Re: No sound using a HDMI cable

Similar Questions

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• I currently use an HDMI cable to connect my laptop to my TV for streaming video. Anyway is to close the Mac but still flow from it? Right now it just runs in "standby mode", and the connection is lost.

  Hi all

  I currently use a HDMI cable to the video stream from my MacBook to my TV. It works fine except that it doesn't seem to be a way to close the laptop and always maintain the connection with the TV. First of all, I do not leave my laptop open, exposed if you want, when you're arms reach. Then, when it is connected to the TV, it is at least 2 to 3 yards away. In addition, I have recently adopted a cat. His favorite thing to do is to tap dance across the keyboard. Therefore, I am more able to let the laptop taken in isolation within the connective range of HDMI cable because the cat will walk on it. In any case, I tried to find a way to close the lid of the laptop, the laptop to stay awake and keep the connection to the TV. Any ideas?

  Thank you

  Sally

  See if there is a solution:

  https://support.Apple.com/en-us/HT201834

  Ciao.

• Satellite L650 - no sound on the TV using an HDMI cable

  using a HDMI to connect to the TV picture cable works fine but no sound through the TV, sound out of speakers to computer. How can I configure so sound comes through the TV?

  Hello

  Usually it should automatically work but try it please check the settings in the sound properties > reading.
  Switch off the speakers and turn on the digital audio device (HDMI).

• No sound from the TV using a HDMI cable not connected to the laptop ASUS G75VW.

  I have an ASUS G75VW, when I connect the HDMI to my TV, I get only audio through my computer laptop speakers or headphones, while it is plugged.  In addition, the TV picture is only 480 p.  When I check the sound icon, it shows that the HDMI port is "not connected" even though it is.  I tried to uninstall and reinstall the driver on both the NVIDIA site and the site of ASUS.  Same question.  Help, please!

  Hello

  Make sure that it has the TV volume.

  You can also make sure that the connections are appropriate. Try to connect to another HDMI port as well.

  Refer to the section: "Check if the cables are connected correctly" and set the HDMI audio device as the default value.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you to consult the steps mentioned by "Karthik Vengaloor responded on 14 January 2013" and perform useful methods.

  Reference:

  Windows 8 audio via hdmi on desktop cable

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-audio-through-a-HDMI-cable-on-desktop/79aaa786-8311-4FA2-8206-0e57b8861baf

  Hope this information helps. Response with status so that we can help you.

• Satellite C55D - no sound on the TV using an HDMI cable.

  Hello

  When I connect my laptop via hdmi cable to the TV digital sound is heard through the speakers, but not on TV.
  It worked well before, not now.
  Everything is connected, I tested with new cables. It is set up.
  Devices, it seems that none connected.

  Help, please?

  Try to activate sound output manually in the sound properties. What entries you can see in the devices section of reading?

  

• HP Envy 360: Boot Device no error found - when you use a HDMI cable only

  Boot Device not found error - when I connect an HDMI cable to my Dell monitor. (I do with this laptop in my another desktop and it works very well).

  "Please install an operating system on your hard drive."

  F2 for HDD diagnosis (3F0)

  Go to hp.com/go/techcenter/pcdiags

  As soon as I disconnect the HDMI and reboot everything is big again.

  I tried with 2 HDMI cables of different (one that works very well in my office and my HP Monitor).

  I really need to use a large monitor when you work... any suggestions?  Thank you! -kelly

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that the computer throws to a not found error message boot device when it is plugged into an external monitor via HDMI. It will be a privilege to help you.

  A remarkable work was done by an extensive troubleshooting before asking the question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and the value certainly your relationship with HP. We greatly appreciate you for doing business with HP and consider a privilege to share this platform with you.

  Please perform a hard reset to see if the computer goes off and changes things. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.
  • Please perform a default bios also.

  Please check in the bios if the bios can be extended to this monitor via a cable HDMI to work.

  If please check on another screen as one TV (not another monitor) with the computer for windows startup and the cable connected to the TV HDMI to further isolate the issue.

  Please update the bios, the chipset and drivers of this link http://hp.com/drivers graphics cards

  Please visit these links for assistance: http://support.hp.com/us-en/product/HP-Spectre-XT-15-Ultrabook/5296019/model/5333249/document/c01186408/

  Link 2 http://support.hp.com/in-en/document/c01443463

  Run the system diagnostics without the connected HDMi cable, that if you don't have not done from the above link 2. You can ignore the link 2 If this was done without the connected monitor.

