M9000t freezes during Boot with only Windows 7

Similar Questions

• everything crashing when trying to install windows xp for a dual boot with preinstall windows 7

  I'm doing a dual boot with my preinstall windows 7, I'm done with partitioning already but when I try to reboot with my windows xp cd, just after he made all the check and talking about going to the installation of windows xp, it will crash and go to the Blue error screen. I was wondering how it will happen, so that I can install windows xp

  You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  Another option is to run your license of Windows XP in a virtual machine on Windows 7. I have http://www.oracle.com/us/technologies/virtualization/oraclevm/061976.html

• After installing Windows 7, the option to dual boot with my Windows XP already installed is not available.

  PROBLEM TO DUAL BOOT XP AND 7... 1 XP

  I have 4 partition one my h/d. in win xp (S.P 2) c drive is already install. now I install win 7 in d. disc 7 victory is also insal smouthly. but when I restart my computer, startup bual option not shown... only xp boot otometicaly... why?

  EasyBCD to add Windows 7 in the start menu. Note: after you have installed Windows 7, you should have a folder located in the Windows XP partition named C:\Boot (BCD store) that's what Windows 7 and XP boot build to start with. Easy BCD will list each operating system in the BCD store and also allow you to add an additional OS (in your case, Windows 7) and set the default OS after a 30 second delay.
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• How to fix my computer at home with only windows phone

  Just how internet on my windows phone. Have a computer at home, but no internet not connected to it. My screen on my computer at home is having a problem. This I just put my USB cable on the front of the computer at home to make it work?

  You can't fix your computer by using a Windows Phone, unless you receive instructions by a person's phone.

  What is the problem with your screen?

  Be specific with the problem your experience.

  How long it has past.

  Have you installed a new hardware or software?

  Have you checked the cable connection from the monitor to your graphics port?

• My pc freezes during a normal race, does not freeze in safe mode

  My computer crashes after the normal start time randomly I do nothing especially when it freezes. It seems to help if I constantly move the mouse so it doesn't freeze. I ran malware bytes and nothing was found, I also ran mcafee, norton, windows defender and malicious microsoft removal tool. I can run the pc in safe mode and mode safe mode with networking, but as soon as I run it in normal mode it freezes all the time. I'm at my wits end trying to fix can someone help plz

  No I have not used all anti-virus durning in the last two weeks to try to find a virus but have had no luck. I have run both antivirus software and uninstall it once I use it I am currently only running windows Defender

  If you care to try...

  In safe mode, create a new user account with EXACTLY the same privileges as the other.
  Reboot, logon to the account again in NORMAL mode. It freezes on you also?

  My point of view (speculation only): maybe your old user account is damaged.

  P.S. running with ONLY windows Defender may not a good idea. Install a good AV (anti-virus) program.  I do not make recommendations when it comes to AV.
  I'm very curious. You have used Norton and McAfee and uninstalled them. Don't you have to pay for them? They have trial versions?

  t-4-2

• S20 freezes on startup with installed PCIe card

  Today I made a new S20 (4105 - 94G) Win 7 x 64 BIOS: 60KT31AUS

  I installed the Quadro FX 580 without problem.

  When I tried to install a Firewire 800 PCIe 1.1 card x 1 system freezes during startup, with the ThinkStation screen with the Intel logo visible. No error message, no beeps. I waited for several minutes. This happens in all three PCIe free slots (x 1, x 4, x 16).

  The card in a Sunix FWB3414G (LSI chip).

  I would like to know 1) if any of you have this card work in an S20, 2) suggestions of what to try next.

  Thank you very much in advance for any help or advice.

  Pedro.

  
  

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• How to clone a Dual Boot XP Installation with only files Bootloader on C:\

  For me one of the hardest things to do with a problem in a discussion text is to indicate clearly what disk and partition that I want to talk.  For those who need a refresher in the nomenclature of charger for the startup of Microsoft, it's here.  Others may wish to move on to the next paragraph.  The specification of a given partition is of the form multi (a) disk (b) rdisk (c) partition (d).  But for any ordinary computer, a = b = 0, so we cannot forget for the discussion thereon.  The c value is the number of the disk in the boot order, with the boot drive with c = 0.  The value d is the partition number with the first partition on the disk with d = 1.

  In the interests of my presentation that follows, I will refer to rdisk (0) partition (1) as r0p1, rdisk (1) partition (3) like r1p3, etc to save space and we hope to maintain a clarity of thought.

  My intention was to clone successfully my dual boot Windows XP Edition family, and Windows XP Pro installation from a larger drive to a smaller drive.  Unfortunately, technical cloning of hard disk Partition Wizard Home failed due to the fact that there is more data on disk more capacity that fits on the smaller disk.  To be precise, there are a score of additional data on the largest drive F:\ r0p4.  So I used Partition Wizard Home to the clone C:\ r0p1 (the system partition that has the XP bootloader files), D:\ r0p2 (Windows XP Pro) and r0p3 E:\ (Windows XP Home) one at a time.  Because I'm using a disk controller hard PATA TX2 promise with the bios settings fixed, the only way to change the order in which the bios starts the disks is to change disks data wiring. I made that as simple as possible by using the two captains of PATA.  Note that the partitions that I cloned were G:\ r1p1 H:\ r1p2 and I:\ r1p3.

