MCU selfview

Similar Questions

• Mackie MCU = terrible

  Pilot lite Motu Micro: worm: 1.6.68717

  Mackie MCU: 2.1.2

  10.2.1 logic

  EL Capitan 10.11.3

  -very incompatible with the logical connection.

  -labels of led are off when passing parameters.

  -the master fader movement becomes somehow connected with the titles at random.

  -volume fader. On the screen the fader following correctly and fits. Let go of the Mackie mcu jumps fader to unity win while the rest screen fader level adjusted without jumping to unity gain. Touching Mackie fader still re - synchronizes the two sliders.

  I could go on. Never seen this problem before. At one point he stopped to communicate with logic. Had to reset the midi driver and it kind of fixed it. But he has bad after a few experiments/use.

  I have an audio track, but also a followed midi drum.

  Anyone else using any surface control mackie with any success?

  The problem seems to be your lunch and not the MCU interface. I'm running a very well based MCU configuration, and what you describe is certainly symptomatic of a problem of MIDI communication. So try a different interface. In this case it is a Pro MCU with USB, try another USB port and cable. If all this does not help, however made a defective unit to the MCU.

  See you soon,.

  Jazz

• Is there a model for MCU PIC12F675?

  I am currently working on a design that integrates the MCU PIC12F675 of Microchip. I want to be able to simulate this circuit in Multisim, however, there is no included model for her. Is it possible to get this simulation model?

  Hello

  In Multisim allows only to simulate 8051/8052 and PIC16F84/PIC16F84A. There is no way to add new models of microcontrollers to the database.

  Kind regards

• Communication between LabVIEW and MCU based on Modbus Protocol

  Hello

  I am a first year student in the port.and series applications see you, my projiect needs to communicate between LV and MCU based on Modbus Protocol.all configure it are correct, but the lv to send false information which is not suitable for modbus.i do not know how to fix it.

  My programs are:

  Why did you decide to write your own code instead of what is already available? If you had done a search, you would have easily found the modbus library. Just give a try.

• Random Jabber disconnections of MCU calls

  Good afternoon

  Hope you can help me. I've seen a few posts with these error messages in but they are not quite what is happening here

  My customer is having a problem, where a number of their Jabber users (for windows) is randomly calls MCU is disconnected on their server of telepresence. The disconnection occurs in less than a minute.

  None of the presentations are shared when this happens.

  The errors are:

  Operation BYE failed because the network error

  End of appeal because INVITE it transaction timeout

  Call due to the failure of closing invitations

  GST 320 - software version: 4.0 (2.8)

  Made - known Jabber clients versions 4.4 and 4.7

  Currently waiting for the client to update me on MSDS, blade of conductor and versions of software VCSE and VCSC

  event_log_screenshot.PNG

  

  telepresence_server_status.PNG

  

  I hope you can help

  Thank you very much

  Luke

  In general, this is because of a network problem, where SIP messages are not sent correctly between Jabber and reliable TP server, in this case, I'm guessing the OK/acknowledgement of receipt are not sent to the head of the Orchestra/TP server and the server TP is disconnecting the call. Is there a firewall in the mixture, do you SIP ALG turned on? If I look at the firewall and disable SIP algo

• Question MCU

  Hi guys, I need your help, I made a big mistake, I reset of MCU and after the reboot of the MCU, I lost the product key or feature

  I need to know how can I get a new

  I don't have a contract with Cisco

  I bought the MCU on Ebay!

  I've corrected the link in my previous answer, for some reason when it copied, left part of the URL.

  I have not a way to take a screenshot at the moment, but when you go to this site, look for the option "Obtain other licenses" and in this drop-down list, you must select "License TelePresence to return", then enter the serial number of your MCU.

• Telepresence using PVDM3 instead of standalone MCU

  Hello

  Can anyone advise what will be limited if we use PVDM3 ISRG2 router as a multitouch device instead autonomous telepresence MCU.

  Also we prefer to use CUCM v9.x to VCS.

  Materials will be used:

  1 CUCMBE v9.x

  2 PVDM3-256 (Qty: 2) on 2951 ISRG2

  3 CTS-MX300-55-K9 (Qty: 4)

  4 CTS-EX90-K9 (Qty: 4)

  5 cisco 99971 phones.