  I really hope that the problem is solved without hassle and things work fine. I hope this helps. Please let me know how it works.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution".

  Now carefully and have a wonderful week ahead.

• HP 2509 m screen flashes and turns off using a HDMI Cable entry

  I have problems with my new HP2509m monitor. When I connect to my cable box using the HDMI connection the screen image flashes for a few seconds and then goes black for a few seconds and continues to do so. The time interval varies from May 3 to 6 seconds in each phase.

  It's the second monitor I got that this behavior. When I bought my system in October I ordered the 23 "monitor and it worked fine with the HDMI input, but I had trouble with the PC and he traded. The 2509 was introduced at the same time so I decided to share my monitor 23 "to 25", but now I'm regretting this decision. The main reason I bought the extra monitor should have the opportunity to move to the HDMI input for TV viewing, save space in my office.

  I tried the monitor using the same HDMI cable plug into the HDMI from my computer and the light is very good, so it seems to be a problem with the signal from the cable, but everything worked with the 23 "monitor leaving I think there is an issue with tuner HDMI monitor 2509.

  I searched the documentation on the HP site and google search but have found nothing of the sort. Someone has seen this and is there a solution for this? I like to keep the monitor. Thank you.

  Message edited by JudgeLeo on 03/12/2009 20:00
  Message edited by JudgeLeo on 03/12/2009 20:03
  Message edited by JudgeLeo on 03/12/2009 20:03

  Apparently, I was early to the part of the questions of this monitor.

  It turns out that the monitor is not compatible with the decoder I've had. The box is made by the Asian Development Bank and is capable of displaying 1080I content. 1080I is not the issue but because I can use a HDMI to DVI adapter and connect to the monitor and it works OK; It is, so I don't have the computer plugged into the DVI connector as I wanted.

  My cable provider was kind enough to take the monitor and test. They discovered that one of their old version of (amino) cable boxes works very well with the monitor. They swapped the box and it worked well since.

  I use my cable provider HDMI cable, so I don't know the spec version that is.

  My advice to anyone affected by the flashing HDMI display is to get a HDMI/DVI adapter and try it. They are supplied with a certain monitors so that they are fairly easy to find if you know someone who works in a computer SCIENCE Department. If the monitor displays the signal correctly then the question is probably the cable box or as another poster suggested, the cable can be out of spec.

  It is convenient to have the double monitor as a TV. The image quality is superb, but the sound is not. I do not understand why manufacturers monitor for skimping on the speakers. A monitor with its 'premium quality' would be a point of sale, and buyers would be happy to pay for the upgrade. I don't know about a lot of people like me it's simplify - remove the clutter and cables of our offices. HP are you listening?

• Audio problem when using an HDMI cable

  I have a 2000 HP and from time to time when I connect my comp. to cable HDMI the sound only works on the computer

  not the TV and then I have problems with the sound when you play videos on the computer alone or with headphones. I have also

  getting a Web page saying that something is null and then says error message line 1530 and I have to restart for

  Let the error message.  I checked all of the updates for audio.

  Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your laptop HP 2000 and don't read does not correctly when it is attached to the TV. Only, you should be able to have the HDMI cable from the computer to your TV and try to touch the key FN and F4 for transferring the image of the computer to the TV while the HDMI cable is connected. Here's a document on solving audio problems with external speakers, headphone and HDMI audio devices.

  I hope this helps.

  Thank you

• Why don't I get sound with my HDMI cable connected to the TV?

  I have a specialist HDMI cable to connect my macbook to a monitor or a TV. I have the good picture but no sound. Which can be fixed?

  Which macbook you have and what port you connect the cable "specialised" HDMI to?

• Screen black after using the HDMI cable, but still slightly visible screen

  Hei

  I got a c850-10 X. Brand new. Used only for a week or two.

  When I connected it to my TV (LG 42') with a HDMI cable it worked fine. But when I do not use my TV as a screen of my laptop is a black screen. Now I can only use a second display as screen alone because my laptop screen is black all the time. It is not completely black, I can still see my desktop slightly behind some sort of black cloud. If I make the screen brighter, I see a little more.

