Make improvements

Similar Questions

• A few weeks ago, I started having problems to make the links and buttons to work on various Web sites. I tried the steps help without success. What gives?

  When I go to some web sites, I can't some of their links or buttons to work. For example, I can't "vote" and see the results on the MSN home page or go to my account on the homepage of Ancestry.com. Some links work, but others do not. They do not work in Internet Explorer either. I tried all suggestions for plug-ins and extensions that gives Support of Mozilla. I have run Windows 8.1, have Java as well as JavaScript. I tried to understand what is happening. Any help would be appreciated!

  Ronmissy2008, it's immediate. I'm sorry to hear about you, not being able to access some links, or use the buttons to vote on issues or read articles. " First, I call your Internet service provider and have them check your router '. There is a possibility that it may need an update of the firmware, because you have upgraded to Windows 8.1. Firmware is integrated software that implements network protocols and security for this specific model of hardware device. More Wi-wired routers and are designed to perform a firmware upgrade process. The manufacturer will be able to make improvements to your router. When I arrived AT & T U-verse, my router updated its firmware that took a few minutes to perform. Click on the link for more information on firmware updates:

  (http://compnetworking.about.com/od/wifihomenetworking/qt/firmwareupgrade.htm)

  If your service provider is done with the update of the firmware on the router, then try to update your Windows 8.1 software.

  1.) Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on settings, tapping or clicking on PC, change settings and then typing or clicking on update and recovery.

  TAP 2.) or click on choose how to install the updates.

  3.) under important updates, choose the option you want.

  4.) under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click on apply.

  (http://windows.microsoft.com/en-us/windows-8/windows-update-faq)

  That's all I could think of at this moment. No doubt call your Internet service provider and let them know you have upgraded to Windows 8.1 and your router needs to be checked. In addition, ask them to update the firmware, if necessary. Then run Windows update. I'll do more research on this issue. Let me know what results you receive after completing the firmware update and windows update.

• new language support

  Hello

  I am from Luxembourg. A small country in Europe. For us here, it is difficult to find any electronic device that supports our Luxembourg native. So go instead of German or in french or in English. So I wanted to ask if there is any possibility to ask Apple if it is not possible to add this language because Apple supports both dialect for the iphone why not a language that is spoken by 400 k? It would also help the integration of new people who come to live in luxembourg when they know how to read a write a word in Luxembourg.

  I thank in advance to tide me over

  You do not discuss Apple here, this is a user to user support forum. If you want to see Apple to make improvements to the iPhone, or any Apple product, you must let them know about their feedback page. Go to http://www.apple.com/feedback and click on the box in this area. They read all the comments, but they do not provide individual responses.

• Reinstall an OS after hardware upgrades laptop

  I just bought a laptop HP 2000 series. Found that there not nearly at the speed I would like to and want to make improvements. Looking at bumping RAM 2 to 4 or 8 GB. In the research to upgrade CPU who perhaps understand a new motherboard as well. Don't think I'll be upgrading the HD right now, but always curious to know that if I do, how can I keep my current Windows 8? It came with the pc, so I have no backup discs and did I not a code. Will also change into effect of RAM and CPU something important that I should prepare in advance? Thank you.

  The RAM can be made easily. As you have on several versions of the HP 2000 processor is soldered to the motherboard. You'll find that the cost of a new mother/CPU card is more than you want to spend and less profitable to sell your laptop and buy something you like better.

  The key Code is integrated into the BIOS for Windows 8 systems. If you keep the same hard drive, it will work even with a new motherboard. The key Code incorporated in the new Board of Directors will be just activate as soon as you connect to the Internet.

  Upgrade memory will "work". You will not have to change anything.

  If you need a copy of the service manual or any other information post back.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Several questions using the fixed layout

  I'll try to explain all my troubles and excuse my English.

  Problems for a long time, iTunes Connect, Pages or iBooks author.

