Main document folder and the other for images

Similar Questions

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• I want to install 2 completely separate Firefox instances, one for the family and the other for me.

  I tried to install each on different hard drives with different names, but no matter what all the bookmarks are connected between the two. I do not open both at the same time and even installed one without him in the start menu programs. nothing prevents them to act as a single instance. I don't want to use any kind of profile, just a shortcut on the desktop for an and a folder for each other. How to work around this problem. any help would be greatly appreciated. I have used flock as my default (Firefox), but it is no longer supported or updated, and I can't quite deal with chrome. I know it's Firefox function but so minimal and causes that I don't like it.

  Portable Firefox installed on the hard drive will provide a completely separate browser, so you don't have to do anything with the 'profiles' - which is run automatically by the program.
  
  http://PortableApps.com/apps/Internet/firefox_portable

  Google Chrome has no link with Firefox, Mozilla or Gecko based, it uses WebKit as its core and is more related than any other browser to Safari,

• Releases of question on 2 separate, one for Playbook and the other for BB10

  Hello

  At the moment we have an application that is currently enabled for BB10 and Playbook. However, we've recently re-written the application take over much better phone interface, and we would like to submit a version that is not specific to BB10 and have a separate for Playbook version.

  What I hope we can do is just uncheck the BB10 of the current version and let the Playbook checked, then submit a new version with only selected BB10. However, I wasn't sure if this overwrite the version of the Playbook and pull it store since the release "more recent" doesn't have the verified Playbook. Is it possible to have these 2 releases by-side, but be in the same "application"?

  Thank you
  Jake

  It works as you expect it. In fact you don't have to uncheck the BB10 phones on the old version.

• Configure the 2 network cards in a VM for MPLS LAN and the other for internet

  Dear all,

  I have a HP Server with 2 NIC cards. ESXI 4.0 is installed and 3 VM was created in it. Initially that a NIC card was connected to the path of the LAN MPLS switch and another card NETWORK was not connected to the internet switch port.

  Each VM only had a single NIC in it. So I assigned MPLS IP LAN to ESXI host and VM 3 and everything worked perfectly.

  Now, I wanted to have the internet connection for my 3 VM. So I plugged the 2nd NETWORK card with internet port and added the second NETWORK card to the ESXi using the Vsphere client - & gt; configuration - & gt; Networking option. Now the two nic cards are ponting to the network of the virtual computer.

  I've added 2 network card to all 3 VM and assigned to the internet IP addresses to all of these NICs. order of MPLS and internet work at the same time, I removed the card NIC MPLS entry door and manually routed through route add command. After this MPLS and internet worked well in 1 VM.

  I tried the same thing in 2nd and 3rd VM but it failed. whenever I have add 2nd network card in the virtual machine, the first of this virtual machine network adapter does not work.

  I'm after the right approach? Help, please...

  Kind regards

  Ashok doriane

  If I understand correctly your installation, you connected the physical NIC to two different IP networks.  Then you connected these cards in the same switch-v on the server.

  This essentially fills two different networks at the layer level 2 layer 3.

  You want rather than the two networks remain separated inside the host.

  • create a new v-switch on the host

  • move the internet NIC v-switch

  • Move the second NIC on each virtual machine to this switch

  • Make sure that access to internet VM NIC is one with a default gateway on a virtual machine OS

  • remove the default gateway of the NIC MPLS

  • creating persistent static routes to the NIC MPLS for any affected networks it beyond the same subnet as the NIC itself.  Addresses on the same subnet will be automatically accessible. Just roads for those outside this range.

  Steve Puluka

  JNCIA-ER enterprise routing

  Enterprise JNCIA-EX switching

  Senior network administrator

  Liberty Dialysis

  http://puluka.com/home

• I don't see pictures to the owner/documents without opening each file individually. I just see the same image of a mountain and the Lake for each file.

  I don't see pictures (jpeg images) to the owner/documents without opening each file individually.  I just see the same image of a mountain and the Lake for each file.  When I look in windows XP, the JPEGs under 'my computer' and select 'film' or the 'miniature' I can see the image.  Why can I not see the image using Vista?

  I don't see pictures (jpeg images) to the owner/documents without opening each file individually.  I just see the same image of a mountain and the Lake for each file.  When I look in windows XP, the JPEGs under 'my computer' and select 'film' or the 'miniature' I can see the image.  Why can I not see the image using Vista?

  Start button > in the search box, type options records > press the Enter key > click on view tab > uncheck " always show icons, never thumbnails " > click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• After upgrading from Vista created a new documents folder and now ignores the original

  Last week I updated my computer (which I believe has an update of the graphics card and some windows stuff) using Windows update and left while he was closing. I guess what he finished close, but as I was leaving for the weekend, I can't be 100% sure and this weekend my house loses power at least once.

  As for the problem, at windows startup today made first time setup that works normally when you connect to a user account for the first time. Applications of Sidebar by default loading, the default value of the user interface (that I don't use, so it was the first sign), and I found that on the opera opening, all my favorites and settings were gone.

  At the opening of my documents, I found that they were completely empty of content, including all hidden folders where all of my settings the user should be.

  Navigation around the computer, I find that this will C:\Users\USERNAME\ my documents are still intact, but are ignored, with all the shortcuts leading to my documents redirect me to the 'new' documents folder, which means that for all purposes useful all my user settings for all programs that store data in the documents have been reset.

  Maybe someone has an idea of what may have caused this?  Personally, it's one of the strangest bug I've ever seen in any version of windows, and I'm not sure how I should go to deal with it.

