MCS 7845

Similar Questions

• Unity 4.04/NIC Teaming / MCS - 7845

  Just got two MCS-7845 to support a deployment unit 4.04 and noticed that the second NETWORK card is disabled in the BIOS. IRQ also noticed that there is not more available is to be used. Does anyone else have this problem? Can I use the IRQ that overlap or disable a service such as ILO? Thank you, J.

  Configuration of two network cards in the Cisco Unity Server

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_installation_guide_chapter09186a00801ba4d4.html#wp1592700

  No need to configure the IRQ. Windows maintains that with sharing IRQ - u must come from NT and BACK days.

• DESIGN OF CLUSTER CUCM

  Hi team,

  I met the following requirement but has no gat delete all documents. My requirement is: a CUCM Cluster should have variour MCS Server model with the same software.

  My request is that I can build a Cluster of CUCM 8.0 which includes MCS 7845, MCS7835 & MCS7825.

  Please share me the link that contains related information.

  Appreciate your kind cooperation.

  Kind regards

  Nirmal

  Hi nirmal

  Technically CUCM clustering can be done using the same software and different hardware

  However this is not a recommended solution as material different can support a different amount of records and call control and this could lead to issues with large implementations due to the incompatibility of hardware

  Hope this helps

  If useful rates

• Autonomous CVP w Reporting. VB Admin out of Service

  CVP 4.1

  Autonomous with reporting model:

  1 GW 3845

  1 MCS 7845 call + VxML Server

  1 MCS 7845 Reporting Server

  1 MCS 7835 OPerations Console

  1 studio of MCS 7835

  I registered online PAK codes for the

  -Server-Sw and applied the ICA on the server to call

  -CVP 20 VxML Ports on the VxML Server 4.x

  -Reporting Prem lic on the report server

  using the operations Console

  Also, added the GW and transferred the CVPSelfService.tcl, the CVPSelfServiceBootStrap.vxml and the CriticalError.wav to the same using the Console.

  Call the server, server VxML and Reporting Server are UP on the Console.

  Have restarted the combo CallServer + Vxml Server, but the speech browser shows out of Service and tries to contact the GK.

  But it is independent, there is no GA, why VB is trying to get a GK?

  I didn't go any single on the VB Admin command, as the configuration guide has not said to me to do.

  First Question:

  1. While installation was SVC Call Server I supposed to select H.323 as Autostart CVP VB services at startup, no. Sytem restart on error display & CVP VB window on startup, or NOT?

  Because I did, but then I added call server in the Console of the operation - I did not any service at all.

  2. If the answer to the above question is that Yes, I had to select H.323 Services/Start VB window etc. during the installation options. Then what don't get me, why the VB is out of service and it is looking for a GA?

  Kindly help.

  No voice browser is required.

  Kind regards

  Geoff

• Update of telepresence

  Dear Sirs,

  our clients have three CTS-3000, CUCM Cluster, Manager of CTS, CTMS.
  CTS-3000 - Firmware version is 1.4.3.
  CUCM - Version is 5.1.3.2000 - 3, the material is MCS-7825-H3.
  CTS Manager - Version is 1.3.1.0 (460), the material is MCS-7835-H2.
  CTMS - Version 1.1.0.0 (254), material is MCS-7845-H2.

  Customer has a Cisco warranty. The customer now wants
  upgrade of the solution up to 1.6 version and CUCM up to version 7.1.

  1. the following (after 1.4.3) versions of firmware are available for the CTS-3000:
  a. 1.4.7 (2229);
  b. 1.5.1 (2082).
  c. 1.5.10 (3648);
  d. 1.5.11 (3659);
  e. 1.5.12 (3701);
  f. 1.5.13 (3717);
  g. 1.5.3 (2115);
  h. 1.6.0 (3954);
  i. 1.6.2 (4023);
  j. 1.6.3 (4042).
  Should install us all versions of firmware under the instruction of one or
  There is a recommended update sequence?

  2. the following versions of software are available for the CTS Manager:
  a. 1.3.2 (466);
  b. 1.4.0 (279);
  c. 1.5.1 (420);
  d. 1.5.2 (423);
  e. 1.6.0 (220);
  f. 1.6.2 (64);
  g. 1.6.3 (113).
  Should install us all versions of the software under the order by one or
  There is a recommended update sequence?

  3. the following versions of software are available for Community trade marks:
  a. 1.1.1 (30);
  b. 1.1.2(6);
  c. 1.5.0 (222);
  d. 1.5.1 (2);
  e. 1.5.2 (21);
  f. 1.5.3.12;
  g. 1.5.4(4);
  h. 1.5.5(1);
  i. 1.5.6(1);
  j. 1.6.0 (108);
  k. 1.6.1(2);
  l. 1.6.2(3);
  Mr. 1.6.3(2).
  Should install us all versions of the software under the order by one or
  There is a recommended update sequence?

