MIC question

Similar Questions

• G20 - Xd Picture card error & internal mic question

  Hello
  I ve bought a piture for my digital camera xd card and the qosmio g20 doesn´t now detects when I insert it on port sd/xd. The problem is that my other fujifilm xd card is detected but the Olympus doesn´t. Strange is also the fact that I tried this last card piture xd on my Toshiba Satelite laptop computer brother´s and it worked well. To check what I ve is the version of the driver is exactly the same as mine. Any suggestions? Can I update the driver? I checked for it but West only an update driver for the SD format cards and that s not here I suppose.

  And one more thing:

  Anyone know how to record with the internal mic away 60 sec? It's that when I start recording it always stop at 60 sec. I checked it s options but I can´t find anything to solve the problem. It s weird tho because when time stops to 60 sec If you click again, it will record 60 sec more for a total of 120secs. But it s not very convinient wait til 60 sec click on new to add more than 60 seconds.
  Thank you

  Hello Susana

  It is not easy to say why you have this strange problem with XD card but I think that it is not because of bad driver and assume that it can be because of multireader himself. I imagine that the Qosmio s multicard reader is somehow more sensitive and cannot make good contact to the map.

  I know it sound funny, but it is well known that a few cards (various manufacturers) can be recognized correctly. Why is it I can't explain to you at all. I know that Olympus productions of good quality, but of course your Qosmio has some problem with it.

  On the record, that I can tell you that if you want to have the right equipment registered, you must use special software to do this and not this simply given WXP sound recorder.

• Question about CTS-MIC-CLNG-G2 ceiling Mic clip pitch

  I read on sheet instructions and installation of data for CTS-MIC-CLNG-G2 ceiling microphones.  It is said that the attachments to the ceiling are not included, but I can't find any info on where to get them?

  Old ceiling microphones came with ceiling brackets generic for a model of standard grid ceiling.  Do I need source from a third party in this case?

  Looking at the installation guides of the old vs Audio Science Microphone ceiling ceiling Cisco TelePresence Microphone, he says that the ceiling brackets are not included.  However, it provides the eyelets of ceiling, if you choose to mount it on the ceiling plate itself instead of the ceiling track.

  If you do a search on google for '4 16 ceiling rail Clip' and 'Ceiling rail clip 4J15' of the Installation Guide audio science, parts B and C, you may be able to get them from a third party.

• Siri/Voice SMS/front Mic camera does not

  I filed a complaint for this March 12 in an Apple Service Center, but they said mic is stuck can not fix it and already altered sound. I told them the only person use it and no way to alter what I force gave to another authorized service center before. Subsequently called Apple Icarus and filed a complaint it there too, they spoke to the engineer senior service center and said the mic is stuck and it may not cover warranty on hardware. I asked that he be coverable because it is a hardware failure only. They said going to escalate the issue and come back. But force got no response for 3 weeks. Later while I called again they said phone is already altered so that they do not solve the problem and closed the call. The other day itself while talking, I deleted that it is not altered and they spoke to engineer main to the Apple repair center and said will degenerate to issue of Mic only but now they have changed as altered the question and say he used be coverable. And I read many people get this problem and Apple does not give the right solution for this, and many have gotten their phone replaced by a new one (https://discussions.apple.com/message/26903590#26903590, https://discussions.apple.com/message/27685992#27685992, https://discussions.apple.com/message/27734486#27734486,.. .a much more)

  Sorry, but since this is a user to user forum, there's nothing we can do on Apple decisions.

  I'm afraid, you'll have to pay to get your device fixed by Apple.

• App Pro film and Rode microphone go external mic

  Hello!

  I have a question about my newly purchased Rode Mic go. Once connected, the filmic app Pro automatically selects the external microphone rather than the internal MIC - or what I have to do something with the audio settings in filmic Pro to make sure that the external microphone get used?

  I'm confused as to if I should use either of these settings: low mic iPhone / iPhone microphone, Front / iPhone microphone, back - or none of them?

  Thanks for any advice / help!

  Concerning

  Chris

  I have an iPhone 5s and I only use wireless headphones & it works via Bluetooth. The microphone is on the right earpiece, so I'm not sure your phone showing two or more mic mic positions. And why not this app say you exactly? Seems to me a CSI must be all in one? Your phone is much more advanced, so my only advice is to those who have made an email & ask them. Here I have given the best advice. Well good luck with that.

