Massive storage of decompression problem

Similar Questions

• Connect as a massive storage

  I would like to know how can I connect my K1 to my laptop as storage massive o something like that if I can just drag photos, movies, applications, etc. and download the videos, photos and all I want without the tools of lenovo, which I think helps not so much. is more limiting than helping the manipulation of the K1.

  -J' have win XP BTW.

  So, what can I do to download the photos from the K1 to my laptop? I can also connect via WiFi as it says in the tutorial to connect via USB and WiFi.

  Win XP SP3 is the minimum required.

• Storage USB EA6700 problem of sharing file

  Hello

  I have problem reading files from usb storage, it's really slow, FYI write files to the usb storage works very well.

  Playback of USB storage:

  

  Writing to USB storage device:

  

  Checked:

  -usb works fine on PC

  -I have restored the previous firmware, the current version 1.1.40.153731, both get the same result

  Hi, NO_SCREENNAME. I suggest that you go to the page of Smart WiFi then go to the prioritization of media and change the downstream and upstream to "0". If it still does not respond, you may need to reformat your hard drive.

• Windows 7 mass storage peripheral communication problem

  Hello

  I work on the development of the on-board - hardware and software unit. USB connectable device and acts as a single storage device in bulk, connects to the usbstor.sys driver. I did all the developments using Windows XP and everything worked fine. When I tried to test on Windows 7 device has encountered some problems.

  Device connects to usbstor.sys, defined as working properly, but it takes up to 5 minutes to be displayed in browsers, and when it displays work slow down significantly. Does anyone have idea what is happening?

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• USB mass storage device driver problem

  I have 64 bit computer purchased new in July 2012, running Windows 7 with a Lexmark Interpret S405 printer.  It has been installed and works well for months and today, I asked a print a page on a Web site, and it would not print.  I received an error message indicating that the printer cannot communicate with the computer.  I tried to delete the request for printing, but the computer did not respond.  So I rebooted it.  After it restarted, I went to devices and printers to check the printer, and there the image representing that she needed troubleshooting.  Tried, but it did not fix the problem.  Then I received another message: USB Mass Storage Device has a driver problem.  Tried to find and install the updates for it, but the info said that the driver was already installed.  Can you help me solve this problem?  I'm not a computer scientist, just a frustrated computer user.  Thank you!

  I asked a question yesterday about an error message that says: USB Mass Storage Device has a driver problem.  This morning I tried unplugging the power to the printer and then plugged back in.... problem solved.  No need for additional assistance at this time.  Thanks anyway!

• Storage and Application problems

  My software storage are weird, my application used 52GB but my overview of storage shown 290GB. How is it?
  (IMAGE BELOW)

  

  It's probably the error of projectors. Is to address you need to re-index your OS X partition using the following-> Spotlight: how to re - index folders or volumes - Apple Support (you need to add the volume "Macintosh HD"). It may take some time before the end of Spotlight re-indexing of your OS X volume.

• Firmware problem + storage unrecognized device

  Feature: Nighthawk x 6 R8000

  Firmware: V1.0.2.46_1.0.97

  Platforms: Dell Inspiron (win 7), Acer Aspire(win 7), Custom PC (Win 10), Wii U, Kyocera Mobile, etc.

  1 firmware issue regarding 1.0.3.4 version

  -J' got 1.0.3.4 firmware installed for more than a month and constantly I have to hard reset the router because it would pass all (eventually) wireless internet cable to each unit at least once a week. I tested to see if it was the cable modem in the modem and instant internet. Internet connection would remain outside until I have pedaled power the router. I started V1.0.2.46_1.0.97 firmware and it was for 2 weeks with no problems. The modem is a motorola surfboard SB6141, internet provider is TWC.

  2. the router does not recognize my SanDisk Extreme 240 500 GB USB 3.0 Portable Solid State Drive for some reason any. I have a Maxtor Onetouch 4 much longer 160 GB mini it recognizes no problem that I use my file server, I wanted to update my SanDisk, but nothing I tried works. I tried port USB3.0 both the 2.0 no anvil.

  Any ideas on the problem of storage? The problem of Firmware is to support netgrear people so that they know that there is a problem with the firmware.

  Hi Redpaw,

  Make sure that both disks have the same format. If the SanDisk Extreme differs the Maxtor, you can try reformatting it even with the Maxtor.

