M9400T: 64-bit?

Similar Questions

• Install Windows 7 on HP Pavilion, m9400t, 64-bit

  I tried in vain for three weeks install Windows 7 Ultimate from Vista Home Premium on my HP Pavilion, the m9400t, the 64-bit office after my hard drive crashed.  I tried clean installs and upgrades on a new 1 to Seagate Barracuda.  I ran the Windows Upgrade Advisor, and he says I can go to the ultimate.  I checked the HP site on the upgrade to Win7 and updated my bios.

  In the case of a clean install, at the end of the installation when it finishes a message quickly (so fast that I had to use a film camera to capture) appears stating "Windows Setup could not configure windows to run on this hardware machines."   After this message, the machine turns off.  Note that only original parts are attached to the machine (no printer, additional USB devices, haven't added any PCI cards).

  In the case of the upgrade, I get a message "this version of windows could not be installed" and Vista is restored.

  I called Microsoft support and they recommended I try a different installation disk and that did not help. They also accompanied me through a reformatting the drive and that did not help.   I also switched the hard drive and that did not help.

  I am at a loss.

  Hello

  Make sure that the Windows license key corresponds with the Windows 7 product that you plan to install.

• m9400t BIOS does not update

  HP posted 5.32 BIOS update today, but I get an error when you try to install it on my m9400t.  I get two boxes of error as follows:

  "install.exe" AFUWIN BENS.32/b/p/c/q

  Cannot perform the specified command line

  I restarted in safe mode, rebooted Windows with everything and even clicked on run as s Adminitrator, even if I was in the administrator account.

  I also downloaded the file three times and even tried to run out of the office with him remains off including sidebar.

  Ideas appreciated as support HP seems puzzled.

  Thank you;

  Al

  Good news, the new link for a Meg 1.67 file worked fine on Vista 64 bit with cable Tuner equipped system.   I don't have to reboot twice for all four cores to be noticed, as the initial start has only shown a CPU two core.

  I wish everyone a happy holiday and without surprises of HP more!

  Al

• New graphics drivers for M9400t?

  I bought a HP Pavilion Elite M9400t desktop reccently and noticed that some of my programs (3D) said that my drivers have been exceeded. Its a 9600GS a card of the 9600GSO OEM I think. I went to the site she and nvidias I couldn't find this map on the list, so I said I find drivers automatically, he said they were up-to-date. On Driveres HP site, I couldn't find the original nvidia unified driver. Are there really any driver updates or anything?

  Thank you

  Message edited by Mikeo179 on 12/13/2008 12:39
  Message edited by Mikeo179 on 12/13/2008 12:39

  Vista 32 bit

  Vista 64-bit

  If one of them does not work, ignore the message and enjoy the game

• How to fix Windows 7 64 bit freezes on the sleep/hibernate?

  My computer freezes constantly just before the sleep/hibernate or just after waking you. I had this experience with SP1 and without. Before you remove SP1, the HD will start to charge about 17 minutes to leave inactive. Almost exact to the minute, it will crash after 25 minutes to leave inactive.

  After removing the SP1, the system will NOT crash before going to sleep. However, it will crash as soon as you wake up. Below is summary dumps of two representative falls.

  032011-28688 - 01.dmp 20/03/2011 16:45:38 (after SP1 has been deleted)
  PAGE_FAULT_IN_NONPAGED_AREA 0 X 00000050
  fffff981'0 c 002690
  00000000 00000000'
  fffff880'0143f4e0
  00000000'00000005
  NTFS.sys Ntfs.sys + c9836

  26317 031911 - 01.dmp 19/03/2011-21:20:34 (before SP1 was removed)
  PAGE_FAULT_IN_NONPAGED_AREA 0 X 00000050
  fffff981'13 has 02690
  00000000 00000000'
  fffff880'01239460
  00000000'00000005
  NTFS.sys Ntfs.sys + c47b6

  As a backdrop, the system:
  HP Pavilion Elite m9400t
  Intel Core 2 Quad Q6700 @2.66 Ghz
  6 GB DDR2 2400 (Micron Tech and Hynix Semiconductors)
  ATI Radeon HD 3650
  750 GB HD Samsung HD753LJ
  OEM: Vista Ultimate x 64
  Current (academic): Win7 Professional 64-bit
  H/w bought November 2008
  Operating system: any new installation

  Programs:
  In addition to Windows, I just installed Office, Chrome, Firefox. I have installed but removed ScanSnap of UBWALL scanning software, Windows Live, Windows Security Essentials

  Devices:
  No devices are attached

  Tests already performed:
  Memory tests (memtest86, memtest86 +, WIndows)-no error
  Chkdsk/f/r (twice) - no error

  I'd appreciate any help. Thank you.

  Updated - I deleted Windows 7 Pro and re-installed Vista Ultimate OEM. It works perfectly. This excludes any possibility of h/w issue.

  I think to re - install Win 7 Pro and see if the error. Any ideas/suggestions?

• m9400t: failed to get sorround audio output audio over HDMI, stereo only

  I recently bought a computer desktop m9400t, equipped with a hdmi card. After you connect via hdmi to my receiver (which is connected to a HD TV) and select the HDMI as my audio device, I am able to get sound via HDMI, but I get stereo sound. I can't find any possibility to output its 5.1 or higher via hdmi. Please help me with this problem. Here are some relevant information on my computer:

  - Range of PC HP Pavilion Elite m9400t
  -Genuine Windows Vista Home Premium with Service Pack 1 (64-bit) digital cable tuner
  -Intel Core 2 Quad from Intel Q9300 (2.5 GHz)
  -512MB ATI Radeon HD 3650, DVI, VGA, HDMI

  Thank you.