  Sincerely,

  Mrs.Gary ☺️

• P5T15EA #ABU: (off mic and dim) function keys do not work after upgrade to Windows 10

  Hello

  After the upgrade to Windows 10, as dim and mic power function keys have stopped working. I installed all the drivers, and there is no unknown device in System Manager.

  How can I solve this problem?

  Model:

  HP ProBook 440 G3

  P5T15EA #ABU

  Hello Horiz0n,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that the function keys do not properly function on your laptop.

  Please use the link below to install the driver hotkey support to solve the problem.

  FTP://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73347.exe

  If you need to know more information refer to this Document ID: c04898039.

  Hope that answers your query.

  If you have any questions please reply back to me.

  Have a great day!

• Satellite U400 WinXP - Mic is very low

  Hello

  I have Toshiba Satellite U400 with WinXP SP3 installed. I have problem with mic volume, it is very low. I tried to turn on MicBoost option, but he's not here. Is there another way to activate micboost (regedit)?
  I have the card its Conexant HD Smart Audio 221 inside with the driver 3.47.1.0 version

  Thank you

  Hello Leah

  These questions are often set with BIOS or update the driver. At the moment is unclear to me that there is a solution for this. Sorry, but I think we must wait to see if Toshiba will offer some updates next days, or even weeks. :(

• Tecra A2 surveillance recording MIC

  Hello!

  I have a question:
  Is it possible to monitor (hear live in headphones) sound
  who is recording on my pc microphone?
  I tried several times but I failed.
  For example: I am running multitrack program.
  play a few tracks, mic is recording.
  but everything I hear these tracks, never a microphone!

  I depends on the sound card, right?
  I thought that it is called duplex full, right?
  My tecra A2 argues that, right?
  How do I activate it?

  Thanks in advance,
  Take care
  Oaks

  Hello

  As far as I know your tecra has internal mic, but you can also use an external and save the sound. You can use standard Microsoft tool (very simple and not much enforcement powerful) or even a professional recording application.

  If save you it with the Microsoft tool file will be saved as a WAV audio file. I put t find out which multitrack program, you use and which shaped this program can open and edit, but you can try to register his wish and later mix with already existing tracks.

  Sorry if I have no precise answer but you should check if you can find some similar theme or statement says maybe on the music forums or even support multi-track program page.

  Good luck!

• Satellite A200 - internal mic has background noises

  Hello

  Description: Internal microphone with full boost, and volume has background noise. By reducing its levels, it has insufficient gain to drive Skype etc, so the only viable solution is to use front mic. Have you tried several MICS known for work on the other PC.
  Logbook - sometimes when its clogged, the front mic back, is the only micro displayed, but his level is very low with settings on full boost, and volume, is hardly audible; It is not set to mute. Sometimes the settings panel shows two microphones with works front and internal as well as external. EG remove the front plate near mic and it responds.

  I am a hardware engineer and it does not appear to be linked to the defective mic connector on the front. Both the A200 is relatively new. Also, I've seen similar to this Google search topics, but no one had their similar fault solved.
  His may be a hardware problem, but given the bizarre behavior of two microphones working with trendy front in and sometimes not, it tends to suggest a driver problem. But I installed the latest driver, I could find: driver Realtek SA200-SM200-RealtekHD-6.0.1.5406-Vis64-Vis32.exe

  I do not ask questions, because it's my job to solve PC problems, but this one has really left me speechless.
  Kind regards
  Alistair.

  Post edited by: BigAlGeorge

  Hello

  Which is really strange and I can only say that my girlfriend has a Satellite A200 too but she doesn't have any problems with the internal mic. She uses the microphone for MSN and Skype, for example, but without any problems.

  In any case, have you tried with the factory settings? I mean the Windows Vista preinstalled with all the drivers and tools of Toshiba. Normally with these settings, all should properly.
  Additionally, make sure that you have installed the latest BIOS for your laptop.

  Welcome them

• Equium A100-306 have bluetooth and how do I get the mic to work?

