Microsoft Updates system restore

Similar Questions

• Windows Installer, iTunes, Windows Update, system restore not working under Vista

  For the last few weeks, I deal with an inability to install new programs in Vista, and I was unable to open the system or iTunes restore not in Mode without failure.  I can't install the windows updates that were downloaded, nor my laptop (Sony Vaio VGN-CS215J) will close properly.  I tried the system restore and used to let me open for a bit, but now iTunes that no longer works.  Occasionally, when my computer starts, it loads only for blacks and not go any further.  I run Kaspersky Anti-virus and used to run Spybot S & D (which is more open) and can't find anything that will solve this problem.  I can't properly download/install updates http://www.microsoft.com/windows/downloads/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4 and delete the temporary files have not helped.  I don't know if I have a lemon of a computer or what happened, but any help would be greatly appreciated.

  Hello CWilson13,

  Welcome to the Microsoft Windows Vista Forum.

  I would like to ask you a few questions.

  1 > what happen when you try to restore the system to normal mode?

  2 > are you an error when you try to install updates from windows update?

  3 > you get an error during the installation of other programs?

  About the judgment issue please check if you are able to stop the laptop in safe mode correctly. If Yes, then we must verify the issue by performing a clean boot. Clean boot will help us understand if the problem is due to third and put into service or services.

  The steps to do a clean boot is given in this link:

  www.support.Microsoft.com/kb/331796

  You can also download the latest pack of windows install 4.5 and try to install programs.

  The link for windows install 4.5 is:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Regarding the Itunes I suggest to uninstall Itunes and Quick time to the computer and download the latest being and install it after installing windows install 4.5.

  I hope this helps. Please let me know about the results so that I can help you.

  --------------------------------------------------------------------------------

  Kind regards

  Shaolin Roger Thapa

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot download Microsoft updates after restoring my computer Windows XP back to factory settings

  I had to restore my computer windows xp to its factory settings.  Now, it will not download updates.  What can I do to fix this?  I want to download the Service Pack 3 and other updates.

  Hello!

  After reformat the computer and you have all the drivers installed.
  try to download and install SP3 manually and then install all updates from Windows Update
  Here you can see the download link for SP3:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  See you soon!
  Makoi

• Disable Windows 7 - connection Wi - Fi updates, System Restore will fix the problem

  Automatic update on 17/01/2011.

  Killed the wireless on Asus M51vr

  updated earlier, now works fine.

  How can I stop this update of his return.

  You change the Automatic Updates settings so that a prompt to download (or install) the updates rather than do it automatically. You can then choose to install updates and when.

  writing in the new message: * e-mail address is removed from the privacy... *

  Automatic update on 17/01/2011.

  Killed the wireless on Asus M51vr

  updated earlier, now works fine.

  How can I stop this update of his return.

  Mayor Graham - Word MVP
  www.gmayor.com
  Posted by bridge communities
  http://communitybridge.codeplex.com/

• Is abandoned on windows 10 - was a lot of work before Microsoft update system for Windows 10

  After the update to windows 10, photoshop is abandoned.

  Adobe Photoshop CC 2015 has stopped working

  then the program closes

  Dave

  Have you guys tried a complete uninstall/reinstall of Photoshop itself again? It is not out of the realm of possibility that something happened during the upgrade to Windows 10. (I had no problem with the CC apps myself, but I had problems with other applications).

• Accidentally delete system restore on Task Scheduler calendar

  I tried to change the frequency to create a system restore point in the Task Scheduler. It is located in: Task Scheduler Library > microsoft > windows > system restore, but I accidentally delete the task (not the folder) and I don't know how to recreate. Can someone help me how to solve this problem or please post the correct setting of the task, so I can recreate it manually.

  Hi Aziz Fauzan,.

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to create system restore on Task Scheduler calendar

  By default, System Restore will run as a scheduled task in Windows 7.

  1. open the Control Panel / Administrative Tools / Task Scheduler.

  2. expand Task Scheduler Library / Microsoft / Windows.

  3. scroll and select System Restore in the left pane.

  4. in the right pane, double click on the task of SR to open the configuration dialog box.

  5. click on the triggers tab.

