MacBook Pro Snow Leopard OS HP C4280 not scanning

Similar Questions

• OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8

  OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8.  I tried to reload of apple and HP.  My drivers and software are up to date.  I tried to scan from preview, Capture and print browser.

  It worked finally.

  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Macbook Pro 10.6 Leopard I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• Says "sending data..." "and the printer does print (photosmart c440 & macbook pro snow leopard)

  Hi, my photosmart C440 printer suddenly stopped working print and custom. The message says "Sending data...". "forever but never prints. The printer is on but does not respond to what it says my computer. I have a macbook pro snow leopard OS. This has never happened before, I did not any changes to the system. When the problem appeared first of all, I reinstalled the driver and was able to print once and then it stopped working. Then I installed snow leopard and it stil does not work.

  Thank you!

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Hi, how can you get the latest OS for my not supported 13 '' Macbook Pro Snow Leopard?

  My MBP mid of 2009 was stationed for a while after some battery problems. After the age so I decided to solve the problem, but now I can't update to the latest OS El captain.

  Thank you

  You should be able to if you have the latest version of Snow Leopard. What version, specifically Mac OS X you have? i.e. 10.6.3.

• No display on monitor HPx2301 when connected to my MacBook Pro - Snow Leopard OSX

  Product: HP x 2301 Micro thin backlit LED display

  Host: Apple MacBook Pro i7 QuadCore (MacBookPro8, 2)

  Connector: Crush / MiniDisplayPort (miniDisplayPort to Apple to DVI)

  Operating system: OS x 10.6.8 (Snow Leopard).

  When I try to connect my new monitor with my 15' MacBook Pro I7, scans for a signal (DVI, HDMI, VGA) monitor, can't find one, the message "monitor going to sleep" and then stops.  The Mac detects the monitor but just for a short period.  He sometimes displays in the "preference screen Panal" (sometimes quite long for quite a long time to manipulate its parameters, but then it can detect is more invested)

  The Documentation provided was not at all no mention of Apple or OSX.  The copy of the ad does not mention a single restriction WindowsPC

  -How can I make this work with my Mac equipped crush (I did not in an HDMI cable yet because I want to confirm that the monitor __should__ be able to work with Apple equiipment.

  I discovered via permutation of another working pc/display combination cable, the DVI cable supplied with my new monitor was faulty (it was the first time I tried to use it-directly out of the box).  I will try to replace as a warranty repair.

• Using MacBook Pro Snow Leopard 10.6.8 Firefox 9.0.1. Use a magic carpet. Pinch (zoom in and out with two fingers on Magic Pad) does not work. Works on Chrome and Safari.

  How can I fix?

  A bug exists to implement the functionality - it is not yet done. Evolve https://bugzilla.mozilla.org/show_bug.cgi?id=688990

• 2007 MacBook Pro 3.1 internal superdrive does not

  I have a 2007 MacBook Pro 3.1 which is super slow.  I've recently updated the RAM 6 GB (the maximum allowed), swapped the HD internal SSD and also replaced the internal superdrive, which had ceased to function.  I did a clean install of El Capitan, after all has been toggled.  Everything seems to work fine except for the internal superdrive.  When I put a CD in, it started to turn a little but then he just fell silent, and I can't even eject the disc.  I tried the F12 key and the manual button on the top right of the keyboard.  I thought that perhaps I do not connect the cable correctly, but the fact he took the disc and began to turn, indicates the connection is good.  Whenever I restart the computer or wake from sleep, I hear the disc turns, but it stops after about a minute.  I don't see any picture of a CD mounted on the desktop.  Also, I don't see the icon of CD & DVD under system preferences.  I wonder if Miss me a driver or an extension for a CD/DVD drive.  I have a defective superdrive drive or is it a software problem?

  les2ki wrote:

  I wonder if Miss me a driver or an extension for a CD/DVD drive.  I have a defective superdrive drive or is it a software problem?

  Sounds like a bad drive or Superdrive cable

• I did this, copied my iTunes from iMac to Macbook Pro folder, and my playlists are not displayed on my Macbook. My iMac has been reformatted since... Is it possible to get my playlists?