  Hi there, please forgive stupidity but I'm new in the world of technology. Have tried to activate bluetooth for accept my mobile, but nothing helps... begins to think he had a bad impression on the box! Please help, this model has and how to operate... 2nd question...

  I need an external microphone? In-House said we could work when calls however, no one can hear me and I tried to change the settings, to be honest have no idea what I'm doing? Help me please someone... Thank you Eva *.

  I can confirm that. The laptop does not support the BT module and does not support the internal mic. If you want to use the microphone, you should use an external one. You can connect it to the external microphone jack. All that s.

  But what exactly do you do? You want to transfer images from mobile phone to laptop?
  In this case, you can use a USB cable which has been specifically designed for mobile phones to connect to the laptop or desktop PC

• How to pass life cam blue built-in to my microphne yeti mic while recording with the lifecam software?

  I guess that this is still not resolved. I read about similar posts asking how to turn off the microphone. I have my blue yeti as default and works very well in the movie was I can choose what mic like camtasia studio8, but I would like to be able to record videos using the camera but we lifecam software my blue yeti mic. the sound quality is much better... So please dear microsoft tell us how to use another microphone or get your work of programmer and set the software if we have a choice as all the other programs don't...

  I thank you for your time and hope you will fix this problem

  Sincerely of William Kayser

  Hi William,.

  Since you use LifeCam hardware and software I suggest that contact Microsoft Hardware Support.

  Please see this link to find the support option at your disposal by selecting your region.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Thank you.

  We always encourage you to use the forum if you need help or have questions about windows.

• TouchSmart 300-1122: Mic Jack works do not (a little)

  Product #: BK338AA-ABA

  Okay, so the question here. I'll try to include some pictures too. So, on the left side of my computer, it has a headphone jack and microphone jack.

  

  Low headphone plug works perfectly. I plug my TRS 3.5 mm headphones and they work. Just to show you that they are infact headphone 3.5 mm TRS:

  

  I also have a microphone (which works on all other computers in the House), which is also a 3.5 mm TRS plug:

  

  But when I plug in my microphone on taking online, I get whether audio. Is not same airship. Here is an example, with the MIC is plugged in (before ask you, yes I know my integrated is the default device, I use this show even when breath super hard directly into the microphone, without the audio is saved):

  

  Now, before asking all these stuff, yes I did all the stuff of pilot. I have done this, done that, let windows install, downloaded the default value of HP.  If you have access to new drivers, shot my way, but of all my googiling, it seems that what I have is the best that there is (photo below).

  

  Then, why is my say title (a bit)? Well, you know how to the microphones and speakers, they are a similar technology just goes different directions? Well I plugged my headphones in there, and I blew air in as hard as I could, and it actually only picked up. Don't get me wrong, it was EXTREMELY feigned (as it should be, since these are headphones being forced to act as a microphone), but nevertheless, I was able to actually record the audio from those. So for me, it means that this microphone jack has some features, but for some reason, my microphone doesn't work simply.

  So my question to you, has taken all these information? Why my microphone is not working? Require a microphone powered? Require a jacks 3.5 mm JACK instead of the 3.5 mm standard? I can assure you the microphone works. I tried it on two other computers and got her nice and crispy. I tried to open my touchsmart, but all the wires seemed to be intact. In addition, given that the headphones were able to send some audio adds as further confirmation that the connections are secure.

  If you have a look, I'm all ears. I hope that I gave you a good amount of info to work with.

  OK, so update: I thought that one way or another, something must be damaged or something. The reason why I never noticed that this entire problem was earlier because I've always used him built in mic, but after continual complaints from slightly background hum and others (as is the case with built in microphones), I decided to buy a micro cheap for my computer. AFTE, in doing so, I then learned that the outlet is not functioning little matter what I do.

  Anyway, the solution I found was to buy this Sabrent USB external adapter stereo sounds. So pretty, it is a small USB key with a sound card in that you plug in and the computer recognizes it. It costs around $7-$14 (there are other alternatives if you don't want to buy the one I listed). Simple as pie. So I plugged it, with the microphone into the mic jack. I changed some settings, because when you plug everything in, he wants to replace both your microphone AND your audio output. Which is ok, you can plug your headphones or speakers, but I wanted my computer headset, jack/speakers to work instead. Just so go into the sound settings and restore the default value for your computer speakers. (photo below) While elsewhere, you can always connect your headset on your computer and get the audio, or just listen to out of the enclosure built into the touchsmart computer.