  Any valuable advice would be much appreciated

  BR, Shimjid.

  No it's not. There is no control of the layout or floor.

  Please remember useful frequency responses and identify useful or correct answers.

• Why the MCU is automatically added to the conferences in TMS?

  Info:

  Endpoints: Tandberg 6000 MXP & 95 MXP

  TMS: 13.2.2

  Codian MCU 4510: Software version 4.4

  Tandberg GK: N6.3

  Tandberg BC: Q6.3

  When I create a conference at TMS and want an end point to compose our system to an MCU on another site (confined), the our local MCU is automatically added to the Conference, for some reason any.  For example, if I create a conference with room 123 and number 'Dial Out' external 2222222, TMS adds MCU of our system and forces to compose both room 123 and 2222222, which is totally useless.  This should be simply, what is the endpoint is, a direct line to 2222222.  Why the MCU is being added?  This will use licenses MCU in haste when it is not necessary at all.

  I went through TMS > administration tools > Configuration > General settings, network settings and conference settings and cannot understand why the MCU is added.  If we dial manually, no problem.  My goal is to automate the entire composition, however.

  Pointers?  I put some of the parameters of the TMS > Admin Tools > Configuration > Conference settings below.

  

  Luke

  Hello

  Reduce the bandwidth of conference help? TMS could add a MCU if it detects that one or more participants do not support the bandwidth conference.

  Kind regards

  Kjetil

• [Issue] it is possbile to use MCU 4501 on network 1:1 NAT?

  Hi, I have a very simple question.

  I'll put MCU 4501 model on a private network to connect to public IP codec devices.

  Without devices INCAPACITANTS, Turn, or VCS, it works standalone with H323 and its private IP address is set to 1:1 public IP address.

  In this position, is that it is possible another codec public IP can join the session of MCU 4501?

  In my view, would be well accepted, but given media cannot be accepted because the IP address in the payload would be signaling missmatching.

  No one knows about it? or can I use some free public STUN, ENABLE Server H323 Direct mode? or do it by myself?

  I have no senior engineer and I have to learn about it, everybody ask me when they stuck on the frame.

  This site is the last hope for me, and I'm sorry for imconvient read, it is not my mother tongue.

  Thank you.

  For H.323, IP address of the port media negotiate during the call setup is not using the IP header.

  If your compatible Firewall H.323 AGL, handful of firewall NAT IP and H.323 signal header conversion.

  However for MCU, you can consider the firewall on MCU option if you are looking for private/public double network connection.

• What is the difference bewteen MCU, VCS, and SRI (DSP-3)

  Hi all

  We lack CUCM 9.X. I want to integrate Cisco 9971, 8945 with TP Endpoint (EX60 and Tandberg C40). I read this wonderful document (https://supportforums.cisco.com/docs/DOC-30750), but I still have some doubts.

  What is the difference bewteen MCU, VCS, and SRI (DSP-3). For all I know, ISR running DSP3 is the chepaiest option but I don't know if the HD video is supported.

  Thanks regarding

  Remember messages useful rate by clicking on the stars below.
  Favor calificar todos las responses useful dando click in las estrellas mas abajo.
  ___________________________________________
  LinkedIn profile: do.linkedin.com/in/leosalcie

  Hello

  According to the document, you are referring to which I posted previously

  VCS is a call control system call manager but for video end points only, then CUCM is for voice and video, and now it becomes control system of very mature appeal for video communications with native support for video of many recordings of points

  MCU is a material that can be used to host the multi point/party video calls that can be registered to CUCM or VCS according to design

  SRI with DSP/PVDM 3 is the concept of the MCU, but can be used for small multi-point calls and normally remote sites that need local accommodation to a call to reduce the load on the WAN link when most of the participant in the same place for example! and it dose taken support HD but limited features compared to MCU

  for example PVDM3 doe does not support HD when participants are expected to use different video formats

  hope this helps

• Why replace MSE 8510 MCU 4.4 with Telepresence Server (3.1)

  We have a with MCU 4.4 MSE 8510. Looking at the software accessible to the general public, that looks like that I could replace the software with the telepresence instead server software.

  Why I do this? What can I win (and lose) by? I don't have any old CTS systems, just Jabber, MXP and C systems. Is telepresence server software that is actively developed while the old software MCU is not?