  6. This displays the regular settings.

  7. using the buttons at the bottom of the dialog box, you can modify, delete or create a new scheduled time.

  See also:

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows7/schedule-a-task

  : http://support.microsoft.com/kb/939039/en-us (also applies to Windows 7)

• Microsoft Security Update 11/01/2012 installed including Service Pack 2 and now start the computer fails. No Windows security, no system restore.

  Can't start at a fixed point to the password screen. Goes to a blue screen and try to restart automatically.  When you run safe mode cannot use the system restore, have no security of windows, so does not automatically restart when the change is made impossible to read.  Norton 360 found two viruses at the origin and the fixed, no viruses detected in recent failure.

  Hello

  You can use the full version of Windows Vista installation disc and try to perform a restore of the system, the Windows recovery environment and check.

  For more information, you can consult the following article ot.

  What are the system recovery options in Windows Vista?

• Update system Windsor 0x800A0046 error and System Restore does not.

  I think my computer is sick.

  I can't update Windows XP SP 3.  I get the same error 0x800A0046.  Automatic Updates does not work either. When I run the system restore, I can't stop pck a restor point I get a hourgalss and just process, no warning or messages.

  I tried all the patches on the Microsoft Web site, and none of them work.  I also scanned for viruses and malware, and nothing is detected.

  Any help would be appreciated

  MYT,

  What are the causes of error 0x800a0046 0x800a0046http://www.updatexp.com/ .html>

  December 16, 2005 when looking for updates available on the update site, you receive the0x800A0046 error. http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=20&LN=EN>

  February 7, 2006 error message when you visit the Windows Update Web site or the Microsoft Update Web site: "0x800A0046" http://support.microsoft.com/kb/910338/en-us>

  July 2, 2010 you may receive an error message when you search for available updates on the Windows Update Web of the site or on the Microsoft Update Web site http://support.microsoft.com/?kbid=883821>

• Error code Windows Update 800700 B & System Restore 0x80071A91 error

  Cannot install critical system updates.  Download the update error 800700B.  Manually and through MS FixIt ran the command fsutil resource setautoreset to clear/clean line newspapers.  Has not fixed the problem.  Through research found related error on the system restore.  Am unable to create a restore point and 0x80071a91 error.  A run the command-line recommended by MS to address, cd /d %SystemRoot%\System32\SMI\Store\Machine
  attrib s h *.
  del *.blf
  del * .regtrans-ms

  and get an access error:
  C:\windows\system32\smi\store\machine\schema.dat{d3e605ee-4C71-11de-be3f-001d609310af}. TM.blf
  The process cannot access the file because it is being used by another process

  Any ideas?

  Currently no anit-virus software, but recently (within 2 months) not uninstalled Mcfee... I'll try to get more details from the owner about the software was previously installed Antivirus

  You don't have to bother. This is not good. :(

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB (flash drive) or the SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application. [1]

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ==============
  [1] I recommend Avira AntiVir & Microsoft Security Essentials (both free) and NOD32 & Kaspersky Anti-virus (not the "suites").

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to get the updates, or use system restore.

  Downloaded Microsoft Essentials to help solve the problem, but it cannot update the computer.

  When I went on the microsoft Web site for updates and it gives me this error 0x8024D007 code and the website has encountered a problem and cannot display the page I'm trying to show.

  When I go to the system restore option, I get a message that says: "system restore has been disabled by group policy. To turn on system restore, contact your domain administrator. "The computer is a personal computer and not on a network with a domain administrator.

  Automatic updates is enabled, but it is not working properly.

  Is there a way to solve this problem and start the update of the computer again without formatting the hard drive, or reseting back to factory settings?

  Downloaded Microsoft Essentials to help solve the problem, but it cannot update the computer.

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite has been installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE? [1]

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ===================
  [1] will install MSE clean my computer already infected?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• System restored automatically after the installation of updates & a few missing desktop icons.

  Original title: same set of updates on both computers due to different problems, one problem being a system restore.

  I have two Windows 7 computers in my house.  They all have two problems after installing updates a month ago.  The problem for 'Computer 1' is a bigger problem than the problem of the "Computer 2".  2 computer problem not really seems to be a problem now, but I'll give you the information for comparison purposes. Sorry for the length of this post - I am trying to be thorough.

