max_threads 12 and run multiple calc both by maxl

Similar Questions

• If I run the calc script to aggregate a BSO cube, it blocks and release each block in a few seconds?

  Hello

  If I run the calc script to aggregate a BSO cube, it blocks and release each block in a few seconds? Or is it keep held locked blocks even after aggregation for this block is over?

  For example if I correct sparse dimensions Forecast, FY15, dec.  and my accounts dimension is only dense, after calc has my senior level members in the accounts, it it will issue after updating (i.e. in fractions of seconds) or is agg keep it held in a lock?

  I ask because I want to run scripts tot., but there is the update of our cube users.  I never had a problem to start agg, while users are updating.  But maybe I am lucky.  If a user updates a closed block, they will receive an error message that I think.  They may try to update again after a few seconds, I hope.

  Thank you.

  Locking behavior for BSO Essbase is described in the database administrator's Guide: http://docs.oracle.com/cd/E57185_01/epm.1112/essbase_db/dstinteg.html

  It is certainly theoretically possible that a user can obtain a lock because of a calc, although I can't say I saw him be a problem in real-world applications (perhaps because access uncommitted is the default).

• running multiple instances of VBAI does not work

  Hello everyone,

  We are 4 common examples of VBAI at the same time. Recently, he had to copy it (because production is doubly).

  With our first system, we have no problems when you try to run multiple instances of VBAI. This time, however, it does not.

  Our system:

  • 4 cams: Allied Manta 201
  
  
  • camera is triggered (rising edge) separately, but almost simultaneously.
  
  
  • Four port NIC (with the right driver :-))
  
  
  • 4 ports and our on-noard port are bridged.
  
  
  • computer: intel I5 (4 cores)
  
  
  • License to run Vision Builder 2012.
  
  
  • Programmed with Vision Builder HAVE 2012.
  
  
  • Interface programmed in c# (receives images of the relevant info 4 programs and displays on the screen).

  Action taken:

  • Test with our program that opens 4 instances of VBAI. Result: 1 single instance opens.
  
  
  • Removed our bridge a connected our cams on a switch. Result: 1 single instance opens.
  
  
  • Open VBAI 4 VBAI-programs directly (but separately). Result: Each program opens and is fully working.
  
  
  • Open 2 programs at the same time (with VBAI). Result: Fist opens and is equipped with the work. At the opening of the second program, that we get error messages saying that it is not possible to connect with our camera.
  
  
  • The test above was created with:
  
  
  1. The cam connected to our network card 4 ports.
  
  
  2. The cam connected through a switch.
  
  
  • I have also written 4 simple programs (just enter a period followed by image)
  
  
  • With these programs, I tried the above test (VBAI 2 hours and run both programs at the same time). Same problem: 1programs starts, the error messages when opening a second program.

  I have the impression that it's a network problem, but what bothers me is that, when the bridge, I don't see a difference with our another computer that works on our original assemblyline. When you work on a referral that our parameters are the same as on a computer that does not have a network card 4 ports. The computer (and liked)) allows us to run multiple instances.

  Any thoughts?

  Any help would be greatly appreciated. I'm sure I'm missing something obvious here, but I don't really see.

  If you need more information about something, let me know.

  With sincere friendships.
  Tom Declercq

  
  

• Update loop under Vi of hand / run multiple Instances

  Hey everybody,

  If I want to keep my code as modular as possible so that I can see any sub or VI.

  One of the SUB vi is permanently offices incase another output is detected. I don't want to make this mark on the main level because I don't want a huge loop in my main.vi and you won't worry about sending shift register valuse to my Subvi for him to function.

  Essentially, I have designed this subroutine Vi and am now trying to constantly be driven from a main.vi

  This hand is simply.

  Cluster of entry--> Sub VI

  Void VI retains a loop waiting for a change request action. Unfortuantely when I change the vale in main.vi the avlues in Subvi don't update. I guess that makes sense, in C, for example when you call Returns you need to wait until the end of the function call to update. Yet, as Labview is so strongly focused on taking SUB vi to do almost everything for you, I can't imagine labview is not able to update these values. I looked around and the answer seems to be global variables. I really don't want to use the because my application will become very big, but I'll use them if I need to.

  Unforunately, when I tried to use my global variable thing, it didn't work.

  1. global Var = Cluster

  2. it's in the Subvi both the main VI.

  3. when I run my code the global variable is not up-to-date on both front sides when I change one of them. I'm doing something wrong?

  A few comments.

