MCP73M01H1 (NAPA) - using 2 + 4 GB of RAM 6400

Similar Questions

• Satellite U305-SP2808 - I am using full 4 GB of RAM

  I have a Satellite U305 - sp2808 the processor is an Intel core (TM) 2 duo CPU T5450 I was reading syntactic processor and 64-bit, the BIOS version is 3.80 02/01/2008.

  My system is configured is posible to upgrade to WIndows 7 64-bit,
  I'm trying to use all the capacity of RAM (4 GB), but in the 32-bit version its imposible, uses only 3 GB.

  Please help me.

  Thank you.

  I put t know how to help with this.
  If your laptop is supported for Win7 64-bit to use it.

  If not... no luck.

• Exe Explorer file process uses all the computers memory RAM

  I googled this question in many different ways and read the post until my eyes crossed. Tried several different

  ideas, checks, analyses, etc.

  This is on a Dell inspirion 3847 running Windows 7 Pro Service pack 1

  a Intel pentium CPU [email protected] Ghz, 4 GB RAM, 1 TB HD (no graphics card or any other card in pci slot)

  a brother MFC7360 n printer connected to the USB port.

  and the HD: (drive C O/S: 855 GB free of GB 909), (recovery E Drive: 17.5 GB free of 47 gb)

  The extent of the installed software is minimal, (only notable is Office 10, digital meal)

  (Digital software dining room is for the POS system), this computer is not the main computer that is running the POS system

  This computer is just linked to the actual POS in bar. (I stop this program and does not affect the)

  problem or situation that we were conducting.)

  (I can give list if necessary other software that is installed).

  And the essentially the only files on the computer (in addition to operating systems, programs, etc.) are Office, "Word files,

  Excel files.

  And a few txt, rtf, pdf, files (very small amount).

  first just noticed recently what happens, but I'm not the primary user on the computer. I checked

  and it seems that no new software or program have been recently installed or changed.  I have a little

  understanding of what the process Explorer exe is and it functions. (NOT a PRO, not a total newbie,)

  If all goes well enough to find help, and not enough to totally screw up.)

  I'll be watching this thread several times per day until solved if need more information, I'll give you...

  Here are the details of the problem:

  random computer freezes, or runs very slowly or get "out of memory" message (during the attempt

  to open any random program) and when...

  I opened the the Task Manager and in "processes" tab, it shows that there is:

  2 examples of "Explorer"exe "running... it uses a small amount of RAM (approx. 10-15 mb)(with nothing)

  Open, other than the Task Manager). Another example of "Explorer"exe "uses (starts on the same amount of)

  RAM use, without having to open anything else) it will start using more and more RAM up to uses almost all

  the available 4 gigabytes of RAM. Also during this process it uses randomly between 0 and 99% of the CPU.

  The CPU usage seems to vary (couldn't see any stable model).  the amount of RAM used begins bass

  then goes very high and the rest standing for this purpose during a random time. (then sometimes descends

  on its own within 1-5 min.). (sometimes does not lower for awhile). More details needed let me

  know, I'll check all speeds or time it takes for the situation to occur, (if necessary)

  TASK MANAGER:

  I opened the location of two Explorer exe files (both take me C/Windows"... ». (same for both

  not a system 32 file, or any other subfolder, just to 'Windows '.

  The two exe process explore "Descriptions" are listed as Windows Explorer.

  I have "Complete the process" towards the 2nd exe explore (one with high memory usage), just that process and she stops to

  a short period of time (and all works well for the time), but even once, it reappears (no exact time frame on how long until)

  Returns), (can check again and again, if necessary), to see if time is right each time to restart the process.

  If I "End process" to the 1st exe explorer (one with normal memory usage), I lose my office. (which from what

  I understand what needs to happen).

  Also get the same results if the process of "End process Tree" for the 1st and 2nd explore exe.

  Checking "properties" of two everything seems the same info. On the 'details' tab shows all of Microsoft, not

  of course, what happens if an info is important. (any info where necessary, I get and publish as needed).

  I know more and different information is no "resource monitor". but was not sure what would happen if, any info of

  It has been necessary.  If necessary you will get what that is. (let me know this as necessary).