  1 COMPUTER DETAILS:

  News of the computer: Dell Studio 1745 laptop computer running Windows 7 Home Premium 64 bit, six months at the time of the problem, now age of seven months. It came with Norton pre-installed, never used and uninstalled.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Background: set up with a single account (Administrator, of course) and after a few days of putting in place computer, said ale user account for everyday use.  Computer is configured to warn me before downloading/installation of updates of Windows, with permission for each type of account to install Windows updates.

  While in the standard account, I welcomed these download/install updates and was prompted to restart the computer.  I was done with the computer, so I just closed instead of restart.  According to "Your update history Review", it's updates and they were all successful:

  Update for Windows 7 for x 64-based systems (KB980846)
  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
  Update for Windows 7 for x 64-based systems (KB982519)
  Update Microsoft .NET Framework 3.5 SP1 for Windows 7 and Windows Server 2008 R2 for x 64 systems (KB982526)
  Cumulative update for Media Center for Windows 7 x 64-based Systems (KB981078)

  After you turn on computer back, everything seemed normal.  I opened Firefox and I got a notice that Firefox has an update is available, a standard user cannot.  Unlike some programs, there is no popup to sign as an administrator, so I went to start > switch user and signed as an administrator.  (There was no update of Firefox at this point - just a switch single user.) That's where the problem appeared: instead of normally load the admin Office, I had to wait while Windows configured my desk (it's new)... wait... wait... wait... wait... BAM!  Your computer has been successfully restored * insert date here * (I don't remember what it was - January of this year, perhaps - because I was so incredulous that it happened and I continued to watch the game "successfully restored").  I do not have the computer to eat, and it don't has not asked me if I wanted to restore it.  He just did, just on its own initiative, when I went on the admin account.  A bunch of shortcut icons are missing from the Office of the admin acct and the ACCT. standard, and wallpaper to the admin account has been changed.  I am not absolutely sure if nothing else was touched.

  I have searched online to try to understand why it happened, and I remember well from my only find, is that if I went to the restoration of the system, there will be an option to cancel it, but I don't see such an option. So I told the computer to eat on a few days to a week before that updates.  It doesn't seem to help.  Shortcut icons are still missing.  Looked at the update history and it shows the five latest updates as being installed successfully, but Windows Update tells me that I need to these five updates AND this time, the little check marks are only already there on four of the five updates listed.  (The first time, the little checkmarks were already there for all five.)  This is the update that is NOT now pre-checked:

  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)

  Do not reinstall the five updates.  I don't know if I should jump install them again, or if I should install only the
  now, four are already "pre-checked."  I'm very hesitant to install KB982670, because this update seems to be the likely cause of the problem given the fact that it is already pré-coché in the Windows and the following information updates for computer 2.

  Since I installed the latest updates for 1 computer with no apparent problems:

  X 64-July Windows malicious software removal tool (KB890830) 2010
  Update security for Windows 7 for x 64-based systems (KB2032276)

  NEWS ON COMPUTER 2:

  The computer news: Systemax desktop running Windows 7 Professional 64-bit, a month at the time of the problem, now age of two months.  It has not come with any pre-installed antivirus.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Reminder: Set up immediately with an admin account and a standard account for everyday use.  Computer has been set to automatically download and install updates for Windows, but is about to inform me first.

  At the time of the problem above with the laptop, desktop computer has been enabled.  As all loading,.
  an error message came that there was some kind of issue with the .NET framework.  At another person asked if he knew what was up with that, and it didn't.  Did not note the specific message, thinking he would tell me again if there was a real problem.  I thought it could have been some kind of Windows hiccups when starting the computer, not even knowing about update problems.  I have yet to see this message.  After the number of laptop (computer 1), I took a peek at the desktop computer (computer 2) to check that Windows Update and I saw that an update is available, which is the referenced above same update that the notebook had already the check mark in its box (KB982670), which gives me the choice to check the little to install it.  Very curious, since, as already mentioned, the computer has been configured to automatically download and install Windows updates.  Looked at the update history, and it has already downloaded and installed the other four updates that the laptop has been.  Changed the automatic Windows Update setting to warn me before you download and install updates.  I have not installed the missing update.  Said the only other person in the House who would probably bother install updates to not install it.