  Thank you

  I agree with you, Codian MCU is the best.   =)

  This is why I think Cisco is not going to add MCU multi-screen support, because if MCU multi-screen support, I don't know that all customers would not want to migrate to server TP or buy a new server TP.

  But because of these two main features of server TP, we think about its use, who are the multimonitor support and support for the optimization of the resources with the driver.

  Many Cisco! As always... In this way, they can keep the two products on the market, MCU and GST.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Automatically add the MCU recorded lectures

  Hi all

  When you create a conference call between and endpoint and a registration server, the MCU should be automatically added to these conferences. At present, the MCU will only add itself when the particular codec models are currently in use.

  for example

  Click new conference, add ONE of the following, codec models

  1700MXP
  770mxp
  880MXP
  Edge 95MXP
  3000MXP

  Add TCS registration server and it WORKS, the MCU is automatically added. This allows us to customize the page layout (we generally to mute the video of the CSTC). See green arrow in the attached jpeg.

  Repeat the process on any of these models.

  C40
  SX80
  SX20
  C20
  EX60
  Polycom HDX 8000 HD
  6000MXP

  Now, it fails. The MCU not will automatically itself add to the Conference. See the red arrow in the attached jpg.

  Any ideas? The only thing that I know so far is that its broad base of model of endpoint. I have searched on the parameters of MCU, MSDS etc but can't find anything related to this at all.

  Thank you very much

  Rhys

  Don't know why the MCU is automatically added for some endpoints and not others without knowing more about the configuration keys and the option on the endpoints.

  If you want the MCU to always add to scheduled conferences, you must set the following options under administrative tools > Configuration > conference settings:

  1. External MCU use in routing: always
  2. MCU route Type preferred: Cisco TelePresence MCU

  The configuration of this setting is the only way to ensure an MCU is always included, please note that this is a system wide setting and will affect all scheduled conferences regardless of the number of participants and who they are.  If you wish, you can also set the first option above 'Always, except for point to point', which will allow you to choose when the SCM must be used if you have rather a choice between point-to-point and multipoint calls using the MCU.

• Tab MCU 4220 Gateway

  Hello

  In the MCU 4220 interface, there is a tab for the gateway. What is the point of having this and how do you use it?

  How I would like to iniate a call with this 'bridge '?

  Excerpt from the online help:

  The MCU can then actually call through these gateways configured for one or more endpoints that are registered with the entry door, but would not accessible directly from the MCU.

  Refer to the 'Management of gateways' section of the online help for the MCU series starting on pg 120.

  If you have any other questions, you must move your question to the section of telepresence to the forums where are discussed more actively to these devices.  You can move your discussion by editing your message and change the categories at the bottom.

• 5320 MCU Sip settings

  I want to deploy 5320 MCU as multimedia cm unified using this resource guide (page 36). But I did not 'Use the trunk' option on page settings_sip.html webUI. I also have access to an another 5320 MCU with the same set of function keys, where this option is available. Only difference between the two devices is the firmware version:

  4.4 (3.42) on my device and 4.5 (1.45) on devices where "Trunk of use" is available.

  Q1: Should I upgrade or there is workaround to use sip trunk without this option?

  Q2: Do I have to pay for this update?

  Q3: If my distributor can not get it to me or my relationships with them stopped can get updates directly from cisco?

  See the section "Deployment of a Unified CM MCU as a multimedia resource" in the installation guide that matches your version of software MCU.

  MCU 4.4 Installation Guide

  MCU 4.5 installation guide

  Upgrades of software MCU does not require a key to unblocking, but a contract of active service for the MCU is required to download the software.

  Series 5300 MCU software

• Maximum-4205 MCU video size is disable

  Greetings,

  I have a 4205 MCU and the maximum video size was off. Can someone help me to activate this field.

  AR$

  Huong VU

  HI Huong.  Sorry for the delay to get back to you.  Seems that your lack the optionkey 4CIF.  Once I have remove this key to my MCU 4200, mine looks the same.

  Would be best to hire your SE or account management team to get this added to your MCU key so that this decline down to work.

  We can generate you a temporary until you get it sorted to get a permanent.  You can send me a private message with your SN of MCU, and we can look into this for you.

  Sorry for the late response on this one.  Let me know how you do.  Thank you!

  VR

  Patrick