method of machine utiliboard connection not available

Similar Questions

• Remote Assistance error: "Easy connect, not available.

  Original title: easy Remote Assistance connect will not work

  I have 2 systems of windows 7 on a local network using Qwest PK5000 modem-router.  Both systems are connected via the home network and share files between them very well and there is only 1 active network.

  If I run the MSRA command on the 64-bit computer and select easily connect using the option "help somebody", the system displays the security code for the other system to use or "invite".

  On the 32-bit machine when I try either options it goes to the "easy connect, not available.  Network Diagnostics has found no problem, but if I try to access the Internet connectivity evaluation tool I can't in the tool.  It says at the bottom "IE6 is required" and nothing happens.   So I don't know if the PK5000 was the Peer Name Resolution Protocol on it or not.  Qwest or Actiontec will not respond to the request.  I guess it's OK if the 64, but the machine would not immediately come with the password to use on the other machine.  The command ipconfig/all look the same on both machines. Furthermore, both systems are (Inspiron 580) and DELL (XPS 420).

  Please give me more advice on this problem.

  Problem solved!

  Downloaded "Teamviewer.exe www.teamviewer.com.  It is a product of superior quality on remote assistance and is free for non-commercial use and it works great both ways. And it allows control over the other system instead of simply consider.

• Photosmart Plus B209 wireless connection not available

  Hello

  I just got a new Photosmart Plus B209 because my old 4580 died. I had the old printer put in place for the wireless connection, but the new Photosmart told me that the network is unavailable. When I press help he told me to make sure that there is no connection and to check for interference. Well, there are none. Printer and router are almost side by side. I used the HP set up guide and he tells me that the network is not available (which it isn't because otherwise I wouldn't be able to write this online).

  I use a MacBook with a Timecapsule 10.5.8 and a cable modem D-link.

  Yes, the workaround is a bit tedious, but it works.  If you have another router (standard), we all connect to one and use WPS.

  In any case, let's try this:

  1. on the front of the printer: Setup > Wireless > default settings.

  2. on your look of computer for a wireless called "hpsetup".  Connect you to it.

  3. print a network Test Wireless in the menu of the wireless printer.  Get the IP address of the printer.

  4. type the IP address of the printer in the web browser address bar.  You should see the page in the printer settings.

  5. click on the network tab, and then start the wireless configuration wizard.  Follow the instructions.

  6. when the printer is connected to your wifi, re - connect your computer to your wifi and add the printer in system preferences > print & scan (click the sign '+' to add the printer).

• VSAN 6.2 'method of fault tolerance' is not available

  Hello

  I installed 4 6, 0u2 ESXi hosts, each equipped with 3 flash devices and a VCVA 6.0U2

  I built the VSAN cluster without activating dedup and compression.

  But when I try to build a raid5 storage strategy, I can't find the parameter of the method of fault tolerance to allow coding of erasure with RAID5,

  I found the after fault tolerance method parameter enabled dedup and compression.

  Is this good?

  It's surprising. I have 60U2 basic vsan cluster where I am able to see 'Method of fault tolerance' the two option of raid 0 and raid 5/6 without activation of compression and deduplication.

  Can you confirm that you have all the flash disk group when you tried this option

  You can logout/login to the webclient service and check if you are able to see (there is a known, documented problem where some of the policies will not be visible unless you disconnect/connect back to the user interface)

  Was it installed or upgraded charges. If you upgrade, you did the upgrade of the disk version. I think that features will not appear if the upgrades of the disc are not (and automatically activating dedup/compression is an upgrade of the disk)

• Wireless connection not available in CP?

  Hello

  I apologize in advance for asking, but I can't find an answer in the knowledge base.