  • You have not included the global variable
  • If you want to run multiple instances of the Subvi in parallel, it must be reentrant.
  • As the Subvi is interactive, it must be configured to display the front panel when it is called, otherwise there is no way to stop it ever.
  • All your time loops needed little expects. They have no need to turn as fast as the CPU allows, all other processes of hunger.
  • "Go to under control" is extremely complex and crawling with weird stuff like an ant farm.
  • • The shift register must be initialized to avoid surprises (but you probably don't have it all)
    • Your loop runs one time too many.
    • Avoid the stress points, such as the structure of the case.
    • You can replace this whole thing with for example a table of threshold, no need to loop. (see image below).

  

  Good luck!

• Parent of the values of the Member, not of compensation after removal of the child and running aggregations

  Dear users of Hyperion, we worked on a realignment of store, we are cut and paste shops from one region to the other. We moved all stores except X 1 parent 2 & X 2, so the total of these parents should now be zero. We have updated the cube and'd calc, however Parents always have $ values in them.  Can you please advise how we can fix this because it's doubly adding those numbers in our total entity level. Is there a problem with the type of the members of X 1 and X 2. If it's store or never share then, will not be clearly amounts even after aggregation? It can happen while in the case of stored or never share type of the members of the total still is there on the X 1 and X 2 parents? I'm trying to understand why the values do not go to zero once we got all out of these original parents and stores even after the execution of the aggregation? Please specify. Thank you. Regards, Praveen.

  Hey Praveen

  Glenn has practically put the nail on the head; We stumbled upon this specific scenario a few months back.

  Initially you had children less of X 1 and X 2 so both of these members hold securities aggregated and both of these members have a stored property.  You have moved the children in outline, the X 1 and X 2 have the same aggregated values stored against them.  You run an agg... because there is no child under X 1 and X 2, there is nothing grouped upward to clear the values of these two members and grouped together so the same values are always stored against them.

  Glenn's suggestion for the fix is the same approach that we had to take to resolve it.

  JB

• Need help to find and replace multiple query

  Hello
  
  Is it possible to run multiple searches and replace queries both in Dreamweaver 8?
  
  Currently I have:
  
  Find: current Document
  Search: Source Code
  Find: ToR
  Title: < acronym 'Mandate' = > ToR < / acronym >
  Options: Match case and find whole words
  
  I have search and replace about 12 acronyms on each page, and I was wondering if I can create a search and replace the query that includes all my acronyms or do I have to manually run these 12 single queries every time?
  
  Thanks for the help!

  I'm afraid that is both

  --
  Paul Whitham
  Certified Professional Dreamweaver MX2004
  Adobe Community Expert - Dreamweaver

  Valleybiz Web design
  www.valleybiz.NET

  "Acadieman" wrote in message
  News:eci6a5$JDL$1@forums. Macromedia.com...
  > Hi,.
  >
  > Is it possible to run multiple searches and replace queries both in
  > Dreamweaver 8?
  >
  > Currently I have:
  >
  > Search in: current Document
  > Search for: Source Code
  > Find: ToR
  > Replace: ToR
  > Options: match case and find whole words
  >
  > I find and replace about 12 acronyms on each page and I was
  > I was wondering if I can create a search and replace the query that would include
  > all my
  > acronyms or I have to manually run these 12 single queries every time?
  >
  > Thanks for the help!
  >

• Multiple profiles can be addressed by running multiple installations of Thunderbird; rather than put several profiles on a plant?

  Please don't laugh, but I'm running three quite separate mail programs Eudora on a PC; each one with a different email address. I have three icons, and emails are completely separate. I'm just trying to determine if I can do the same with Thunderbird. I know that you can configure multiple messages in a single installation, and then switch back within this facility. But I'm trying to see if I can keep doing what I'm doing now. I know that I have to open a new Eudora program for each email address, but I'm OK with that. Any thoughts?

  Eudora becomes old and unstable, so I would go if I can.

  Thank you very much.

  Although I don't really no why you must run multiple instances of tuberculosis, especially since the TB program folder and the profiles folder are separated, to do so are described here:

  http://KB.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time

• Cannot run multiple firefox version 4 windows

  The problem after the upgrade to FF4 began to occur. In ver 3 I used the Profile Manager and was able to run 2 windows firefox at the same time without any problems on Windows 7.

  Now when I try to do this with version 4, a firefox window-error "firefox no longer works."

  I thought that this was due to an incompatibility add on or something, so I made a withdrawal of the full program, rebooted, cleaned the registry and deleted all the files that firefox on my system. The problem persists.

  You can run multiple version at the same time if the next version is started with the - no-remote switch added to the command line in the shortcut to the desktop.

  'C:\Program Files\Mozilla Firefox XX\firefox.exe' - no-remote Pei

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are therefore currently operating on 9.2.1. It just says: update could not be completed, and that was in the 11-15. I pay for extra storage if this isn't the issue...

