Recovery facility does not

Similar Questions

• Recovery facility does not engage on Satellite L850D

  Hello

  as my PC still locked after 10 minutes (surfing on the net, use of Ms office,...) Finally, I decided to reinstall Windows and made a record of recovery facility. Indeed, remove all software (office, Chrome,...) and reinstall it did not solve anything
  I reinstalled and noted installation was indeed very slow (hours) until he stopped at stage 47 of 47. Wait again for if long step 47 in the end, he didn't move at all.

  I rebooted, and then asked for an administrator password to WIndows7. How can I know, I didn't create any user.

  Then I restarted in safe mode, where I could create a user with administrator rights (if did not create a password for it)
  Then I could log on, but he again immediately on screen Toshiba Leading Innovation above windows again stuck again at stage 47/47. No movement at all new.

  So I decided to lower-level security the lowest level regarding ' when the software is installed you are not asked to leave.
  Indeed, the stage 47, then ends.
  But then, I get another step of the installation with the comment "of worden systeemprestaties nu geclassificeerd. It's the Dutch version, which means "Systemprestations are now classified."
  I am progressing a little, but after about 10 seconds, it stops and the progress bar does not continue. Automatically restarts windows and sometimes not help waiting hours. He leaves with execution step 47 of 47, going back to "Systemprestations are now classified", but always stucks there yet.

  I don't really see a solution, please help me.

  As Windows 7 is pre-installed, I have no CD/DVD official WIndows7 and cannot rely on the Toshiba recovery tools.
  I would expect Toshiba Recovery does all the work...

  Even if you are not a professional IT guy, the recovery process is not really complicated...

  Usually, you must boot from the recovery disk and have to follow the instructions on the screen... that's all...

  I also got my two laptops Toshiba repeatedly and never questions had mentioned in your message... in similar cases, I recommend always repeat the recovery procedure or check the hardware parts; for example the HARD drive...

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• Portege M200 recovery process does not work

  I want to re format my old M200 of 4 years using the original recovery disks (4).
  The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

  My C drive is NTFS, and the recovery process does not work.
  I'm unable to find any other documents or files on the drives to advise me what to do help.

  I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

  NTFS.

  May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

  How have you tried to recover the laptop?
  Have you tried to boot from the CD?

• Recovery CD does not completely load.

  I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

  Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

• ENVY 15 3040 nr recovery disc does not

  Hello

  I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

  The system recovery media does not support this computer.

  You are not able to restore the system with the media.

  0110 A9P60UA #ABA - A9P58UA #ABA

  Help, please!

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• My recovery CD does not work and will not install my genuine copy of Windows XP.

  XP Home Edition.

  I bought a computer acer laptop, which came with a pre loaded windows XP Home Edition. As I had to format the laptop for some reason, I used a pirated version of XP.  Now, I want to install the original version. I have the product key. My recovery CD does not work, because I had used the pirated version.  Pls help...

  You need to start using the CD - no existing OS - and install it to clean.

  It will wipe your drive first, back up your data on an external support.

• HP Pavilion g6-1278sa recovery partition does not

  Recovery partition does not work after the creation of new partitions. Where can I get the restore CD?

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Recovery Manager does not recognize a flash drive

  Well, this is my second attempt to create recovery media, initially I thought the drive was defective and returned. I would go to 8.1 but would create recovery first. Recovery creator does not recognize the cross (SanDick Cruzer 16 GB) flash drive the forums and google around and have not really found a solution. Help please? Must I resort to buying discs for this purpose? I don't see any mention of this player being Win 8 compatible.  PC is the new HP Envy 1430. THX...

  natrldsastr wrote:

  I said in my initial inquiry, I can't find any compatible 'Win 8' claim for this device. The packaging claims to be compatible by the bias of Win 7, but no mention of 8. I knew it was a problem and had checked. Regardless, this disc is useless for the recovery of the system. Thanks for your time.

  Hello! Looks like you have a couple of choices for me. Use a PNY flash. Create an image of your operating system with a third-party App or get some DVD high quality. I agree that the drive is useless for the recovery of the system. I've seen your problem before on other forums and other products. I do not have the answer.

  Dokie!

  PS Perhaps SanDisk has a?

• MY RECOVERY MEDIA DOES NOT DV6-3170EE

  Hello, I have a HP Pavilion dv6 - 3170ee Entertainment Notebook PC Core I7, drive HARD 500, Ram 4

  I had a problem while I was trying to find my laptop. one of the brackets 5 recovery DVD does not work anymore. can someone help me find online recovery support please.

  Thank you.

  I'm looking for recovery media. Use the following URL.

  http://support.HP.com/us-en/document/bph07143

  I highly recommend that you order a usb instead of a disk set support. USB support is, unlike DVDs, very durable.

• Data Recovery Advisor does not work

  In our environment of RAC DB 12 c Data Recovery Advisor does not work? Why?

  The Data Recovery Advisor is only supported by ORACLE DB Single Instance!

  https://docs.Oracle.com/CD/E60665_01/db121/BRADV/rcmrepai.htm#BRADV246

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Win 7 64 bit HP recovery CD does not work

  Hi all

  I ordered the HP Windows 7 64 bit recovery CD and it doesn't work.

  When it separates partitions, and it displays its progress as usual for example

  1/7 full
  2/7 full
  3/7 full (files copied etc..)

  but around 3/7 or 4/7, the sound of the CD in road changes and it seems that it restarts continually.

  I am confident that the problem is related to this CD because the other disks work properly and the 32-bit recovery CD, I had with laptop computer reinstalled Windows very well.

  I wonder what could happen? I have contacted the company on this topic and am waiting to hear. I see no damage to the evidence on the record, and I take great care in general. All I know is it does not work. Any ideas?

  Thank you

  > I ordered the HP Windows 7 64 bit recovery CD and it doesn't work.
  What do you want with a HP recovery disk?
  If you have a Toshiba laptop, then you must use a recovery disk Toshiba