  I've scanned any computer with 3 different anti virus (found nothing) programs

  I ran spybot search & destroy found nothing that had to do with this issue and fix some other issues that we found.

  A little info in 'Folder Options' (the 'windows folders in a separate process to launch' is NOT checked.

  and all the options are defined for the default settings (I think) (not sure if this is important)

  like I said read several messages in various forums (on similar sounding problem)... Some say spoke with

  Microsoft technical support who say 'must be the virus', others say started after the recent "windows update" and others

  say the problem of virtual memory and others say he's changed banks 'office' or the 'thumbnails previews.

  These files, and the other says "shell extensions" are the problem. (many recommended (ShellEXView), to)

  Disable all non-microsoft extensions). I was not looking for it.  My problem does not appear to be any good

  program, type file running that is causing this. It seems to happen when the computer is idle (I realize there are always some)

  process background or system running) but it doesn't have to be all open programs.

  At this point, I am open to almost any idea or suggestion.  I will continue to monitor the post until resolved and will get a

  In addition to the information required (less the credit card or account info bosses banking info HA!) (HA!)

  But seriously some help, thoughts, ideas or directions to another post with response, would be greatly appreciated.

  THANKS FOR ANY HELP!

  Hello

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause of your problem.

  If it helps, try the methods and check them off below.

  Method 1

  As you mentioned in your message that your PC is slowing down or freezing then you can automatically diagnose and repair problems that slow down your computer by running the fixit provided in the link below.

  http://go.Microsoft.com/?linkid=9740820

  Additional information:

  For more information you can check the link below:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  Method 2

  If the problem persists I suggest you to try the different steps in the following Microsoft article and check if this may help. You can skip the steps that you have already tried.

  Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Running Microsoft Safety Scanner: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  Kind regards.

• After Effects using only 1% of the RAM

  Dear Adobe,

  My after effects uses only 1% of my ram 32 GB can I know how to increase this, I allocated 8 GB for other application

  Why my application showing.

  Please inform as soon as possible.

  Kind regards

  Knani

  

  

  Perhaps because it doesn't do anything?   When he starts using 32gigs of RAM to display the 'about' dialog that is at this time, you should start to worry.

• Hello! I have a 32-bit version of Windows 7 and I subscribed plan creative mgoe (CC 2015 Photoshop and Lightroom). Unfortunately when I try to use photoshop there is a ram (out of memory) error. I have a 8 giga of ram, and I have already raised the ph ran

  Hello! I have a 32-bit version of Windows 7 and I subscribed plan creative mgoe (CC 2015 Photoshop and Lightroom). Unfortunately when I try to use photoshop there is a ram (out of memory) error. I have a 8 giga of ram, and I have already raised the photoshop preference range.

  It seems that the installation of a 32-bit version of Windows is your mistake. This limits each app to not more than 2-3 gigabytes, no matter how much RAM you install.

• SpeedGrade CC 2014.2 build 8.2x51 reading smoothing / jerky 4K with GPU R9 295 x 2 - it uses only 2 GB of RAM (8.1 Windows 64-bit), Mac OS - same problem

  Hello, guys

  I have following configuration:

  I7-5960 x 4.3 GHz

  32 GB DDR4 RAM

  ATI 295 x 2 8 GB (Gpusniffer.exe watch 3072 MB on each unit of Hawaii)

  Samsung XP941 Ultra M.2 (> 1000 Mb/s)

  Some 850 Pro SSD for H.264 4 k source

  Latest version of Speedgrade CC 16/02/2015 (DUAL MONITOR SETUP - 2560 x 1440 for Interface and 4096 x 2160 for previewing)

  I work with a lot of short 10-15 seconds 4 K 4096 x 2160 24 fps H.264 clips of Panasonic GH4. Import their first CC as some stabilization warp, cut them, save the project and opened in Speedgrade CC all are fantastic smooth in first CC.

