Microsoft 700 V2.0 wireless receiver connect problem

When I connect the Microsoft 700 V2.0 wireless receiver, says system cannot connect to the device, the USB port has malfunctioned. Although I plugged the wireless receiver a few days back with success

Hello

1. are you able to use USB devices?
2. don't you make changes on the computer before this problem?

Try the steps of troubleshooting provided in the article below and check out them.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398

Tags: Windows

Similar Questions

  • Wireless network connection problems

    I have problems to stay connected to my wireless router.  There are 3 laptops and 2 workstations connected, but my laptop does not seem to disconnect every time my computer sleeps or is closed.  I have to go through this process to solve the problem in which the connection is immediately restored, but then disconnected and connected once again. I tried to remove the connection & restores and troubleshooting with the router, but nothing seems to solve the problem. Other computers never have this problem.  My laptop is fairly new, and I'm quite puzzled as to why he's in trouble.

    Hello

    To provide the proper resolution, I would need more information on your side.

    What is the number and the model of the laptop?

    Windows can be disable your network adapter to save power. You can try to disable the power saving option in the network adapter properties

    I suggest you try the steps to disable power saving option. Check if it helps.

    a. open network connections by clicking the Start button, and then clicking Control Panel.

    (b) in the Search box, type adapterand then, under network and sharing Center, click on view network connections.

    c. right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    d. click the Networking taband then click on configures.

    e. click on the power management , clear the checkbox allow the computer to turn off this device to save power tab and then click on OK.

    See the article for more information.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Wireless network connection problem

    Nice day

    I have a wireless network connection problem and I ask for help to resolve.
    What surprises me that this problem appeared suddenly, I used to connect to the WIFI correctly but two days ago my laptop could not connect to the WIFI and more.

    Other devices and computers connect with success so I think that the problem in my laptop.
    I don't have any changes on my laptop or windows, antivirus, drivers... updates or installed new software.
    Troubleshooting of Windows detected 'router or access point issues '.
    -Reset the router does not resolve the problem
    -Network adapter is enabled.
    -State of wireless card "working properly" and "update".

    I read a solution on this site, which was to change the properties of the wireless adapter, but the changes mentioned does not appear in the pilot of my laptop...

    * My laptop info. :
    DELL INSPIRON 3521
    Windows 7-64 bit
    Dell WIreless 1703 802.11b/g/n(5.2GHz)

    Sorry for this long to make, I appreciated all the help.
    Thanks in advance.

    Hello

    Have you tried to reset your laptop to a time before this issue started with a Windows 7 Restore Point?  If it is a parameter change or software this restore point can help solve what is at the origin of the problem.

    I'd also, of course, when you are resetting the router, to make sure that you let it sit for at least 30 seconds to a minute before plugging power back in.  You may need to do a few times to clear his memory to be able to connect.

    In addition, have updated the drivers for the wireless card?  What version of driver currently installed in the system?  You can consult our support site, enter your serial number and click on drivers & Downloads to find the driver for your wireless card.

    Finally, have you tried to empty the wireless profiles that are currently stored in your system?   If you delete the profile current wireless (which is to control your connection to the router), reboot your system, and try to reconnect Windows will rebuild the profile and hopefully allow you to log in again.

    I would like to know if any of this helps.  To help resolve this more effectively please click on my user name Dell Todd and send me a private message with the Number of Dell Service from your system.  Please keep all troubleshooting and discussions on this thread open so that others can find the information they need to solve their problems.

    Todd

  • Wireless Internet connection problems

    Windows Vista Edition Family Premium 2007

    Studio XPS 1640

    CPU: Intel (r) Core (RM) Duo

    2.40 GHz

    4.00 GB

    64 bit

    I've had my computer for almost three years now and during that time, most of the parties on this matter have been replaced.

    More recently, I got both my hard drive and my card wireless replaced due to different problems and now it has developed recently that I can not connect to wireless internet. I live with my best friend, who also has a Dell laptop and I myself own an Acer Netbook and an iPhone, both of which successfully connect to wireless internet. It seems that my system that is having this problem.

    I spoke with representatives of Dell's Support more + 5 times and nothing has solved this problem. They simply tell me it's a software problem and I have to buy something System Repair for $100 + (even after having spend $600 on a warranty, which apparently doesn't cover that material).

    Obviously, I can connect to via an ethernet/cable connection, but not wireless. It's not that the connection is not displayed, it shows and said it connects, but I only have 'Local' go. This isn't the first problem I've had with my wireless; I got other errors such as: "the ability of this network adapter does not match the requirements of this network" or the connection will show, but that their will to be greyed out as if I don't get any kind of connectivity.

    If there is more information that I can give to make this easier to understand, please let me know. I'll post the Windows IP Configuration if necessary to help solve this problem.

    Short version:

    -New hard drive

    -New wireless card

    -New router

    -Other appliances in the House a wireless connection

    -Local only access

    -With the help of Google Chrome

    -No internet access

    "It may be a problem with one or more network adapters on this computer."