  I'm basically a writer of children's books using the EPUB fixed layout as a template. One of my books with (interactive) video I've corrected several times through many contacts with support until I discovered that the problem was that iBooks was unable to read the EPUB 3.0 presentation stops and freezes. Currently, this problem has been fixed.

  In fact, iBooks author nor Pages have fixed layout support. For example, the EPUB models presented in the Pages carry only vertical presentation - where are the horizontal templates for books on photography? iBooks author is made for classic books requiring chapters and sections that are unnecessary for children's books who just needs the blank pages where the images can be copied / pasted with text. It is, but not so simple.

  At the moment I have finished another book and used Epub Checker. Everything was OK, so I tried to download it using iTunes Connect.

  To my dismay iTunes Connect returned with several error messages missing both Epub Checker or inDesign.

  I am here to tell all this issues with Apple tools and how they do not work in practice.

  If you ask Apple to make improvements in its applications, for them to see that you must republish to

  http://www.Apple.com/feedback

• Expanding RAM on my 27 iMac

  My iMac 27 (mid-2010) has a memory as follows:

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 2 GB DDR3 1333 MHz

  I ordered 2 * 2 GB of the same type (Apple Corsair 8 GB 2x4gb DDR3 1333 MHZ C9 204PIN SODIMM) so I can expand the memory to 2 + 2 + 4 + 4 = 12 GB.

  It comes, will it be any show or boot issue? I ask because I have heard that all four memory locations should have the same type of memory and 'size', and I'm hesitant to try the upgrade if there are negative consequences.

  First, you will need to cancel your order of RAM. From what you wrote that you have ordered the same RAM that you have already installed! If you make a mistake and ordered 2x4gb DIMMs, then you can be correct. Adding that RAM can make improvements marginal speed however the best shot for the $ is to install an SSD to replace the HD HD are the neck of the bottle in computers and make the computer slow. With the help of Mavericks with 8 GB of RAM should be fine for most users.

  In addition, I would not have recommended the Corsair RAM, I would have recommended RAM Crucial (buy directly from them) or RAM macsales.com.

  Good luck.

• Boring to ALT + TAB behavior

  Hello

  I have a suggestion to change some features of the app, beacause even now when it is in the status bar when I ALT + TAB it shows the list of active applications. I often use this combination to switch between the two only widnows but ReadyCloud is very often in the way. I'd love to see it being fixed.

  

  Hi relains,

  Your idea to improve the quality and functionality of the application is very much appreciated, and we thank you for sharing your interest in it. I also found this behavior a little weird and I hope that we can make improvements on how the application correctly read on PC. If I were you, I'll post another thread to the exchange of ideas Board so that our development team can consider this request.

  Kind regards

  BrianL
  NETGEAR community team

• After repair startup repair to locked by default

  First of all thanks to all those who are willing to help me!

  HP Pavilion Elite m9400 desktop PC (M9400t)

  Who IS under warranty I should add...

  And had weeks of waiting to talk to someone about the current number of Ticket Service. (without any luck there...)

  Finally, I did a factory restore...

  After restoring to factory settings when I click on finish and the pc restarts, he went to

  «Startup Repair checks your system for problems...»
  
  If problems are found, Startup Repair will fix automatically. Your
  computer may restart several times during this process.
  
  No changes will happen to your personal files or information. This could
  take a few minutes.
  
  Attempt to repair...
  Repair the disk errors. It could take more than an hour to finish. »
  
  This works since 06:00 this morning... So, 12 1/2 hours. You can not hit Cancel or 'x '.
  It is said
  "Startup Repair".
  Repair the current operation cannot be cancelled.
  
  What should I do?
  I don't want to use the power button to turn off unless I know its ok?
  
  I'm waiting FRO a ticket service for weeks. I get the SAME answer over and over again... It's...
  
