Ultimate - N 633 ANHMW Intel but it's 2 x 2 instead of 3 x 3)

  -Killer Wireless-N 1103 (3 x 3)

  Thank you

  Ioannis

  gecon27 wrote:
  Thank you!
  Yes, I know it's a combo, and I thought that somehow I can disable (or delete?) Internal bluetooth module and thus to keep the combo for two features (WiFi + Bluetooth). I guess that's not possible, right?
  Now one more question: if I buy the Intel Advanced - N 622 ANHMW (2 x 2), do you think I'm having problems with my BIOS recognize it? I read several posts on the Internet where people say I might be needing a BIOS whitelist "tuned". Is this case for this card as well?

  Thank you
  Ioannis

  6235 Intel won't do anything because of the whitelist. However, some BIOS (like mine with Ultimate - N 6300 works well) can be modded, but it is not recommended. The Intel Advanced - N 6200 is a large map and I got until I installed an Intel 6300. You don't have to risk bricking your laptop if a good upgrade is available (6200). Is the part number: 572509-001

  Make sure that the chip has this part number!

  http://www.ebay.com/itm/HP-intel-622ANHMW-6200-6200agn-wireless-card-sps-572509-001-300M-/300767193298?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D15053%26meid%3D7497341630442875544%26pid%3D100005%26prg%3D1125%26rk%3D4%26sd%3D271025774527%26

  This chip I bought cost me £20.

• WRT1900AC 5 GHz speed internet a drop to zero during a short period

  Hello

  Could you please help me with this question. I ' v had the router for a few weeks and only reviews the issue when I download large files, the drops of speed to zero and I momentarely loses internet connection, only so that it can be restored shortly after. It continues to go like that in the waves. (There is no disconnect/reconnect the router).

  It only happens when I use 5 GHz. There is not such a problem with 2.4 ghz

  I tried all the different parameters (from mixed 802. 11A & n and a/d) and the widths of different channels. Firmware is updated through automatic update.

  There are no other networks of 5 GHz around me.

  My other PC is connected via a cable and have no issues.

  My wireless card is killer Wireless - n 1202

  With the help of windows 8.

  Thank you

  I suggest to disable the automatic update, it's a bad idea. Then since there are already old, you can do a factory reset and the config from scratch. Which has been shown to solve a lot of weird problems.

• Alienware 13 R2 Wifi - completelybroken

  I have two wifi routers

  ActionTek C2000A

  NETGEAR WNDR4000

  which works flawlessly with about 20 different devices in the home. Except the Alienware 13R2.

  This computer does NOT connect or randomly disconnects after a few minutes of service.

  Is there any solution for this? I did a search of the forum and did not find anything, although Googling this problem there are a few discussions since the beginning of this year, pointing to an endemic problem with the large map Strip killer.

  So, Yes, I use a cable, always, with this machine. Not too cool!

  Thanks in advance

  Hello.

  You have killer Ethernet, WiFi and Bluetooth.

  Open the control panel and uninstall the wifi killer and killer drivers Ethernet Dell.

  Let your killer driver installed Bluetooth.

  Install these drivers updated directly from the site of killer.

  www.killernetworking.com/.../Driver-downloads

  You need Driver Killer for E2200, E2400 and Killer Wireless.

  Once you have installed the new driver and restarted the computer, open the Device Manager.

  Right click on your WiFi card and open the properties.

  Along the upper part of the window, you will see a tab called 'Power Management' click this tab and then UNCHECK the box that says "Allow computer to turn off this device to save power".

  Click OK and close popup windows.

  I hope this will fix you problem.

• Computer laptop Alienware 17 would not start

  Hello

  I had this problem twice now. I was on my laptop and it should work fine ALL day and then I would stop for the night. When I wake up and try to turn on, it would do nothing for most, but sometimes he would light up for about a second or two and goes off. Both times I solved this in re-allocation of places the battery CMOS/button. Although I have solved this problem on my own, it is still VERY upsetting. Why the * does this continue to happen?

  The first time it happened, I had just installed the latest version of the BIOS and rebooted and it worked 100%. Is that I turned it off for the night and it did not work the next morning. I followed the instructions on how to install the latest BIOS very closely and I did twice previously without a problem at all!