    "the ability of your network adapter does not match the requirements of this network.

    ==x==
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
    C:\Users\Vicki>ipconfig/all
    Windows IP configuration
    Name of the host...: Vicki-PC
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.
    Wireless network connection Wireless LAN adapter:
    The connection-specific DNS suffix. :
    ... Description: Intel(r) WiFi Link 5300 AGN
    Physical address.... : 00-21-6A-CB-2A-DC
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::6495:af89:6369:a83b % 14 (Preferred)
    Autoconfiguration IPv4 address. . : 169.254.168.59 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    DHCPv6 IOOKING...: 234889578
    DHCPv6 DUID customer...: 00-01-00-01-15-92-53-F6-00-26-B9-25-26-60
    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP...: enabled
    Ethernet connection to the Local network card:
    The connection-specific DNS suffix. :
    ... Description: Broadcom NetLink (TM) gigabit Ethernet
    Physical address.... : 00-26-B9-25-26-60
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: b 35 fe80::cdfc:8: a699:3f1% 11 (Preferred)
    IPv4 address: 192.168.0.8 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Thursday, June 30, 2011 23:21:38
    End of the lease...: Saturday, July 2, 2011 12:06:18 AM
    ... Default gateway. : 192.168.0.1.
    DHCP server...: 192.168.0.1.
    DHCPv6 IOOKING...: 251668153
    DHCPv6 DUID customer...: 00-01-00-01-15-92-53-F6-00-26-B9-25-26-60
    DNS servers...: 192.168.0.1.
    NetBIOS over TCP/IP...: enabled
    Tunnel adapter isatap. {288F80BF-48FA-41D6-AA1F-0CE0A55ECA0F}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Local Area Connection * 7:
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 02-00-54-55-4E-01
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address...
    . : 2001:0:4137:9e76:146f:34 has 2: 3f57:fff7 (Pref
    made a mistake)
    Address IPv6 local link...: fe80::146f:34 has 2: 3f57:fff7% 10 (Preferred)
    ... Default gateway. : ::
    NetBIOS over TCP/IP...: disabled
    Tunnel adapter isatap. {7CDECA56-C37F-4889-AEB0-5587199FDF00}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #2
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    C:\Users\Vicki >
    C:\Users\Vicki >

    Hello

    Since the update of the driver did not work I would return the system back to factory
    as suggested in my response above. After the revision updated the WiFi driver again. If this
    does not work then it's material. If necessary, you can disable the built-in WiFi and
    use a device of WiFi add-on.

    I hope this helps.

  • Home wireless network connection problems

    What should I do if I normally connect to the wireless network does not appear?  It is not a network card problem, because I can connect to other wireless and school and other places.  I tried to reset the router, ping and by unplugging and seeing what I could understand on the computer at home, but nothing does.  Any ideas or suggestions would be greatly appreciated.

    Thank you.

    Hello

    Have you tried other computers to connect to your router? You use both wire and wireless
    connection?

    Unplug the modem and Router 3 + minutes. And then reconnect the modem - when it is running
    Plug in the router - when it is running - restart the computer. This is known as a hard reset.

    Check with your router manufacturer support.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

  • Factory reset wireless router connection problems?

    Hello

    I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

    This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

    I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

    The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

    Any help would be greatly appreciated.

    I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

    I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

  • Satellite L50-B-07U-wireless Internet connection problems

    I have a laptop L50B07U.

    It says my wireless connection is on and I am connected yet none of my programs or search engine can connect.

    Said its impossible to access the network... help!

    Hi JoeyKangaroo

    Do you also have problems connecting to the internet using the connection to the LAN (network cable)?

    By the way: try to disable the WLan (encryption WPA/WPA2) security in the settings of your WiFi router and connect the laptop to open (unsecured) wireless LANs.
    Then check if you would be able to use internet or not...

    But please don't get me wrong: you must disable the WiFi encryption only for testing purposes! The wireless network must be always well attached!

  • Pavilion dv4-2160us with Atheros AR9285 and D-Link WBR-2310 wireless router connection problem

    NB sometimes has problem connecting to the router. This occurs when the NP is booted from power, or when the connection of power mode after about a day of economy since his last connected. Although the network sharing Center sees the network to connect to, but shows only "restricted access". But if the power to the router is recycled, then the connection is established. The driver for the Atheros AR9285 is up-to-date. The firmware of the router is the latest v1.05.

    A test ping Google permanently on the NB and a computer that is connected to the router to isolate the problem. Whenever Google is ping successfully, it displays a message and the response time in milliseconds. If the ping fails, the message will be "Ping: transmit failed." General failure. "  It turns out that, while the test on the wired computer worked without a hitch, the NB has shown that at the same time, the internet connection was lost during the time of connection. He then recovered after a few 'pings '. At another time, the internet connection has been lost permanently without recovery, also during the time of connection.

    Anyone has the same problem?