  A month later, 2 computer has a notification from Windows update that 21 or 22 updates are available (as a result, by clicking on the icon of the trial of Microsoft Office).  The update not installed a month ago is no longer on the list, and update history shows as having been installed a few days before, apparently because someone else in the House must have thought it looked like a good idea.  I installed all the 'important' updates and have not seen any more problems with computer 2.

  BACK TO THE COMPUTER 1:

  Yes, is there anyone with ideas on how to get 1 computer back to its state before the 5 updates listed above, and what to do about to reinstall some or all of them, I hope, without more problems, for example a random food system does not happen?  I have a feeling I will say that the random system restoration do not occur, but he did.

  Thanks for any help.

  No, I don't use the Norton removal tool.

  IN RE COMPUTER 1 ONLY:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 for good measure, reset Windows Update by...

  How to reset the Windows Update components?
  -Online skip the section to APPLY to; KB971058 access via I8 32-bit only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will delete your update history (but not list updates in the updates installed)

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install updates after you perform a system restore

  I did a system restore on my laptop because vista froze to the loading of desktop screen and now Windows Update stopped working. In addition, the windows update window was damaged since only a few icons without text and is not allowing me to update manually as well. How can the problem be solved?

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• System Restore and security updates

  A did the system restore for a March 22, 2010, as Windows Explorer had become deadly slow and I was unable to determine why. Seems fine now.

  My question is:

  Do I need to download and install new updates of security for Windows XP (professional sp3) published since the date of the system restore?

  Since the restoration Sys, add/remove programs list not the updates made since February 10 except for fix - update of safety and KB979306 - KB975561) while Microsoft Windows Update Online Service lists 20 people or more who have been previously downloaded.

  I'd appreciate it if someone could shed some light on this for me.

  Thank you.

  Yes, automatic updates is enabled. When I ran a manual check for updates through the http://windowsupdate.microsoft.com earlier today, some optional updates and as a bet to critical update - security update Cumulative for IE8 for WinXP (KB980182) - was listed so I downloaded and installed without problem. And you see it in the Add/Remove Programs list.

  My security services (Radialpoint) software is complete and up-to-date. I agree by my ISP. No other security/antivirus application is on my system.

  .... After looking closer - research on the site of microsoft for some of these updates and looking at the list of updates for my computer from there, it seems actually I could have all the critical updates.  And this long list updates at the end of March, were updates of the previous month.  I guess it is related to the 'unknown' question that I start around March 26 or more.  A question that I don't know led my Permissions being stripped - a lot of access denied.  Maybe that's why.

  If all goes well, everything is ok now and "fingers crossed" that won't happen again. I'll monitor the automatic updates and do a manual check from time to time to ensure that everything works as it should.  Receive your answer.

  See you soon.

• After windows auto updates can't open Internet Explorer, but can open firefox. Vista Home Premium, CA Security Suite. Can do system restore and get on, but it will update the next day and problem reports.

  I get a popup to firewall this tells me Internet Explorer tent to access internet I click on allow but get no results. Then I get this page can not be displayed, and you are not logged as an administrator

  Hi Snoopy65,

  Welcome to the Microsoft Answers site!

  Perform a system restore and then try to install each updates manually one by one. Each time that you install the update, restart the computer. Take note of the update that is causing the problem and let us know. We will be in a better place to help you if we know the exact update which is causing the problem.

  To run the system restore

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After a system restore... NO UPDATE WILL DOWNLOAD!

  OK... I had some problems and had to do a system restore. Now that my computer is in place and runningI cannot get updates for updates to download to Windows Defender, Internet Explorer or Windows Vista. I'm only running a HP2745se purchased in Feb 08. Also, I went through all the methods on this support page and nothing worked (http://support.microsoft.com/default.aspx/kb/836941).

  Thank YOU - Dana

  Hello

  Error messages? Any KB trying to download? What happens when you run Windows Updates?

  Do the two of them:

  How to reset the Windows Update components? a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.