MATRIX PRINTING IN THE WINDOW PROBLEM

Similar Questions

• Problems installing of printer in the Windows XP compatibility box

  I am trying to use my printer Canon MX870 Windows XP compatibility mode. In the compatibility window is my computer has no printer, and apparently no USB ports don't either.

  When I try to print from a program that is running in compatibility mode, I get an error box that says: no printer driver is installed.

  I found an MS article that says I should choose the Windows XP desktop tools > parameters command and check the printer in the menu of the integration features. I tried and found that printer is already checked.

  I tried to install a separate printer driver compatibility window and had no luck there either. The "Add a printer" Wizard has informed me that there is no plug-and-play printer connected to the computer. When I tried to install the printer manually, I found that none of my USB ports have been listed as locations.

  My computer has eight USB ports, an RS-232 port and a parallel port. The Wizard indicates that it is three parallel ports, 4 serial ports and seven ports 'TS' appointed TS001, TS002, etc., of which the last is "inactive".

  I don't know how to make the link between these imaginary ports of Windows XP for real hardware in my computer. (If I did, I would still need to know which one to use. I know, but Windows is supposed to automatically allocate the names of devices on the USB ports that is appropriate, in view of these problems, I am not prepared to assume that it will be).

  How can I handle this? All this seems to be a mess.

  Hello

  
  To work around the problem, try the following steps if you have this driver on the XP Mode desktop file.

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file you have on the desktop XP mode, then click OK. Now, check if the printer is correctly installed.

  You can even provide the driver through a disk file if you do not have internet access to download the file via the XP mode.

  Alternatively, you can check the link for more information below:

  
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://blogs.technet.com/b/windows_vpc/archive/2009/09/26/networking-and-using-Windows-XP-mode.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Print to the shared printer on the Windows network problem.

  Hi all

  I apologies if someone read this the Forum of Acrobat Pro, but I was told I can get help on this forum. I have a problem that I'm beating my head up against. In my company, we have certain pdf documents that have been created using LiveCycle for our movement from the Green go 'paperless', but we hit a snag. We have some 'virtual' in use printers with our management software document who work as printers in normal network, but instead of capturing an image of the printed document and run OCR on our documents for the record-keeping. Each pdf document has its own virtual printer to recognize appropriate to use OCR models. To this end, we have many virutal sweepers for many of our documents. We love our LiveCycle documents but, when you try to use javascript to print on a particular network printer we found our complication. We do not map the printers using windows or to train our employees on their profile network printers adding as there is so much, and each document is assigned to a virtual OCR printer, we want the document has a built-in button that automatically prints which assigned virtual printer.

  If I open a document and edit it with Acrobat 9 Pro, I can simply place a button field and add this java code:

  var pp = this.getPrintParams ();

  pp.interactive = pp.constants.interactionLevel.Automatic;

  pp.printerName="\\\TOSHIBABILLING2\\pcl6 ';

  This.Print (pp);

  and the system prints on the printer network perfectly. However, if I use this same javascript in LiveCycle we get nothing. Further reading I found some details that I can't use this same script to print to the printer network using LiveCycle and am so at a loss.

  I tried to open the form in Acrobat 9 Pro to modify and just add the button using Acrobat Pro, but every time I change the document, it opens LiveCycle Designer.

  I don't know which forum to use as this problem has been found between the work with both programs. Can someone help me change the code for LiveCycle, or at least to find a way to open the document in Acrobat 9 Pro for just add the "print" key to the shape of LiveCycle. Any help would be greatly appreciated.

  ~ Max

  Thirsty just translated us your script that uses the Acroform model to use the xfa template, it should work... right?

  Your code in an xfa form would look like this:

  var oDoc = event.target;

  var pp = oDoc.getPrintParams ();

  pp.interactive = pp.constants.interactionLevel.Automatic;

  pp.printerName="\\\TOSHIBABILLING2\\pcl6 ';

  oDoc.print (pp);

  Try and let us know if it worked.

  Paul

• HP Officejet Pro 6830: 6830 windows 8 8.1 cannot print from the windows test page

  When it is connected to 'own' windows - it prints OK.

  When it is connected to the windows where are the normal software like office, autocad, adobe and so those installed, the printer does not print anything - test page from printer properties is the first problem that means...

