Mac 10.5.8/HP Photosmart C4280 printer ORDER (will scan and copy ok)
Help! My printer scans and copies, but will not be printed. I tried all the suggestions on the HP site, but none of the solutions proposed ago solved my problem. How to DÉBOUCHERAS my printer?
We will uninstall the software by using the "scrubber":
Go to Applications/Hewlett Packard / click Uninstall HP
Click on continue
Highlight your device in the left pane
Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
Click on continue and let it finish
Restart your Mac
Now run a software update.
Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.
Tags: HP Printers
Similar Questions
-
Printer will not print but will scan and photocopy HP Photosmart B109n-z
Hello
When I go to print a document I get on the error message - print, we use the printer on a wireless network
Don't know if this has anything to do with it, but installed the new BT Home Hub 3 yesterday previously had the BT Home Hub 2 and put in 2 new cartridges except that nothing has changed
I'll be very grateful if someone can help me here
Concerning
Iain
You will need to re - connect your printer to your new BT Homehub. In the HP folder in your programs, run the printer setup and software to restore the link.
-
Photosmart C5180 scanning and copy problem
Scanning and copying service, computer and also the printer button produce entirely black (not empty) pages with lines vertical and horizontal of different shades of black.
Uninstalled, reinstalled, used doctor scan, download software uptodate and the driver. What can I do else?
Author: heborn
Hello 11540.
Try to reset the all-in-one (turn off and on again).
Then try to copy using the control panel buttons, but open the scanner cover to see if the light is turn on. If this isn't the case, then I'm afraid this is a hardware failure and you will need the service unit.
See you soon!
-
7640 5660 envy print, scan and copy in color, b &; W and grey scale?
Hello:
The 7640 want 5660 print, scan and copy, color, B & W and grey scale?
I was told that gray balance is not supported. (I think this might be the wrong information.)
What about FAX (7640)... B & W, color and Gray Scale?
Thank you
DaleBr
Hi @DaleBr.
Welcome to the Forums of HP's Support. The information you are looking for are under the specifications of the printer on hp.com.
They can scan and copy in black and color only. There is no option to gray scale.
I would like to know if these links worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!
-
Is there a compatibility program to activate Windows 7 work with the HP Photosmart C4280 printer
The OCR program in the software and the drivers will not scan function when it is installed with a HP Photosmart C4280 all-in-one"printer.
Is there a compatibility program
Most often when a device does not work, it's because the driver has been corrupted.
Try reinstalling your.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1
http://captaindbg.com/how-to-update-drivers-on-Windows-7/
Have you tried to install in compatibility mode?
To run in compatibility mode do the following:
Click with the right button on the installer > properties > compatibility > chose the operating system
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1
-
HP Photosmart 5520 - can print but scan and copy the work of doesn´t
Hello
I just bought a HP all in one Photosmart 5520. It works fine as a printer, but when I scan or copy I get a 'white' scan / paper in white. And Yes, the text on the paper was facing the Analyzer anyone know whatcould wrong?
Thanks for the reply AndersRH.
Sorry to hear about the issue. Because it seems to be a hardware malfunction, I suggest you call the Tech Support of HP. They may be able to give two options for replacement or trade in options.
If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.
Take care
-
HP Officejet Pro 8610e: cannot print documents I scanned and saved as pdf files
All of a sudden I cannot print I scanned and saved as pdf files. I get a message indicating that the printer is "Impossible to convert the PostScript file. Don't know how to handle, but I have to be able to print the docs I'm scanning and saving in pdf format. Can someone help me?
Thank you
GTR
Hi @GTR3,
Welcome to the Forum from HP Support.
I see that you are unable to print the PDF scanned documents with your HP Officejet Pro 8610 e-all-in-one printer. I would like to help.
You are able to print any other format PDF on the Mac, or the question is just limited to your scanned PDF files? Whether the soft friendly PDF work with - Adobe Reader or Foxit Reader?
In the meantime, I recommend you try the following steps:
- Uninstall your printer - click here for instructions.
- Fix permissions of the disc on your Mac - click here for instructions.
- Once you have finished running the utility above, restart your computer.
- Finally, click here to reinstall your printer.
Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.
Thanks for posting in the Forum from HP Support. Have a great day!
-
HP Envy 5530: HP Envy 5530 can print but cannot scan or copy
Hello
After that I moved into a new apartment my 5530 desire is not scanning or copying (but I can print wireless without problem).
