m9340F: wood to update hp pavilion M9340F elite

Similar Questions

• Update HP Pavilion dv6700 32-bit to 64-bit

  Hello

  I have a laptop HP Pavilion dv6700 currently runing 32 bit of the system. Serial number - dv6880ee.
  
  I would like to know if I can update my laptop from 32 bit to 64 bit, to buy memory for 6 or 8 GB of ram (if possible) and update my video card so that it will work faster and be compatible with games and higher video resolutions.
  
  Thanks a lot in advance, really would appreciate answers. !!

  Hello:

  Yes, you can install an operating system 64-bit on your laptop (Vista or W7).

  Yes, you can install 2 x 4 GB DDR2 (5300 or 6400) memory but it will cost you more than $200 for a pair of chips of 4 GB, and you could probably buy a refurbished laptop, which is better than yours for less than $200.

  No, you can't move the graphics.  The GPU is soldered to the motherboard (there are no "video card").

  You can read that this related thread concerning the upgrade of memory.

  http://h30434.www3.HP.com/T5/notebook-hardware/the-dv6700z-and-dv9700z-will-support-over-4GB-of-RAM/m-p/566163#M42472

• Graphics update HP Pavilion p7-1421

  I have a HP Pavilion p7-1421 desktop is integrated graphic running supplied with the pc. I would like to put in a better graphics card for the high-end gaming, but I do not know what card would be best for my needs. I was watching the GeForce GT 630 2048 MB GDDR3 link here. My biggest concern is that the computer is running 300 watts and I really don't want to mess with power if I have to. Advice or suggestions on a better type of card (better than what he has now / integrated) who would go without having me more power? Any help would be appreciated. Thank you.

  Hello

  Stay with the recommendation that is made by the manufacturer of the video card.  This recommendation is based on the unknown electric charges in the PC, the quality of the power supply and efficiency under maximum loads with the 5 volt and 12 volt bus. Some try to skirt recommendation of the manufacturer of the video card. This may work for a while until the PC is put under load and/or the next update is made and the finger pointing began. It's your decision. The map that you referenced can work with your current diet.  It is a call to close.

• Update BIOS to HP8100 Elite SFF

  Often when I restart, the HP logo appears, the system hangs.  Another time does work ' t mouse after a reboot, and I have to unplug the USB port and use a different port. I thought that an update of the bios can solve these problems.   However, I am not clear when I go to the HP support network. It gives two options for the Bios 786 H 1 upgrade. From v1.04 to v1.05 and other v1.09 for v1.13. I V1.05 on my computor, does that mean it is up-to-date, or can I switch to V1.13? OS: Windows 7 64-bit sp1Windows 7 64 bit sp1

  I don't have a 8100 Elite so can only reference the docs from HP

  BIOS version 1.13 is the latest available for your 8100 Elite. If you look at the history of revisions for this release, you'll notice that it exposes all the fixes and improvements (normally) that have occurred since the first version.

  Curiously, on the Review tab history of 1.13, it shows nothing before v1.08 but this version may not be the initial relase. Earlier versions of the bios are (and only 1.02 is actually documented as initial version in the release notes). I suspect that the reason is simply a change in HP/web documentation. Maybe it's because HP has simply changed the layout of the web page in the "release history" tab to include the actual corrections and improvements for each version (at the time the v1.05-> update 1.08 took place) and rather that fix HP old bios version documents/pages to reflect a new way of presenting history, HP has simply created a new branch of the document and ignored the old versions (with no notes to clarify the question)... But really, who knows why he is documented in two different ways...

  The important thing is that bios v1.13 clearly indicates it is compatible with your elite 8100 sff and corrects a post blocking problem when certain hardware is plugged into a usb port. As you post hang questions, it is best to upgrade to the latest version of bios 1.13. Just take note that with the 1.13 update, he not do it back as mentioned in the release notes...