  (It is not the "shear screen" or "Fn + F4" problem, my screen on the laptop is just black. No matter what I do)

  I read a few tips and tricks on the internet for this problem, and I tried the switch off, remove the load cable and remove the battery and press the power button for 30-60 seconds before I put in the battery and then restart my laptop. But still no luck.

  Why is this happening? Anyone know? What is a wire between the screen and the under part of the laptop?

  A driver problem? Tried to uninstall the driver from the Intel card, but then the screen went APE, so I reinstalled it again.

  Everything worked fine until I used my TV as a screen ekstra...

  I have an older Toshiba laptop where the same problem apperied, but this laptop has served for about 4-5 years so I thought that I just get a new...

  Post edited by: lars.hel

  When you want to use for laptop only and disconnect the switch to HDMI cable to LCD only by using the FN + F5 key combination and when you see the desktop on the screen to disconnect the HDMI cable.

• Trying to connect my laptop to an HDTV using an HDMI cable. Error I get is "signal".

  I use window Vista on my laptop. I'm trying to connect my laptop to my HDTV. I connected the two with a HDMI cable. The error I get on the TV screen is 'signal '. Is there some settings that need to be changed?

  All imput would be appreciated.

  Kite_99

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• The U2412M will operate using a HDMI cable to DVI?

  Hello

  I am struggling to find a definitive answer to this question. I'm in the market for a new monitor and Dell U2412M seems perfect for my needs.

  I use a Compaq CQ61 laptop at work which has an ATI Mobility Radeon HD4200 with outputs HDMI and VGA graphics card. I am aware that VGA is less than digital connections, so I would like to connect the monitor using HDMI output from my laptop via HDMI > cable DVI to DVI - D monitor entry. I came across online discussions indicating that HDMI is limited at 1920 x 1080 on most devices, so I hesitate to buy the U2412M if I'm not going to get maximum performance. Other discussions claim that it's all nonsense and manufacturers do not know what they are talking about.

  A HDMI to DVI - D cable dual link (like this http://www.ebuyer.com/130513-xenta-gold-plated-hdmi-to-dvi-d-dual-link-cable-black-2m-plex-034) connect the monitor to my laptop HDMI output and display the full resolution of 1920 x 1200?

  For all of you who may wonder that in the future, I just got my U2412M as a double link base (don't know if it's important but it's better safe than sorry) dvi to hdmi cable from amazon and my laptop instantly recognized the monitor to complete resolution of 1920 x 1200, despite the specifications of manufacturers for my graphics card indicating that the hdmi output has a resolution of 1080 max , so the rumors are true - the manufacturers specifications can only be invoked!

  The screen is fantastic, thank you!

• How to make sound to play through my headphones and not my TV when you use an HDMI cable to extend my desktop?

  Often, I connect my laptop to my TV to extend my desktop and find work more quickly. Today, I wanted to listen to music then I worked, but did not want to disturb others in the House with the sound so I plugged my headphones on my laptop but the sound plays through television. How can I get it to play through my headphones only?

  I do not use HDMI but audio HDMI runs your graphics instead of the audio chip

  the laptop, so I think that you can turn off the HDMI audio in your graphics cards

  The control panel settings.

  -If not, you should be able to disable the HDMI audio via Device Manager.

  The HDMI audio will probably be known as your graphics (Nvidia, AMD or Intel).

  [Type Device Manager in the search bar on the Start Menu and select - sound, video and game controllers.] R / click on the appropriate audio device and select disable. ]

  Or - connect your headphones to the TV should turn off the sound from the speakers.

  You can purchase an extension for headphones, if necessary.

• When you use an HDMI cable to watch movies on the tv I have no sound on the TV, but have sound on the ideas of laptop.any

  Has stopped working when I tried to update DFX audio enhancer that have not installed the driver and lost all the audio outputs. Uninstalled DFX and used problem checker who restored the audio, but not the HDMI taken even if I get the image on the TV but no sound.

  You don't say what version of Windows you use, but try to make sure that you have selected as default playback device here HDMI:

  Start--> Contol Panel-> Sound-> playback tab

  If you have Windows Vista or Windows 7.

  If you post back please tell us your version of Windows.