Mgr. device Showed monitor, MS Installer errors, Photosmart C-20 aircraft photo/Scanner, pre-Win95?

Similar Questions

• Photosmart C5180 Installation ERROR - Windows 7 64-bit - system cannot find the file hpzprI40.exe

  Photosmart C5180 all-in-One

  During the installation:

  C:\Users\Test\AppData\Local\Temp\7zS1DB2\Setup\...\hpzdrI40.exe - m...

  The system cannot find the specified file.

  I clicked OK, then came next to the top:

  Error Situation code: 06768865

  The following lines were extracted from installation error logs.

  + Launching 0000000000001246128\s\Now = X:\hpzprI40.exe m

  preloadiceenginetoguidfolder-* "X:\autorun.inf" - nosplash - checkPath

  XXX-1-f "X:\hpoins18.dat" "-number validate dat"-No. validate "

  Found source file: X:\hpzsetup.exe

  VerifyFilesNoDecompression() failed with the system cannot find the specified file.

  Exit code = 2

  H E L P!  I don't know what to do now.  I tried to install the downloaded file, AIO_CDS_Net_full_Win_WW_130_140 on HP site.  My operating system is Windows 7 Ultimate 64-bit.   I need to get this working today and need complete instructions on what and how to do this fix.

  mrsjeffyg, I recommend that you completely uninstall the printer from the computer. Make sure that all copies of the printer and the associated files are removed from programs and features, the Manager of devices, and the devices and printers. If you are connected with a USB cable, make sure that the cable is removed from the printer for the duration of the present.

  Click START and type "%temp%" and press ENTER. This will open the temporary folder, and I want that you delete all the files that you can here. Some will not be able to be deleted, so ignore these files.

  Restart your computer.

  Follow this link here and reinstall it from the Full_Feature Driver and software.

  http://goo.GL/0zXiT

  I would like to know how it goes!

• 10 - IOS Installation error message

  My iPhone is loaded and updated iOS are downloaded to the phone.  There are 10 GB free so space should not be a problem.

  Software update confirms 1 update to download and it is for the iOS 10.  It shows the preview of iOS 10 features etc.  When I confirm the installation, I get an error message that says: "unable to install the update. 10 iOS installation error.  Retry.  Remind me later. "  It gives no other details.

  Does anyone else have this problem?  I use the beta on my phone - do I need to uninstall the present?

  I also already backed up the phone on my computer too.

  iTunes says the phone has been updated and gives the option.

  Hi boujis, you need to put your device in recovery mode, and then click Update when you are prompted to download the public version

• printer all-in-one memory card error Photosmart C6180

  Photosmart C6180 all-in-one printer, xp computer

  When I insert a 4 GB SDHC card in the SD slot + printer and

  When I insert a SDHC 16 GB card in the SD slot +, two cases, the error "memory card error" appears on the printer screen.

  The HP digital imaging monitor displays the error "no images on the card.

  How can I correct the mistake of the printer software.

  Hello

  No, it isn't, when the device was built there were that many more 1 GB card and they were still quite expensive.

• Samsung Gravity S II - installation error: "CDC series is not installed."

  Original title: hardware device (Samsung Gravity S II

  I bought this smartphone and I tried to connect it to my computer. A message appears saying that the pilot for the series of the CDC is not installed. How can I do that I can synchronize my Galaxy S II?

  Samsung Gravity S II - installation error: "CDC series is not installed."

  You install the sync software that comes with the "phone.  The PC recognizes the "phone and the synchronization software will be running on the computer in order to allow the synchronization."

• Installation error code 0 x 80070673

  When I try to install the updates I get this error: Installation Error Code 0 x 80070673

  Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features gradually based on .NET Framework 2.0, 3.0, 3.5 and includes the cumulative upkeep updates of .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates. This combined Service Pack and update applies to versions of .NET 2.0 to 3.5.

  Help, please.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  · What is the security software installed on the computer?

  Here is a link where another user was faced with the same issue and steps suggested by securityguy14 Wednesday, December 30, 2009 12:57 AM helped solve the problem.

  Link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/a3cf9c6c-5be3-4d36-91bb-ed12dc1aa720/

  You can also check the following links: how to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation: http://support.microsoft.com/kb/906602

• Installation error 112 Setup error message when you try to install the software of the camera Kodak DC200/DC210 Zoom 1995

  Original title: initialization error 112 Setup

  1995 installed Kodak DC200/DC210 Zoom camera software.

  Explanations with the error: decompress the program files not all charges.

  Note: A message previous said that some files can not be installed at this time, because the areas have been used, and records still awaiting loading would be installed when the computer was restarted. (My phrase).

  I may not be a problem, but I don't know how I would like to know whether the error 112 was relative to the previous announcement requirement of a restart or another unrelated with error 112.

  Thank you

  Destry

  PS: You know; In appearance, it could be as silly a question as it seems... But I deal with my share of 'Error' messages, so I'll take the risk that the crazy and ask anyway.

  D.

  Hi Destry,

  1 windows operating system you are using?

