manual upgrade of 10 g

Similar Questions

• Error when MANUAL upgrade of Windows XP SP2 FOR wINDOWS XP SP3

  during the Windows XPSP2 MANUAL upgrade FOR wINDOWS XP SP3
  Following error is displayed, not able to verify upd ate.ini.ensure cryptogrphic services are running.i have checked & all the cryptographic services are running. Error continues. Unable to upgrade to SP3

  Start here:

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Manual upgrade with operating system and change in the architecture

  Hello
  
  I would like to describe a manual upgrade on Oracle [837570.1 ID] support, but I can't find information on the use of this method on the non-uniform type of OS, especially when the architecture is different. For example, is it possible to update as in metalink note, when the source database is Windows x 32 and target database is Linux x 64? Is there additional scripts or catupgrd this decision-making process?
  
  Best.

  If you have non-uniform platforms then you can install the desired version of Oracle on the new server and use import/export to transfer data. This works well enough for any combination of platform as long as versions of Oracle are not too far apart.

  The transportable tablespace option can work if the databases are two 10 g + with rman endian conversion.

  Here are two notes of Oracle support on this issue:

  Migration of Oracle database on platforms OS 733205.1 Instances

  Compatibility for Exp & Imp Btwn Diff Oracle worm matrix: 132904.1

  HTH - Mark D Powell.

• Is it safe to manually upgrade to Android 2.2?

  Hi, I downloaded Update.zip from http://www.multiupload.com/YOXKQ18YW0

  Is it safe to install this on my Defy (Germany version)?

  If it is the same that I linked to in a previous post, I would stay away, unless you're a mobile t e e USA client if it changes how your phone connects to your local mobile phone network, you might have a phone that does not work.

• How to upgrade manually 8.4 ios and not ios 9.3

  How to manually upgrade to ios instead of ios 9.3 8.4

  There is no way to upgrade to an intermediate version of iOS.

• Qosmio G30: Upgrade Vista session: new RAID not recognized

  Hello everyone

  I tried to upgrade vista manual upgrade option, but 2 problems have occurred:

  1. I could not remove these applications (are not not in Control Panel > Add/Remove)
  -> Bluetooth ACPI by Toshiba
  -> TOSHIBA TV TUNER
  -> Nvidia nView Desktop manager
  -> windows 5.1 msnger

  Then, I ignored them and proceeded, I faced a new problem, the new RAID drivers cannot be recognized in the partition screen.

  If I could solve these problems, I get vistaif you have any ideas it would be great.

  Hello Togan,

  Good to see you, engaged with the issue of Vista g30.
  This thread will be important for us, all owners G30 and the g20.
  We stay with you, watch and learn listening and if possible to help you.
  But as I don't have a model g30, let's wait for each of you, out there with the same purpose.
  Help togan and us by your advice and suggestions in relation to our Qosmios.

  First tip: as I told you, please start by a new installation of Windows Vista. Switching from XP to Vista, is not the best way to follow.

  See you soon,.
  Francisco

• CD will not eject - Pavilion 6400 - no manual eject hole

  Do not eject a cd of my Pavilion, 6400, which doesn't have a manual eject hole to stick a paper clip in. Clicking on eject on the computer of the road yields only noise and a failure message.  Suggestions please?

  As you do not give a complete model #, I had to guess your HP a6400f desktop. The shares identical wille for most desktop computers. The easiest way would be to turn off the computer and with a toothpick (less chance of scratching the front cover) actually tilt delinquency records cover plate. Once down, you will see the CD/DVD drive has only manual eject hole. Now use your for trombone.

  If your problems flipping to the bottom of the cover plate, consult this manual upgrade and Service.

  Just remove the side panel, then remove the front cover.

• Impossible to upgrade QWinsdowws 7 to 10

  whenever I try to upgrade to windows 10, I get this message, "disk controller; The current active partition is compressed. What that means and how to install the program.

  Try to be manually upgraded by using the tool of creation of media or ISO file.

  Also, click Start > computer > click with the right button on the system drive where Windows 7 is installed

  Click on properties

  On the general tab, uncheck the Compress drive to save disk space. Click apply then OK and then restart your computer, and then restart the installation.