  Pasted from the email:

  Thank you again for contacting HP Total Care.
  After reviewing the question, I understand that you have not received response from the support of advanced technology.
  I appreciate that you have passed your question once again to us and gave me the opportunity to help you in this regard.
  Please accept my apologies for the difficulties that you are experiencing with your technical questions. I assure you that your situation is not indicative of the quality of service HP is able to provide. I appreciate sincerely taking the time to share your experience with us. Your comments are very important to us and will help to make improvements.
  
  (My name...), I regret to inform you that, due to a few techniques, cling to our advanced support group not able to you contact. Therefore, I'm climbing the case once again and you will certainly receive a response as soon as possible.
  
  If you have additional questions, feel free to let me know. I'll try to do my best to help you.
  
  We always try to ensure that the problems encountered by customers are always taken care with the utmost importance. Be a valued client of HP, we appreciate your prestigious association with us.
  
  For more information on keep your HP and Compaq products up and running, please visit our Web site
  to:
  http://www.HP.com/go/TotalCare
  
  Sincerely,
  
  ****
  HP Total Care
  

  I got this exact answer even FOUR DAYS in a row. GRRRRRRRRRRRRRRRRRRR
  
  In a previous e-mail, I was told...

  That's why I'm escalating this matter to our advanced support group (upper level)
  that will come back to you will be the next possible actions in the next two to
  three days.
   

  It was there for weeks.

  I can't get that degenerate anywhere. I tell myself that it's under warranty with HP support!

  So I turn on this Forum I saw a lot of things in the past from here that worked for me or the other pc that I was working at the time.

  So my fingers are crossed and just hoping that someone will know what to do.

  THANKS A MILLION IN ADVANCE!

  (and yes I know I'm shouting!)

  I'm waiting for a response before turning off or anything like that.

  
  
  
  
  
  
  

  
  
  

  
  

  Reminder, tell them that you talked with someone yesterday and had been promised a reminder. Tell them you need the fixed unit and you think it's a bad hard drive. Don't forget to stay nice and professional on the phone, it goes a long way.

• How are they events fall into three categories?

  Hi all

  My name is Sean Cummings. I am very new to Labview and this is my first post on the forum. I work for a car components plant trial. I run tests red blood cells and build parts. I recently ordered a new test stand at our location that came from another one of our facilities. The impact on axles test cell. Program Labview that we use to run the cell was created by one of our programmers little. He is very busy and works at another facility, so I took it on me to learn more about Labview and try on my own to make improvements to the software. I intend to attend some of the Labview Core classes if I find that I enjoy working with the software (until now I do).

  Currently, the program is mostly manually controlled. Paths and controls such as speed are controlled by the operator. There is a cycle of 4 seconds automated in which orders VI Labview clutches to initiates the data on the incidence and acquired 3 load cells and a speed sensor. Once this cycle over the operator must click on a button to open a call from reference Subvi. The Subvi analyzes the data of incidence and displays a chart as well as several points of calculated data. The operator must then open an excel spreadsheet and enter data manually. I created the worksheet with conditional formatting to show the operator if the impact event was in the acceptable range and to monitor impacts with target in the target range and under the target. Currently, each part runs 400 cycles of the impact and the operator must transfer 6 data points for each impact. In the next two weeks we will be test it parts will 1640 impact cycles. We need a better solution to make the process more efficient.

  My original thought was to have the Subvi automatically fill in the excel worksheet. After that several days of trials and errors, I could talk to a programmer from another school who explained to me that excel has not not a text based software and my methods would not work without the excel toolkit Labview.

  I then talked to the engineers within my company and they agreed with me that the excel worksheet is not necessary if Labview could follow the events of the impact internally. Then, I put to work trying to create indicators and counters to track the impact events. For that to work, I only need to look at a number. This number is the total output of the impact event torque. I created 3 Boolean flags on the main VI. One of the impacts on the target, all in the range and the other under the target. I also have 3 indicators corrosponding to view counts for each. I also need an indicator showing the events of the total impact and an indicator showing the events impact valid (the sum of the range or above target).  I use the target control. The range is + or - 5% of the target. I did my best to search and try to do it myself, but I can't do the things well. I use while loops count. I'm having problems with several charges for the same event. I also want to trigger the counters at the same time and has no control of the separate judgment for each.

