My Macbook Pro, El Capitan will not recognize my ipod classic 30 GB, but my windows 7 laptop work done!

Similar Questions

• my macbook pro early 2011 will not recognize my samsung Galaxy s6

  I have a new samsung galaxy S6 and my macbook pro 2011 do not recognize it when I plug it into the usb port, I tried the samsung kies software, nothing happens I have

  also tried smart switch, it saves only the backup phone that's all, I looked on the internet without success, can anyone help, THANKS

  Your post says Imac. What do you have? You have the latest drivers for the Galaxy s6 downloaded on the computer?

• my macbook pro retina display will not download large files

  I had this problem happen to me twice before involving 1gig zipped files or files unzipped pretending to be finished in the download bar. It shows for example 309,5 309,5, the loading bar does not disappear. I try to click on it and it tells me "this son is still downloading. So I get in my downloads folder, click on the contents of opened, I look for the file and click on it like that, it gives me the possibility of reactivation of the zip folder, I do this, then it gives me an error message saying "files are not completed. (I give him hours and hours to 'finish loading' and then try again)

  Then... This has been recently. The first file I wanted to download was the Creative Design Premium Adobe (I waited half a day until the next day for this download click again on it) that is given to me directly in the downloads section of the adobe.com site. I need to reinstall the software due to an unknown error (YOSEMITE LIKELY) anyway... I start downloading, it ends - but not really. Something is happening. So I try it on Chrome, same problem. So I try it on a PC - made. No worries.

  So far I have not seen this question arise with someone else.

  The zip in question file is .7z and 335.9 MB file and the creative design premium is a 3.76 GB .dmg. I am running Safari on a

  MacBook Pro (retina, 15 inches, end of 2013)

  10.10.1 Yosemite

  MacBook Pro, Mac OS X (10.7.5)

  Start in Safe Mode, no doubt also resets of LANDAU and SMC , and then restart your computer normally.   See if the problem clears.

  If there is no anti-virus or anti-malware tools installed, any improvement in performance, of cleaning cache, optimizers any system or other such tools add-on, remove all those who, according to the instructions of the specific package.   Try the download again.

  Try downloading on a different network.   If it is a company or a network of offices, there may be filters and monitors in place, which can cause problems with the downloads.

  If all else fails, after the release of Etrecheck, and we will look to the configuration and what is installed.

• HP Envy 4500: Mac running El Capitan will not recognize the HP Envy 4500 printer more

  Last week I was able to print to my HP Envy 4500 to my MacBook Air and MacBook Pro, both running El Capitan.  However, when I went to print today, no computer cannot find my printer.

  I tried everything I found on these forums of discussion... the network reset, feeding all turned off, turning off iPv6, etc. anything.

  I have a USB cord used to print today and when I went in the connected USB printer utility, I could select Configure the wireless, but again, make the message: not accessible device.  It notes the wireless network, the settings were downloaded successfully on my device, however, your Mac could not locate the device on the network.   My Mac is both connected to the same wireless network.

  Help!

  Hello

  I restart your Mac and try the above steps again - if it does not prove successful, I then reboot your router and repeat the steps.

• Oracle Data Modeler 4.1.1.888 on macbook pro 15-inch will not let me choose the relationships on the model.

  Hello

  Can someone please give me an idea why the following happens?

  I have two machines:

  iMac 27-inch with El Capitan, java version 1.8.0_60

  MacBook Pro 15 inch with El Capitan, java version 1.8.0_60

  I use Oracle SQL Data Modeling 4.1.1.888 in both entities.

  In the iMac, I can change the relationships on the relational model, but I can't select them visually in the macbook only through File Explorer.

  I'd appreciate a comment or an idea about this problem.

  Thank you

  Hello world

  There seems to be a problem with the retina display and the only way to get around for me was to install an app that changed the screen resolution.

  View menu

  Hope that someday will solve this problem.

  PD.

  Once you change the resolution it looks a little bit fuzzy, but it's nice to be able to select the relationship.

• MacBook Pro Panic error - will not start

  I'm getting the following at the start. Have no idea what it is or what to do. Appreciate any advice.  Backup the latest TM is dec 10. But can't even get the stages of recovery to work.  Tests of material D on OK.

  

  If you're in Snow Leopard as your profile is displayed, follow these steps:

  Reinstall OS X without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  If the above does not work, then follow these steps:

  Clean Install of Snow Leopard

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

  size.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Logged, if supported), and then click the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. Once installation is complete your computer will restart in the Setup

  Assistant. After finishing Setup Wizard will complete the installation, after which

  you will use a new installation of Mac OS X.  You can now begin the process of updating

  at the opening of updated software and installing all recommend updates to bring your

  current installation.