  The second time it had happened was yesterday when I had just updated the card Wifi and a few other minor drivers through Device Manager. While I was still with my laptop, he turned to a BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL. When he did this, the speakers just makes a constant humming ceased after it began to restart. All I did was watch YouTube when this happened. And when he was trying to restart it froze on the Alienware logo. I waited about 15 minutes hoping it would move along, but he did not. I pressed the power button until it is turned off and then tried to restart it without success.

  This morning, I completely disassembled to remove the main battery and the battery CMOS/button.

  WHAT HAS CAUSED THIS? It seems to be whenever I update the drivers. I always update from the Dell website on the page where I get my serial number under "Drivers and downloads", or through the Device Manager. What is a bad piece of hardware? Software conflict? Please, please help me this end for good.

  Alienware 17 R3

  Processor: Intel (R) Core i7-6700HQ CPU @ 2.60 GHz 2.59 GHz

  Installed memory: 8.00 GB

  System type: 64-bit, x 64 based operating system

  Network adapters: E2400 killer Gigabit Ethernet Controller

  Killer Wireless-n/a/AC 1535 wireless network adapter

  Yes the new BIOS is totally *. Return to 1.2.2 is the most stable.

• Rosetta Stone total v4 works with no error message.

  Original post: Rosetta Stone total v4

  I recently installed Rosetta Stone total on my 64 bit Windows 7 computer.  Until very recently, it worked fine.  Now when I open the program, it instantly does with no other error given.  I reinstalled the drive and downloaded the software directly from Rosetta Stone.

  I downloaded the update and checked the compatibility.
  As I say, it worked.

  Thanks a lot for your help.

  We discovered the problem at the origin of this problem.  Rosetta Stone is in conflict with the application of the technology of Bigfoot Killer wireless.  Essentially, Killer drivers updated more quickly that the Rosetta Stone could keep track of and they are working on a fix to ensure this does not happen.
  If bring you your drivers at 6.1.0.179, or before, the Rosetta stone works perfectly.  These can be found on the website of Bigfoot.  It does work on the latest current drivers 6.1.0.219.  Rosetta Stone did not specify if the fix would come from an update of their software or if they ask Bigfoot to update their drivers but they work.
  I don't know if it is possible to make this thread a known solution, but apparently anyone with a Killer wireless network will have this issue until the Rosetta Stone have settled it.
  Thank you very much
  Rebecca

• Internet random Lag Spikes - M14xR1

  Since yesterday evening, 26/10/12 I have experienced random lag spikes on all games (Hawken Beta (installed yesterstay) Mechwarrior beta, MW3 and BF3).
  * Display rate doesn't drop when the shift happens
  * Last lag for 1-3 seconds
  * Shift occurs on cable connections and wireless
  * Shift occurs when person not me is on the network, and while others are on it as well
  * Only occurs during the game I can say
  * Not sure if other computers on the network are late because none of them are computer games
  * I did tests using SpeedTest and ping/DL/UL speeds are normal
  * Tried to disable the antivirus (Kaspersky). No change
  * Ran virus scans and malware using malwarebytes and Kaspersky. The two negative results

  Any suggestion or test that I can run to see if it's a portable hardware problem or a problem of router/modem question/ISP?
  Cable ISP
  Cisco modem (telephone)
  Netgear gigabit router

  M14x-R1
  Intel I5 - 2430M
  8 GB RAM
  GeForce 555 m 3 GB
  Killer Wireless-N 1103

  It has been almost 2 weeks now, and the problem hasn't returned since I saw a bucket truck at the end of the street, working on the node. Pretty fun I never even get a call from the supervisor telling me that he had sent someone to the node. Suppose finally he realized that I was right.

• HP Officejet 6500 kills everything on my wireless network

  I have the HP Officejet 6500 and when I try to put in place, wireless, it kills everything that is on the network.  It is not just completely kill, it pushes everything out of the network internet access.  I had everything set up in my old house without problem, but I recently moved and changed routers and the trouble started.

  I completely deleted all my computers printing software, thinking that maybe there is an IP address from my old router in conflict and have also used the HP wireless program both without success. I'm about to end with it.

  My router is a SMC8014WG and I have 3 computers running on Windows Vista and 1 running on Windows 7

  OK, let's try the same thing, but before you start:

  1. disconnect the phone line to the back of the SMC

  2. restart the SMC by pulling the power plug momentarily.

  3. follow the instructions above.

  4. When you are finished, plug the phone into the line and raise the MSC.