• I'm unable to connect the Sony Walkman to my PC, receive error message WPD Enhanced peripheral of storage drive has a past problem cannot start [code 10].

  Original title: drive WPD Enhanced password storage has a problem cannot start [code 10]

  I tried to uninstall and install but nothing works I'm unable to connect my sony walkmann more

  It does not charge or sync with the device.

  apears there is a problem with the password for the improved wpd storage disk

  Hello
  1 did you change on your computer before this problem?
  2. What is the model of the Sony walkman?
  3. what happens when you load the device?
  4. What is the brand and model of the computer?
  WPD (Windows Mobile) devices allows computers to communicate with attached and peripheral storage media. WPD offer a flexible and robust way to computers communicate with readers of music, storage devices, mobile phones, cameras, and many other types of connected devices.
  Check if the device works fine on another computer.
  You can also follow the steps in the article mentioned below:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
  Post your answer for you help in this matter.

• iPhone 5 c full bug storage

  Hello

  I have recently used an iPhone 5 c (IOS 9.2.1) and come across an annoying problem. IPhone randomly time will tell me that my storage is full, when it clearly isn't. If I connect the iPhone to iTunes and sync I get my supposedly used storage and it also works if I sign out of iTunes and the Apple Store on my device, then reconnect. It's really frustrating because I have a lot of free storage, and the problem really restricted my use on the device with does not let me download apps etc. Although I said two things which remedy they only fix it temporarily, I enters the whole question around 2 - 5 times a day and do not want to have to keep connecting my iPhone on my MacBook to sync just to get the return of storage that I haven't used or especially if I can't access either at the point where the problem occurs through a repetitive series of tasks.

  I asked a friend with the iPhone even though they had never met this problem to which they responded: "all the time". I'd appreciate any help fixing this problem.

  Please Note: I am a technologically advanced Apple product user and know some things that can take place on a device. It is not a lack of attention to the storage to the left on the device, I don't know that I have free space so I would be grateful if the things (or similar) which follows is not commented:

  "Check your use of storage to see what takes your place.

  "Check your applications to see if they have the data cache which takes place.

  Thank you very much

  Jack.

  I have restored and updated my iPhone through my laptop and not on the airwaves and this seemed to solve the problem of someone else ask yourself

• Satellite M70: Could not find a mass storage driver

  Hey there,

  I installed a new satellite m70. But I can't seem to find a driver for mass storage. The problem is I don't know which driver it is but my machine keeps bugging me. If anyone happens to know what device need to install please, help me.

  Thanks in advance!

  zichzach

  Hello

  Why don t you use the recovery CD?
  It all the drivers, tools, and utilities are preinstalled and you only need to start the recovery procedure. It takes 20 minutes, and then the unit works very well.

  Good bye

• impression of Pro to Z5400 Designjet HP printing problem

  Last October, I bought a Postscript Designjet Z5400 printer. On both CD and software down loaded from the Web site called "HP printing Pro" produces an error on the screen of the printer "Incorrect, impossible to print file Format". This happens with. JPG. PDF and. TIF (any graphic file) files.

  The printer precisely will not respond to the controls of Photoshop CC either. Try to compose a set of 5 "x 7" photos in the upper part of a 36"wide roll of results of paper in the images printed on one side of the paper with massive losses." The problem seems to be that the printer will not allow a page size to create what is shorter than the width of the paper.

  I have been in touch with HP about this and offered a refund, even if I sent my own to the printer, not me Bank evidence. Answers like "It's a HP offer for you, not the finance co" suggests HP trying to me to commit larceny as a custodian... A criminal offence.

  I did not buy this printer for a refund, I bought it for a living with. Twice now, I tried to access the part "next day guarantee support" of the Pack in customer care, I paid an extra $1200 for and not received a response.

  I am able to print to this printer, but not using the software from either HP or Photoshop CC. Any help here as to who speak for the "next day" service, I bought or the highest level of management, I can access complaint with all the terrible service, I was making would be apreciated. I have a video broadcast quality of the mess that occurs when you try to use this printer, but I hesitated to post publicly until a person at HP has actually been and looked at the problem. It's either the printer or the HP software cause.

  Thank you

  Ryadia.

  Hello ryadia,

  I just sent you a private message.  If you are unsure how to check your messages from the forum, this post has instructions.