  

  If the problem persists:

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Unable to get 10 Windows upgrade, I have Windows 7

  I click on the 'update now' thing, it turns, I continue with what I do - and nothing. Like, nothing. I restarted my computer... I still have 7. I looked in the downloads, there is nothing there that says "Click me to upgrade" or something like that. I'm not good at this stuff, but it seems that if she says 'click on this upgrade', it should do.

  Try the manual upgrade:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Cannot get windows 10 app upgrade to run

  Hello

  I have a portable extensible original and active running windows 7 Home premium and I cannot get windows 10 app to run.

  I followed KB https://support.microsoft.com/en-us/kb/3081048, got the identity of the package on the two dism/Online/Get-Packages | Findstr 3035583 2952664 and still nothing. After this I run the troubleshooter of GW10appdiagnostic and it comes always freezes in "eligibility verification."

  In addition, potential interest that I got a windows error update on the module "upgrade to Windows 10".

  

  I want to get help and upgrade as soon as POSSIBLE.

  Thank you.

  Hello Madzzz

  I suggest to you that do a manual upgrade using the Windows 10 installation media. That way skip you the step of waiting for the book to come through instantly upgrade to Windows 10. A guide step by step can be found here.

  Hope this suggestion helps you Madzzz

  Yuri

• Suggestion for the upgrade of the BIOS/MMIC C200-M1 path

  I have a UCS C200 - M1 v1.1 MMIC and BIOS of C200M1.1.0.4.0 server.  As I am not familiar with the UCS servers, I'm looking for a way to upgrade suggested the latest versions.  I know I have to do a manual upgrade at this point.  I do intermediate steps before entering the latest versions?  When can I use the utility to upgrade host?

  Thank you

  Karl

  Hello Karl,.

  Yes, it takes two or three steps to get the updated system level to the most recent version.

  Latest version is 1.4.3p for server C200 M1

  Download link

  http://www.Cisco.com/Cisco/software/release.html?mdfid=283860963&flowid=25802&softwareid=283850974&release=1.4%283p%29&relind=available&rellifecycle=&RelType=latest

  Upgrade procedure

  (1) move individually MMIC and BIOS to 1.3.2j

  http://www.Cisco.com/Cisco/software/release.html?mdfid=283860963&flowid=25802&softwareid=283850974&release=1.3%282j%29&relind=available&rellifecycle=&RelType=latest

  Download MMIC via TFTP server and activate it

  BIOS upgrade instructions

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/BIOS/b_Upgrading_BIOS_Firmware.html

  (2) upgrade to version 1.4.1c through the host upgrade utility

  Download link

  http://www.Cisco.com/Cisco/software/release.html?mdfid=283860963&flowid=25802&softwareid=283850974&release=1.4%281C%29&relind=available&rellifecycle=&RelType=latest

  3) go to 1.4.3p via HUU

  With the help of HUU

  Start the server off HUU image and select option 8 to update firmware for all components

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/lomug/1.4.x/install/b_huu_1_4_3.html

  HTH

  Padma

• Upgrade OS new Verizon blackBerry Smartphones lack BB after official Maps

  I've upgraded via DM 122 version no problem except one, namely I have more cards to BB and I don't know what other default applications may be missing.  Someone at - it a list of the default applications that come with a new storm?

  My question is how can I get the missing apps on my phone?

  Thank you

  Kraut, have you fact the manual (download and install manually) and the upgrade via the upgrade of the web?

  If you did the manual upgrade, open Desktop Manager > Application Loader > advanced and make sure that BlackBerry Maps is checked for load.

  If not, you will need to explain in detail that how you performed the upgrade.

• z3101 Acer touchscreen not working not not after upgrade

  I have clean install, wiped, by the way and unable to find the drivers. Then I visited the acer support site, but it seemed not to provide the touch driver.

  How to install drivers in compatibility mode?

  Right click on the driver installation program, and then click compatibility, run this program in compatibility mode for windows 7, vista, xp sp3, etc..

  try first compatibility mode for windows 7.

  new update from acer:

  http://Global-Download.Acer.com/FilesDownload/alu/LiveUpdater.exe

  drivers acer:

  http://www.Acer.com.Ph/AC/en/pH/content/drivers

  http://us.Acer.com/AC/en/us/content/drivers

  Unfortunately, aspire z3101 don't has no listed drivers for windows 8.

  help manual upgrade from acer windows 8:

  http://us.Acer.com/AC/en/us/content/manually-upgrade

• Nothing special about RAC DB upgrades?