  For this to be effective, I'll probably have to do these functions a Subvi. I would need to initiate during the call by reference 'analysis' Subvi and stop when he stops then maybe they can just be part of the Subvi.  I need indicators and control for target on the main INTERFACE. I also need a button to reset the counts, when the direction of impact and the target is changed.

  I apologize for any misuse of terminology. I also apoligize if my program is a mess. This is very new to me and I am trying to learn as much as possible. You thank all in advance for your help.

  -Sean-

  Here is a quick sketch that could classify an impact and keep the counts in a shift register. See if it makes sense for you. Maybe you can reuse some of the ideas in your real application.

  (I assume that the results are always positive)

  (You have not included your typedefs, so I had to interrupt them).

  

• Platinum Pro N paper

  Does anyone know where this new book can be purchased? The new 1.02 driver printer has this article as a choice.

  You can be assured the currently available Photo Paper Pro Platinum is version "N". Unless the seller you buy a course a few old stock.

  Often, Canon updates the printer profiles and puts any letter or number associated to a most recent profile. It is good that they maintain the older, because some of us are fixed in our ways and prefer the known execution.

  But if they did not make improvements society would stand still and soon to be run by the ubiquitous competition.

• What is Firmware and how do I install it?

  Just downloaded Firmware on my router (info by GIS)

  What does really do and how do I install it?

  Thanks in advance.

  Firmware is basically the operating system for the router.  It fixes the problems or make improvements.  Access the routers admin pages and look for the upgrade of the firmware section.  Rename the firmware on the computer in the code.bin file and perform the upgrade.

• String to the problem posed by the...

  I'm a string (from Date of toSting method) and this shot is not supported by the httpparser how can I convert to sting? and the string I get Date toSting method could be in different formats depending on whether the zone is available or not... How can I handel it.. ?

  Kind regards

  Kedar

  I use this date format because it is the default format you will get when you do date.toSting... and this was my requirement... that I get the date from the server in the from of a chain... I used the the substing and got a solution yet... but I would really appreciate if you could provide the solution so that I could make improvements in mine if necessary...

  Thanking you,

  Kaddy

• Unusual email

  Around noon today, I clicked on an e-mail, but nothing happened. So I clicked it again. Still nothing, so I pointed and clicked on delete. This caused a little lively Zebra to jump out of the e-mail envelope and galloping across my screen with a saying of legend, "don't kill me, don't kill me." It was pretty funny actually. Later, after 6:30, I was typing an e-mail to a friend saying that I went for a drive to Sandgate today and they must get a lot of rain, because the grass was green. As soon as I typed the word "grass" the little Zebra came galloping back across the screen, saying: "I eat grass, I eat grass.» At the time of writing these, it is 02:02 Monday morning and it is not returned. I expect him back. Of course, when I clicked on the email, I triggered something. I don't know if it's a virus or just a joke. The Zebra did not appear when I typed grass on this e-mail before, nor just then. I think that the Zebra is funny, but I thought I had better check with you guys, just in case he makes invisible damage. After the first time it appeared, I ran my virus scan, but nothing showed up. Regards Jimoa.

  Hi, thanks for your help. I did as you suggested and the Zebra showed himself still. However, I don't know what you mean with the word plugin? The only two things connected to my computer is the power cable and the printer, but they have been there for December 2012. I plugged my mobile phone to my computer to download photos, but that's all. I run the DVD in there to watch movies too. I printed your response to my question in case the Zebra comes again. Thanks a lot for your help, because it is appreciated. Regards Jimoa.