• Windows Explorer in Windows 7 restart when the storage device is connected

  Well actually, I have Windows 7 Professional running on my netbook and every time I connect a mass storage device (for example, my phone, external Hard Drive etc), Windows Explorer keeps restarting.

  I have MSE running, and there is no virus in it.

  Anyone can do more about this light? / Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are able to access the data in the device of storage without any problem?

  Follow the steps mentioned below.

   

  Step 1:

  I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the boot options.

  b. Select safe mode from the menu and press ENTER.

  For more information, see the article mentioned below.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  Perform a clean boot and see if the problem is resolved.

  Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Step 3:

  I suggest you to scan your system for viruses and malware using a care Microsoft and Microsoft security essentials. Check the links below.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security_essentials/

  If you think that it is a file that is infected, then I suggest you to quarantine or delete it from the system.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Storage vMotion with Syncrep on Equallogic San

  Hello

  We recently bought 2 San Equallogic (PS6510ES) and turned on synchronous replication between them.

  We use ESXi 5.5 and followed the best practices guide to disable TCP ack and 60 logintimeout value.

  Everything seems to work fine until we tried Storage vMotion/migration and cloning VMS on the San.

  When we did the migration of 2 volumes on the EQL SAN storage (the target volume has active syncrep), the target volume will be out-of-sync and then the storage vMotion will hang sometimes.

  The worst is when such a problem has occurred, all other volumes on the EQL constantly to respond also. All volumes will not respond until we rebooted the corresponding ESXi host (NOTE: simple shut down/power outside the host won't help.) The San EQL will only return to normal after a reboot of the ESXi host).

  If we pause / off the syncrep before Storage vMotion, the problem will not happen.

  Is this normal or not?

  In addition, whenever the problem occurred, the latency of writing the corresponding volume will be dry and we will receive alerts similar to the following:

  connection iSCSI target ' xx.xx.xx.xx:3260, iqn.2001 - 05.com.equallogic:xxxxx - test-volume ' initiator 'xx.xx.xx.xx:xxxxx, eqlinitiatorsyncrep' failed for the following reason:

  Initiator, disconnected from the target when connecting.

  Thanks in advance.

  Hi Joerg,

  What is a #SR? I opened a record of support to 24 June and still waiting for Dell to contact me.

  Ryan

• Error in persistent storage when the application update that happened.

  I've been struggling with the problem for a long time.

  MY application uses a persistent storage to store parameter information.

  But when I update my application from version 1 to version 2, number of items in my configuration page has been changed, which means the new version of the page layout will load and save some new stuff in a persistent storage that did not exist in the old persistent storage.

  Problem occurs when custorms update their request. How can we drag all the old stored information when users start to use the updated application?

  I see these three options:

  (a) the best thing to do is to delete the old application, which will get rid of the old persistent data.

  (b) create a 'version2' of you persisted object with a different name.  In your treatment of startup, you see if there is a version 1 object, and if so, migrate the setting of the object Version in 1 to your new object.

  (c) try to your compatible changes.  There are different ways to do this.  A way that is easy to understand is to persist a string, which is your options encode in XML format.  If you use an XML string, then you can add a new attribute to your new options - but the persistent object remains the same.

  I hope this helps.

• Problems with NVIDIA Ion for S12 display driver

  I downloaded the Nvidia drivers

  195.62_notebook_winvista_win7_32bit_international_whql

  and

  195.81_notebook_winvista_win7_32bit_international_beta

  I tried to install the 195.81 first, but it didn't work so I tried 195.62, but he also didn't work.

  The error message reads:

  "The NVIDIA installer didn't find all the drivers that are compatible with your current hardware.  The installation program will now stop. "

  I have a Lenovo Ideapad S12 ion.  What is the problem?  I managed to install the driver Nvidia 191 version, but these updates don't work.

  Help me...

  If you perform a search, you can find several threads on these forums about this.

  For some reason any, as you have seen, the current reference GPU nVidia drivers do not work.

  Now, thanks for the test of the 195.81 beta drivers - support nVidia actually suggested these as a solution to the issue.

  They also suggested to try to install the drivers (or set) of in Safe Mode. You can try this.

  However, as we said already, the S12 works ok with livery drivers.

  I recommend you to install the driver chipset nVidia reference (I found a significant improvement in performance with install them) - BUT, only install the EMS component - I found the storage component causes problems (up to and including a blue screen when you run a benchmark of HARD drive).

  Also, apparently, the desktop GPU of nVidia drivers works perfectly.