  Speedgrade - a simple color - exhibition, some keyframes and simple scoring correction for certain substances. I use the GPU acceleration for sure have lots of 4096 x 2160 4K 24 fps. But it is not flexible and smooth after that a correction is applied. Everything is jerky and freezes the first seconds, when I press 'PLAY'. I used resources, the Manager monitor tasks (Winodws 8.1 64-bit) and Afterburner. And there's what I discovered:

  • Afterburner shows the use of mono-GPU (as we know it for playback only 1 GPU used) the same amount as in first. SpeedGrade CC use 2, 5 GB of VRAM. Also, if I use one zero effect - accelerating gpu, like "transform", for example, imported first, I get "not enough GPU resources" message in Speedgrade. Afterburner shows, CC Speedgrade tried to use more, and then Max 3GB available VRAM during that time. So I turn off these effects, before you open a project in Speedgrade.
  • CPU is low (15%) use, perhaps a little lower, then in the first CC
  • Disc - 3-10%, H.264 is weak on this subject
  • RAM! -is the problem. I have been authorized to use the 29 GB of RAM for Adobe apps. Speedgrade CC use no more then 2-3 GB according to the the Task Manager (for most 2 GB) and 8.1 Windows resource monitor 64-bit Pro. After I finished with the color correction, a project open in first DC, work with lumteri on smooth and! First CC use 9 to 10 GB of RAM to play the same music video in full resolution smoothly!

  
  

  I already reinstalled everything, including drivers for the GPU, 8.1 for Windows and Adobe CC even result.

  MacBook Pro 15 retina end 2013 with i7-4960HQ/16 GB of RAM/Geforce 750 m UPDATE!

  Under Mac Os Yosemite 10.10.2 - same situation here. First CC use 5 GB (of 11 GB of available) 4096 x 2160 Prores 422 HQ and is usable, smooth with a few drops of frame.

  SpeedGrade CC uses 2.5 GB RAM of 4096 x 2160 and it is impossible to use plenty of 4096 x 2160. Only 1/2 resolution of overview is smooth and usable on the screen of the laptop. 4096 x 2160 externally connected through Thunderbolt monitor, it's a lot rougher, I think it's hard for 750 m with 2 GB of VRAM.

  UPDATE! Previous version (CC 2014) of first CC and CC Speedgrade Windows 8.1 64-bit - even situation.

  
  

  What do you think?

  
  

  My opinion - Speedgrade CC is not optimized for 4K resolution. First CC is good for 4K.

  BTW, for more information, latest AMD catalyst driver 14.12 omega has a problem with my R9 295 x 2 and engine reading Mercury (MPE) OpenCL - just black with sound screen, when I turn on the GPU acceleration. So I use the previous version of 14.9. With 14.12 GPUsniffer.exe found a device with 4 GB of VRAM GPU and a GPU with 3 GB of VRAM (normally obligatorily 3 + 3 GB 295 x 2 Dual GPU radeon chip).

  Yes

  So, finally, Speedgrade CC works 95% smooth time with 4096 * 2160 H.264. But it was necessary to turn off all effects in first Pro CC. Nothing new. I found a few discussions on this fact, but after that I spent some time with experiences.

  Stabilizer Warp even alone is enough to make Speedgrade CC really agitated. 'Transform' effect simply blocks Speedgrade CC with "GPU resources.

  Each effect uses some VRAM (for Warp stabilizer 200-300 MB). After you have disabled all effects had load VRAM under/near 2 GB for the little clip 4096 * 2160.

  First CC flies simply with unique x 290 or 295 x 2 (which is the only x 290 during playback). Even 3GB VRAM available software Adobe CC.

  PS Macbook Pro retina 15 "with Geforce 750 M 2 GB VRAM would work smoothly with Prores to half a preview/playback resolution - 2048 * 1080. CC CC SpeedGrade or Premiere Pro with 1/2.

• Photoshop does not use the value amount of ram. Stuck at 6 GB

  Hey guys, recently started having issues with photoshop do not receive the fixed amount of ram needed. I have it set to use 24 GB of Ram (I have 32 GB) tried a reset, tried to reset back to the factory, then put it back, nothing. The strange thing is that if I put it to use only 1 GB of ram, it is still idling to 6 GB. Advice on how to approach this would be greatly appreciated I during the execution of projects that require a lot of attention.