  The GI version: 11.2.0.4

  DB version: 10.2.0.5 and 11.2.0.4

  Platform: Oracle Linux 6.4

  Number of nodes: 3

  We have a DB 10.2.0.5 running in an GI 11.2. We want to upgrade this DB in a DB 11.2.

  We already have 11.2.0.4 RDBMS installation in all 3 nodes. That's what I intend to do, to update our data base RAC 10.2 to 11.2 CARS DB.

  Step 1. Run the utlu112i.sqlin "pre-upgrade information tool" g's existing 10 DB.

  Solve all of the problems mentioned in the output

  Step 2. Stop the db 10g

  Step 3. Copy the new file inti.ora with the new 11g setting in the ORACLE_HOME/dbs 11.2. Delete the old settings of 10g

  the value CLUSTER_DATABASE = FALSE

  Step 4. Set ORACLE_HOME as a new ORACLE_HOME 11.2

  Step 5. set the ORACLE_SID for 10g DB and start the instance only in node 1 in UPGRADE mode

  $ export ORACLE_HOME = < location of Oracle 11.2 >

  $ export PATH = $ORACLE_HOME/bin: $PATH

  $ export ORACLE_BASE = < Oracle_Base defined during installation 11.2 >

  SQL > start Update pfile=11g_R2HOME/dbs/init.ora

  Step6.run 11gR2_home/rdbms/admin/catupgrd.sql

  Step 7. After running catupgrd.sql, start the instances of Node2 and Node3.

  The peculiarity only I need to do is to put CLUSTER_DATABASE = FALSE. Is there anything else I need to do?

  I want to do it manually because I have more control over the upgrade process.

  What do you hope to gain from having more control? What would be the advantage?

  Remember that you do not have * control more. You have the complete control and with it, all the responsibilities. In order to better not forget a step that would have made DBUA.

  Furthermore, I've never used DBUA in Standalone or DBs CARS before. Need to learn

  Have you read the last line in my first reply to this topic? I hope that you will test your upgrade before you do in production. You can read more of my thoughts on the tests:

  Importance of testing

  Testbeds

  Because you will test this point, why not take this as an opportunity to learn how the DBUA is simple to do? Sound far, much easier than the manual upgrade.

  Are the steps mentioned in my first post enough?

  I already mentioned some of the things you forgot in my first answer. Here they are again:

  You will need to manually fix the configuration of your network files. You have to manually manage the spfile and password file to new homes. And you don't have any stage to tell the new directory of Oracle clusterware.

  None of these steps has appeared in your list. Other steps that I can quote are to update the oratab file, manually start all RAC instances, check your services are up and running, recompile invalid objects. In addition, I saw no mention of backups. It is wise to backup before and after the upgrade. The backup before the upgrade is desirable in case the upgrade is very bad. You can return to the old version. The upgrade after upgrade is complete, as expected, a failure occurs, you will not have to redo the upgrade after restoring a pre-upgrade backup.

  That being said, learn to use the DBUA. Let the tools provided by Oracle as a DBA easier. In addition to the economy you time, the DBUA decreases the risk of human error in the upgrade process. Of course, I would go in my bosses office after I missed a db upgrade to see my boss to know that if I used the right tool for the job, the upgrade would not be smooth.

  See you soon,.
  Brian

• Upgrade from 11.2.0.3.0 to 11.2.0.4.0 release Oracle database

  Please suggest any url/metalink precious with clear steps.

  Well, I suggest you to consult the documents of the Oracle. Some of them include:

  https://docs.Oracle.com/CD/E11882_01/server.112/e23633/intro.htm#UPGRD52705

  Complete the checklist for the manual upgrade of the previous out of Place 11.2.0.N Version to the last 11.2.0.N group of patches (Doc ID 1276368.1)

  Additional tips: Oracle Certified Master - Articles: database upgrade 11.2.0.3 to 11.2.0.4 manual

  HTH

  -Jonathan Rolland