I have already tried:
-install the updated drivers
-perform the reset
-activate the static IP address
-newtork reset through the HP utility.
Please advise how can I proceed to get my printer working properly again.
Kind regards
Tiziana
Hello
Please try the steps below...
- While the printer turned on, unplug the power cord from the back of the printer.
- Wait 60 seconds.
- Plug the power cord printer directly to a wall jack (bypass surge / power strip) and then to the printer.
- Now, make a copy.
- If the problem persists, select SETUP (wrench) > tools > Restore Factory Defaults
- Wait 30 seconds and then try to make a COPY.
- If the problem persists, open the lid of the scanner, and then press black COPY. Check if the scan transport moves and it's on.
- Transport scan is not turned on or move in all, then its time to replace the printer.
Call the HP Technical Support for assistance. 1-800-474-6836 (USA)
-
Photosmart 3210 all in one: Scan and reinstall the program failures
Printer isn't online and firewall is on and no network. Printer and scanner going good since 2006 until I tried to scan a negative, I think for the first time in its history. Scan bar will quickly about 2 inches and lamp turns off and printer says to stop, but this isn't. Had to unplug, but printer would reset with all functions (except movie option). Uninstalled and reinstall failed with the error situation code 03215762. Print function works with other programs and copy function works, just can't sweep, and there is no solution Center, could not reinstall. Resettlement goes to 2% with the status - stop services - bogs and Print Spooler Service and will remain bogged down for hours until the end with the Task Manager.
During the forced relocation ends and said deleting files, another error situation code 06458626 comes up with a few lines comes from installation error logs. Help would be wonderful.
Due to personal obligations, could not work on reinstalling printer until this week. Put a link to MS and I've tried suggestions there - .NET updates, enter the registry and delete some files and a work-around suggested without success. Next I googled "Can not stop spooler on MS XP SP3" and as choice went to forums.techguy.org/windows-xp/897775-can't-stop-spooler.html, Harry 32, January 28, 2010. This guy had a sounding similar problem and his solution worked. MS Fax in windows, computer components unchecked rebooted, went to spooler MS services, stop selected, and he stopped. YES! Then I ran the new drivers you sent and installed the program without glitches. YES, once again! (actually when install stopped and said spooler was arrested and I wanted it to be fixed and started then the installation can continue; naturally, I selected Yes.) I scanned a photo, printed and made a copy successfully. However, I tried again to scan a negative from the solution Center and the button on the Panel of the printer without success. I'll close this as 'select solution' and start a new discussion of assistance on the issue of negative scan. Very gratedful for all your help. I'd never know what Google if you had not discovered in troubleshooting spooler problem.
-
I have printer HP C4680 scans and copies to the Jeg can be converted to Pdf for printing.
How to convert software for the HP C4680 printer print queue? See the topic shown.
Hello
Why it prints as jpg files, I don't know, but you should be able to scan and print as a pdf with the following product:
http://en.pdf24.org/pdf-editor.jsp
You can download and install on your computer. You can open it to scan in PDF format and you can also print documents in the form of PDF files. A good thing: you can also use it to edit PDF files.
Kind regards.
-
C4780 all-in - one HP printer - Hung in scanning, Photo, copy state - can't print
Somewhere, I am in a State where "Scan, Photo, copy" lit. Recycling power does not consider out of the State. Button cancel-X and the 'Back' button are not lit. I feel in queue to the top, jon, but cannot print until I get out of this mode. Recycling power does not help. I don't want to scan, Photo or copy. How can I get out of this mode? Help, please.
OS: windows 7 Pro
Printer: C4780Disconnect the power supply to the back of the printer and the wall. Wait 2 minutes, plug it all back in and turn on.
-
Device will scan or copy, but does not print a document
SCART settings will not evoke the settings for the print options, only the copy options?
Hello
Contact the manufacturer of your printer for a manual on how to use your printer and whether it is compatible with vista
If it is compatible with vista
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
Canon MP280 inkjet do not print, but will scan. Possibly caused by Avast
A few days ago, I changed the ink in my Canon printer. When I went to print a document, all of a sudden my Avast Anti Virus started sounding "threat detected - don't worry, we have set." I saw in the popup of Avast box that was connected to my printer, but before I had time to think to click on it to see what the problem was, it was gone again.