  I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are running 9.2.1. I can't get either do an iCloud backup, he repeats to me just last backup could not be completed. The last successful backup has been in November 2015. I pay for most large storage storage account is not the problem but, the fact I pay for cela and cannot use it is very frustrating = / I really need to get my backup iPhone I have a few important pictures there. I have read other posts, but nothing useful there. Is this a problem in one of the updates at this time or some other interferente app? Or? Thank you...

  Welcome to the Apple community.

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > Storage manage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > backup), reboot the device and then turn on BackUp on new.

  If this help not disable backup again, remove your existing back to the top of settings > iCloud > storage > Storage manage > backup > this device (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > general > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do with settings > iCloud > storage > storage management > backup > appliance > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• Best way to control and enforcement multiples (up to 20) deals independently in LV

  Hi all

  I am building an application in BT to control independently and methods of running multiple (up to 20), i.e., it should be able to start and stop one of the processes at a given time. What would be the best way to code for this? On the top of my head would be to use a single notification utility for controlling each process, but I think that maintenance of code can be a handful with this number of reporters being defined. Are there more effective ways to do this?

  Appreciate any help and idea on it. Thanks a bunch!

  This nugget is launching several threads and slap them with Occurences. Convert this example on notifiers and you good to go shouldb.

  I have developed applications with more than 100 background threads using variations on the theme there.

  Ben

• cRIO run multiple Applications?

  Is it possible to run multiple applications on a target cRIO?  Would they all need to be part of the same project in LabVIEW?  Can I set more than one as a starting VI or need to create a VI that would start up individule applications?  They are the basics of Ethernet and not to use or share any what I/O.  I looked around, but didn't see much information on this subject.  Thank you!

  Good afternoon Matt,.

  It is possible to run several applications on a target of cRIO as long as they are in the same project and do not exceed the capacity of the target memory. You can only mark a VI the sixth start-up, but, as you said, you have this VI call your other applications. You can find useful the following documentation:

  Programmatically launch an executable file or VI on a real-time controller

  http://digital.NI.com/public.nsf/allkb/A7DBA869C000B5AE862570B2007C4170

  Using VI server to run LabVIEW VI real time stored on a hard drive of the RT series

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4364

  Getting started with the Module time real LabVIEW

  http://digital.NI.com/manuals.nsf/WebSearch/12F0FF18FB1BB533862575AD00696100

  I hope this helps!

  -Ryan S.

• Deploy and run the part of the project in real time RT

  I am developing a project, LabVIEW-RT, with a User Interface on the PC and evanescent code that runs on a PXI system.  I read a few posts discussing the possibility (or lack thereof) to start the RT of the project by program part.  Here's what I mean: my project has a first level VI on the host PC, call 'Host UI.vi', and a first level VI on the RT target, call it "target RT.vi".  There is the usual assortment of other features of the RT, such as flow, LAN and network Variables shared, etc.

  During development, I open the project, find the code RT target, select the target RT.vi and click Run.  I can do the same with the host UI.vi.  My code works (or not, depending on whether I have introduced new bugs).

  What I would like do is to run the host user interface and run the code to mimic an RT target selection in my project and perform a right-click.  I partly managed, but a small step escapes me.

  Can I programmatically deploy my RT code and make it pop a window front so I can click on the Start button.  I even managed to start running programmatically using VI server.  However, when I start it programmatically (rather than clicking Run), my shared network Variables are not available.

  I studied it a bit by using Distributed System Manager.  With her, I can 'see' my shared Variables of network on the target of the RT, but its status is offline.  I put online by clicking on the button 'Start process' in DSM, however, when I then try programmatically start my vi target RT using VI Server, Shared Ntwork variables goes Offline (accordint DSM).

  Question - is there a way to do a program equivalent to locate my network shared Variable in DSM and clicking on start processes?

  [I had a great idea while writing this post.]  I have noticed that if I deployed my VI and also expanded my network shared Variable, DSM has shown to be online, but the target RT start VI VI Server, the NSV went offline.  What happens if I have deployed it after from the remote?  Good idea, too bad that it didn't work...].

  All the best ideas?

  BS

  Well, I just did!  I wrote a demo project RT with the following characteristics: RT side consists of a single VI that affect False in a Boolean Variable (NSV) shared network, goes in a while loop until there is true, goes into an another wait loop to make it False, then ends.  The NSV is hosted in a library on the remote target.