  And if the bios does not have the grip of the post, then you may have other problems. First try update bios v1.13

• updated my pavilion tx1000 for win 7 and missing a driver. under other devices - coprocessor... help

  Updated my tx1000 Pavilion to Win 7 and missing a driver I can't find online. The missing driver is listed under other devices and called coprocessor... help please

  Hello:

  Here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-51717-1&CC=US&DLC=en&LC=en&os=2093&Product=3185028&sw_lang=

  Paul

• Windows Update HP Pavilion g6 8.1

  Do not know if in the right section for this question

  I was wondering if someone can help me (not the computer mind at all)

  My HP laptop is out of warranty so don't know if I can still use this forum.

  I get a message window 8.1 update that I don't really want to do as I've heard good and bad in this regard. What I have to do this, or is it possible that I can stop the Dungeon of the upcoming message.

  Sheila

  Hi @shedeval ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem with your HP Pavilion Notebook g6 and I was wondering if you need to update to Windows 8. 1. I understand your hesitation to do the update. It will be something you need to address. You can postpone it for a while, but it will be done as it has updates that are required for the Windows System. Microsoft gives a date of 2016. If the update was not done you won't get support from Microsoft. Here is a link if you want to read up on it.

  Now that being said to be honest, I didn't update either. So I've been sitting on it and see it. My granddaughter just used my laptop and she appeared and she did, cause it's from Microsoft. Other than to take some time, the only difference I noticed is that there is now a start button.

  Hope this helps to answer your concerns.

  Thank you.

• Update HP pavilion 23?

  Hello, I got this HP pavilion as a gift and I was wondering if theres a way to update the plug on this issue in any way?

  Here are the specifications for the printer all-in-one HP Pavilion TouchSmart 23 - desktop f213w and his card DID-AAHD3-mother (Ackee2-U). According to the specification, this model supports up to 16 GB (2 x 8 GB) 204-pin DDR3 SO-DIMM RAM . This model does not support discrete graphics, so you need to upgrade the APU (combination CPU/GPU) to get a more powerful GPU. This model supports the following APUs;

  TDP: up to 65W
  A6 6400K (Richland) Dual Core AMD
  A8 6500 (Richland) AMD Quad Core
  Hearts AMD A10 6700 (Richland)
  A4 5300 (Trinity) AMD Dual Core
  A6 5400K (Trinity) Dual Core AMD
  A8 5500 (Trinity) AMD Quad Core
  Hearts AMD A10 5700 (Trinity)

  Integrated graphics card (depending on the processor)
  A processor that supports graphics is required for the onboard graphics to activate
  Provide processors Trinity graphics AMD 7000 series
  Richland processors offer AMD 8000 series graphics

  In theory, more model APU number in series (Trinity or Richland) best graphics.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion dm4-1265dx: does not update HP Pavilion dm4-1265dx

  Pavilion dm4-1265dx has never successfully updated its software. I run the recommended updates that are included in my automatic Windows updates, but not the HP updates have already updated, it always says, "failed." I tried to update directly from the HP site and have experienced the same results. Any suggestions?

  Hello

  Thanks for posting your concern for the Forums for Support and sorry about the problem you are having. To help you the best I would need the failure error code. I will quote the steps to get the code of failure below.

  • Go to the Control Panel
  • Make sure that in the upper right corner of the ' view by ' is selected for both small or large icons instead of the category.
  • Go to "Windows update".
  • You will find on the left in the list 'view update history'.
  • In the list, the status of the various updates would b mentioned in the second column.
  • There will be updates failed, you need to right-click on it and click 'see details'.
  • On the next window, there will be "Error Details" section with code 8xxxxxxxx.

   

  These are the codes that are required. Please write us back with these codes. And also for resolved errors you can try to install the updates individually.