    After changing the security mode WPA2 to WEP router wireless, the problem seems to have disappeared. It's been 3 days and the computer can still make the connection to the router. HP support says that HP wireless network adapter works best with the WEP security setting.

  • pro place 8 wireless network connection problems

    I have problems connecting my venue 8 pro to a wireless network. anyone encountered similar to debug and fix issues/options?

    When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  • Wireless Internet connection problem

    My wireless (Linksys) network has not demonstrated, so I then reset my PC and sometimes it will appear. Sometimes it won't and I'll keep Reseting my PC up to what it appears. All that when I go into my network wireless LAN appears as a wired connection. What I do because I need the Internet, it OF my job. Tell me if I don't have this clear enough in the comments! I'll also posts some photos of my connections.

    Thanks for all the help that I read your reply and thought maybe my WiFi chip could have been hit a little bit, then I jumped my keyboard on my laptop and readjusted the chip and then put everything back and booted up my Inspiron... It still doesn't work do not, so just the coincidence, I thought I might have accidentally pressed F2-function, my Internet appeared and I had no problems! Thanks for the work on your answer! :) Now I am able to work again on my own PC.

    See you soon, Mr. Stephen

  • Pavilion dv4 2123 TX: TX HP Pavilion dv4 2123 wireless network connection problems

    Machine will connect to the wireless network, but not connect to internet.

    Have restarted, hard-rebooted and uninstalled/reinstalled all the drivers for network card.

    Any help is welcome!  Thanks in advance.

    Thanks for your suggestion

    I tried link below

    HP PC - troubleshooting your wireless network and Internet access (Windows 7)

    But it does not work.

    It seems to be driver files are corrupted on my machine.

    Came to know that by running the command cmd below.

    sfc/scannow

    He metnioned that some files are not repaired. Please find the journal in the CBS.log file.

    Not sure if the driver network adaptor also get corrupted.

    Please suggest.

  • HP Pavilion dv4 2141nr wireless network connection problems

    Machine will connect to the wireless network, but not connect to internet.

    Have restarted, hard-rebooted and uninstalled/reinstalled all the drivers for network card.

    Any help is welcome!  Thanks in advance.

    Hello:

    See settle an updated wireless driver works for you...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

  • E2000 wireless PPPOE connection problems.

    I checked my username and password again and again. When I try to connect the router to the internet, I get an error message saying IP not given. How can I fix it?

    slushpuppie371112 wrote:

    I checked my username and password again and again. When I try to connect the router to the internet, I get an error message saying IP not given. How can I fix it?

    Who is your ISP? What is the brand and the brand of modem? You are able to go online through your modem? What IP are you on the computer when it connects directly to the modem? It is possible that your modem doesn't require your router to PPPOE mode. Try to set the router to DHCP Auto Configuration.

  • Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

    Hello

    I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
    Wireless Network Connection 4 Wireless LAN adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Double Belkin N + Wireless USB adapt
    Physical address.... : E8-5B-5B-49-DD-CD
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Please help me solve the problem.

    tanks

    Hello

    Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

    I would like to ask you some questions, in order to better understand the issue.

    1. What is the exact model of the Belkin USB adapter?

    2. What is the brand and model of your computer?

    3. When was the last time it was working fine?

    4. Remember to proceed with software or hardware changes recently?

    This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

    Method 1: Run the network troubleshooter

    I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2: Network Wi - Fi problems and

    Follow the Microsoft article on wireless and wired network problems. Click on the link below:

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

    Thank you

  • Wireless connection problems

    my laptop is suddenly wireless LG disappeared from my system, I can not connect to enternet without cable, what do I do?

    missing a piece on the right under the angle of my laptop, I discovered it recently and the WiFi disappered recently too, did play a role?

    Hello

    1. do you get an error message? If Yes, what is the full and exact error message?

    2. What is the number of the model of the computer?

    Method 1:

    First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    Try to update the network drivers and check if it helps.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    For any hardware related questions, I suggest you contact the manufacturer to better support that we do not know what piece of hardware you're talking about.

    If the problem is not resolved, please respond with more information, and we will be happy to help you.

    Thank you.

Maybe you are looking for

  • my phone does not recognize the cardock

    When I plug my phone to car dock, it does nothing

  • Ink system failure error 0xc18a0201

    After installing new ink cartridges provided with HP C7280 all in one ink system failure error 0xc18a0201 occurred.  Cannot find reference to this anywhere error code.  What is this and how can I fix it?

  • I got a message saying that caslexec has stopped working

    I have a message saying that caslexec has stopped working, I don't know what it is and don't know how to fix it

  • WRT54G drops internet intermittently.

    My Linksys router WRT54G has recently (yesterday) begins to the internet after having been online for a few hours. The current configuration is in place for several years.  I started with the broadband provider and they checked the signal and cable m

  • turn on my bluetooth

    I have a presario cq61 computer and there is a bluetooth symbol on the lower bar, but it's a red (and blue) color.  I believe that means that bluetooth is installed on this computer but is not enabled.  When I try to configure it via the control pane