Immediately after, I try to print only resulted in almost nothing happens. The dialog box print which usually appears (to show the ink levels and documents in print etc) burst, but for literally a mili second and then his party once again. Nothing appears in my impression (QC) I cannot print web pages, documents, images and video - no matter what.
I guessed it was to do with avast, but I found nothing at all in avast associated with my printer. I tried to disable Avast and all firewall, but still nothing. I uninstalled Avast, still nothing. I reinstalled my printer, still nothing. Tried all the usual troubleshooting and diagnosis/repair printer, but never any anomaly. Scanning still works fine.
Anyone know what I can do? Hopefully, its driving me crazy! :(
Hello Rovers,
Thanks for posting your query in Microsoft Community Forum.
- What were the troubleshooting steps you have tried, when you mention 'usual troubleshooting and diagnosis/repair printer?
- You get the error message? If Yes, what is the exact and complete error message you get?
The problem may occur if the printer driver has corrupted or unstable after safety analysis. So, I would suggest trying the following steps and check if the problem persists.
Method 1:
Check out the following link to diagnose and solve printer problems:
Diagnose and problems printing and printer
Also, I suggest you try to run the printer Troubleshooter integrated.
Open the printer Troubleshooter
If the problem persists, go to method 2.
Method 2:
Try to re - install the drivers for the printer from the following link.
PIXMA MP280: Drivers & Software
Note: Select the correct operating system architecture and install the complete package of features.
Try to communicate with the printer after installing the driver.
See also: find and install the printer in Windows 7 drivers
Additional information:
Hope this information is useful. We know that if you need help, we will be happy to help you.
-
How can I get my Lexmark printer scanner to scan with windows 7?
wnaza wrote:
> How can I get my Lexmark printer scanner to scan with windows 7?Contact Lexmark to get Win7 drivers for devices and software for it
specific model scanner.--
Bruce Chambers
Help us help you:
http://www.CatB.org/~ESR/FAQs/smart-questions.htmlhttp://support.Microsoft.com/default.aspx/KB/555375
They who can give up liberty for a little temporary
n FranklinA lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell
The philosopher never killed the priests, while the priest was
has killed a large number of philosophers.
~ Denis Diderot -
Mac OS Lion 10.7.3 - can't get my HP photosmart C4280 print!
HELP Please! You just bought an IMAC running OS Lion 10.7.3. Site Web of HP says to download the drivers from Apple,
tried and got "an error occurred while trying to add the selected printer. Impossible to find appropriate software
for your system after a software update running! "So I called Apple and they said to have to download the driver on HP Site, done
who and when I went to print, printer did not show in the window of the printer, so I clicked on add a printer and then the window come to downlard the missing files and that's when I got the previous message. Apple reported that they cannot do what I needed to contact you!
Thanks in advance!
Thanks for your help! I've resorted to be on the phone with HP for more than 2 hours last night and they couldn't always fix it!
So I called Apple again and was on the phone with them for 1 1/2 hrs. Come to find out when I migrated my old computer to the new one, he must have spent some files that enamored new computers printer files.
So I had to reformat the hard drive and reinstall Lion. YES it works now and I'm trying to
pass my files needed. Being careful not to put all the old files!
Thanks for your help!
Maybe you are looking for
-
Siri includes my order, but then the dials fake name.
I have always made good use of the Siri, especially when it comes to using siri to dial names. Last week, I noticed that Siri has done something really weird when I use 'his' to call a contact. This morning I "asked" Siri "Call Jackson Werner Mobile
-
Hello I have an iPhone 6 s (which can take direct pictures) and an iPad 2 (both running iOS 9.2.1), as well as an iMac running OS X 10.11.3 and Photos 1.3. I noticed that some of my live (all older) photos became videos. For each, I get a completely
-
Satellite A210 - 16G - problem of CPU frequency and memory
Hey guys,. I had a problem with my laptop I can't solve, since I installed windows 7 RTM x 64 version.I noticed something is wrong after finding that my Windows experience index has fallen to 2.7 instead of 4.5, I used to have on Vista. For those who
-
Simple application in JDE launch error: NoSuchFile.java
Hello I created a simple application with the JDE, but I can't run it.When I do, with the JDE, I get the following exception: Eception thrown Exception - RuntimeException - C:\NoSuchFile.java I set a breakpoint at the beginning of my Midlet class, fo
-
Get the current location of the user.
I want to create an application in which the current position of the user should be displayed. Can someone tell me the logic (connection only part) If cannot tell the code...