MAC not print not WiFi

Similar Questions

• OfficeJet Pro 8610: Mac and printer do not connect

  Hello

  I installed my printer operated a couple of months and it as a printer wireless to my MacBook. Everything went very well.

  Yesterday I tried to print a document, but my Mac was telling me that the printer was not connected, even if the two were connected to the same wifi. I turned off both devices, reconnected the printer for wifi on the way home the password, but nothing has worked. I decided to 'remove' the printer from my Mac in order to reinstall it again. The software is installed, but I'm stuck in one step:

  The printer is not and so I cannot connect my printer with my Mac, instructions say that you could also connect thorugh the printer using the Wifi the Printer Wizard. I plugged the printer several times to my wifi at home but I am not able to connect it to my computer, it does not find it.

  I am really grateful for any advice!

  Thanks in advance.

  Best regards

  Julia

  Welcome to the HP community @JETaubenberger ,

  I read about the problems that you encounter when you try to connect your Officejet 8610 to your Mac via the wireless network. I have a few ideas in mind that should help connect you again!

  • Try power cycling network devices:

  Turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).
  Plug the router back in and wait another minute, turn on the printer and the computer and attempt to print something.

  • If the connection still does not, try the following steps in the following order:
  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Install the complete driver here: HP Officejet Pro 8610 e-all-in-one printer
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers

  You must be connected at this time, please let me know the result!

• I get "printer does not ' when I try to print via WiFi. Everything seems to be set up properly

  I went through setting up to print via WiFi.  When I try to print I get printer not responding do not.  When I boot I have a message "the printer is online."  I get a box showing that I am low on ink.  I can use the features of scanning from my laptop.  I can't print.

  I have a printer Canon MX882

  Lloyd

  Hi Lloyd,

  Thanks for posting this question in the Microsoft Community.

  To provide a proper resolution, I would need more information on your side.

  1. what operating system is installed?

  2. what security software is installed?

  3. don't you make changes to the computer before this problem?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  We can refer to this article and check if that helps.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• Printer see wifi, laptop sees wifi, but does see not computer mobile printer

  I'm trying to connect my new Color LaserJet M175nw MFP 100 all-in-one for my laptop. I have already set up via the USB port on my desktop and which took place without a hitch. I got the printer on wifi (I can print a summary of the IP Config report from this list, the printer network and more precisely to say that it is connected to my network) but now I'm having problems getting my laptop to 'see' the printer. Whenever I try to start the installation, I get the message "can't find product (s). I have my firewall and I tried using the methods of troubleshooting on the HP site but nothing seems to work.

  I tried to manually add a printer through Windows, but is not able to find the printer by IP address or host name.

  Please help before I beat the nice new printer with a bat '' bureaus '' - style.

  OK, what operating system are you using?  What router?

  You have the HP update software on your computer to the printer?  Download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

  Once installed, follow these instructions: http://www.hp.com/global/us/en/wireless/reconfiguring-system-help2.html

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• Hi, I have adobe (downloaded) 12 for windows pc elements 7, but want to transfer on mac (not not keeping the pc). How?, please.

  Hi, I have adobe (downloaded) 12 for windows pc elements 7, but want to transfer on mac (not not keeping the pc). How?, please.

  Download the Mac version and use your serial number to acrivate it.  As long as your license is mulriplatform it should work.

  PES 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

• You can print with a 6s iPhone using a printer no Wifi

  How do you print with a 6s iPhone using the printer no WiFi?

  Hey,.

  I always got WiFi printers in my house and never had to deal with this problem personally, but the following CNET article seems to answer this question:

  http://www.CNET.com/how-to/how-to-print-wirelessly-from-your-iPhone-iPad-or-iPod - touch.

  My printer is a HP OfficeJet 7500 E910, which allows me to print from any wireless device and my printer is plugged only the power source.

  Also, I did not read the entire article carefully, but I would venture to say that if you have a cable to connect your printer to your wireless router, it should appear as a network printer. If your iPhone is connected to the same wireless network as the router is mounted, you should have this success. It would still be printing wireless from your iPhone, but just a different configuration.

  Hope this helps, and feel free to respond with thoughts or questions!

  Thank you

  Michael

• Officejet4500: coffee bar customers need could print over wifi

  I am a Manager cofeehouse bit and I need some customers could print over wifi on my Officejet4500 (without network or wifi model).

  I tried to add the printer to the router printer server. Apparently, he adds printer to the printer server list.

  But, despite this, some applications like Printbot, Cloudprint, Printershare, Airprint, or HPePrint are not able to do the job.

  Some, by his difficult configuration. Others, because they do not see the printer.

  What would be the easiest and most simple way to print for my clients?

  Any help would be very much appreciated as I really need to solve.

  Hello

  HP offers only the mobile features of the printer to printers connected Networks, such is not supported for a USB connection.