  I did a clean install on a new HD in Win7x64. The old HD was Win7x32, and I have been trading in and out of the connector on the drive C: to perform troubleshooting and other tasks. The old HD OS connects to the internet via my router wireless without fault (that is, there is no hardware problem). I can also open the tab "set up a new connection" / "connect to the internet" and find choices both broadband and wireless. However, in the new installation of the OS, I find that the option high speed. I have updated the adapter wireless for the same driver & rebooted without change. What else might work?

  Solution:

  There is no wireless adapters installed - only wireless device controller. After downloading & installation original owner Lenovo WLAN adapt, it worked. No idea why Win7x64 includes not an adapter, what with thousands of functions, programs and updates - appears as a FAIRLY BASIC ELEMENT, since you can't do any update or troubleshoot offline more. And no clue as to what's missing...: /

• Internet connection not available. Need Ethernet drivers. Reinstalled Windows XP on the Windows Vista-based computer.

  Original title: Install Ethernet drivers after installing Windows Xp Home Edition Version 2002 Service Pack 2

  I have a laptop Gateway that used to have VIsta on it, but recently, I put Windows Xp Home Edition Version 2002 Service Pack 2 on it and everythings works perfectly, but now I can't Conenct to the Internet it show no connections and I need the drivers for the Internet if anyone can help me please would appreciate it thanks :)

  Hello

  What is the model number of the computer?

  I suggest you to contact the computer manufacturer site and download Ethernet drivers for the Windows XP operating system.

  You can go to the following website, and then click the Select a product model , then select the model of the computer to download drivers Ethernet, transfer these drivers on his computer using a flash drive and then install.

  Here is the link: http://support.gateway.com/product/?cmpid=supportnav

  You can also see the following article for more information.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  
  

• new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

  Two hp 17-inch workstations mobile (business) Z book 17

  On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

  On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  Here is the new mobile workstations HP Z book 17.

  Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

  HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

  These two mobile workstations have problems of USB port with all the ports on each computer?

  These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

  What does do to be able to back up files on a disk external hard drive internal?

  Have to do to be able to use flash dirves with a 17 mobile workstation z book?

  This problem has been resolved.

  The book of Z 17 HP installed their software: HP Client Security.

  This software prevents the use of external hard drives and flash drives in its default settings.

  Each customer is on their own in discoverinv and the resolution of this problem.

  There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

  The way in which this issue has been resolved was by a clean boot process in msconfig.

  When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

  Whenever the hard drive or flash drive has been verified.

  We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

  This consumes a lot of time and was so frustrating.

  On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

  HP did wrong by not providing any information on the inside of this product the HP support assistant.

  Here's a consumer might encounter problems:

  The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

  After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

  It is the customer of HP security information:
  
  http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

  There was no information to reconfigure the software in the white paper.

  I was able to find a user guide.

  This guide was not and was not available through the HP support assistant:

  http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

  Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

  The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

  So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

• My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available.

  My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available. How can I permanently?

  Hello

  1. who is the operating system installed on your computer?

  2. are you using a cable or a wireless Internet connection?

  3. were there any changes or updates made on the computer?

  4. what store did you try?

  Follow the steps mentioned below and check.

  Method 1: I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can try resetting WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.

  a. Click Start and in the search box, type cmd.

  b. right click on command prompt, select "Run as Administrator" to open a command prompt.

  c. at the command prompt, type the following commands:

  netsh winsock reset catalog, which resets the WINSOCK entries to the default installation

  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation

  netsh int ipv6 reset reset.log resets the IPv6 TCP/IP stack by default installation

  d. restart the computer.

  Method 3:

  Reset the default router by pressing the reset for 15 seconds with power button.

  a. turn off the modem, the router and the computer.

  b. connect the modem to the WAN/Internet port on the router.

  c. connect the computer to one of the router's LAN/network ports.

  d. turn on the modem, wait for triggering connect light.

  e. turn on the router, wait two minutes.

  f. start the computer.

  g. when the computer is completely loaded, check if the problem persists.

• How can I keep a connectivity when the DNS server is not available?