  4. what sequence of update should be used?
  Firstly the CUCM, then CTM, Community trade marks and the CTS-3000 to last.
  Or there are more good sequence?

  Thanks in advance.

  1. you can go directly to the latest version 1.6.3

  2. If you want to go 1.6.X you must update in 1.4 first and then do a direct to 1.6.3 upgrade once you run 1.4.0

  http://www.Cisco.com/en/us/partner/docs/Telepresence/cts_manager/1_6/Admin/ctm_instalCTS_M.html#wp1080226

  3.

  The upgrade to version 1.6.0 CTMS

  When the upgrade to CTMS version 1.6.0 you run CTMS Release 1.1.2 or later. If you are running a version prior to CTMS Release 1.1.2 update to version 1.1.2 CTMS before the upgrade to CTMS version 1.6.0.

  http://www.Cisco.com/en/us/partner/docs/Telepresence/multipoint_switch/1_6/release/notes/CTMS_1_6_RNs.html#wp96444

  4. I first put the CTM CUCM, then CTM and last endpoints

  HTH

• Upgrade of connection of the unit

  There is a lot of documentation on CUCM Upgrade to 9.1.2 but less documentation on the connection of the unit.

  I have to migrate two Clusters of connection of the unit running 7.1.3 version on MCS 7845-H2 to two clusters of connections of the unit running 9.1.2 UCS.

  The Jump Option is available for this upgrade?

  Migrating from a Cisco Unity Connection Standalone physical server to a Virtual Machine connection 9.x

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/connection/9x/upgrade...

• ASIX MCS 7832 pilot to 200 for USB 2.0 to Ethernet?

  Digitus made a USB to Ethernet Dongle (DN-10050) using the 6 MCS 7832 chip.

  This dongle would be directly usable in 200?

  This is true, the driver 6 MCS 7832 must be pre-installed by Toshiba or be already present in ICS.

  If not, is there another driver present to 200 (with the flavor of the ICS) makes "USB 2.0 to Ethernet?

  Thank you in advance.

  Hello

  I read in some Forums Android that Digitus Ethernet USB adapter is not supported by Android.

  > To make this true, 6 MCS 7832 driver should be pre-installed by Toshiba or already present in ICS.

  Don t think that there is no present in Ice Cream Sandwitch and according to the page Asix, the Android driver for this chip. Just the driver Windows, Linux, and Mac OS are available.
  http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=108;74;109&PLI = 74

• An embedded program can wait for little 13/14/15 of MCS?

  Hello. I want to use a program embarked on a map of NI7344 to wait until it is marked to go ahead of the host machine.

  The function 'flex_wait_on_event' would seem the only logical possibility but documentation implies that bits 8 to 15 MustON and MustOff masks are ignored.

  Is there another function, I don't know?  Without doubt, there is a way to do it from the host can set the MCS registry with "flex_set_status_momo".

  Thanks in advance SDG

  SDG,

  have you already discovered, flex_wait_on_event does not work for you. There are several alternatives to interrupt the execution of a program on board. E. g., you can write to a variable on the host. The program on Board could read this value and use a comparison operation to satisfy the conditional jump surgery ocndition. Then go back to a label before the comparison operation and jump out of this loop, when the host has sent the command to continue (= modified the value of the variable on board).

  Could you please explain what you are trying to accomplish with your program on board? In general there are only very few applications that really require embedded programs. Programs on board only work not significantly faster host programs and they also don't run with better determinism, as they are performed in a low-priority task on the 68331 to the Board of Directors.

  A typical usecase for an integrated program prevents a gesture, if forces become too high by monitoring an entry, but they ar analog rarly used to complete implementation move sequences, as there is almost no real advantage for tasks like this.

  Kind regards

  Jochen

• Derby. Missing MCS

  The dfrg.mcs file is missing after a session of cleaning programs and old files. Other necessary system files are intact. How to replace or repair the program defragmintation in a Windows XP machine with service pack 3?

  Hello

  1. have you made changes on the computer before this problem?
  2. when exactly you get this error message?
  3. What is the exact error message?

  Method 1:

  Reregister the software components of Defragmenter.

  a. click on Start, runand type regsvr32 dfrgsnap.dll and press to enter.

  b. click Start, runand type regsvr32 dfrgui.dll and press to enter.

  Method 2:

  I suggest you run a SFC scan.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• MCS-7835-H3 headed Amber hard drive alarm

  Hello everyone,

  I have a server MCS-7835-H3, DMS 5.2.1. The server has 4 hard drive (300 GB each disc). I noticed that one disc is alarmed, the led is amber.

  I was looking for literature on this topic, but I can't find anything.

  I was watching the b.b.q and IAA interface for some information on the status of the drives and nothing... in the log files or...

  Can anyone helpme to know what is happening?

  So thanks a lot!

  

  Error light = replace. These things are pretty accurate, so if you have an error on the disk it will probably fail at some point if it isn't already.

