Mac printing

Similar Questions

• Officejet 6310 does not print in color but Mac prints a color scan

  Officejet 6310 does not print in color but Mac prints a color scan

  Awesome!

  Thank you very much.

• I have firefox installed 10.0.2, but whenever I open firefox, I get a message that says that I do not currently use this version and I need to upgrade to the latest version and why firefox will not support mac print coupons

  my firefox info shows that I am using 10.0.2, but I get a message repeated when I open saying that I do not use the latest version.

  Though even the printer of coupon says mac firefox supports this facility it does not allow me to print it.

  Hi cleopt,

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. This page is no longer maintained by Google.

  You should try to change your home page:

  topic: Home

  If you don't know how to change the home page, you should take a look at the Knowledge Base How to set the home pagearticle.

  Hope this helps

• 4630 HP for Mac: HP 4630 for Mac printer will print but no departure will scan

  4630 for Mac HP printer will print but will not scan. New & installed software that recognizes the print configuration and computer. When ask to scan get message see this "scan to PC". Can't find where to put "scan to computer".

  Thank you

  Hi @venny1,

  Welcome to the Forums of HP Support!

  I see that you are unable to scan to your Mac computer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  To activate the scan of the computer, see the procedure below:

  Restart devices and check the settings of scanning driver

  Restart the computer and the printer can restore the connection scan options analysis, and then check the settings for scanning on the Mac.

  1. Turn the printer off.

  2. Make sure that the printer power cord connects directly to an electrical outlet and not by a limiter the power strip or surge protector.

  3. Close all programs currently running on your computer, and then shut down the computer.

  4. Turn on the printer.

  5. Turn on the computer.

  6. On the desktop, double-click Macintosh HD, click Applications, click the Hewlett-Packard or HP folder, and then double-click the HP utility.

     NOTE: If the HP utility is not in the folder, go to the step install the software for your printer HP.

  7. Under scan settings, click Scan of the computer, and then make sure the enable scanning to computer checkbox is selected.

  8. Try to scan.

  If the error persists, proceed to the next step.

  Follow all the steps in this guide, if this problem persists:

  • HP printers - WIRELESS card Scanner is lost (Mac)

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Photosmart 5510 - wireless Mac - printer offline

  Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Mac printing wrong tray HP C7280

  I have a new Mac with the latest OS. He found the drivers for my Hp C7280 printer without problem and prints fine for the main tray. HOWEVER, even when I select the photo tray - it always prints on the main Board... Help!

  Hello

  Check the Page Settings and parameters of paper as follows:

  1. first of all, change the paper size setting in the Page Setup window:

  On the file menu, choose Page Setup. The Page Setup window appears.

  2. click on the blue arrows next to the paper size, select 4 x 6and then click OK to accept the settings and close the window.

  3. now, change the paper tray and size settings in the print window:

  On the file menu, select print. The print window is displayed.

  NOTE: Tprint window it could be reduced to a minimum. Click view details to see all the available parameters.

  4. in the extended print window, click the arrow next to the name of the program to see the panels available.

  5. click on the paper/quality Type. The Paper Type/quality Panel will appear in the print window.

  6. Select the document tab to change paper type, print quality, color type and the source of paper for printing.

  7. click on the blue arrows next to the Paper Type menu, and then select Photo Paper 4 x 6 from the drop-down.

  8. If you want to change the print quality for the photo, use the quality tab to select the appropriate quality.

  9. If the photo paper tray is separated the main feeder, click on the blue arrow next to the Paper Source, and then select the Photo tray.

  If the issue remains unchanged, please specify the version of the driver:

  Go into System Preferences > print & Scan.

  Double-click C7200 print queue, and then click the Printer Setup tab and you will find listed the driver version

• Wireless - problem with the integration of MAC printing

  Hello world.

  Just bought a Macbook pro and can't seem to recognize my printer.

  Network devices:

  -Router Belkin WLAN

  -MFP HP Laserjet CM1312 - with HP 2101nw Wireless G (printing and scanning even works fine without thread!)

  -Acer laptop with XP Home (used to implement the 2101 wireless)

  -Acer Netbook with XP Home (later added to the network, no problem with printing, Setup a 5 min)

  Antivirus software: Avira Premium Security Suite on both XP

  Encryption WPA - PSK, mac filtering.

  The Macbook connect to internet, but nothing happens when I try to print. I tried to stop the argument that Windows is sometimes initially. Frustrating experience with the Mac to date.

  Can anyone help?

  We have found the solution:

  The HP 2101 nw G wireless driver must be installed (we had to try the installation twice).

  There is no 10.6 driver available on the HP site, but we tried the driver available however and to operate. Printing works perfectly well, we have simply not tried scanning so far (I think that it won't work), but the first step is done.

  Would be nice if HP could not work on the drivers updated to 10.6.

• wireless connection between Mac printer & hp

  Hi, I am unable to set up the connection between the Mac and the printer hp 1102w, known problems thereby? I couldn't figure it out through the user's Guide... Thank you

  Hi cpagliuca,

  Thanks for letting me know you are using 10.6.