  Sorry not explained is not the thing in a nut shell... Plugin or addon that I've mentioned here is a software to outlook. not a physical device. plugins are used to make improvements in outlook... but yourthing could be a malicious thing...
  http://www.MSOutlook.info/question/88

  http://Office.Microsoft.com/en-001/Outlook-help/enable-or-disable-add-ins-in-Office-programs-HA010034127.aspx

  Loading outlook safe mode is a kind of safe mode. If something is wrong as a troubleshooting step perspective is started in safe mode. safe mode is turned on until u close it. If the next time u just click and open outlook, it will open up normal outlook and your problem may be visible once more... safemode is naked outlook without addons or plugins.

• BlackBerry Smartphones emergency call button

  I heard RIM say that having the emergency call on a locked screen is a "legal obligation".

  Can someone quote me this requirement legal excat in the Canada?

  I found some decisions.  However, I think that they don't block rim to make improvements in their interface to reduce the likelihood of accidental 9-1-1 calls.

  http://www.CRTC.GC.ca/eng/archive/2003/dt2003-53.htm

  http://www.CRTC.GC.ca/eng/archive/2003/dt2003-53-1.htm

  The current interface allows the call 9-1-1 with two or three clicks that is easy to do in a Pocket (ask any 9-1-1 officer).   RIM should consider changing the interface such that after clicking on "Make an emergency call" the user must always dial the '9' - '1' - '1' in the order.  This does not delay the user any more than ordinary 9-1-1 call from a phone that is locked or asleep.  This should however prevent a significant number of accidental 9-1-1-calls

• Uninstalling obsolete/useless files.

  Are writing all these files a necessary, or only the more common here?
  Microsoft Visual C++ 2005 ATL Update kb973923 - x 64 Microsoft Corporation 08/01/2011 0.25 MB 8.0.50727.4053 8.0.50727.4053
  Microsoft Visual C++ 2005 ATL Update kb973923 - x 86 8.0.50727.4053 Microsoft Corporation 08/01/2011 0.24 MB 8.0.50727.4053
  Microsoft Visual C++ 2005 Redistributable Microsoft Corporation 17/06/2011 0.29 MB 8.0.61001
  Microsoft Visual C++ 2005 Redistributable (x 64) Microsoft Corporation 15/01/2010 0.69 MB 8.0.61000
  Microsoft Visual C++ 2005 Redistributable (x 64) - Microsoft Corporation 16/04/2011 0.57 MB 8.0.51011 KB2467175
  Microsoft Visual C++ 2008 Redistributable x 64 - KB2467174 - 9.0.30729.5570 Microsoft Corporation 16/04/2011 0.77 MB 9.0.30729.5570
  Microsoft Visual C++ 2008 Redistributable - KB2467174 - x 86 Microsoft Corporation 16/04/2011 0.58 MB 9.0.30729.5570 9.0.30729.5570
  Microsoft Visual C++ 2008 Redistributable - x 64 9.0.30729.17 Microsoft Corporation 15/01/2010 0.77 MB 9.0.30729
  Microsoft Visual C++ 2008 Redistributable - x 64 9.0.30729.4148 Microsoft Corporation 15/01/2010 0.77 MB 9.0.30729.4148
  Microsoft Visual C++ 2008 Redistributable - x 64 Microsoft Corporation 17/06/2011 0.77 MB 9.0.30729.6161 9.0.30729.6161
  Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.17 Microsoft Corporation 15/01/2010 0.58 MB 9.0.30729
  Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.4148 Microsoft Corporation 15/01/2010 0.58 MB 9.0.30729.4148
  Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.6161 Microsoft Corporation 17/06/2011 0.59 MB 9.0.30729.6161

  Hello

  It is normal to see you with several versions of Microsoft Visual C++ redistributable installed.

  When a developer creates a program using Visual C++, the version they use may be the latest version or an older version. The version they use will be installed on the computer, when you install this program. A later version may not work with this program.

  Sometimes, these versions can be developed to fix newly discovered problems or vulnerabilities, or to make improvements.

  When Windows Update distributed an update from a previous version of C++ and it detects that the version is installed on your computer, it will apply this update.

  Uninstall one of these versions may cause some installed programs no longer works correctly.

  These updates are usually very small.

  Concerning