medata import using SQLFILE. table created but not shown in dba_segments

Similar Questions

• Why can I play a WMV video that I created, but not import it into Windows Movie Maker?

  Why do I get the error message "the file * *.wmv cannot be imported because the codec required to play the file is not installed on your computer." If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. "even if I CAN play the video in Windows Media Player?

  I have a Windows Media Video file I recorded using another program. I can open the video and watch it in Windows Media Player, but when I try to import into Windows Movie Maker (as I did with the other videos I recorded), I get a message saying that it cannot be imported "because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. "I tried to close Windows Movie Maker and reopening, she even tried to restart my computer, but it still does not work.

  Hello

  ·         What program did you use for recording to WMV file?

  ·         Are you having similar problem when you try to import the WMV file, which is not recorded by this program?

  Method 1:

  Although you can play a file in Microsoft Windows Media Player, you may not be able to import the file into Windows Movie Maker even though this article lists this kind of file. You will not be able to import the file if the codec that was used to encode the audio or video is not a codec that is supplied with Windows. In this case, you can re - encode the video or audio by using Windows Media Encoder, and then import the video or audio.

  To download the Windows Media Encoder, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/download/en/details.aspx?ID=8509

  http://www.Microsoft.com/download/en/search.aspx?q=Windows%20Media%20Encoder

  See also:

  Importing files into Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  Method 2:

   

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Disable the menu bar, the option apears in my Firefox 3.6 X using Windows XP SP3, but not in the same version with Ubuntu 10.04

  With the help of dual boot OS, Windows XP SP3 / Ubuntu 10.04. Even Firefox v3.16.13. In windows, using the button display in the menu bar, I can't turn off the menu bar. You use Ubuntu, the same option is available in "display".
  I used "subject: Config" before, but I'm very careful and document all changes. Any time I need to access the menu items, using windows, I just use alt = _.

  In versions of Firefox 3.6 you can hide the bar of menus under Windows and not Linux. In Firefox 4 beta current versions you can hide the Menu bar and have the greyish Firefox button instead and use F10 to temporarily show the Menu bar, so you need to wait or try the beta version .

• Nikon D810 import in Lightroom 5.7 but not in Ligthroom 6.1

  After much research, I have not found a way to import my D810 raw in Lightroom 6.1. Yet, on the same computer, I realized that I can import them without any problem in Lightroom 5.7...

  I've noticed that 5.7 using the camera 8.7 gross and 6.1 uses a camera raw 9.1. Could be the source of the problem?

  Should I install a camera raw 8.7 on my lightroom 6.1? Moreover, how could I do.

  Anyone have a simple solution for me to import my D810 directly into lightroom 6.1?

  PS. I'm running it on an iMac end of 2013, OS 10.11 El Capitan

  Cheers!

  You have not explained what happens when you try to import using Lightroom 6. So please explain. What do you see? What is going on? What is the exact error message from verbatim verbatim?

• Lightroom 5 import question - created but not seen image files

  I recently imported images of several cards in LR 5 and had imported them into folders by date and whenever I imported, I saw the pictures.  When we recently connected the drive I saw dated records but there is no images in these files.  They are lost forever, or they are hidden somewhere?  When you look at the drive through the viewfinder, it shows the folders are empty...

  TIA!

  Hi colleenzam,

  Please try and get these images in Lightroom topic of all photographs.

  Images should be copied in different folder, but it should it in Lightroom.

  Kind regards

  Mohit

• My office is hung up, but I can still use the start menu, but not all of the icons on my desktop. Internet Explorer and Google hang whenever I use them

  I'm really tired of my office when I hung up, I have windows 7, plenty of ram, plenty of space, I do regular maintenance, but this is really starting to annoy me.  I am not a novice, I used since before computers that windows was invented, and I am very appreciative of the responses that will prevent this.

  Hello

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Peformance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Firefox drops letters when using Franklin Gothic times, but not Safari

  I bought the web version of Franklin Gothic Book, Medium and half of MyFont - and began to use them in my new site in development.

  We hit a few problems that brought me to re-examine the whole issue - unless we help to accomplish:

  Problem 1 - Firefox drops several letters/characters and is therefore no use to me at all as it is.

  The problem does not occur in Safari.

  Problem 2 - police seems poor at 20px size - in any browser on Windows XP - see attached 3

  I would really like the fonts on my new site - and was not anticipating any problems having in mind the fonts of the advertising on the sites has been doing in the past 12 months. However, I may need to ask for my money back, unless we can get this version of Franklin Gothic Book, Medium and a half at work.

  Screenshots and URLs available on request

  It is a problem with the police.

  The police has the ligature characters removed, but ligature tables are still there. MyFonts says that you should be able to regenerate the police with the full character set:

  You should be able to log into your account, go to "Your order history", select the appropriate purchase, then select "time Kit Builder', just to the right of 'Easy' and 'Office police downloads '. If you click on the sample of fonts (the quick brown fox), you will see the advanced character options. Please choose to keep the pattern of open Type (all the characters will be automatically selected) and download the file. (If this option is available for your font, you will want to choose the police under "Webfonts" available on the page 'Time Kit Builder', then, under 'Webfonts selected-> OpenType layout', check the option 'keep all available OpenType.'.) ***

  If the problem persists, or if you are unable to regenerate the time and that you only need to support Firefox 4 +, you can work around the problem by adding - moz-font-feature-settings: "calt = 0, liga = 0; to your @font-face.

  If you need also to support Firefox 3.6, you can use text-rendering: optimizeSpeed; as an alternative.

  Thanks to Ted Mielczarek and Jonathan Kew for troubleshooting assistance.

