M70-160: don't wake up from hibernation or standby - hardware or software?

Similar Questions

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.

• Satellite Pro A100 spontaneous wake up from hibernation or standby

  Hello world

  Since a few days my Satellite Pro A100 automatically wake up from hibernation mode
  (and last night mode ensures too)

  I don't have any in features (such as LAN or USB) wake up, as far as I know, that these features are not yet present in my current BIOS version (1.50).

  The wake-up generally occurs with peripheral No. or LAN cables connected.

  I used the hibernation mode without any problems for over two years on this laptop.
  So I think that it is a hardware problem, for example something related to the power button or the close button of cover.

  Is it possible to completely disable the close lid button? PowerSaver to disable for example l ' hibernation on the cover, but I don't seem to be able to turn OFF the alarm on the LID.

  Thanks in advance for any suggestions or comments

  seeah

  Hello!

  Well, in your case, I would try first to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn t work, please contact an authorized service provider. Technicians you can check laptop because then it looks like a LID switch problem.

  Good bye

• Satellite 1410-s173, my machine is not waking up from hibernation or standby.

  That's exactly what happens when my toshy gets into hibernation or standby. I have a satellite 1410-s173. When I close the lid or when I leave it alone for more than 30 minutes, it is in hibernation... right? Well, when I opened the cover or I press power on, my power light turns green, my HDD wakes up and flickers hard drive indicator led, even a very small backlite appears on the monitor, but there no picture or sound or any intention to work. can anyone help? Thank you.

  Hello
  what the laptop should do "when I close the lid or when I leave it alone for more than 30 minutes" can set you in the standby power Options!

  But your winter problem, have you installed maybe new drivers or new software because the problem recurs?

• Satellite don't wake up from sleep or hibernation when the lid is closed

  It is a problem that I had with my laptop from the outset - if the laptop is in sleep or Hibernate mode and the lid is closed, or the lid is closed and will switch "standby" from there, it won't wake up or respond to the switch once again opened.

  Even holding down the power button has no effect, the only way to turn it back on is to remove the battery, put it back and turn the phone back on, lose anything I had opened.

  I fear that the laptop could be damaged by this, but there is no other way.
  This isn't a problem with the settings of windows, I had the same problem with the function suspends in ubuntu.

  Anyone had similar problems or know anything than either could have caused this?

  What model of Satellite L do you have exactly?
  What system is pre-installed? Have you tested this problem with laptop recovery fees?

  BIOS is up to date? If it is not updated in the BIOS.
  After update BIOS, set the default BIOS and test the features of the laptop.

  Your comments would be appreciated

• don't wake up after hibernation at all

  I have a Toshiba satallite running Vista Home and it went into hibernation and will not come out of it. I tried to remove the battery, release the battery died, each key on the keyboard while feeding system, any withdrawal of the laptop and trying to start it. I've been looking for days and tent everything to get it to you wake up with no luck. I have pluged to the top of each type of unit just waking and nothing. All I get is the power button lights up, housing starts of HD to go upward and the sleep icon will light up and the processor fan runs, but nothing else. It's a P305D-S8828.

  Any help would be much appreciated.

  Hi Jeff,

  I think Sandeep is one proposed that there is a problem with your hard drive or the motherboard.
  When you press the power button on your laptop you see anything on the screen? Are you able to get into the bios of your computer?
  You will be able to check to see if the hard drive is still detected by the laptop in bios. If the drive has failed, it probably won't see the upstairs.
  Warning: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Satellite Pro P300D-21F - how I wake up from hibernation?

  How do I wake up? tried the mobile mouse by pressing different keys. If you press the power button / stop watch computor message was not closed properly.

  Hey,.

  Normally the computer may be trampled to the top of the hibernation mode when you press the power button. The same button as you start the computer normally.

  What operating system is currently installed? What is the message you get exactly?

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• Satellite U300 doesn't wake up from hibernation mode

  Hello

  I was wondering if someone can help me,

  I have problems with my brand-new Satellite U300.
  When it comes into sleep/hibernation mode I can't have to reactivate.

  The power led remains blue. In the order of UDE the laptop I have to turn the power off completely and then re-boot.

  How can I stop this from happening?

  Thank you

  Hello

  I think you should try to update the BIOS.
  On the European driver Toshiba page, you will find compatible drivers and BIOS.
  Then first try to update BIOS and then check if it helps.

  Good luck

• Satellite A10 is necessary for well wake up from hibernation

  My Satellite A10 takes about nine minutes to Hibernate when the lid is closed, but the computer start faster when you press the Start button. Energy saving mode has been implemented correctly for the hibernation.