  I did this, copied my iTunes folder of iMac to Macbook Pro according to the tutorial below, and my playlists are not displayed on my Macbook. My iMac has been reformatted since... It was my mistake, fitness before seeing that my playlists were not on my Macbook. Is it possible to get my playlists?

  https://support.Apple.com/en-us/HT204318

  Probably put you the folder in the normal position inside the music.  Launch iTunes while holding down the option/alt key and navigate to the iTunes Library.itl file in the folder that you moved.

• MacBook Pro is slow and DVD does not

  I have a strange situation. One of my mother's friends laid an old MacBook Pro to fix me. I don't have much experience of fixing Macs and have pretty much hit a brick wall.

  Everything on this thing is very slow right now, which is his main concern. Startup takes forever, but then everything you do once it starts up is also very slow. Even waiting for files to open, research, etc..

  She also said that a few days only before she brought to me, she had seen a DVD on it. The next day, she put another DVD in and it wouldn't work. She tried several DVDs with the same result.

  Its main use for this uses Skype to talk to a parent who lives abroad. And Skype, too, has slowed down a lot to her. She claims that this happened pretty quickly.

  Can someone tell me what is the problem and how to fix it for her? Thank you!

  Hello deacon303,

  I understand you are trying to solve the problems of someone to another mac and you need a little help who get up and running. I can point you in the right direction to continue your troubleshooting.

  Regarding the slowness, I have three articles for you to watch. The first goes on a few general suggestions on what to look for when a Mac is running slowly. Should you look to see if the hard drive is fun but also looking at activity monitor to see if an application takes a huge demand on the system. The second article is developing and using the activity monitor.  The third article will give a more comprehensive diagnosis on the verification of the startup disk. I know he's talking about what to do when a Mac does not completely start upward, but the steps are useful as well when the system seems slow.

  OS X El Capitan: If your Mac runs slowly
  https://support.Apple.com/kb/PH22145

  Apps can affect the performance of Mac, battery, temperature and fan activity
  https://support.Apple.com/en-us/HT203184

  Resolve startup issues and perform maintenance on disk with disk utility and fsck
  https://support.Apple.com/en-us/HT203176

  With respect to the repair of the SuperDrive, the next article will help you with that. It will make reference to the use of a version USB Apple offers, but the diagnosis is the same.

  Get help with the SuperDrive slot on your Mac computer loading
  https://support.Apple.com/en-us/HT201788

  Take care

• MacBook Pro comes with El Capitan will not work with Yosemite?

  You just bought a Macbook Pro (15 ', i7, 16 GB, 512 flash ") which comes with El Capitan and apparently I can't install Yosemite.

  I have the audio hardware and software which is more stable on yosemite by many accounts... After spending $ 3,500, I think I should have the ability to run the previous operating system (Yosemite)... very unhappy about it... as I use my rigging professionally and it's for me real time waster

  I have been informed by mac support to return my mac and get the old stock with a reseller... what a joke!

  Is there a real physical limitation or is it the IEF / SIP / MSC?

  Can anyone offer a solution?

  Thank you

  George

  Well, the line official company has always been that you can not install older software OS on a Mac than the version it came with.

  That said, I can say that I have indeed to install older versions of the operating system on some computers, (the Mac Pro towers). You will find very little written on the question of whether or not you will succeed. I make a backup of everything, the partition of the hard drive and try.

  It has been my experience you can usually return at least a version of the OS, but there is no guarantee.

• Downloaded Photoshop Element 9 on Macbook Pro.  application called "install" does not work.

  Hello, I recently downloaded Photoshop Element 9 on my Macbook Pro. I don't know why, but when I click on the application called "install ' ', the same application sends me this:"'Install' is damaged and can not be opened desirable eject you the disk image.
  Can you help me?

  Download the Setup program on the Adobe site (free download)

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Install, then enter the serial number, which you received when you purchased the software.