  Update:

  To check the path of the 'new' documents folder, it appears as C:\Users\TEMP

  This means at least all of my original documents folder has not been deleted, but I'm trying to support everything up to an external drive where vista decided to replace my old documents folder entirely.

  Hello

  You can perform a restore of the system on the computer to restore the previous settings again.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information follow the link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Once you've done the system restore perform the update of Windows once more and check what is happening.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Original title: high speed HDMI does not.

  I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Hi lisa,

  Try these steps and check the result.
  Step 1: Manage audio devices
  a. Click Start and then click Control Panel.
  b. click hardware and sound.
  c. under sound, click on manage audio devices.
  d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
  e. Select the device and click on set as default and then click OK.

  See http://support.Microsoft.com/kb/953500

  Step 2: Graphics output to monitor
  a. right click on the desktop, click chart options.
  b. output to monitor.

  Step 3: Adjust graphics hardware acceleration
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: Some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider at different levels and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why have I not 2 folders of paper? We are in c:\documents and settings and the other in c:\users

  I have 2 files in Windows 7 and they appear almost the same. One is c:\documents and settings\name\Mydocuments and the other is c:\users\name\MyDocuments. Can I move all the files the c:\users folder and then delete the folder c:\documents and settings?

  They are the same file.

  C:\Documents and Settings\ is an alias used to ensure the compatibility of older programs.

  This name is hidden if you are using the default options in the Folder Options > view. Unchecking "Hide protected operating system files" causes the file name to become visible.

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/bb968829 (v = vs. 85) .aspx

• I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image.

  Hello...

  I wonder if you can help me with a problem with my desktop OS X El Capitan 10.11.4 various...

  I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image. There is no disk in my hard drive... I try to download again, but still the same message...

  Help, please...

  Much thanks

  Lisa

  < re-titled by host >

  The actual message means you need to move the mounted image - the small icon that is displayed after you double-click the .dmg - and put it in the trash.

  Where do you see the message your computer?

• Trying to remove the folders from Windows one system empty, but in error "is a Windows system folder and is required for Windows work.» It cannot be deleted. »

  My parents bought a laptop from a friend, and recently my father ran an antivirus program that came with multiple files in a folder that has been created by this friend. When you try to delete the folder a box appears that says "it is a Windows system folder and is required for Windows work.» It cannot be deleted. "But all the folders inside are empty and of no use to us. Help?

  The standard answer to questions that begin with «I bought a used computer...» "is you can do a clean install of Windows, because you know not what could be hiding somewhere in the computer.  In this case, it seems as if he is infected with something.

  Legally, the seller was required to give you a way to do this reinstall, but in the vast majority of the private sales of used computers, this requirement is simply ignored.

  If it's a laptop to 'mark' (e.g., Dell, HP, IBM/Lenovo) there may be a hidden partition on the hard drive that can be used to restore the computer to its "fresh from the factory" State.  Of course, this will remove all applications that the previous owner had installed after he or she has bought new, but you should still seriously to consider making such a restore, if the mechanism is available.

  What is the name and the version of the antivirus application that has detected the wrong files?
  What are the names of the files?
  What is the name of the folder that cannot be deleted?
  Are you logged on as a user with the rights "computer administrator" when you try to delete it?

  Assuming that you can not or will not do a clean install of Windows, I suggest the following (do not run scans at the same time, each analysis may take some time, depending on the number of files on the computer):

  Connect as a user with the privileges "computer administrator" and do a full scan with each of the following:

  http://www.eset.com/us/online-scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx (requires download)
  http://www.PCtipp.ch/downloads/Sicherheit/35905/multi_av_scanning_tool.html (page is in German, but the downloaded scanner is in English)

  Also download, install, update and run a scan complete with each of the following:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• I installed 6 Lightroom on both computers. On one I have Lightroom 6.0 and the other Lightroom 6.3 (same license is valid for two machines). Comment do pay have Lightroom 6.3 on both.

  Hello

  I installed 6 Lightroom on both computers. On one I have Lightroom 6.0 and the other Lightroom 6.3 (same license is valid for two machines). Comment do pay have Lightroom 6.3 on both.

  Thank you

  Try to completely uninstall LR and then install 6.0 and then 6.3 update.

  Download here: https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html

• I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I be sure to consider both drives off the coast and reinstall on the

  I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I'm sure to remove both drives and reinstall on the larger hard drive?  I am a student and single MOM, and I can't afford the monthly subscription for the CC7.  If it does not somehow, I'll miss my classes.

  If the largest is the primary drive then it is safer than any other installation option, but all uninstall/reinstall can present problems.  If the software currently works very well, I would say that leave well enough alone if your future depends on software work.  Before you delete anything, remember to disable by opening an application and by choosing Help-> Deactivate.

• We were members of creative cloud and when the membership was to be renewed, we asked one month free. This leads to 2 accounts creative cloud on our page... a renewed and paid for and the other related to the temporary use.  How to get rid of the tempo

  We were members of creative cloud and when the membership was to be renewed, we asked one month free. This leads to 2 accounts creative cloud on our page... a renewed and paid for and the other related to the temporary use.  How get rid of the temporary use of a month?  They both have the same ID and both appear on the administration page.  Thank you.

  Please contact customer service to get this resolved.

• How can I create a gif image using photoshop. I mean photoshop shortcut keys and the steps for creating gif

  How can I create a gif for my blog [url removed by host] image using photoshop. I mean photoshop shortcut keys and the steps for creating gif

  CTRL + Alt + Shift + S Windows Mac CMD + Option + SHIFT + S change the image that you normally edit images.