  • You have to go back to the control panel > windows updates.
  • In the list on the left choose "check for updates".
  • Once the updates is enabled, it will be little important and a few optional updates.
  • First click on the important updates and a list would be populated, choose the updates one by one.
  • After an update is installed and the le redemarrage reboot the PC, choose the second update and continue in the same manner.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• Pavilion G6: updated HP Pavilion G6 windows 8 for windows 10

  I hv HP pavilion laptop wid G6 window 8 legal os. So I tried to update the window 10 so please suggest me how I update?

  See the link below

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

• SmartDVD needs an update on Pavilion dv7 notebook

  I have a HP Pavilion dv7 with windows 7 and I just recently tried to play a new blu - ray disc in my drive and every time I do a window pops up asking me if I'd check updates "Yes or no", when I click Yes the window disappears and it seems as if the disc is required to play , but the Update window is displayed again. Y at - it an update which can be downloaded off HP site to avoid this window? I have played all my other blu - ray in this player and have never had a problem before.

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K

• Firmwire update hp pavilion dv4 showing consider replacing your battery

  I just updated the firmwire to the bios of my computer hp pavilion dv4-2165dx laptop and my battery display is consider replacying your battery, bur the information would rather avoid if doesn't happen. How can I turn off?

  TITLE: HP Notebook System BIOS Update (Intel processors)

  VERSION: F.0F REV:
  DESCRIPTION:
  This package provides an update the system BIOS. The update is installed on models of laptops using a supported Microsoft Windows Operating System. A reboot is required to complete the installation

  PURPOSE: recommended
  SoftPaq NUMBER: SP51636
  ENTRY INTO force: 16 January 2011
  CATEGORY: BIOS
  SSM SUPPORTED: YES

  S/O SUPPORTED DEVICES:

  Prerequisite: no

  IMPROVEMENTS:
  1 updates to BIOS to solve the problem that HPSA version 5.0 will signal the battery check battery

  HOW TO USE:
  1. download the file by clicking on the button 'Download' or 'Get software' and save the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

  2. double-click the downloaded file and follow the on-screen instructions.

  Hello foanti,

  Welcome to the HP Forums! I hope you enjoy your stay!

  I understand that the computer asks you to replace your battery. I apologize for the late reply, but I will do my best to shed light on that!

  This error message could be a mistake. Fortunately, Microsoft has released a document with the steps to solve this problem. If you follow these steps, it should cause the error to disappear if it is not true. You can find this document here: you may receive a warning message "Consider replacing your battery" properly on some old HP laptop running Windows 7

  I think that these steps wil solve the issue. Whatever it is, please provide your results. Thanks for choosing the HP Forums. Have a great day!

  Mario

• HP technical support unable to complete downloading updates on Pavilion dv6z

  I am runing Pavilion dv6z laptop and my hp support assistance is unable to complete the download of updates and when I try to run hp technical support I get an error message

  Replace the existing HP Support Assistant with the latest version from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54620.exe

• Unable to access Windows Update HP Pavilion dm4 Windows 7 64 bit

  My setting for Windows Update has always been - automatic.  When I realized that the update had done nothing since April, I tried an update manually and repeatedly getting the message: ' Windows Update cannot currently check for updates because the service is not running. "  You may have to restart your computer", I restarted, tried MS 'FixIt' - no change.   64-bit HP Pavilion dm4 window 7

  Paul - the link was not one I wanted to try. I found this fix on the Forum of MS response:

  Go to Control Panel > click on Windows Update

  Click change settings (upper-left)

  under updates, click on the drop down arrow

  Click never check updates

  Press OK

  Close the Control Panel window

  Then the closing session and Re-start Windows fresh.

  When you're ready, go back into the Control Panel > click on Windows Update

  Click on change settings (upper-left)

  under updates, click on the drop down arrow

  Now make the choice you need for automatic updates

  Press OK when done

  Close the Control Panel window

  Then make a fresh visit to Windows Update.

  If you have already tried the fixes that didn't work, the foregoing can at least get a point better, "but with update errors then you can do a system restore.  I did mine to the last point of "automatic system restore" which was 31/05/12.