  Hello Terry,

  The hibernation feature works by copying the current contents of the RAM to the hard disk so that when the laptop is powered on the contents of the RAM can be restored and CANM unit and continue to operate as it did before being closed. This is different from the day before where the contents of the RAM is held in RAM and is maintained by battery or AC power.

  The Hibernate feature takes longer to call because of the time taken to write the contents of the RAM to the hard drive. The actual time required will depend on the amount of RAM you have installed, and also what processes and applications you run when you call Hibernate.

  If the actual time is too long then this could indicate that your hard drive may have some attention (cleanup and defragmentation) or the drive itself has problems (bad sectors), causing it to start over read/write operations as it attempts to Hibernate. I suggest that you try to clean the disc and then running CHKDSK to check if the drive is physically OK.

  Kind regards

• Satellite L350 - don't wake up from sleep mode

  Hello

  I have a new Satellite L350 with 4 GB of RAM on windows 7. whenever he goes to sleep (or put into hibernation) he does not automatically wakes.
  Is there a specific key or sets of traits required keys?
  I find myself pressing the power button which tells me that it is not stopped correctly.

  I disabled the sleep and Hibernate in the meantime functions.
  Thank you

  Hello

  You should check if your BIOS is up to date.

  Usually, there is no special procedure to wake in Unity mode sleep or hibernation, you must press the power button (very short) and it will wake up the unit on the mode 'sleep'.

  Welcome them

• Satellite A200 - 1 MB don't wake up on hibernation

  Help, please.

  I was using my laptop for over a month and I can't use the hibernation mode... I can't turn on my laptop when it goes into hibernation mode. The power light is blue. Is there a keyboard sequence that I have to type?

  I use Windows Vista Home Edition.
  Thank you.

  Hello Ina

  How, you switch to hibernation mode:
  -close the lid of the laptop
  -using the FN + F4 key combination or
  -using the button on the start menu?

• My computer seems to wake up from hibernation during the night.

  When I extended my computer at night, it is often times run when I wake up in the morning, when I opened the laptop on the password screen. What is the cause and how can I get him to stop?

  original title: my laptop hybernating

  Hello

  1. what version of Windows are you using?
  2 have you made changes on the computer before this problem?

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.microsoft.com/kb/929135.
  Note: Please see 7 step the computer to a normal startup Dungeon upward after the problem is resolved.

  You can also refer to:
  How to troubleshoot performance issues with standby, Hibernate, and resume in Windows Vista.
  http://support.Microsoft.com/kb/950686

• Suspend problems in mode: don't wake up from sleep

  Hello!

  I just installed Windows 7 to my HTPC. Media Center is great!
  But I have a problem. When I put my computer to sleep he wakes more. In fact it isn't even sleep properly. It seems that everything is turned off but the graphics card. There is no picture but the fan is screaming. He is unresponsive to the buttons of the mouse or the keyboard. Even the computer power button does not wake up or restart. All I can do is press the power button for a while to make the computer stop. I have a Logitech wireless set with PS/2 Sockets. I rechecked all power management settings already. In the BIOS are enabled all supports the ACPI and wake up PS/2 support. I can't understand how to fix it!

  For this afternoon, I tested Ubuntu 9.10 and had similar problems there. In Windows XP sleep works very well, however.

  My transactional includes:
  AMD Athlon 3200 +.
  Asus A8V - XE motherboard
  Kingston 2GB DDR
  GF 8600 GT 256 MB
  Seagate Barracuda SATA 250 GB (for BONES)
  WD Caviar 750 GB SATA (for data)

  Now, I found that it is the USB controller who refuses to go to sleep. There is a hidden feature in Windows 7 that you can use to find problems in the energy saving modes.

  In the command prompt, give a command:
  powercfg-energy
  and it will generate a report on the problems in your system. The report can be found at /Windows/System32/energy-report.html
  My report has revealed that there are two or three USB host that cannot be suspended correctly. After disabled USB support in the BIOS of the system had no problem in sleep. Of course I can't use USB devices more.
  Is there some kind of fix or tweak for Windows 7 USB drivers? Windows shows it has the latest drivers if I try to update.
  My motherboard is Asus A8V - XE, and there Via K8T890 chipset.
  EDIT:
  I found an answer on this thread: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/8059106b-21e2-4d17-bf2f-513a5b5d1d0b/
  Apparently it wasn't a USB socket that wasn't able to sleep but a USB device. I had a USB Memory Stick and the infrared receiver plugged and after removing their sleep works very well.

• Password box will not accept entry after PC under that Win 7 wakes up from hibernation.

  The problem is not consistent. Recently, I replaced the power supply because the PC wouldn't start on the first (or second) cold start and a forum suggested a weak power supply. The new power supply seems to have solved the no start problem, but the inability to enter the password (or whatever it is) persists. Any thoughts?

  Temporarily change your password 123456 and report if the problem persists.