• Using the page curl but not effect page navigation icons

  I want to create an online magazine where the page curl is available.

  It works very well.

  I also want to add navigation to page down icons so that users can edit pages.

  The problem is that page icons are part of the effect of curvature of page.

  Is it possible to use the hemmed page and do not make the icons on page?

  You mean like this:

  http://www.edocker.com/_demo/edocker-online-demo/index.html

  I m afraid can´t you place your navigation out of the page using InDesign area only. I think it was possible in InDesign CS4 but changed when CS5 is out.

  With CS5 or CS5.5 you only option is to use solutions like eDocker third 3rd...

• Use of the model, but not on all pages

  Hello - new user DW CS5.   I have a built site where I created my first page with banner, header, footer menu sidebar graphic using the DIVs.  There is a #content box (editable) where my variable text/graphics to send in.  I then turned this skeleton in a backup model and built the rest of the pages out of the model.  I can't believe how easy it was and it works.

  But how to establish a "selective model area.  What does this mean?  OK, I have a subsection (who are we) where we give a little bio and photo on the staff members each on their own sub-sub-page.  This DIV I need to define an area of model where I provide links to the other members of the staff member - < a href... >, but I don't want this box on every page of the site, just the subpages describing members of the staff.  Of course - I could copy and paste from one page to many but I know good design, you do not want to enter in repeat code this way because it's 'dirty' and difficult to follow in the future.  In my studies, I ran across this so I know to avoid.

  And so, because I have little training, I'll ask if anyone has a couple of pointers to allow this kind of behavior - have a text/chart area (model?) that may apply to the selective pages I want?

  Thank you.

  Hoib

  Please do!

• distortion sound when using the media player but not any other media suite e.g., be able to go

  I have a new samsung 305th and sound playback for the media player is distorted on the helmet and built in speaker, but all the others like suite of media and power go her crystal clear. makes all kinds of settings and checked sound card, what is the problem? Fix, it has found a problem but says to contact the manufacturer.

  Hello

  1. what fixit did you run?
  2 were there any hardware or software changes made on the computer before this problem?

  Carry out the methods to solve the problem.

  Method 1
  Run the troubleshooting windows media player setting and check if the problem persists. Follow the steps described in the following link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Method 2

  Try disabling audio enhancements and check if that helps.

  (a) open her by clicking the Start button, then Control Panel. In the search box, type sound, and then click sound.

  (b) on the playback tab, click speakers, and then click Properties.

  (c) click the enhancements tab, and then select the checkbox disable all improvements .

  If you do not see the enhancements tab in the speakers properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.

  Also remove the audio codec in Windows Media Player.

  (a) open windows media player, and then press Alt key.

  (b) click on Tools, select plug-in and click on the option.

  (c) select plug-ins tab, and then under category, click Audio DSP.

  (d), select all the files in the DSP Audio box and click Remove.

   

  Method 3: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See the help article
  Tips for solving common audio problems.
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue.

• How can we do the invisible table cells (but not content) in DW CS5?

  How can you efficiently convert the table cells in invisible ones so that the content within these cells gets stand alone, visibility-wise, please?  I looked at so many different orders of Dreamweaver CS-5, but none seem to do the trick, at least do not apparently potentially compromising the existing content somehow.  Any thoughts, please?

  Change

  BORDER CELLPADDING = "0".

  TO

  BORDER = "0".

  See what for you.

  Gary

• I use thunderbird and firefox but not be able to get support. My credentials are not recognized.

  I have been using Thunderbird and Firefox for more than 12 months and at that moment there registered for Mozilla Support. Several times during this period, I tried to connect to the Support without success due to 'details' unrecognized and as advised, my email address has been sent, so that a new password can be generated. Each time, Mozilla responded by saying that a link of e-mail had been sent to me to generate a new password. I have never received such an email from Mozilla, so I've never been able to access the media.
  I guess that the apparent success today is maybe because of me go a different route to get a valuable source of information. I hope that is correct and have no role in «good luck»

  Well, you're here now. I have never had such problems myself so it is difficult to know what to say about the difficulties that you had.

  And then, what kind of help are you looking for?

• can connect by using the ip address, but not by using web address settings?

  Try to connect to the internet using access point mobile Windows 7 Firefox browser.
  I can access a Web site by using the ip address using however nothing www.msn.com or whatever it is.
  In the connection to the internet in Network Options window that I have no idea of what to put in there, I have tried auto that nothing works

  (hit the uppercase text - c)

  There servers DNS Setup correctly?

  • http://KB.mozillazine.org/Error_loading_websites#DNS

• The slider has stopped being able to open previous tabs. I can go back in a tab using the keyboard commands, but not there mouse.

  Without my change all settings, mouse ceased to be able to open previous tabs. They become locked. I can go back to a previous tab using keyboard commands. Why is this happening? How can I find the power to the mouse?

  You can try to find the real cause. Safe mode disables installed Extensions, themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. All these adjustments can be also enabled/disabled/changed manually to isolate the cause after exit safe mode and start Firefox normally.

• Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

  I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

  Hello
   
   
  I would like to ask you a few more things.
  1. how many network connections you have created?
  2. are there multiple NICs installed on the computer?
   
   
  Since this is a common problem and many users have solved this problem by using different methods.
   
  This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
   
  As the article below also indicates that there could be multiple reasons for the same.
  The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
  http://support.Microsoft.com/kb/945925
   
   
  Method 1.
  I ask you to remove any network connection if you have created and then check.
   
   
  Method 2.
  For control please check in mode safe mode with Networking if the problem exists.
  Here's how:

  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.