Microsoft comfort mouse 4500 scrolling too fast in games.

Similar Questions

• CONFIGURATION OF THE COMFORT MOUSE 4500 PROBLEM

  Recently had to do a fresh install of the operating system.  Windows XP x 64.  Have Microsoft Comfort Mouse 4500.  Installed the last service pack.  Have now the configuration problem trying to install the mouse driver.  Installation of Intellipoint 6.3 for Windows XP (64-bit) IS NOT LIST Comfort Mouse 4500 as an option to select.  I know it's courable on this operating system, as I had before the recent new facility I run.  Previously, I actually got an automatic update of the Windows Update driver for this mouse (under my previous installation).  Have not yet received the driver update.  How can I find and install it myself?

  What exactly is the 'configuration problem' here?

  Uninstall and reinstall the mouse drivers to see if that does the trick.

  Alternatively, you could wait and search automatically updates via Windows update, since you said that you have previously received an update.

  See you soon!

• Ms. Comfort Mouse 6000 presents itself as Comfort Mouse 4500, so the scroll wheel does not work right.

  Hello, I would like to explain the whole situation.

  I tried already to Microsoft support and they did not / were not able to help.

  I have three mice:

  (1) comfort Mouse 6000 for business, white

  (2) comfort Mouse 3000 for businesses, white

  (3) comfort Mouse 3000 (commercial version), black.

  The 1 and 2 appear in Intellipoint and Windows 7 64 - bit (Devices section and printers) as Comfort Mouse 4500. 3 however presents itself as the correct model (3000). 3. scroll wheel perfectly works (it's instant and smooth). 1 and 2 scroll wheels don't move unless I really push on this issue, and even then it only moves a little at a time.

  I uninstalled however Intellipoint at some point and 1 (tried 2) will work as it should (instant scrolling and smooth), however I can not change the side buttons.

  Any help? Thank you!

  Hello
   
   
  Given that the same problem occurs in different computer, the problem here lies in the mouse. I suggest you to contact the Broken/defective product group for further assistance.
  http://www.Microsoft.com/hardware/en-us/support/contact-us
  Broken or defective products
  
  For the quick replacement of the broken or defective product, call warranty directly: for warranty in the United States support, call the 800-360-7561. For Canadian assistance under warranty, call the 800-933-4750. Or see this article for more information: http://support.microsoft.com/kb/326246

• How to restore a side scrolling for USB Microsoft Comfort Mouse 6000

  My question is quite simple as shown above in the title:

  How to restore a side scrolling for USB Microsoft Comfort Mouse 6000?

  I'm running Windows 7 x 64 professional, and everything went well & smooth (my 16 GB of RAM much help on that) until

  a few days ago when I noticed - after some windows recent updates there is no icon scrollbars appearing when you click the mouse wheel and therefore there is no scroll option in one of the browsers, I use Mozilla or Google Chrome or IE.

  Everything in trying to solve this nuisance, I must say I did a lot of web research.

  I also read and tried all your technicians where suggesting that solutions in the articles:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/facing-issues-with-Microsoft-Optical-USB-wheel/5e4ce992-83e1-460A-8bd2-99ceb1bf0756?auth=1

  and

  http://support.Microsoft.com/kb/303091

  ... Change usb port, haven't set all the default settings, no improved pilot using IntelliPoint 8.2 64 bit for Windows 7, don't have to uninstall/reinstall drivers, have accessed HID service and set it to Auto etc.

  It doesn't help

  Nothing else to try?