• Just migrated to a new MacBook Pro and Adobe Creative Cloud is not executed.

  After a migration to a new MacBook Pro, I get an alert at startup that Adobe Creative Cloud is damaged.

  I downloaded the installer of creative cloud as recommended, but it stops right after that I started to run it.

  The given alert is the same alert 'creative cloud is damaged"I receive at startup, with the link to download it Creative Cloud installer again.

  Uninstaller won't work, as it says I have CC Applications requiring a creative cloud.

  So, I'm in a bit of a loop. Given the no to join the Creative Cloud program, I can't disconnect.

  Any options? I am running 10.10.4

  .

  In fact, I found this answer in another thread.

  It worked for me. The key was ditching these two folders in public services:

  Good answer Brucgovn June 1, 2015-06:53

  Quit creative cloud application.

  1)

  Navigate to Applications > utilities.

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3)

  Click on the link below and download Adobe Application Manager and install the same.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once the installation is complete, a niche will disappear.

  Then open " Applications" folder and locate the launch of Adobe Application Manager icon and double-click it and update.

  Then try to install applications CC and check.

• Macbook pro to a jet m1212nf laser printer scan

  Hello

  I'm trying to scan from a LaserJet M1212nf MFP to a MacBook Pro running Mountain Lion.

  I installed the latest LaserJet driver from the HP website. Can I print using a USB connection. However I can not scan. If I open the HP Director, by clicking on the button Scan does nothing. If I open HP Scan I get a message: "no scanner available."

  I'm lost. Please can you help me?

  Thank you very much.

  I would recommend that download us the driver via Apple Software Update.

  Before we do that, we want to uninstall all incompatible software, you may have installed on your computer by running the uninstall HP program located under Applications > HP or Hewlett-Packard folder.

  After you do this, we want to download the drivers. The drivers for your product are available via Apple Software Update.

  First and foremost, temporarily disconnect the cable USB from the printer to the printer or the computer. Then look for any HP Update available by clicking the Apple icon, updated software.

  If no update could not be found, download the complete Apple HP printer drivers v.2.14:

  Printer HP v.2.14 for OS X drivers

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg

  Once you have completed the installation, you can plug your printer back in. After that the printer is reconnected, go into the settings to print under system preferences > print & scanning. To add the printer, click on the plus sign. You should see your printer listed here. Select it. If under the printer, see "use:  Make sure that tells the name of the printer and not AirPrint. Click on add down in the lower right.

  Good luck

  Kyle

• Snow leopard 10.6.2 and scan HP J6410

  I am on mac 10.6.2 and can not get HP J6410 scan wireless. I uninstalled all the software HP using ctrl, alt, cmd keys, then run the software update. I could print and scan printing using HP the and scan drivers ONLY when it is connected to the printer via a USB cable. After you have installed Office HP_Installer jet_Full_Group04_10.3.dmg I found Hello connection necessary to work wireless and added the printer still connected via USB. As soon as I disconnected the Usb cable and tried to print and scan wireless Hello just didn't work. I reset the system printer and tried to add the printer again but in "ADD PRINTER" window, there is nothing to add. I managed to connect to the wireless printer using the IP of the printer. Now, I can only print, but does not scan because there is no scan in the window "print & fax" button. Can someone advice how can I make the printer scanner wireless by using the IP Address of the printer or Hello connection works correctly?

  Thanks in advance.

  Hello

  It is all sorted and I can scan and print using Hello connection without any problems at all.

  I downloaded scan and drivers HP printer from the apple Web site, not on the HP support site. After the driver installation, I restarted the laptop AND the printer as well. And voila - everything works well. Thanks to everyone who tried to help me.

• MacBook pro 2012 retina boot normal but not edge

  I have the image and everything works fine.

  speakers

  MIC

  Webcam

  Wireless

  etc.

  Is it normal that I have not chime when starting?

  I bought a brand new mac pro and it fires when starting

  Thank you in advance.

  PD: sometimes I have to push some time to market.

  Reset NVRAM may solve it.

  Open Terminal.app and type

  sudo nvram d system volume