  Message edited by ae_tx on 09/12/2008 10:08

  Your PC has shipped HD ALC888S. I scoured the Web and found someone who has exactly the same problem with audio built-in. Solved by updating the embedded HD codec. Update driver http://www.realtek.com.tw/downloads/ .

  Realtek posted the new driver 2.1 01/12/08 so it can do the trick.

• Safari in 32-bit mode in El Capitan

  Hello

  For school, my children need access to the Web site that runs 'Shockwave '. They are not currently open.

  Navigation online suggestions say run it in 32-bit mode, with instructions on how to do it.

  However, when I access the app Safari (version 10), and "Get Info", the check box option is not there to run in 32-bit.

  Does this mean that I can't go back now?

  Thank you.

  Steve.

  With Safari 10, you cannot return to running in 32-bit mode, if that's what you're asking.

• Can I boot in 32-bit mode?

  MacBook Pro 17 "(8,3) i7 2.2 GHz Quad Core 16 GB DDR3 750 GB HD OS X Mavericks 10.9.5"

  I am trying to connect to a USB 1.1 device which has incompatible firmware with 64-bit OS X.  The camera manufacturer's instructions for a workaround that allows access to the device to update the firmware, providing support OS X 64-bit.  Of workaround requires me to start in 32-bit mode by pressing the '3' key and '2' during the start cycle.  They show how to check and see if your Mac is in 32-bit mode, but their example does not match my window, and my machine doesn't seem to be in 32-bit mode.   I found several references to this '3' start + "2" keyboard shortcut, but nothing official from Apple.

  Please do not recommend upgrading the OS.  The software I'm using is not supported by the manufacturer past Mavericks.

  Thanks in advance for any help.

  If the software is compatible with the Mavericks like you state that the developer shows you should be able to use the device in 32 or 64 bit.

  When using any modification of the startup of the suggestion of anyone on the internet always proceed with caution, and damages are exclusively your own:

  Method 1: Start key combination
  This will bypass the default mode and use a different mode for single session.

  • If your Mac uses the 32-bit mode by default, press 6 and 4 at startup
  • If your Mac uses 64-bit by default, press 3 and 2 at startup

  Note: Your Mac will return to the default mode the next time it starts. Method 2: Setting disk
  This will change the default mode used by your Mac when starting. For 32-bit mode, use the following command in a Terminal:

  • sudo setkernelbootarchitecture systemsetup - i386

  For the 64-bit mode, use the following command in a Terminal:

  • sudo systemsetup setkernelbootarchitecture - x86_64

• iMac (retina 5K, end of 2015) in 64 bit mode?

  How can I tell if my iMac (retina 5K, end of 2015) runs in 64-bit mode or not?

  10.11.6 OS

  Y at - it software that would let me set it to 64 or 32?

  Thank you.

  Mac

  All iMacs for years past were 64-bit, yours is. I believe that there is evidence in the application of the information system, but you will need to do some research.

• iTunes 64-bit in Windows 10 installation problem

  Try to install using the various links:

  1 Download iTunes 12.4.3 for Windows (64-bit-for older video cards)

  2. http://www.apple.com/in/itunes/download/

  Two of them are in error when installing as shown in the attached snapshot.

  I would like to help on this please.

  

  bharadUN wrote:

  Try to install using the various links:

  1 Download iTunes 12.4.3 for Windows (64-bit-for older video cards)

  2. http://www.apple.com/in/itunes/download/

  Two of them are in error when installing as shown in the attached snapshot.

  I would like to help on this please.

  

  I just got an "unsigned driver" error and wouldn't install message. He suggested then I select "Download only" and try to install it. I don't know if I'm ready to try again. I have the latest installed Win10.

• is my i mac 32-bit or 64-bit?

  How do you determine if my office iMac processor is 32 or 64 bit?

  It is 64-bit, or you cannot run 10.9.5.

• 12.4.3 iTunes for Windows 7 32 bit

  I do you

  You try to download it? Download iTunes 12.1.3 for Windows (32 bit)

• Y at - it a 64-bit version of 43 FF and it's ready for primetime?

  When FF 42 came out the information I had was that the 64 bit version for Windows had not all plug-ins of the 32-bit version. I was left with the impression that he was still developing. At FF 43 moved beyond that?

  Yes, I think that it is correct.

• Do you need to uninstall the 32-bit version of firefox to install the 64-bit version?

  I tried to install the 64-bit version of Firefox and it seemed just overlay the 32-bit version. Is my 64-bit version now or still the 32? I don't know how to say or how to put in the 64 bit one if it did not work.

  You have posted here with the 64-bit version of Firefox 43.

• Whitelist Google Earth Plugin for FireFox 64-bit?

  Would it not possible to whitelist, this plugin for 64 - bit as has been done for silverlight?

  Hi berwyn, mozilla won't because the plan published (as do other browser vendors as well) is completely remove support for the npapi and move the web content plugin. the win64 version already takes this kind of slate.

  https://blog.Mozilla.org/futurereleases/2015/10/08/NPAPI-plugins-in-Firefox/