  It worked for me and I spent 2.5 hours installing all missed updates.  My computer works better when it is new!

• Problem with update display Pavilion dv6 drivers - 3023ca

  Hello

  I am not well eaten English so I do short...

  I have this type of laptop: HP Pavilion dv6 - 3023ca Entertainment Notebook PC

  I just installed a new version of windows 7 Home premium x 86

  When I tried to install my display drivers her did not work at all

  I had these problems as:

  • I can't play all video files by KMPlayer (or any similar programs)
  • Job of dosen't effect Aero (trouobleshooter said that it is because of my type of graphics card or driver)
  • I can't use the option of sleep to the start menu

  Here is a picture of Deviece maneger:

  

  If the drivers must be installed correctly

  But it still does not work

  I downloaded all drivers (I used the site AMD official and even here I have even updated their Windows) but still I got the problem

  So I used HP Support Assistant to troubleshoot and test my card graph (or display)

  (Home > troubleshooting > graphics, video and display > video check HP)

  It took just a minute to give me this error:

  Test Result: Fail
  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  
  HP Graphics Video Check detected an issue while running. The directx SetCooperativeLevel function has failed. Graphics card may be defective.  Please retest, if problem persists copy down Failure ID code and contact HP support.
  

  So I retested it but same story happened again

  Now you know the identification code

  What should I do?

  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  

  Qanea wrote:

  Hello

  I am not well eaten English so I do short...

  I have this type of laptop: HP Pavilion dv6 - 3023ca Entertainment Notebook PC

  I just installed a new version of windows 7 Home premium x 86

  When I tried to install my display drivers her did not work at all

  I had these problems as:

  • I can't play all video files by KMPlayer (or any similar programs)
  • Job of dosen't effect Aero (trouobleshooter said that it is because of my type of graphics card or driver)
  • I can't use the option of sleep to the start menu

  Here is a picture of Deviece maneger:

  

  If the drivers must be installed correctly

  But it still does not work

  I downloaded all drivers (I used the site AMD official and even here I have even updated their Windows) but still I got the problem

  So I used HP Support Assistant to troubleshoot and test my card graph (or display)

  (Home > troubleshooting > graphics, video and display > video check HP)

  It took just a minute to give me this error:

  Test Result: Fail
  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  
  HP Graphics Video Check detected an issue while running. The directx SetCooperativeLevel function has failed. Graphics card may be defective.  Please retest, if problem persists copy down Failure ID code and contact HP support.
  

  So I retested it but same story happened again

  Now you know the identification code

  What should I do?

  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  

  Hello Qanea.

  I looked at the failure code and confirms the results of the test.  The video card (the card integrated Intel HD) is having problems.  It probably needs to be replaced because the question is right after a reinstall of Windows.

  Have you tried running HP Support Assistant to ensure that the laptop is to install all the correct drivers?  Here is a link.

  Could you provide me the product number?  I can use this information to get you details instructions to replace the motherboard, which is the most likely solution to this question.  This document can show you where it is located.

  If you do not want to repair the laptop you can always contact the HP support directly.  The number for US / Canadian customers is 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  Have a great day.

• Window 8 update apps Pavilion g7

  I used the soft update.   My g7 pavilion has updated the applications a week.  I can't go online because the updates because of my g7 Pavilion to Flash the desktop on the screen of applications again and again. Cannot use the laptop at all.   Geeks said they could clean up for $199.00 (I have not).  Then declared that he can catch up one day (updated).

  I already have windows 8 WHY have updated the mess my computer apps to the top.    Help, please.

  Hi @songofsu,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem with your HP Pavilion Notebook g7 and screen will Flash between a blank blue screen with a task bar and a desktop on startup with Windows 8.1 screen updated. Here is a document that will give you some troubleshooting tips.

  Hope this helps you.

  Thank you.