  If you use Windows Vista, it seems that the Kodak camera is not compatible with Windows Vista.

  For more information, please visit the following links:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Kodak%20DC200%2f%20DC210

  http://wwwca.kodak.com/global/en/service/digCam/dc210/ownerManual/05inSf.shtml#88364

  You can try to install the device in Windows XP compatibility mode and check.

  Check out the links for more information:

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Also read the following article:

  Error 112 Setup Installation Error message"when you try to install a program

  http://support.Microsoft.com/kb/326678

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Event M18x R2 Win 8.1 Pro x 64 0, monitor SIMG Service error

  I finally decided to full wipe and a clean installation of Windows Pro 8.1 x 64. All the seeds well but every time you start (cold start or reboot), I get an error in the Windows Event Viewer '0, monitor SIMG Service error event' with the information of ' CurrentVersion = 6.3 ".»

  I have re-uploaded and re-installed the driver of high definition wireless are several times but no change.

  I never got the error under Win 8 and I'm on the victory Dell provided 8.1 x 64 driver.

  Any suggestions as to how to fix this error?

  Should I still have this driver/software?

  Problem solved.  I uninstalled the driver are thd.  My M18xR2 is not a WiDI installed card driver so do not necessary

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• Tecra R850-117: RFBus - device could not be started (error not 10)

  On my Tecra R850-117 (64-bit) Bluetooth does not work; problem seems to be RFBus;
  I tried to make the pilot, but the system answers, this is the real version.

  However, the device can not be started (error 10)
  Any tips?

  I installed also added package like the keys Fn and accessibility does not work on this "new" laptop (there is no test produt before PC out on the market?)

  Hello

  Don t try to refresh the battery BT but uninstall the battery BT the system.

  Then download the CCleaner tool. This tool cleans up the registry and removes all traces of BT of the system.

  After that restart the laptop, download the last battery BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba and install the BT are turning once more.
  Do not forget that the Fn + F8 would allow the BT Service.

• Connection Manager HP stopped responding + Windows Installer Error 1719

  I am running Windows 7 (SP1) 64-bit operating systems.
  
  Started getting an error message of connection manager HP "HP Connection Manager Service has stopped responding.  Error code 8008005.
  
  HP Connection Manager v4.1.23.1 running.
  When I try to install a new version of v4.4.10.1 (SP58930) HP connection manager, I get an error of Windows Installer 1719.  Tried different solutions recommended for this, but nothing has worked.
  
  I see in the forum after this uninstall of the current version and then install the new version of the HP connection manager can solve my original problem.
  
  Before uninstalling the currenet HP Connection Manager version, I wanted to be sure that I will be able to install the new version without encountering Error 1719.  I don't want to be in an even worse situation of not being able to the HP Connection Manager after you uninstall it.
  
  Can I get confirmation from HP that I will be able to successfully install a new version after uninstalling the current version?

  ParryJM wrote:
  

  A ran the Microsoft Fixit then tried to install it and got the Windows Installer Error 1719.

  Then uninstalled HP connection Manager.

  Tried to install the HP (SP58930) connection manager and still have the error Windows Installer 1719.

  What do you suggest I try next?

  The fact that HP Connection Manager is no longer installed, how this will affect my computer?

  The fact that it is no longer installed will have no effect on the functioning of your laptop and none on the operating system.

  HP connection manager is simply a utility assistance for people who are making it difficult for the network through conections wifi and bluetooth connections.

  If you are not in this group it is really useless.

  From your description, it seems that if you can't follow instructions in the Microsoft fixit to the letter. By using the fixit is the easiest way to remove the registry entries and make changes to the registry that will allow installing and uninstalling software.  I can't recommend the methods that I use personally when I run on these issues because they involve access to the registry via regedit. The word people have never even heard of Regedit. Using Regedit can be a very bad thing for someone not experienced in the use of the registry editor.  All ch = angels did take place immediately and which included all the mistakes made during the access to the registry. Ongoing work on an operating system can fairly easily through the registry editor. Try the Microsoft fixit. It is a safe utility. Use it after an attempt to install and leave the window open until after error that does compete with the installation of the software.

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• Installation error code: 0 x 80246008

  I get an Installation Error Code: 0 x 80246008 when I try to download the update for Windows-why?

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Auto Installer error msg when you try to install security pack 1-windows vista premium home edition

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Update of programs you have problems with Windows vista security pack 1
  • Installation error messages fails
  • Recent changes made to your computer - none
  • What you have already tried to fix the problem-read on problems - tried to use such automatic installer recommended

  Hello

  This problem may occur if one of the following conditions is true:

  ·  A program on your computer interfered with the installation of the service pack.
  ·  There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  See this article for this problem:

  How to fix the Windows Vista and Windows Server 2008 service pack installation issues:
  http://support.Microsoft.com/kb/947366

  Additional information:

  What you need to know before you install Service Pack 1:
  http://support.Microsoft.com/kb/936330

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions:
  http://support.Microsoft.com/kb/959064

  How to obtain the latest Windows Vista service pack:
  http://support.Microsoft.com/kb/935791

  I hope this helps!

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.