  To help the reader understand the placement of hard drive partition, repeat myself below.
  C:\ r0p1 Windows Bootloader files only (System, active) Bootloader of Windows r1p1 only file G:\
  Windows XP Pro H:\ r1p2 r0p2 D:\ Clone Windows XP Pro
  R0p3 Windows XP Home Edition (Boot) I:\ r1p3 E:\ Clone Windows XP Home
  R0p4 F:\ data partition

  After cloning, I made the following changes to starting XP r0p1 and r1p1 Chargers.  I added the ability to each Boot.ini file to start, r0p2, r0p3, r1p2 or r1p3 to eliminate the duty the wiring to study how the work was going.  I have created a boot loader diskette bootable with the same exact boot loader files in it, too.

  I discovered the original disc start, I could successfully start all four of XP with the r0p1 bootloader or the floppy boot loader.  But when I switched the order of disc, only the floppy drive would start in all four of XP.  The bootstrapper on r0p1 never appeared.

  I take this to mean that a redirect command where Windows is to search the bootstrapper may be necessary.  I boot from my Windows XP SP3 slipstreamed boot drive and access the repair console.  First I ran bootcfg/list and to my surprise, there is no entry found.  I took this to mean that windows searches for the bootloader files in the right place.  Is it possible to redirect windows to their position?  Think I remember reading something on the redirection of the search for the bootstrapper files.  I also thought about the command that rewrites the MBR, but got a warning that my MBR was specially built and serious consequences could occur, so I'll stop before making a misinformed choice.

  While I'm hoping for a generous person offers help, I got back to the top of all partitions on both disks using Acronis True Image.  Then if worst comes to worst, I can experiment with the controls of recovery without fear of losing all my work so far.

  Best regards
  Max

  I finally discovered that the two related errors that I made which prevented me from being able to start the operating systems Windows XP cloned using the files of Bootstrapper on the cloned C:\ partition.  Unfortunately, I had never taken the time to check the veracity of 'files bootloader being on the C:\ partition cloned'.  In fact the original C:\ partition was a primary partition, then the so-called C:\ partition "cloned" was a logical partition.  This fact makes no difference for the boot loader diskette XP that I had built, because he provided the bootloader files in a separate environment to that of the two hard drives.  But because the partition of the C:\ drive "cloned" was logical and not primary, there's no way I could do the C:\ partition "cloned" active, because only a primary partition can be active.  And the manufacturing process an active primary partition is crucial, precisely because it tells the computer where the Windows XP bootloader files.

  In my case after that I discovered that the C:\ "cloned" was logical, I used Partiton Wizard to convert it to a primary school.  But even in this case, Windows XP could not find the XP boot loader.  It was only when I started Wizard Partition a disk using and marked the partition C:\ cloned as assets that the bootloader has finally appeared.

  Even in this case I was not completely out of the Woods.  Because I had left the original source of the operating systems that are copied to the computer while the problem of bootloader, Windows had kept the previous drive letter assignments after that hard drives starting positions were exchanged.  So when I started out in what should have been Windows Home on E:\ drive, I discovered that Windows had kept the previous letter of partitions I:\.  And the drive system has even changed the C:\ drive to drive G:\.

  Less than a year, I would have thrown to the top of my hands which happened and began on with the cloning operation.  But because I googled for Windows XP system or start letter has changed, I discovered that what I had to do was to go into the registry and swap disks back E:\ and I:\ value names, and do the same for the discs back, C:\ and G:\.  And when I got to Windows XP Pro, I also had to swap the disks back D:\ and H:\ value names.  The only drive on that I had not to swap names was my original data F:\ disc.

  Finally, I believe that it is time for me to say why I went to all this trouble because I leave the two disks on the computer.  2 years 1 TB WDC Green Player is coupled to the drive controller Promise TX2 PATA is to use a SATA converter IDE, during the five year drive natively 300 GB Maxtor PATA.  Using the free software software Disk Bench with the windows pagefile disabled, I repeatedly timed 480 MB creating files on both hard drives on all the different partitions and there seems to be an advantage of the maximum speed of 10 Mbps on the old Maxtor PATA drive converted SATA drive.  But the speed of creation for the two ranges of 20 MB/sec to 65 MB/s using the PATA drive, while the beaches of SATA drive about 20 MB/sec-55 MB/sec.  It would be nice to point out, however, that the WDC Green drive is environmentally friendly, but not a 7200 RPM drive.  I plan to study if measurements with Disk Bench with the exchanged boot disks and the disabled swap file will make a difference in the time it takes to create the file.

  Best regards

  Max

• Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  Hello

  I tried to fix this for hours, I hope someone can help me.

