Maximum power transfer

Similar Questions

• X 51 R2 - Maximum power 220w VS 330w card

  Hi all

  If I try to install a GTX960 (or a 370 R7) in my X 51 R2, do you think it will work?

  The usual answer is "Get a 330W adapter", but as the two card requires only 1 connector 6-pin PCIe, I guess that the adapter 240W can support. R2 of Dell specifications specifies:

  Power specifications

  • Maximum graphics card power:
    -175 watts (330 Watts AC adapter)
    -150 watts (240 Watts AC adapter)
  • Video connectors: two 6-pin

  If a 960 GTX, 1 x 6-pin to 120W and a 370 R7, 1 x 6-pin to 140W could both work well?

  Thanks for responding!

  Although it is possible to make it work with 240W power brick, depending on whether you have an i3, i5 or i7 cpu on your system, the total absorbed current will probably limit the power brick max. This can lead to system stability problems especially if you have active overclocking or after using system extended when times are higher for higher time and current consumption will cause efficiency of brick of power to drop and will provide less energy than the nominal amount actually.

  Best option is to get the brick of 330W power and avoid stability problems and provide clearance.

• What is the maximum power for the hp pavilion a6650f food?

  Hello

  I have a HP Pavilion a6650f running Windows 7 64 bit os. I want to uprade the power. What is the maximum size for my machine?

  Thank you.

  The largest PSU that you can install is a power supply that fits in your case. Is that you can install a 500w unit, unit of 700w. No matter what the power of the PSU is... What matters and is that the limiting factor is the size of the PSU pyshical. Measure the size of your existing plant of PSU and notice the space between it and optical drives... If you get a power supply which, for many, optics and PSU players bump into one another.

  Frank

• What is the maximum power that I can pass on to a HP p6654y

  Hello, I have a HP p6654y tower that I need to upgrade. Currently, the power supply is only 250w. I'm ready to buy a higher level power source but how high can I go? My motherboard will be ok with a 650w-700w?

  Thank you for your time

  Generally, when this question is asked, there is a reason.  New graphics card. Here's a great guide.  At least read the original message and the following 2 (added text in fact).

• Maximum power PoE switch SG100D - 8 p

  Hi all...

  Help, please

  How PoE power of SG100D - 8 p?

  its port 8 all support PoE?

  Kind regards

  Leonardus

  Hi all

  I wrote to the product manager switch (MP) and requested a document. He continued with a few detailed characteristics indicating the budget POE of 32watts spread over the ports 1 to 4. However, my statement above is correct.

  A section of this document that the PM has sent me, is copied below.

  

  Can't blame leolaohoo for being confused, because I think not publicly in the face of a document which indicates the power dedicated to the POE ports on switches in the 100 series.

  When leolaohoo States in a question in a previous message and request confirmation, "basically what Dave said is that the switch can provide up to 8w of PoE power." my apologies for any misunderstanding.

  The unmanged 8-port POE switches CAN provide up to 32Watts of POE power spread over four ports.

  Best regards, Dave

• How can I increase my PC to 3gigabites in order to use the maximum power on my recorder flip video?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Contact the manufacturer of your computer to confirm it can handle / 3 GB and what type of RAM you need and how it should be installed.  This isn't a Vista problem.  If the installation is correct and appropriate, Vista will automatically recognized the increase and add it to your system configuration.  The question here is whether or not your computer takes everything in charge and what is required and how to install it - questions to the manufacturer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Z500 GPU works is not in performance of power high/Maximum after the spill of Milo

  Hello world!

  Ask anyone advice/assistance on the issue of my laptop. I have Lenovo z500 with GT650m GPU 4 days years ago my cousin accidentally spilled her glass full of Milo on my laptop, fortunately I was able to remove the battery on time and everything dry up after that 24 hours he was already up and running again but I have a problem with the games I usually do listen on average FPS. Before the spill, I was playing Final Fantasy 14 with FPS on average around 45-60, once I start the game I felt the fan pick up speed, power and starts to heat up. After the spill, it seems that the dedicated GPU is not used I only get around 15-19 FPS on average.

  Settings, control panel NVIDIA to power management is already Maximum power Powerformance, power management is also at its peak. I hope someone can help

  Sorry, but you need to take your laptop to a technician or a lenovo for detailed service center check.

  I don't think that anyone here can recommend an action plan to address your laptop after a spill of liquid. Milo can be sticky and may have formed a layer under the keyboard or if liquid has been spilled into the motherboard, it's a matter of time that the other components start to fail.

• Feedback loops for the algorithm of peak power of solar cell

  Hello. I have some experience with Labview but I am struggling with the structures and feedback. I have an instrument that defines a load power voltage and measures. It will be connected to a solar cell that has a peak power (see the trace on the photo). I need a simple program that will make the instrument to oscillate around the point of maximum power. He must set the voltage, power, add a voltage increase, measure power, then add or subtract the voltage according to the question of whether the power has increased or decreased from previous measure. I am attaching a schema. Start V and delta V will be given and fixed. I don't know how to implement with Labview code. Thanks for any help!