  Thank you.

  Mac or Win?

  If you give complete and detailed information on your configuration and the matter in dispute, such as your platform (Mac or Win), exact versions of your operating system, Photoshop and bridge, specification of the machine, what troubleshooting steps you have taken so far, what you receive error messages if problems with opening files raw as the exact camera brand and model that generated the , etc, someone may be able to help.

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• The new firefox uses a lot too much RAM compared to Chrome or Internet Explorer.

  Before an administrator reacts, please read, because I noticed that many times on this topic in other threads, the admins will respond as the caricature of the characters, not really listen to what people say.
  I have no extensions or add-ons - Firefox (latest version), Chrome (latest version) and Internet Explorer. When I have a blank page open, and 52 M of RAM uses only a single page, Chrome, IE uses 47 M, and Firefox uses 153 M. It's a freshly reinstalled copy, I have no preference at all, no, bookmarks nothing. Can someone explain why Firefox is forced to use three times more memory than its two competitors?

  The problem was that number of tabs was directly proportional to the RAM (1 page ~ 120M, 2 p ~ 240M, etc.). I have a fast computer, but was limited to three legs, and then everything became marshy. In fact, I discovered what it was. A Flash video extension downloader was inappropriate for the JAVA plug-in applications. I have no idea why this was happening, as the GUI for flash video downloader doesn't have Java, and the site that I was downloading is a medical site that uses flash as a protocol of Embedment for their video playback. Anyway, weird, but resolved. If all appears to be a random problem with the new version of FF, it can be flash-video downloader. A rather random shit page (homepage of Yahoo) is now only have access to 72 M of RAM, a reasonable person are all things considered.
  And forgive my aggression. I frequently don't forget that everything is life and death.

• Portege M400 - cannot use full 4 GB of RAM

  I installed two modules of KTT667D2 / 2G on my laptop (Portege M400-103, part No. PPM40E - 012018 G 3) - total do 4 GB. However, the two original Windows XP Tablet and Ubuntu 9.04 are unable to see all 4 GB - they see 3.2 GB only.
  The BIOS displays the amount properly - 4096 Mb.
  I also tried to solve the problem of updating the BIOS to the latest version (3.80, 30/05/08), but two operating systems (Windows and Ubuntu) see still 3.2 GB only.
  Any ideas? Thank you.

  Post edited by: Greendrake

  > However, as well original Windows XP Tablet and Ubuntu 9.04 are unable to see all 4 GB - they see 3.2 GB only.
  That s nothing unusual!
  That s a limitation of 32-bit. All operating systems 32-bit (no matter if it is Vista, XP or Linux) can manage 3.2 GB max.
  Only a 64-bit OS might be able to use and recognize more than 3.2 GB of RAM

  You should read a few articles about 32 bit OS and 4 GB RAM problem.

  See you soon

• Satellite Pro A60 - Windows XP shows / use only a part of RAM available

  Hello guys!

  I am facing strange problems with one of my two A60s. I just upgraded two of them with 1024 MB of RAM the same. One works perfectly, but the other will show me only 410 MBs in Windows. The BIOS indicates the correct size. I changed the RAM from one to the other, but this strange error is always present. The version of the BIOS has been updated to 1.90 and has Windows XP SP2.

  Do you have any suggestions or ideas? Is there an easy way to put the management of RAM in Windows?

  Thank you in advance!

  Ralf

  It s very strange.
  I found that an additional Satellite Pro A60 info has been delivered with a different hardware configuration.
  Some A60 Pro comes with an internal memory of 512 MB and others with only 256 MB internal memory.
  In addition, the internal memory modules cannot be deleted and there is only one slot for memory upgrade.

  But I put t know why the OS shows only 410 MB

  Oh, I forgot to mention that the graphics card, also use the part of the main memory and, therefore, the operating system of shared memory could indicates a value of different memory.

• Qosmio G50/402 - how use the 8 GB of RAM?

  I have a Qosmio G50/402 with 8 GB of RAM installed, even if the use is only 4 GB.