  A print server allows the sharing of a printer with computers, and not with a mobile device.

  You can plug the USB to your PC, then install a 3rd party software such as PrinterShare share the pritner through your PC, but the nay customer will have the PrinterShare app which is not a freeware.

  For easy results my ewcommendation would receive a new network printer with support for mobile devices, current printers offer integrated solutions such as AirPrint or Android Printing Solution for printing without installing apps for most later versions of her verisons mobile OS, as long as procedures connects to your network which the printer conneted to , you such for a low price can collect these days, taken network printers support more recent offers such a...

  Kind regards

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• disappointment that printshare cannot print with wifi

  Hello

  is it me or is it a huge disappointment printshare cannot print unlimited pages in wifi connect printed. only 20 pages? is it serious? Anyone know of any alternative to print via wifi unlimited times or I just have to export all to gmail in the form of png images and then print from my computer.

  The printershare limit is due to the fact that Lenovo has not in fact given us full of printershare versions, but rather the same demo that you can download the free market... Please see my thread on purchase if you want to go this route, because the on-board Lenovo version is some kind of scam (same as the regular version of the Android market but you can not use it on other devices).

  Lenovo has been quite misleading in their marketing when he came to this apps bundled $ 150.

• Adding a printer through wifi

  Hi people.

  How to connect a printer using wifi?

  Hello

  Please contact the Microsoft Community.

  The information provided by you are not solving the problems.

  What is the brand and model of the printer?

  What is the version of Windows installed on your computer?

  I wish that refer you to this article-

  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-7

  We know if you need help.

  Thank you.

• Multifunction color HP LaserJet Pro 200: I can't print to my HP printer using wifi, it was working and stopped after the electricity blackout

  I got my printer to print via wifi and it was working fine but as the power went out a few seconds this morning, it will not be printed.  I even reset the wifi but does not always print.

  Well, for this issue:

  1. Make sure that the printer is plugged directly into a wall outlet, not a surge protector.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  4. When the lights come back on the router, turn on the printer.

  Now, on the printer, click on the wireless icon that looks like a radio tower. If you see a line indicating the status: not connected, click on settings and Wireless Setup Wizard to connect the printer to your network.

  Finally:

  1. Click on start and open devices and printers.
  2. Right-click on any icon of your printer listed.
  3. Click on remove the instrument.
  4. Click Add printer, and follow the prompts to add a new queue for your PC.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Envy 100 D410a can't see mac apple printer so don't scan at him

  I installed the software from the disc supplied and all functions of work outside the mac function analysis. He couldn't get any computer to scan to. I use a wireless through a router connection cable Netgear WGR614. My mac is a Mac OS 10.6.6 MacBook Pro 2.4 GHz Intel Core 2 Duo 4 GB RAM.

  I followed the HP Web site suggestions and uninstalled the HP, dumped preferences software, repair disk permissions and reinstalled the correct software from the Web site. I also got an update from HP printer via the software update later and gave the mac and printer an IP address manually.

  The scan-back function found my mac but the software scan-back on the mac went into a loop, and I had to force quit. I decided to reboot the wireless router, the mac and the printer but the printer is returned to a State where he could not find the mac.

  Discussion on the HP site suggests that PCs must be set to "Enable analysis for computer" whenever they are turned on or awakened from his sleep. It notes, however, that it is not necessary for macs, that it happens automatically.

  Please can someone help? Thank you very much.

  Hi Randy.

  Thank you very much for your advice.

  I followed the road of:

  Full CV uninstall-> restart mac-> add a printer in the preferences and download the latest Apple HP drivers for 10.6-> complete HP drivers from the HP website.

  The scan for mac worked worked the first time.

  Amazing it is really as simple as the order in which the different drivers are installed. Sounds simple in hindsight, but there was no way to guess that at time of initial installation.

  I am very grateful to you - it was driving me crazy!

• CM1415fnw ctrl panel will not allowing printing wireless (wifi) when you are connected to wired ethernet

  Panel Display control for CM1415fnw says that it will not allow for wireless (WiFi) network card while connected to the wired Ethernet cable.  Was able to get the printer to activate the network WiFi once the Ethernet cable has been disconnected. and there he has disabled the connection once again Ethernet has been reconnected.

  How this printer can be configured to allow both wireless and wired print 802.11?

  Thank you.

  Hi CM1415fnw_help,

  You can't the connected printer Ethernet & Wireless at the same time. The only option is to connect the printer USB & Ethernet or USB & wireless. It is not possible to have two networks connected at the same time. Let me know if you need help.

• MX330 printer will not print. power WiFi ok

  I CHECKED POWER and telephone lines the printer will not print, the printer is not reconigzed

  Hello

  • What version of Windows are you using?
  • What were the changes made before the problem occurred?
  • You receive an error message when printing?

  You can check these links:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: this link also means on Windows 7