  5. If you plan to sell or to give to your remote computer, then proceed as follows:

  Once you reformat your hard disk and reinstall OS X, the computer restarts with a

  Screen of welcome and you prompt to choose a country or region. If you want to leave

  the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

  Press command-Q to stop the Mac. When the new owner turns on the Mac,

  the Setup Wizard will guide them through the configuration process.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

• My HP C6150 all-in-One will not print. The printer icon appears, but it shows 0 pending work.

  I have just upgraded to Windows 7.  I installed the HP update software/driver for my HP C6150 all-in-One.  I can scan, but I cannot print.  I can print a test page from the HP solution Center under the Toolbox settings/printers; However, it is not a full test page.  I was also able to print an Extended Self Test diagnostic of the HP solution Center under the settings/printer Toolbox.  When I try to print from anywhere else the printer icon appears, but it shows 0 pending work.  Nothing happens, and the icon of the printer ends by goes.  I've uninstalled and reinstalled the software/driver with no luck.  I can't find a patch and update HP says there is no new update.  All diagnostic tests, I'm saying that everything works correctly.  Please help me.

  I was able to remove the printer drivers by using a printer driver removal utility.  The printer driver for Windows Vista and Windows 7 (I've upgraded to Windows 7) were apparently contradictory.  I reinstalled the software/driver and everything is good.  Thank you!

• Satellite Pro L10 - USB port will not recognize devices

  Hello

  I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

  Any solutions or suggestions?

  Post edited by: caddy

  I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

  I recommend you contact the service again as soon as possible.

• Any individual user there a Windows 10 having trouble getting iTunes to recognize an iPod Classic?

  It seems that iTunes does not recognize an iPod Classic as a device.  Are there specific drivers that must be installed for the iPod Classic to be recognized as a device with memory?

  Try putting iPod into disc - Apple Support Mode and see if it then appears.

  TT2

• I run a Mac Pro with El Capitan and iMovie 11 will not recognize my camcorder Sony FDR-AX35P 4 K

  I run a Mac Pro with El Capitan. iMovie 11 will not recognize my camcorder Sony FDR-AX45P 4 K. He keeps asking connect a camera.

  iMovie 11 (version 9) supported cameras include not all models Sony FDR.  iMovie 10 supports a number of FDR-AXxx models however does not list your a see particular: iMovie support cameras - Apple Support

  There are a number of problems of running iMovie 11 under El Capitan, particularly with still pictures appears.  (It does not supports video 4K).  I recommend try iMovie 10.1.2 which you should be able to get in for free or may already have in your applications folder.  Although your camera model in particular is still not listed, I would expect it would probably work, and failing that you should be able to read files directly from the SD card if you put in an SD card reader.

  Geoff.

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

  Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

  Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• Computer will not recognize Pro Duo or removable drives.

  Computer Vista will not read my Pro Duo chip, or it will show all removable drives except ROM USB where I have an optical mouse wirelesss connected (when I check my computer).  The import wizard shows only a USB where prior that he showed, f, g, h, etc.

  Thank you.

  Thank you for these two answers, unfortunately the first did not work, and the second deals with USB.  The computer will not recognize any location chip memory, they do not appear on the Import Wizard, or MY computer.  The only two drives that appear are drive C and drive J, which is where I have a wireless mouse hooked up.   Just before this problem I had... and still not... a bottom of screen message "one of the USB devices attached to this computer has malfunctioned... Click this message for more information."  The only connected usb is the mouse, and it works fine.  Solutions that deal with USB issues aren't really questions I have, except that in the future (if the problem remains) USB ports do not appear on my computer either.  Someone who has some said knowledgge I need to re - map the hard drive, or something?

  I really appreciate the time you people consume with it.  Any other ideas?

• I have usef to operate only on PC, but now I have this 2009 macbook Pro.  He had a record of 7200 RPM... but he died... I want to put a hybrid SSHD on it... will it run slower?

  I used to work only on PC, but now I have this 2009 macbook Pro.  He had a record of 7200 RPM... but he died... I want to put a hybrid SSHD on it... will it run slower?

  Several years ago I tested both a hybrid version Seagate 1 and later version 2 with my 13 "2009 MBP and the computer started more quickly with one of these drives with 7200 RPM drive. But that and save files were the only time where I saw an improvement of high speed. So no, not slower, but not really all that much faster. I ended up installing an SSD in the computer. Now that was an improvement.