  Dan

  PS side that neither on the side of scroll my mouse goes really well (where the mouse has not suffered any material damage or other concerns)

  Small update

  Today I take back my previous Microsoft Intellimouse Optical Usb and that works like a charm, including a scrolling sideways feature smooth

  I must say 2 things:

  1. I replaced it because I wanted a mouse blue laser instead of the red light of the IntelliMouse laser to adapt to the blue of the Razer Lycosa keyboard and now I regret it because vousLe mousey is in possession of someone else family: p

  2. I have test the mouse USB of Comfort 6000 on another PC-work on Windows XP and also not on the side scrolling is so clearly hardware failure of the intermediate wheel after a few less than 7 months

  I'm starting to consider that this 6000 comfort USB mouse (which is not one of the cheapest) was a bad choice because it lasted not more than 7 months, despite a decent use and friendly of TI - i don't play shooters or those games that are material mouse pointing.

  In conclusion: he certainly wanted to consider other mice light blue other businesses that might last longer

  Sorry for my post that you lost some of your time

  so:

  CLOSED TOPIC

  Hi Dan,.

  I appreciate the efforts you have made and I thank you for sharing the information. Your comments would probably help some users faced with a similar question.

• How can I reduce the DPI of my "Microsoft Comfort Mouse 6000"?

  Is this possible? I installed the drivers, but the only thing I can do is the remapping of keys.

  Ok

  First of all, my experience tells me that maybe it's that you have installed the wrong driver. Please can you tell me exactly what that driver you have installed for 'Microsoft Comfort Mouse 6000' and where you got to?

  Second, if this is the correct driver for the Setup programs start menu look.

  Microsoft Web site implies that the latest intellipoint (mouse from Microsoft software/drivers) is probably 8.15...

  http://www.Microsoft.com/hardware/en-us/d/comfort-Mouse-6000

  If this isn't what you have installed and then try and see what happens.

  Please mark this as useful or response if applicable.

  Tricky

• Microsoft Comfort Mouse Sculpt has stopped working suddenly.

  Hello, my mouse Comfort sculpt stopped working all of a sudden. I wrote my notes in Notepad and after some time when I tried to start the mouse it does not work. Tried to replace the batteries, but of no use. Updating drivers did not help. Sculpt keyboard works very well. I tried on two machines and having the same problem. The blue laser light under the mouse is dead. However, when I turn on the mouse (power on) the blue light flashes for a second. Not sure if it is a hardware problem. I bought this mouse in January 2014 and worked great until today! Help, please.

  Hi Jordan,.

  From the description of the problem, it seems that it's a hardware problem. I would say contact Microsoft hardware support to improve assistance about the issue you are facing with Microsoft Comfort Mouse Sculpt.

  
  

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  For more information on how to replace or upgrade to Microsoft, hardware software and manual, click on the number below to view the article in the Microsoft Knowledge Base:

  326246 how to replace Microsoft software or hardware, order service packs and upgrades and replace product manuals

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Title scrolls too fast

  I'm on first Elements 9 and adds a title scroll in the menu title. When I play back the frame, the title scrolls too fast to read the credits. I lengthed the timeline in the timeline using the tool of time Scretch, but this just adds virgins pictures before and after the scrolling credits. Credits not only stretching and slow, scrolling at the same speed in a sandwich between the beginning and end of the empty frames. Any thoughts?

  Welcome to the Forum.

  Steve you given the method of increasing the duration of the title - just a click + drag on the tail, to get the necessary length. This will also slow down the animation title predefined Roll.

  If it still does not give you what you want, about the speed of the roll of the title, I suggest to remove this preset (it is easy to apply, but limited in the control) and instead of using the fixed effect > Motion > Position and Keyframing, which sets the effect manually create the roll. Steve nicely covers Keyframing in his tutorials Keyframing base to Muvipix.com. I highly recommend to go through this tutorial several part, the concept of keyframes can be intimidating to everything first, but all time spent to get in tune with them, will pay dividends over time. Keyframes can be applied to most of the effects, all two fixed or added.

  With the movement > Keyframs Position, we can control the speed of the roll, can pause, if you wish, and can then animate to roll offscreeen. Several effects can be touch-ups on the same title too.

  Although easy to apply, I don't remember the last time I used one of the animation Presets, because key frames offer an infinite control.

  Good luck and let us know if you have any questions about keyframes, after reading the tutorials of Steve.