  I'll give you the steps for 10.6, they are a little different.

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open in other browsers.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  (hold down the x key and when the printer makes a noise to let go of taken)

  Plug the USB cable from the printer for Mac and install the printer software.

  (if it isn't already then skip this step)

  Go to Apple, system preferences, print and fax.

  Double-click the P1102w.

  Open the utility.

  Click Printer Setup.

  Click config HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the print and fax.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello p1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Remove the USB driver, then add the network printer.

  If there is anything else I can help you with just let me know.

  Good day.
  Thank you.

• view in Mac print queue

  C4280 all-in-One used on a Mac 10.7.3

  I can't view the print queue. The printer never appeared in Manager devices, only the scanner and copier. No problem with them, but I would like to see the printer. I found the location of the print queue in the system preferences, but when I click Open print queue, nothing happens. I know that there is a long queue because when I try to print something, I get an old document instead.

  I just want to remove the queue and know how quickly any time, it is needed. HP sells a lot of ink for me to print the things I don't want!

  Thanks for your help.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• New mac - printer not recognized when I install it.

  Hello.

  I have a 'new' Mac Book, Mac OS X, version 10.6.7 and I try to install my regulatory model number of all-in-one series, S/N: CN69EGFOWW, HP Deskjet F380: SDGOB-0601. I still have the instalationscd. The instalation fine until I get to the Setup Wizard. Then he can't recognize my HP device (and it is connected to the computer :-). I use a USB port. I tried to restart the computer, but it does make a difference.

  Any body know why?

  Thank you!

  I thought of it on mine. I went into Preferences system for printer and here he acknowledged. I got the printer/scan works this way through.

• PSE 6 for Mac printing issue

  I bought a MacBook Pro to work with my photos.  I bought Photoshop Elements 6 and have been able to do everything that I need until I go to print.  I find nowhere properties choose I want to print on photo paper.  When I used my PC in the past, I've always had the option when I went into Page Setup of choice properties, and then on a list of at least 19 paper options such as plain paper, Photo paper, paper Photo Plus glossy, Photo matte, Fine Art paper "Museum Etching" etc... to name a few.  Have I not these same options somewhere, that I have not been able to find on my Mac I had on my PC?  I tried everything I can think of.  Would appreciate help and advice.  Thank you!

  Again, forget layout. The images in my post are the OS X print dialog, which is displayed for each program. In PSE he goes after you click Print in the PSE window.

  Page layout is not much used in mac.

• Acrobat 9 Mac Print dialog box freezes

  I was not able to print from Acrobat 9 Pro for Mac for many months. I open the print dialog box and change the settings, but as soon as I click the button print, Acrobat crashes and I have to force quit. (More precisely, the print dialog box can be moved around, but even if I switch to a different application, as the Finder, the print dialog box remains open - Print button stops flashing. Nothing is printed, and the dialog box cannot close until I force quit.)

  Worse still, it happens when I print a PDF from Safari, too! She was driving me crazy, and I've tried a ton of different troubleshooting techniques.

  Currently using 9.2.0 on Mac OS 10.5.8. Not sure when the problem started, but I did a number of Acrobat and OS updates since then, always hoping that it will fix it. No luck.

  I thought it was the free version of ExplorerX fonts Linotype that I use much, much too long. When I left, it seemed to work once... but now even without running it crashes. So maybe it was a fluke.

  Also, sometimes it works if I hit the print button very quickly after the opening of the dialog box. It's even more bizarre.

  Yes, I deleted the printer driver and reinstalled.

  Frustrated. (I usually just open the PDF in preview and printing, or place it in InDesign and print.) But sometimes, like today, when I print a contract with digital signatures, Acrobat only.)

  Sigh,

  David Blatner

  See if there is a new driver for your printer file. If so, install it and see what happens.

• Photosmart c4780, I - Mac - printing Photos

  When you print pictures, there are pale lines through printing. What is a cleaning problem? If so, how do I clean the heads?

  You can pull the carts and see if they are blocked on the bottom with the ink and other things.

  Check the ink levels.  When they become weak, some nozzles do not receive enough ink to the fire.

  Check your print quality settings.  It should be the best in the pilot for maximum coverage.

  Finally, try different carts

• Mac printing DUPLEX

  How to print DUPLEX pages on an iMac (OS X 10.7.4) using Microsoft Word (Office) on 114 (D411c) WANT?

  Hi GoloFeed,

  In, click file and print Word. In the print dialog box, then choose Control Panel available here, you choose the type of double-sided affair that can be binding edge Long or short-Edge-link.

• HP Envy 5534: Envy 5534 on MAC-printing error message Impossible to convert the scrip post file

  New printer configured prints letter but when I want to print a page with barcode on get error message: -.

  print the error message could not convert the scrip post file

  Can someone help please

  Hello

  Good news - after the first print as Image and wait for about 15 minutes as the printer thought of printing it - I had attempt additional ater restart and now it is printing the past I downloaded through Adobe Acrobat