  Hello

  Search here for a simulated a simple peak loop

  It allows to store the previous registry data at offset

  e time delay without the processor and also to simulate the transfer of communication with instrument

  concerning

  Tinnitus

• Equium P200-1ED is able to power external USB devices connected on it?

  (1) is anyone able to confirm if the Toshiba Equium P200-1ED is capable of powering an external USB device connected to it via one of its 6 USB ports?

  (2) what is the maximum power that the Toshiba Equium P200-1ED can provide only one USB port?

  (3) can the Toshiba Equium P200-1ED providing the power referred to in Question (2) above to each of its 6 USB ports?

  Please don t after several markets on the same subject.
  After you recommend first one:

  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=115025#115025

• Satellite M40X-129: fans works with a maximum return on Vista

  Hello

  I have the laptop M40X 129 for 2 years and am very satisfied in this regard.
  But since the last few weeks, I have problems with the cooler.
  If I use a 3d task in the lower first 45, that the system works without any problem.
  But his is warming a heater and cooler will then maximum (you can hear it).

  From this moment, the system becomes very slow. I run the system with the highest maximum power and use windows vista professional.
  The laptop feels too hot on the underside (ram?).

  Is it possible to run the cooler from the start at a higher level, for example in the bios or in windows (some options?)?

  I hope you can help me,
  Flo

  Hi Flo

  Usually, there is nothing wrong with your laptop. If the internal temperature rises to a higher level, the cooling modules have to perform with maximum efficiency to lower the temperature!
  While the temperature is high the graphic driver Toshiba decrease the performance of the graphics card in order to avoid a temperature rise.
  That is why the laptop could run slowly!

  What you could do is check the cooling fans and if necessary try to clean with a compressed air jet professional. These aerosols can be purchased from the merchant to the computer.

  However, please note that the installed Vista is in need of more computer resources as the beginning s MS Windows operating system. All devices like CPU and GPU with superior performance and so the temperature is higher with Vista as using other Windows OS such as XP.

  Good bye

• Can power supply Question - I use the 230W power supply with a W540?

  I have a W540, which currently uses a power 170W (8.5 a 20V)

  I got also a docking station for a P50 that has a power of 230W showing 20V 11. 5a.

  The connectors are similar, but I'm hesitant to try the 230W power supply in the W540.

  It is allowed to use the 230W power supply with the W540?

  230 watts is maximum power feeding, it only provides the energy required by the computer.

  I sold my W540, so I can't test it for you. But I do use the ThinkPad X 1 carbon with 230 watts without no problem power adapter.

• How are Tone defined HB (RMS, peak) power PORT?

  Hello

  Just thought on how is the PORT HB your powers defined.

  Example for a PORT1 (1 your HB Source, 40dBm), it is said the Pwr is the amplitude.

  This means that it is a middle power, RMS power, or absolute maximum power?

  I found the answer to my own question.

  I tried to experiment a PORT1 of 40dBm (10W) @ 50 ohm with a 50 ohm load.

  I put Vmeter and Imeter in the interval to display sinusoidal waveforms

  Vpk = 31.62V

  IPeak = 0.6325 A

  Ρcrete = 20W

  PMR = CIPP/2 = 10W

  This means that the PORT in MWO powers are in fact RMS or mean values and not absolute peak of your power.

• How to set the power (watt) to resistance?

  How to set the power (watt) to resistance?

  Hello

  What you can do, for the purposes of simulation, is to use the RESISTOR_RATED component (find under the Basic, the RATED_VIRTUAL family group). It is a component of interactive virtual resistance you can use and set the maximum power. If the power is exceeded, it will show you an animation when this happens.

  Best regards

• why I lose the internet connection when cut the power on my laptop?

  When using the internet with my laptop plugged into the electrical outlet, I have a reliable internet connection. If I unplug my laptop and just use it on battery I keep losing my internet connection. I have a Toshiba Satellite L670 series.

  Hello

  1. what type of Internet connection you have (wired or wireless) sound?

  Method 1: If its wireless network, I suggest you to change the settings of the adapter wireless in power management, go to start-> Device Manager-> wireless-> settings adapter type change efficiency Maximum power settings

  Method 2: If its network adapter will start-> type device manager-> in power management uncheck allow the computer to turn off device

  I hope this information is useful.

• Transmitting the power of version 3.1 of the WAP54G

  Hello

  someone at - it known the transmitting power (in mw) of version 3.1 of the WAP54G?

  Thank you.

  This is the firmware part only third I know for the WAP54G V3.x with the function you're looking for without a lot of other useless to play. Simply go to advanced wireless settings, select the power and configuration of the antenna and your done.

  Note: The maximum power output is 84mw, and change it to any value that has no effect. Something like netstumbler to measure the new signal at the level of the customer in order to give you an idea on the comparative difference in signal.

  Concerning

  Fred