  Aaron

• Possible to install UCCE on the same server as CallManager MCS

  Hello

  Trying to set up improved 4.5 on an MCS 7835 UCCE. Now, if I want to install CallManager 5.1 in this environment, can I put the same box of MCS? Or do I have to buy an another MCS?

  Thanks in advance.

  Juan, I think that you misread his post.

  "If I changed CallManager express to 4.2 then it would be possible to run on the same server MCS?

  I don't think that he meant "CallManager express."

  The solution, lpezi, is to read the compatibility matrix where all your questions are answered.

  http://www.Cisco.com/univercd/CC/TD/doc/product/voice/sw_ap_to/crscomtx.PDF

  Kind regards

  Geoff

• DMM 5.3 on MCS - 7835 H 3 and DMM-FA-C210-K9 failover

  Hello

  We are working with a customer who wants to add redundancy to their existing environment of DMM. We initially deployed their solution on a Server 3 - DMS MCS - 7835H and finally improved to 5.3. Now, they want to add the failover and the DMM-FA-C210-K9 with DMM-FASW-52-K9 bought another partner. After sitting idle for several months they have committed to us to help find a solution.

  I see 5.4 is able to run on a virtual machine. I have the following questions.

  Can I upgrade the DMS MCS7835H3 v.5.4? Based on the upgrade document 5.4, it seems to corroborate.

  • If we can improve the MCS7835HE-DMS 5.4 failover will work with the DMM-FA-C210-K9 Server?

  Since they already have the DMM-FA-C210-K9 server, can it be used as a host VMware to run 5.4 practically?

  • If so, failover will work with the MCS - 7835H 5.4 3 - DMS Server?

  Ray,

  The answer to both your questions is no.  None of these options is supported.

  If you use a virtual host primary servers and failover must be virtual.  You cannot mix types here.

  Also the MCS 7835 is not supported in a failover deployment.  Only the DMM-SVR-C210-K9 as backend is supported by 5.4 tipping guide. http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_4/dms/failover_guide/dmsfailover.pdf .  However, the DMM FA C210 K9 can be used as the fallback server.

  Hope this helps

  John

• The MCS 3.1.1 SP 3 MSC 3.2 SP1 server upgrade

  I get an error when trying to upgrade my server MCS SP1 3.1.1 to 3.2 SP1... (See attachment) (CSM, 3.1.1 incorrect version is not compatible with this service pack version) I need to make my MCS 3.2 server to be able to support me JOINT-2 sensors to version 6.1

  Thank you

  Update to 3.1.1 to 3.2 level, then put on 3.2 SP1.

• DMM 5.2.2 - 5.2.3 MCS 7835-H2

  Hi all.

  I have a client that is running DMM 5.2.2 on a MCS 7835-H2. They bought a C210 to run DMM 5.2.3 a migration of the CSM hardware platform. I know that DMM 5.2.3 is not supported on the CSM hardware platform.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMS/upgrade/guide/523UpgradeGuide.html#wp316812

  However, I want to do is upgrade their 5.2.2 existing DMM on MCS to 5.2.3 in a migration window. Once completed, the system backup and restore to DMM 5.2.3 on C210.

  My question is it really possible to upgrade the DMM 5.2.2 to 5.2.3 on MCS 7835 - H2, regardless of whether If Cisco will support it or not.

  Thank you, Tim.

  Tim,

  The MCS - H2 will not support the 5.2.3 in all conditions, you can't fool the upgrade of point 5.2.3 on this platform.

  Your best option is to wait that the STM to the UCS migration tool, this tool is currently in the final stages and should be available shortly (I think in a few weeks - not yet fixed ETA). This migration tool can solve your problem, it backs up the database and the configuration of a MCS platform, and you will be able to seamlessly restore on a material of UCS work 5.2.3.

  Thank you

  Sagar Dhanrale

• What is the procedure of upgrading since version 7.1 of CUCM (MCS Server) call manager to version 10.2 of CUCM (on the server of the UCS)

  Hello

  What is the procedure to upgrade the call manager since version 7.1 of CUCM (MCS Server) to version 10.2 of CUCM (on the server of the UCS), please let me know the steps to what would be the backup procedures and upgrades.

  Concerning

  Gerard

  I suggest reading this guide to make sure that you have prepared your environment to support the first 10.x. The link below also contains the path to upgrade to 10.0 (1).

  One of the ways to do this is:

  1 / apply cooling cop upgrade file on all servers in the cluster.

  2 / upgrade the cluster to 8.6 (2). Make a backup of the cluster.

  3 / build a cluster of servers 8.6 (2) on the virtual machines and assign them the same host name and the IP address of the cluster hardware. (You may need to keep these on a separate network until turn off hardware machines)

  4 / restoration of the backup of the pile of material on the VM cluster.

  5 / upgrade cluster VM to 10.0 (1).

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/upgrade/10_0_1/C...