  Only "free software priter" is able to print something (test pages and so one) also print doctor and installation wizzard prints what it can, but not possible 'to normal windows print"... :-(

  It is tested on:

  Software for laptop - Win 8 Pro - installed - no. PRINT

  Surface 3 Pro - Win 8.1 - software installed - no. PRINT

  Laptop - 8.1 Pro - clean shop - PRINTING POSSIBLE Win (after installation of the driver full download - in a test with autopilot installed it does not print)

  Virtual - Win 7 Ultimate - installed software - PRINTING POSSIBLE

  (installed software means office, autocad, adobe,...)

  It seems that some components of system installed with one software disables printing from windows.

  When looked at open before printing to the printer - it shows the print job (which is not printed) for 0.1 second and nothing is displayed - also when the printer is paused - it shows the work and it is deleted immediately - left must work until the printer not suspended...

  It is not a firewall issue (tested), it has been tested on: USB, WiFi, LAN. No way to print something from windows 8 and upwards.

  seems that it has something with the option run the program as administrator.

  tested on some programs - autocad, adobe, word excel,... - when run as administrator it prints OK.

  If you do not have the option in the context menu try to hold Shift before made a - right click and run as admin

  It's odd - some print settings are transferred with work, for example, winword impression (office) without admin - PDF Factory (virtual printer) - rights and then to the physical printer 6830 - he can't be printed to PDF Factory

  But if you start winword as an administrator - so you can print directly or through PDF Factory hassle

  ---------------------------------------------------------

  Personally, I see this as a big mistake by Microsoft - that something like this can happen - simple direct printing is not possible after you have connected the printer... :-(:-(:-(

• error message when you try to print from the windows photo gallery

  I can't print the Windows Photo Gallery photos: failure of the Document to print - load plain paper.  I reloaded paper, updated printer drivers and called Dell technical support, who said it was a software isue since I can print other documents as well as photos from Photoshop Elements. I get the same message when I try to print from painting and the image viewer. Looks like a problem of microsoft.
  My printer is Dell V515w and is 4 months old.
  Even if I can use Photoshop Elements, it is easier to use the Windows Photo Gallery.  Any ideas?
  Thank you
  Richn13

  Hello
  See this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/trouble-printing-from-Windows-Photo-Gallery/456cc8bf-9791-4619-82e2-de121deec9d3

  Let us know if it helps.

• Print to printer on the Windows 8 from Windows 7 PC notebook laptop

  I have a laptop that I just upgraded to win 8 from vista. The Color laserjet CP2025dn printer is connected to the machine win 8 via a usb cable. I want to print remotely from a windows machine 7 via the network. The machine win 7 can see the printer but when I try to connect (IE install), he complains that she wants something called point and print from microsoft. Microsoft doesn't seem to be able to help here and I can't find anything that makes sense with point and print (it seems to be a vista thing). I can print the computer laptop win 7 to the CP2025dn with direct usb connection, but it does not print when the printer is connected to computer laptop win 8. I spent the better part of two days on this and even called microsoft. It seems that there is no win 8 drivers for this printer.

  The Setup program has worked when victory ran 8 vista laptop, but now it does not work.

  I want to get a victory 8 tablet (not RT) and I wonder if I'm having the same problem.

  Any ideas?

  Thank you

  Jim

  I solved the problem.

  I have unplugged the printer and removed the printer from the computer of Windows 8 and remove all drivers. I then connected the printer and has found the right drivers for the computer of windows 8. I downloaded the universal PCL 6-64 bit driver. (HP.com/go/upd) After I downloaded the driver, I unzipped but before I unzipped I unchecked the box to install the driver. I right click on the printer (he installed the pCL 6 universal print) driver. I choose sharing and asked for additional drivers. (this option is grayed out when I first attempted to load the driver - HP technology specialist was very unhappy about it). I checked the box that says x 64. I was invited to go to a driver I chose the PCL 64 bit driver then the system has worked well.

  The problem seems to work between the Win 8 computer which is 32 bit and win 7 computer that is 64-bit.

• Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

  I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

  On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

  How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

  Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

• Windows Explorer has stopped working windows is collecting more information about the windows problem restarts what is the fix

  Is not allowing me to access my computer, don't constantly message restarts message windows.   Process is underway, need help.  I loged as a guest on the computer problem not if badly - however, it does not go to all the pages and begins to have a similar message to say windows cannot open this page, even if it often is in the page and it stops.

  a response would be email to me - thanks

  Hello

  1 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Important: before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Reference link:

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• HP Deskjet 3522. Cannot print from the windows photo gallery

  Hello

  I use windows vista home premum. I am connected via a wireless network. I can't my phone eprint and print photos from my email. I can also print from the internet. When I try to print a picture from my hard drive I get "unable to communicate with the printer" error message. The message to suggest that I update my IP address. The IP address is updated and accurate. Also, when I check my status of the printer, everything is OK and I can print the test very well. Help, please!

  Thank you!!

  It worked! I removed my old printers and it will show now! Thanks for the help!

• Re-login C4750 printer to the router problems

  I have a Linksys WRT54GS router and a printer Photosmart C4750.  I initially connected the printer to the wireless network without any problem, but the key to security on the router has been reset and now the printer will not connect.  The network test report indicates: "your wireless router requires a WEP security key.  The key to security configured on your HP printer does not exactly.  "Run the installation of the wireless network for re - enter your WEP wireless network security key.

  I tried to run the printer setup disk, but ran into a brick wall, when I was given 2 choices.  1. connect wireless ~ the router has not been detected.  2. connect w / USB cable ~ do not have.

  So I do not know what to do ~ is there a way I can re - enter the security key on the printer using my laptop which is connected wireless to the router?

  Thanks for any help!

  First of all, do not use WEP!  It is not secure and can also cause connection problems.  Use WPA or WPA2 with a password that you create - use 13 + characters, numbers and letters, upper and lower case.

  In the printer Panel, go to settings (Scan) > networks > reset network by default.

  Now start the software again for a network installation.

• Epson LX 300 II matrix printer cuts the last digits when printing an invoice

  When you print an invoice it cuts the last digit in the column cents... like $145,2 instead of $145,25.  How can I fix?

  Hello

  -Did you change on your computer before the show?
  -What operating system is installed on your computer?

  It seems that there is a problem with the settings of the printer. I suggest to make a few changes in the settings of the printer or contact Epson support.

  Also, make sure that you have the latest printer drivers for your printer.
  http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly (Assuming you are using Windows 7).

• Help, please! DOWNLOAD THE WINDOW PROBLEM

  When I start to download, without any window appears. If I open standard "downloads" in the start menu - a library opens. I can see my downloads here, but is not as usual. I just want to see the usual window! Help me please. Previously I never had problems with this app! / 20.0 (rus) Firefox / Windows 7 x 64

  Joergen salvation!
  Thank you very much! Your answer helped me! Now I am happy, everything is back! =)
  Best regards, Philip

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Canon i850 printer shared by Windows XP and Win7 does not print the entire page

  I've just updated my Vista laptop to Windows 7 as a place to upgrade. All migrated without problem except this shared printer. I downloaded the updated driver from MS download the catalog and the Win 7 Add the fron Canon pack I have installed in that order. The printer is connected to the desktop from Win XP to USB and is configured as a shared printer. Windows 7 sees the printer and also its status but print a test page prints only the windows of the flag in the upper left corner of the rest of the page is empty. Print directly to the printer under Win XP works perfectly. All ideas are welcome. Thank you.

  Well, I've had sorted it here's what I did:

  Removed all instances of canon i850 of devices and printers in Win 7.Rebooted, and then at the Run prompt run this command, "Printui/s/t2" without the quotes... Removed the i850 canon drivers and packages, then restarted again. Then I turned on the printer and plugged into a USB port on the computer to Win7... It installed the driver for me to Windows Update and a USB driver. I then added a printer shared in devices and printers selected local printer and set up the port as: \\xp computer name\share name\. I chose the same driver in the list that was created previously Setup USB canon i850... Restarted then installed the Canon Add / on module: aomwin110ea23us.exe. Restarted again... NOW, I CAN PRINT!

  Nice day.

• Print directly to the printer option in the Windows registry

  I need to find the location for the option "Print directly to the printer" in the Windows registry.  I am trying to create a GPO to enable this option when connecting and I can't find the place for that.  Is this possible to do?  If not, is there another way to activate this to start for all users?  We run Adobe Acrobat X on Windows 7 Enterprise 32-bit.

  Thank you

  This parameter is actually a printer in Windows, not in Acrobat.

  Take a look at this KB from Microsoft for general admission locations.  Each printer according to OEM may have different entries according to the document.

  http://support.Microsoft.com/kb/102966