  

  Then in the mic tab, I have the USB set as my default microphone rather than integrated like you can see on the picture below.

  

  If the USB is responsible for all the purposes of mic. In case you're wondering what mic I use, this is the one: neewer mic

  It is very cheap (even in this pack 2 it's like $5, if that $5 shipping, then maybe pair it with something else). Or if you have your own base micro little has no need power to make it work, just plug in the USB and bam you're good to go. Not the most ideal, of course, you do want to be able to solve the problem at its source, but given the difficulty has been to buy a cheap USB plug no game sound card that I could get on sale for $6 with shipping included, I'm happy.

  I wanted just to update everyone to know that it was the best I could do. Thank you all.

• Question micro

  I have the Vixia RF52 which is used to record my religious services. Internal microphone (VERY sensitve!) picks up the cough, sqweaky chairs and everthing else. What I need to know is if I plug the camers our sound system, the internal microphone is disabled? If this is not the case, can it be turned off? I looked in the manual and that you don't find the answer to any of these questions.

  I looked in the manual as well and saw nothing that made it clear that the internal MIC is turned off.  However, if it works like other Canon Camcorders with an external microphone port it should automatically turn off the internal mic.  I have a Canon VIXIA HF G20 and when I connect an external mic the internal microphone is automatically disabled.  The best way to know for sure is to try it and see what happens.  I think, based on previous experience with camcorders using external microphones, which will be automatically disabled the internal mic.

• Acer aspire ES1-111 questions

  Hi all

  I decided to enroll in this community to get some tips and reviews the problems I am experiencing with this laptop. I own an Acer Aspire ES1-111 I bought a week ago.

  Since its first configuration, I noticed problems using it with windows 8.1 (its native operating system). For example, touchpad or keyboard not working not properly and, especially, shutdown problems. In this case specific I could never stop the device correctly, because he remained with the power indicator which continued into 'works' although it seems that the system is freezed was arrested. However, in order to really stop I had to press the power button / stop.

  First of all, I decided to reset the system with built-in software eRecovery but problems remain.

  Secondly, I decided to do a clean install of the operating system and I tried the two Windows 8 and Windows 8.1. In both cases, installation process complete without problems, but when you try to install all the drivers, I experienced freezes and once again the shutdown problems. I followed an order to install drivers (Chipset first, only VGA, etc), but in most cases, I had problems of supra. I also tried to disable "Fast start (recommended) turn" without success. 

  But now comes the strange part.

  I finally decided to give it a try for Windows 7 and, to my surprise, everything works fine! I was able to install the drivers correctly and to stop or restart my laptop without a problem. Now I use Windows 7, but, as it is under warranty, I would ask you what you think of this questions.

  I find it quite strange that a laptop does not properly with its native operating system but it is very good with an older operating system! Do you think I should send to Acer support or ask to change it (although, I don't know if I'm still able to pursue this second option).

  Thanks for your attention!

  MIC

  I think I found the reason why I was unable to run Windows 8.1 smoothly after a new installation. I tried to install it during the configuration of the Bios in LEGACY mode, which is good for the BONES before Windows 8 (like Windows 7, as it was working perfectly) but not for Windows 8/8.1 as it probably some issue when install drivers etc.

  So I decided to reset the Bios original UEFI mode. It was the right decision. Not only touchpad was recognized well when loading the USB bootable (expecially since the Touchpad has been on "Advanced", which in legacy mode, would not work), but also because, when the operating system installation process has been completed, I was able to install all the drivers hardware properly and stop/restart of operations fully worked without problems / freezes and so on.

  Hope this information is useful for other users.

• MIC RDP

  Server: Windows Vista for business: workplace: XP Home > microphone connected to the server > RDPeing from xp to vista, invisible Mic in the RDP session, kindly help / provide workaround

  Server: Windows Vista for business: workplace: XP Home > microphone connected to the server > RDPeing from xp to vista, invisible Mic in the RDP session, kindly help / provide workaround

  http://superuser.com/questions/86369/sending-microphone-input-over-Remote-Desktop-7-0