  Is it possible to use the 8 GB?

  Hello

  > How to use 8 GB of RAM?

  The fact is that if the 8 GB of RAM are recognized by the BIOS, if you Windows 7 OS recognizes the 8 GB of RAM, and then everything will run automatically
  You need Win 7 64 - bit to use 8 GB that s all you n t need to allow anything else

• Satellite C660D PSC1YE uses 1.6 GB of RAM of 2 GB of RAM

  Hello

  I have a toshiba laptop (Satellite C660D PSC1YE-01U001FR), and it uses only 1.60 GB of my 2 GB of RAM available.

  How can I fix?

  Thank you!

  Hello

  There is nothing to fix
  The laptop seems to be equipped with the graphics card AMD Radeon HD 6250 and I guess the difference, the 400 MB are used by the graphics card.

• Satellite P300D - h - 13 (PSPDCE) - cannot use full 8 GB of RAM

  Hello!

  Originally on my laptop's RAM 2x2gb. Given that the fromToshiba of the said sheet max of 8 GB (8192 MB) of RAM (DDR2) is possible, I bought 2 x 4 GB (800 MHz, CL6, DDR2, SoDimm - specifications are the same as the original ones). After installation I tried to start the computer, so it is passed the POST and BIOS see all 8192 MB and when it starts to boot the operating system it just go in to reset. I can stop it with button / stop. The installed operating system is Windows 7 64 bit. I also tried with Linux and had the same problem. I tried with only one set of 4GB (but two of them), but still no luck. New memmory is correct because I tested it on another computer and it works without any problem. So there must be a computer problem. I have the latest BIOS 3.30. I called toshiba and they said it should work with any producer's memory as long as they are DDR2 SoDimm.

  No idea what can be wrong or todo?

  Kind regards
  Sasa

  Hey Buddy,

  If Windows doesn't start with new RAM modules, this could mean that the RAM modules are faulty or not compatible with the laptop itself. All the modules of memory compatible with all laptops. What brand of memory is?

  In your case I would try it with pre-tested Toshiba memory modules. You can buy these modules to a service allowed in your country. I searched a bit using Google and the part number for 4 GB of DDR2-800 is PA3670U-1M4G.

• Is it useful to 512 MB of RAM to 2 GB - Equium L20

  I Equium L20-198 that have Intel Celeron M 370 / 1 Mb L2 cache and 512 RAM. I was wondering is it worth to upgrade to 2 GB RAM to increase performance in 3D using programs such as Max and Auto CAD 3D with this Celeron processor?

  This update is going to be effective in terms of operation of the system faster?

  For upgrade of RAM is without any reasonable doubt, and with more RAM your laptop will work much better and faster. I use all the apps but with 2 GB of RAM, working with these applications will be much better. The tools everything you need for the operations of the 3D and calculation skills will run much faster than before.

• Re: Can Satellite A100-499 - I use Kingston HyperX DDR2-667 RAM?

  Hello.

  I have a Toshiba Satellite A100-499 with chipset Intel 945 PM and with 1 GB of RAM at 533 Mhz (this is the memory that came by default when it was purchased). I want to upgrade the memory to 4 GB 667 MHz and I saw two Kingston hyperx 2 GB DDR2 - 667 PC2 - 5300 CL4 (KHX5300S2LLK2 / 4G).

  I ' w concerned about the compatibility of this memory with my laptop. Memory that is shown in my laptop (KT667D2 / 2G) in the site web of Toshiba is also kingston and technical specifications are similar, but time lag case which I've not been able to verify. I'm looking for the forum and it seems that Toshiba laptops are very delicate with the memory.

  Did someone knows or has had experience with this combination? I don't want to spend the money to have to sell it later.

  Hello

  Theoretically, you can also use the Kingston HyperX modules. They are very similar to the normal Kingston modules, but they are a little faster. Certain times are may be lower, but this should t be a problem because it will be set automatically from the BIOS.

  A good friend of me always is the HyperX modules for its notebooks and there has never been a problem.
  In the worst cases the modules don't work, that you can bring it back to the computer store and ask Kingston normal modules.