  Hunt

• Microsoft Mobile Mouse 3500, scrolling problems

  I bought a Microsoft Mobile Mouse 3500 target a few months ago and it works great so far. When I scroll it jumps a long distance and is not smooth. I tried to lower the speed of scrolling in the mouse settings, but it does not fix it. The only way I can break free, it is by downloading an app on the app store for Google Chrome (I don't know the name of the application). Help, please. Thanks in advance.

  Unplug the receiver to the usb port.   Plug it in again.

  I can only conclude this is a bug in the firmware/hardware and the receiver must be restarted.   It has nothing to do with the drivers because it happens with windows, osx and linux.

• Microsoft Comfort Mouse 3000 mouse wheel click on the problem

  Hello

  I just got this mouse today and really like the shape and the weight of it, however I have a major problem - click wheel mouse only works to a certain (very uncomfortable angle) and even in this case, not all the time. I installed the drivers and all...

  .. sure you can not help me with anything whatsoever, so I'm going to exchange it for a different mouse to the store in the next few days, unless the problem disappears

  .. That's all :(

  Hi pas0003,

  If it works, try the steps and check them off below.

  (a) check the connection of the mouse. If the mouse is connected via a USB port, make sure that the cable is not loose. Push the USB connector to make sure it is sitting comfortably. If the mouse has an older serial port connection, make sure that the connector has not become loose and check the pins of the serial port for any signs of damage.

  (b) plug the mouse into a different port on the computer and test. The port may be damaged or the computer can recognize is no longer the mouse into this port.

  (c) inspect the cord of the mouse for signs of damage and make sure that the cord has not broken loose from the end of the USB connector or the mouse itself. If the mouse wire has been broken or the wires are are spare at each end, the mouse may need to be replaced.

  (d) clean the mouse. A mouse that uses a ball to track needs frequent cleaning. Unscrew the plastic ring on the underside of the mouse in the direction indicated by the arrows on the mouse. Remove the mouse ball and clean the ball and inside the mouse, paying special attention to the small roller inside the mouse. Use a cotton swab or a clean non fluffy towel and a small amount of rubbing alcohol. Let the parts dry, then reassemble the mouse. It should run more smoothly.

  (e) check the mouse settings. Click on the 'Start' button on the computer, and then click "Control Panel." Depending on the operating system, you may need to click "Settings" first go to the "Control Panel". Click on "mouse". Review the settings on the various tabs to see if changes are needed to solve the problems.

  (f) uninstall all hardware or software newly added. Check the performance of the mouse. If the problem is resolved, there may be a conflict with the mouse and the new program or hardware.

  (g) put end to the program you are working and you restart the computer. If a user clicks on the mouse too many times in quick succession, the memory of the computer may freeze, which in turn freezes the mouse.

  (h) examine the lock button for a mouse integrated on a laptop. If the mouse stops working, we can get key lock, usually located just above the mouse button. Press the button to unlock.

  If the previous step fails then you can go ahead and return the mouse to get a new one, as there may be a problem with the mouse itself because it is news.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Scroll too fast on java applications

  After update to sierra applications that use java in my case Intellij or even the java Control Panel, have increased the speed of scrolling. I use the trackpad so I don't know if the problem occurs with a mouse too. I tried to slow down to a minimum on the accessibility implementation, but it had no effect on java applications. It became really difficult to work. Is there a new setting that I should do or perhaps a work around?

  This is a bug in the JDK: https://bugs.openjdk.java.net/browse/JDK-8166591

  Explanation:

  It looks like the JDK question and is reproducible with a JList with simple scrolling. Sierra generates many more events than El captain. These events contain values ~0.1 planned instead ~ 1. But Java converts these small number 1 in any case.

  There is no solution except wait that Oracle will fix it.

• How can I speed up my middle mouse button scrolling?