  The host does the following:

  1. Determine the IP address of the target of the project.
  2. The first name of the VI RT to run, to return a reference to it.
  3. Use the reference to deploy the RT VI on the remote target.
  4. Use the IP address and the name of the RT VI for a VI Server reference.
  5. Use the reference to start the code that runs on the target of RT.
  6. Go in a loop looking at the NSV and wait for the status of the error not be 8BBB0006 (uninitialized NSV).
  7. With the value returned by the NSV (must be set to False, defined by the code of RT), deny it, set it and wait that it will change.
  8. Do this one more time to return the NSV to its original value (as defined by the code of RT).

  Before running the code, right-click on the target of RT in the project and turn on "disable AutoDeploy Variables.  J of Zach, an Applications Engineer of NOR, suggested that this step, which can be the key step in the resolution of this dilemma.

  To test this, I restarted my PC and the aim of RT.  Once both had restarted, I opened the project on the PC, and without interaction with the section the project somehow RT (including not not clicking 'Connect'), I ran the host code.  He started the remote code and was told that the round trip time for set and reset my NSV was about 29 msec.

  I intend to make a full text of this and submit the entire project, with documentation and all the screws under utility, I used, to community page OR.  I'll try to get this done this weekend...

  Bob Schor

• Open/run multiple windows of the same VI

  Hello!

  In my current project, I would like to create a user open multiple windows of the same VI.  I made a re-entry VI:

  

  This is, actually, a very simple VI which has just a digital control, a loop and a stop button.  Then I have a VI that calls the VI re-entrant.  I would like it so that whenever the user presses the button "Call home VI", a new window of this VI is created and run.

  

  The first time the button is pressed, the reentrant VI opens and works very well. The title of the VI in the title bar is "Re - Entrant.vi:1 (clone)" (as expected).  When I try to launch another instance I get this error:

  

  I'm in LabVIEW 2009.

  Thanks for your time.

  I think you can do this with a static reference of VI, because it always points to the same instance of the VI (returning).

  You must open a new instance using Reference of VI open with option 0 x 08 (prepare environment run).

  Hope this helps,

  Daniel

• RUNNING AND RUNNING AND RUNNING UPDATE

  My desktop pc and my laptop both running on Vista. A few months ago, I had a problem with my laptop - when you the turned on, he told me it was updated 3 3-0% complete configuration and it turns off after a few minutes and restart and start all over again. I had to do a system restore and restore the system to an earlier date and then it worked fine. NOW, I have the same problem with my PC. Unfortunately, when I run the system restore, it just runs and runs and - hours. Does not. Tech support tells me that I have to put my system returns with a system recovery - total headache I have to reinstall all my software again. How can I prevent future problems? How will I know when an update is really needed for my sysytem? Of course, the latter was just incoherent.

  Windows Update installs only the Updater you machine that supposedly require.

  Before making a full recovery, try this:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  It will be useful.

  See you soon.

  Mick Murphy - Microsoft partner

• Missing startup programs, printers uninstalled and run used print spooler

  Hi guys,.

  The title really says it all.   I am running XP.
  I tried to use my scanner but it will not work properly.
  I tried to use my printer laser hp 8000 and Canon S800 deskjet.   They are more installed and when I try to install I get an error that says that the print spooler is not running.
  All programs are missing in commissioning.   If I click on programs, then I can find them.
  Any ideas?   I ran, but I'm not all that good in the first place.
  TIA
  Greg

  "Missing programs" indicate likely malware infestation.  What do you use for an antivirus application and is his current subscription?  Have you let the subscription expires?

  Start with the download, install, update and run an analysis complete with each of these tools free amtimalware.  Do not run the scans at the same time.  Each is likely to take some time, so have something else to do.

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  Now for the symptoms.

  Hidden entries in the start menu > all programs

  Beginning > menu all programs is a combination of two folders (directories) on your hard drive:

  C:\Documents and Settings\All Users Menu
  C:\Documents and Settings\\Start Menu

  If the subdirectories in one or both of the above is given to the "hidden" attribute, you will not see the corresponding entry when you click Start > all programs.  To check and fix this, right-click on the Start button and select "Open" or "Open All Users" (you should do as well until you're through).  In the window of Windows Explorer that opens, click Tools > Folder Options > view.  Click on the button "Show the hidden files and folders" and uncheck "Hide protected operating system files (recommended)."  OK your way out.

  Double-click the programs folder.  Any folder that is hidden will appear "disappear".  Right click on each hidden folder, and then select Properties.  At the bottom of the general tab, uncheck the 'hidden '.  Click OK.  Select "apply changes to this folder, subfolders and files. Click OK.  Do this for all the hidden folders.  When you are finished, go back to tools > Folder Options > view and the changes that you have made previously.

  Repeat the above by right clicking on start and select open or open all users, no matter what you is not done everything first.

  Print spooler does not and empty the folder printers and faxes

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line (don't forget the quotes)

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on this site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm