Satellite U300 doesn't wake up from hibernation mode

Similar Questions

• Satellite Pro A100 spontaneous wake up from hibernation or standby

  Hello world

  Since a few days my Satellite Pro A100 automatically wake up from hibernation mode
  (and last night mode ensures too)

  I don't have any in features (such as LAN or USB) wake up, as far as I know, that these features are not yet present in my current BIOS version (1.50).

  The wake-up generally occurs with peripheral No. or LAN cables connected.

  I used the hibernation mode without any problems for over two years on this laptop.
  So I think that it is a hardware problem, for example something related to the power button or the close button of cover.

  Is it possible to completely disable the close lid button? PowerSaver to disable for example l ' hibernation on the cover, but I don't seem to be able to turn OFF the alarm on the LID.

  Thanks in advance for any suggestions or comments

  seeah

  Hello!

  Well, in your case, I would try first to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn t work, please contact an authorized service provider. Technicians you can check laptop because then it looks like a LID switch problem.

  Good bye

• Computer Windows XP doesn't wake up from sleep mode.

  Original title: standby mode does not wakeup.

  Windows XP PC collapsed to wake up from sleep mode.

  Hello

  Glad to know that you have solved the problem.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• Alienbware X51R3 with S2716DG from Dell doesn't wake up from sleep mode

  I recently bought a new Alienware X51R3 and Dell S2716DG Monitor. The PC happened a few weeks earlier from the monitor, and the system worked very well (and wake up from his sleep normally) on the old monitor.

  After setting the new monitor (executed in a single monitor configuration) on the display port, the PC is no longer waking up from his sleep. I tried to update the driver for the monitor and turning off the monitor 'Deep sleep' works without success.

  It worked fine with the previous monitor so I think that the monitor is most likely the culprit but haven't found a solution or work around yet. Power off the PC everytime I walk away from it or disabling sleep seems completely unnecessary.

  The Dell Support program help hard locks - the PC every time I launch...

  After a little violin, I was able to adjust the settings for PCI Express Link State Power Management from the command line with:

  powercfg 381b4222-f694-41f0-9685-ff5bb260df2e 501a4d13-42af-4429-9fd1-a8218c268e20 ee12f906-d277-404b-b6da-e5fa1a576df5 0

  Will test the sleep options and report.

• Satellite L350 - don't wake up from sleep mode

  Hello

  I have a new Satellite L350 with 4 GB of RAM on windows 7. whenever he goes to sleep (or put into hibernation) he does not automatically wakes.
  Is there a specific key or sets of traits required keys?
  I find myself pressing the power button which tells me that it is not stopped correctly.

  I disabled the sleep and Hibernate in the meantime functions.
  Thank you

  Hello

  You should check if your BIOS is up to date.

  Usually, there is no special procedure to wake in Unity mode sleep or hibernation, you must press the power button (very short) and it will wake up the unit on the mode 'sleep'.

  Welcome them

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.

• M70-160: don't wake up from hibernation or standby - hardware or software?

  I just maaaaaan!

  works fine, but will not wake up from hibernation or 5000mAh! unless you're going to wait a while! 15 min or something like that!
  After that he's going to wake up and work normally.

  I thought that it is overheating problem but now just turn it on and when the toshiba logo appear if you turn it off, it works again, but after 15 min it will BE!
  This isn't a problem of heating!

  She does this even without HD top!
  at first, it was the hibernation and standby problem, now it dose the same with stop!

  what I can do!

  I bought just the guys! ASP is now a way!
  is there anyway that I can do to fix this!
  I have difficulty PCs a lot, but not books!

  Hello

  You can also contact your local Distributor and check with him. They also have enough experience. On this path, it is not easy to tell exactly what is happening.

  Is the unit preloaded with recovery media or with your own operating system?

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• New installation of 8.1 on Y510p guard pro wake up from sleep mode

  Any ideas on why a fresh install of windows 8.1 vanilla pro would keep wake up from sleep mode? What spectator even can I look at to understand this?

  It seems that turning off sleep timers solved my problems. I also disabled standby (but not sleep) when it is plugged in and the laptop stay asleep until he does it's nighty WHS backups and then fall back to sleep now.

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• Satellite U300 falls down and cannot wake up from sleep mode

  Hello

  I got a Satellite U300 a few days and I get in trouble, when the laptop goes into sleep mode.
  The thing is that when he goes to sleep, the screen turns off but the light stays on (blue), instead of flashing with an orange color.

  It is not possible to wake the portable computer, and the only solution is to restart the computer.

  I tried the different possibilities to enter sleep mode, and I get the problem mainly when the computer is in high-performance Vista and when you press the stop button in the quick menu.

  I know Vista gives a certain a lot of problems, but I didn't know anyone here who face the same problem.
  Should I send the laptop back to technical support?

  Thanks in advance,

  I had the opportunity to work a little with several laptops from Toshiba, and one of them was Satellite U300. After a brief check of the basic functions for laptop I can say with certainty that switch between mode and standby/hibernation mode work well and I didn't notice any problems.

  I really don't understand what is wrong with that, but please do:
  -If you want to switch to standby mode, choose option using the button START.
  -Wait a bit and I hope after a few seconds, the laptop will change automatically in standby mode (blinking amber LED)
  -Close the cover
  -Wait a moment opened the lid and press the power button
  I really hope that your laptop will start correctly and you will be able to use the OS again.

  Good bye

• Satellite U300-144 does not come from the standby/hibernation mode

  Hi, can anyone help?

  I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.

  I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.

  A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.

  Have you installed latest PPVS too?

• Satellite Pro P300D-21F - how I wake up from hibernation?

  How do I wake up? tried the mobile mouse by pressing different keys. If you press the power button / stop watch computor message was not closed properly.

  Hey,.

  Normally the computer may be trampled to the top of the hibernation mode when you press the power button. The same button as you start the computer normally.

  What operating system is currently installed? What is the message you get exactly?

• Re: Satellite Pro 6000 - will not be from hibernation

  I allowed my Sat Pro 6000 to run out of battery at the weekend so I was working on it and it went into hibernation, now I can't get the screen to wake up again. When I Plug and switch on the power led lights up, but the driven system is not. If I leave the power for about 10 minutes, the fan turns on and then turns off again.

  I tried to disconnect the battery cable and the power and left these disconnected from the day to the next, but this did not help. I removed the hard drive and tried in another 6000 and it works fine.

  Everyone knows about this problem?

  Hello

  It seems more like a hardware problem as a problem of Hibernate (software).
  I think there is something wrong with the power of electronic power supply on the motherboard and so the machine doesn't wake up or start impossible.

  I think it will be not easy to fix this problem yourself.
  Therefore an ASP help would be needed I put t see any other possibility.

  Best regards

• Satellite A200-27U not wakes up after hibernation when you open the lid

  I just bought a new Satellite A200 27U which goes a lot so far.
  However, I have configured in hibernation mode when I close the lid.

  I can't resume automatically hibernate when I open the lid.
  I have to press the power button.
  Is this normal, should resume automatically?

  If yes how to do it do?

  It is the same with my Satellite P200 and I think it's normal. It is the same on my second laptop preinstalled WXP.
  Putting into service is not automatically and after you open the laptop I have to press power button / stop too.
  But it is not so problematic. What do you think?

  You use Windows XP Home or Vista edition?