  I downloaded the ISO "Win10_1607_English_x64.iso" (4.29 GB) file and with him came a "info.plist" (2 KB), so they are both on my 64 GB USB Drive (format: MS-DOS (FAT32)) called 'WINSTALL '.

  I have the ISO on the USB key, and it is selected as the ISO image in Boot Camp. I also have the USB the disk of destination selected, and yet I get this error:

  Your bootable USB key could not be created

  Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  I'm currently under OS X El Capitan Version 10.11.6 on my iMac (21.5 inch, end 2012) that is compatible with Windows 10.

  If anyone can help me I honestly love so much, I tried contacting Apple Support staff by phone, they said that they can't do anything, I tried to contact their Live Chat, but none of this has helped to solve the problem, and I tried to look online, but can't find too much.

  Thanks in advance for any answer!

  What OSX Version do you have? This site gives the requirements of Bootcamp: minimum system requirements to install Windows on your Mac with Boot Camp - Apple Support. And you did an upgrade? Could it be that the upgrade will not correctly for the OS?

  Looking at the 10 Windows version you downloaded, is the update of birthday, which was released less than a month ago. It could be that Apple is not reconisgin the Windows version when reading the disk, because it is too recent. I don't know if you have access to the download of the previous generation and do a Windows update?

• Can I do a dual boot with Windows 7?

  After taking all the precautions I can think to install Windows 7 on my wifes laptop. Drive recovery system, backups (2 DVDs) and an image I did more than 6 DVD.

  I thought why not only reduce the Vista Partition, install Windows 7 in the created partition and run Windows 7 to see if it will work on the laptop (gives me time to straighten out things so that my wife can always use). Then remove the Vista Partition. If the laptop was mine would just reformat the dang thing and deal with what it goes down from there.

  Then there is the Question of what to do about the EISA (recovery Partition)?

  Hello!

  Of course, you can install Windows 7 and do a system to dual-boot with Windows Vista... Why not? ;)

  As you have already said if Windows 7 works well on your laptop (I put t know which model you have exactly) you can remove Vista and use the old partition to store data or to include a new in the Windows 7 partition.

  The hidden partition do you mean isn't the Toshiba recovery partition! It is a feature of Windows.
  You can remove this partition you don t he most needs.

  In addition, with the Toshiba Recovery disk, you are on the safe side. If you don't want Windows 7 you can go to Vista (factory settings). :)

  Good bye

• I can only boot to the Windows 7 operating system

  I have installed Windows 7 OS on my macbook air using training camp and the USB key. Now, he can start only Windows operating system. I tried to boot into recovery mode, but the loading bar loads to halfway. I tried to start in safe mode by pressing SHIFT but it starts right in Windows. When I try to start on Mac by pressing option on startup, I get this error and loads in windows instead

  http://i.imgur.com/MBtFqJl.jpg

  I followed these 2 guides

  http://www.howtogeek.com/186907/how-to-install-Windows-on-a-Mac-with-boot-camp/

  http://TheNextWeb.com/lifehacks/2012/08/05/install-Windows-7-boot-camp-no-Optica l-drive.

  I used daemon tools instead of roxio toast well

  I appreciate all the help

  I'm sure that I've updated to El Capitan before installing Windows

  NVM I fixed it by downloading the drivers of Boot camp for Macbook Air on another computer and ran it on my windows OS

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows xp freezes for a long time during the installation of Windows Update.

  Original title: xp freeze during an update... what to do

  I turned on my computer for the first time in 10 days. When stop he went in update mode (21 updates) and was 19, since yesterday evening around 20:00 is this normal and if not what is my next step since he says do not close during an update?

  Hi MarcyDowning,

  If the update is blocked for hours, then you can try to restart the computer and check if it starts in normal mode.

  If not, then try to start in safe mode and try to perform a system restore:

  Step 1:

  You can check the article to start in safe mode:

  A description of the options to start in Windows XP Mode

  Step 2:

  If you are able to boot into safe mode, and then try to perform a system restore and check if you are able to boot into normal mode:

  How to restore Windows XP to a previous state

  Note: When safe mode system restore, system restore points are deleted.

  Once you are able to boot into normal mode, you can try to install the updates in batches containing updates 4 or 5 at a time and check if it helps.

  For more information, see the article:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

• Remove the system to dual-boot with Windows 7 XP

  I'm under a system dual boot with two hard drives. C is XP Home Edition and F is Windows 7 Home Premium. I want now to delete XP and run only Windows 7. Any advice on how to proceed would be welcome.

  OK, so I failed. Thanks for the help but my computer skills is non-existent. Have reloaded Windows 7 from scratch on the old Windows 7 and I am now reloading my programs & database. W J Cheer and thank you for your efforts.

• After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I am on Windows Vista.

  After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I picked up at an earlier date and reloaded the software TT 3 times with the same result. I tried of caraa start windows Explorer by using the Task Manager, but it does not work.

  Hi AndyCantore,

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.