  We have remote locations with several computers that are joined to our domain via a gateway to gateway VPN. When VPN breaks down, they lose the connection to our CD/DNS server. Their ip addresses remain the same, since they are managed by their local router but they failed to connect to other devices to their location even though the devices have static IP addresses. If I understand the use of the LMhosts file must allow me to allow them to keep local communications between computers. I think the entry in LMHOSTS should be like this for each local machine they need to access.

  10.0.0.1 SampleEntry #PRE
  Is there a better way to solve this problem, however?

  Hi Jim,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with connectivity indomain computers when the DNS server is not available.

  As the computer is connected to the domain network, the question you posted would be better suited in the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Bank accounts is not available. connection icons does not

  Bank accounts is not available. connection icons does not

  Hello

  Thanks for the above information.

  1 have you tried the methods mentioned in the post above?

  I suggest you try the steps from the link below.

  You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444

  Registry warning

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://support.microsoft.com/kb/322756/ )

  If the problem persists then I suggest you contact with the support of Barclaycard from the link below.

  http://www.Barclaycard.co.UK/personal/contact-us

  Hope this information is useful.

• Mapped drives are not available. Machines inaccessible area. Can ping from command prompt.

  Hello

  Working in a Windows domain.  Have a 150 machines in the field.  Now, a single machine seems to have lost the authority to communicate.  This machine was a member of the domain for more than a year and has gained access to these places and several times of the mapped drives.  It's a user's machine, so not sure what may happen before this started.

  At the moment the machine is connected to the network.  I can browse internet fine (internet accessed through the default gateway).  At the command prompt I can ping machines on the domain by ip or name.  Both work very well.

  Can I use remote desktop to connect to other computers on the domain.

  What I can't see all the drives mapped or access the domain computers via Windows Explorer.  When I try to access a mapped drive (accessible by everyone) I gat an error message.  "The location is not available.

  When I try to select a machine in the field of windows Explorer I get 'open folder '.  \\XXXXX is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The specified network provider name is invalid.

  Tried this as multiple users.  Not the specific profile.  Tried under the Domain Admin and get the same error.

  Search error messages and found many solutions.  None worked.

  1 - removed from the field and joined.

  2 - disabled and enabled network card.

  3. cannot remove adapter, laptop.

  4 - withdrawn from the area, has changed its name, joined.

  5. deleted and added customer network Ms.

  6 checked svc of workstation was running.

  7 disabled the Windows Firewall.

  8. multiple antivirus scans run.

  9 - set network security: LAN authentication level manager' to 'Send LM and NTLM responses &'.»

  Any ideas?

  Thank you

  Found.  Want to share others.

  It was she.

  http://support.Microsoft.com/kb/170336/en-us

  The network logon order had disappeared.  Replaced by exporting from another machine.

• Not connected. Connections are available. I am connected to the internet but, and all this shows is gray bars with the yellow connection star on them.

  I am connected to the internet, but it is said in the toolbar not connected and connections are available. There is only 1 link and I'm connected to it. How can I change display green bars, instead of grey bars with a yellow star?

  As the title says.
  It's weird, and I think that this is the reason why some of my programs connect properly?
  Does anyone have a solution to fix this problem?

  Hi DamienDwyer,

  1. are you referring to the status of job internet bar?
  2 when the problem started?
  3. have you made changes on the computer recently?

  Method 1
  Try troubleshooting of network running.

  Use Network Troubleshooter event logs to solve network problems
  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 2
  check the status in safe mode with network and display the results.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3
  I suggest you try the steps from the following links:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

  I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

  Hello

  1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

  2 have you made changes on the computer before this problem?

  I ask through the following article to find out how to set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  After completing the above links persist issue please fallow the mentioned below of the methods.

  Method 1: Disable UAC (User Account Control) and check the result
  See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Important: Enable UAC after you complete the steps.

  Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

  Hope the above information is helpful.