  When I try to scroll down using the middle mouse button, it goes so slow I can't, so I use the scroll bar to the right. It's embarrassing for me. When I reset the button of the mouse on my windows to multiple lines, it allows to scroll too fast for my docs, but does not affect the scrolling in FireFox. I have looked for tools and options for this and cannot find anything to do about it.

  You can try to change one (or two) of these hidden parameters:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the wheel and take a break while the list is filtered

  (3A) double-click the preference mousewheel.default.delta_multiplier_y and type a higher value to each movement of the wheel to cover more ground. For example, you can try 300 or 500. You can keep this tab open and to experiment with scrolling in a different tab until you find a value that gives you the speed you are looking for.

  (3B) double-click the preference mousewheel.system_scroll_override_on_root_content.vertical.factor and type a higher value. For example, try changing from 200 to 500. You can keep this tab open and to experiment with scrolling in a different tab until you find a value that gives you the speed you are looking for.

  I'm not sure I understand the reason why there are two such similar tariff preferences. One of them do you want?

• Scrolling the mouse resets too fast at every reboot

  I have a Microsoft Explorer Mini Mouse (although I think that the mouse model is not relevant).  The scroll wheel is moving too fast. The smallest button jumps a whole page or more.  My normal solution is to go to control panel-> mouse-> wheel control and adjust vertical speed control to something very slow, like 8 (of 40).  This works until I restart the laptop (Win 7 Enterprise).  Since it is a laptop, it means that I am at least once a day.

  I tried to change some registry settings, but nothing seems to work.  Is there an official solution from Microsoft for this?

  Hello

  Have you made changes on the computer before this problem?

  I suggest to check the following methods and check if it helps.

  Solve problems with the mouse button or scroll the parameters: http://support.Microsoft.com/kb/303091

  Troubleshoot a wireless mouse that does not correctly: http://support.Microsoft.com/kb/321122

• Microsoft Mobile Mouse 3000 lock as I am scrolling

  original title: Microsoft Mobile Mouse 3000

  I have this mouse model 1359 and he became addicted to my desk at work. It doesn't seem to work well at all and was wondering if it the wrong kind of mouse for a desktop computer. It crashes as I am scrolling and I spend the time stirring my mouse to do by moving and it also seems to jump over things. It happened on multiple computers. Ive tried to move the connection to a different usb port and it doesn't seem to help. Very much a pain, please help

  Hi KrystalNicolaides,

  ·         Did you the latest changes on the computer before this problem?

  ·         You receive an error message?

  ·         What version of windows operating system is installed on the computer?

  I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  http://support.Microsoft.com/kb/838398

  Method 2: Try to change the mouse settings. See the article.

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

• Microsoft sculpt Comfort mouse

  Tried to install mouse Microsoft Comfort sculpt on Aspire V - 571P but only the works of blue button (mouse is supposed to work with Windows 8). Microsoft says problem with version of driver bluetooth Broadcom and version must be 12.0.0.5200 or later version

  http://support.microsoft.com/kb/2865342/en-gb . Mine is earlier, but trying to put up-to-date driver he says latest version installed. Can anyone help with a solution or a link to a download for a 12.0.0.5200 or later?

  I did a PC Refresh (PC config / General) and later the mouse worked OK. Just had to reinstall the software.

• My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?

  My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken.  This seems to be the only program with problems. All the answers?

  Hi retiredinflorida,

  Welcome to Microsoft Vista answers Forum!
   
  It is a known issue using IntelliPoint from Microsoft and Quicken software drivers.  Both parties are aware of the problem and as soon as a hotfix or patch for this problem is available it will be displayed on the Quicken Web site so check with their website on a regular basis.
   
  However, if the Microsoft Wireless Mouse 5000 problems in other applications, you can check the links below.

  The Microsoft wireless mouse does not work as expected if:

  You may want to consider this link to fix the problem: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 838398

  In the case want ot uninstall and reinstall the mouse drivrs use this link: http://www.microsoft.com/hardware/windows7/support.mspx

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
  what you think